Thrustmaster T-LCM Performance Brake Mod Kit By APEXV2R | Review

  Рет қаралды 9,790

Dori_N

Dori_N

Күн бұрын

Пікірлер: 49
@T0n189
@T0n189 3 жыл бұрын
Ordered the mod yesterday, luckily found your video now I feel better because you explain exactly what I hoped this mod work. Now time to wait (I live in Italy). Thanks!
@Daisudori
@Daisudori 3 жыл бұрын
how is the mod?
@theonlylolking
@theonlylolking 3 жыл бұрын
@@Daisudori You will need really strong legs. Even Dori_N's setup is very heavy. I mean I guess his showcasing that with 100 force, 100 RAW = 100 FINAL should be a clue, but it is a huge difference from T3PA and even the heaviest T-LCM. The mod is very smooth and progressive, but again. You will need strong legs.
@חגיתהחגיגית
@חגיתהחגיגית 3 жыл бұрын
Amazing new studio you got there 😁 love it
@ChrisTingman
@ChrisTingman 3 жыл бұрын
I made this :) glad you like it! Great review as well buddy
@DoriN12
@DoriN12 3 жыл бұрын
Oh, very cool 😎 Yeah, I can't go back to springs now haha
@ChrisTingman
@ChrisTingman 3 жыл бұрын
@@DoriN12 yeah I'm the chris you were emailing with originally :P nice to see your finished product. maybe I'll send you some RST stuff in the future for review
@DoriN12
@DoriN12 3 жыл бұрын
@@ChrisTingman aaannnd I'm just seeing this now, lol I'd be happy to test stuff out
@travisburdess1071
@travisburdess1071 3 жыл бұрын
In the final example of double red springs, just adjust the slider thats set at 100 in your example, and you can dial in any amount of braking % you want at the end of travel.
@benjaminduncan4286
@benjaminduncan4286 3 жыл бұрын
Finally received mine today, will try them out tonight after work 😁
@DoriN12
@DoriN12 3 жыл бұрын
Hope you like it!
@benjaminduncan4286
@benjaminduncan4286 3 жыл бұрын
@@DoriN12 completely different feel to the springs. Didn't take much to adjust. Thanks for the video on these. I would never had known otherwise. 🤜🤛
@warrenhenry3972
@warrenhenry3972 2 жыл бұрын
Just got them. I love them already
@jimijames95
@jimijames95 Жыл бұрын
Nice review but I wish you would have shown us how you change them out on the load cell. (My T-lcm brake pedal broke so I have it held together with tie straps and electrical tape.)
@mrcael1887
@mrcael1887 Жыл бұрын
I know this video is old, but I hope you can answer. It's interesting to watch the different options be applied and watch the pedal get to 100% with less and less travel. Is that because of the loadcell? If so, how does that actually work? Why is it that you travel less but hit 100%? Is it not based on how far the silver rod goes down?
@P_ounds
@P_ounds 3 жыл бұрын
I'm wondering if skateboard bushings would work the same?
@benjaminduncan4286
@benjaminduncan4286 3 жыл бұрын
Just ordered, take 4 weeks to get to me in Australia 😭😭 any chance of a FFB etc video for the thrustmaster 🙃
@DoriN12
@DoriN12 3 жыл бұрын
Awesome, I think you'll like em, I currently have two guides for ffb settings for Thurstmaster, one with and one without irffb. kzbin.info/www/bejne/i5fNmpyon7pqhc0 kzbin.info/www/bejne/kKmoeIGVp5aSpJY
@benjaminduncan4286
@benjaminduncan4286 3 жыл бұрын
@@DoriN12 thanks Dori_N , I'll have a look and see how I go 👍
@phatfel
@phatfel Жыл бұрын
I noticed in your videos you went with purple white and black. Did you keep the brake force at 100?
@DavidGarcia-oi5nt
@DavidGarcia-oi5nt 3 жыл бұрын
I just ordered these and hope they were worth the money! This was a great review video for it being your first! What kind of well is that? Is that one of those Simcore wheels?
@DoriN12
@DoriN12 3 жыл бұрын
I've been using them for about 4 months now and they started to feel a bit clunky, like the travel has gotten a bit choppy, I've yet to check if it's because they tore on the inside, but I suspect that might be the case. That being said, they still do the job, and I have a spare set if need be. My wheel is Thrustmaster 488 challenge rim, on a ts-pc base.
@ChrisTingman
@ChrisTingman 3 жыл бұрын
@@DoriN12 They come with a lifetime warranty. Email Apex they'll send you a new set. That goes for anyone
@omaior20
@omaior20 3 жыл бұрын
Hello, how long did this mod take to arrive? Did you pay any import fees? Did the break pedal get progressive enough to justify 65$ for 4 pieces of rubber?
@ChrisTingman
@ChrisTingman 3 жыл бұрын
Depends where you are. In north America probably a week give or take, other continents might take a little longer. They put like 1/3rd of the 60$ towards shipping so whatever the fastest option is around 20 they go with that. They're very responsive to messages just reach out to them and ask
@DoriN12
@DoriN12 3 жыл бұрын
What Chris said 😁
@benjaminduncan4286
@benjaminduncan4286 3 жыл бұрын
Hi dori_N, what would the reason be that my pedal calibration tool is not registering my pedals. Please plug in device. And advice wild be great.
@DoriN12
@DoriN12 3 жыл бұрын
umm, does it recognize them in sim but not in the tool? if so it sounds like a problem for Thrustmaster support as I have no idea...
@benjaminduncan4286
@benjaminduncan4286 3 жыл бұрын
@@DoriN12 yes sim has always worked fine. Just the tool does not pick it up. Ill contact support. Thankyou for the reply
@calvingsc
@calvingsc 3 жыл бұрын
You have to use the included USB cable. You can't calibrate it with just the T-LCM connected to your wheelbase via the RJ12 connector.
@benjaminduncan4286
@benjaminduncan4286 3 жыл бұрын
@@calvingsc thanks bud. I eventually figured that out . Ha. Cheers for the reply
@ThisKory
@ThisKory Жыл бұрын
A year, later is this still holding up? How long did they last?
@DoriN12
@DoriN12 Жыл бұрын
they did last, but I'm using the sim-3d elastomer kit, feels nicer!
@stratcat3216
@stratcat3216 3 жыл бұрын
It seems like it's a case of what you get used to? I dunno.. just thinking that makes sense lol
@EmmanuelVivien
@EmmanuelVivien Ай бұрын
je voudrais un lien pour les acheter s
@Kilb-ill
@Kilb-ill 3 жыл бұрын
Do they ship to Germany?
@DoriN12
@DoriN12 3 жыл бұрын
It says worldwide on their website so I'm pretty certain they do 🙂
@ApexV2R
@ApexV2R 3 жыл бұрын
Yes we do :)
@cirebackwards1
@cirebackwards1 3 жыл бұрын
Wow! Maybe I got a later version of the T-LCM because I have 2 red, preload with 3 washers and I tap the end of travel at exactly 100% of brake force (yes, brake force 100). The preload is entirely limited with 3 washers. I really had to push down hard to get the springs into the pedal.
@dominicrobertdillonbrown9938
@dominicrobertdillonbrown9938 3 жыл бұрын
buy yourself a set of m6 rubber spacers off ebay they will be far too hard to use as they are 90A hardness. Then bond them down to a flat board and make a small plastic wall around to make a mould tool, buy some casting silicon about 1-2kg kit pour into the mould tool degass if you got a degasser. allow to cure then peel back the silicon mould. Buy some urethane casting rubber ideally in 200g kits buy 30A shore, 40A shore and 50A shore, then you can mix and pour into the silicon mould, spray some glass (tough) or smooth plastic with wax or beeswax and lay on top of the tool to ensure a flat surface...and voila a ready made mould to cast as many as you need in various hardness. Trust me these will be FAR superior feel to 3D printed parts. These will be fully cross linked polymers NOT layer fused printed parts this will give an even better feel. Want any advice ask i am an experienced caster.
@DoriN12
@DoriN12 3 жыл бұрын
As I started reading this, it looked like a bomb making manual haha. I would love to test those out though for sure, did you make any?
@dominicrobertdillonbrown9938
@dominicrobertdillonbrown9938 3 жыл бұрын
@@DoriN12 Hi buddy no I got the spacers and already have silicon will order some PU next week but am finishing off my rig this week, there is a big difference in cast polymers compared to printed ones, mainly lifespan under high compressive loads printed ones have spaces and microvoids all be it very small where as cast ones are fully cross linked closed manifold units so over time wont degrade and also should feel more regulated under load due to correct mechanical properties
@DoriN12
@DoriN12 3 жыл бұрын
Good luck with building the rig! And when you do get around to making them, I'd be happy to purchase them off ya, be interesting to see the difference between printed and mold type mods.
@jeffreytackett3922
@jeffreytackett3922 2 жыл бұрын
You know how to avoid the "I don't know, I'm not very good at words" situation? Write an outline of what you plan to say, beforehand. Identify some applicable phrases and adjectives that apply to the product, and use them when the time comes. Take it for what it's worth.
@Jonah-Hosein
@Jonah-Hosein 3 жыл бұрын
Pretty sure the loadcell in the tlcms have a 200kg loadcell
@DoriN12
@DoriN12 3 жыл бұрын
No sir, 100kg confirmed 😊
@aeppikx
@aeppikx 2 жыл бұрын
65 $ for 50cent materialcost of 3d print. ridicolous
@DoriN12
@DoriN12 2 жыл бұрын
was 50$ at the time iirc, either way, there are cheaper solutions out there rn. I'm using sim3d's elastomer kit and it feels great, much cheaper too.
@aeppikx
@aeppikx 2 жыл бұрын
@@DoriN12 i just buy 15€ spool of tpu and 3d print it myself ;P
Fix the Thrustmaster TLCM Brake with this mod
6:52
random callsign
Рет қаралды 52 М.
Каха и дочка
00:28
К-Media
Рет қаралды 3,4 МЛН
The evil clown plays a prank on the angel
00:39
超人夫妇
Рет қаралды 53 МЛН
She made herself an ear of corn from his marmalade candies🌽🌽🌽
00:38
Valja & Maxim Family
Рет қаралды 18 МЛН
Thrustmaster T-LCM Brake Mod Kit by DNutStuff on Etsy
3:56
The Simpit
Рет қаралды 10 М.
F1 Car vs Rally Driver | How fast can you go in ONLY 10 laps?
10:41
Red Bull Motorsports
Рет қаралды 1,7 МЛН
Thrustmaster T-LCM Load Cell Pedals Review (Stock Pedal Comparison)
14:12
3 Hours vs. 3 Years of Blender
17:44
Isto Inc.
Рет қаралды 6 МЛН
GT7: LSD Tuning: Everything Explained
9:41
Doughtinator
Рет қаралды 132 М.
3 Tips to take the maximum of your Simracing PEDALS
7:12
Race Beyond Matter
Рет қаралды 55 М.
How to use a Thrustmaster T-LCM pedal with a Cammus C5 on PS5
7:53