Tap to unmute

Is This The BEST Milwaukee Jigsaw Yet? Milwaukee M12 Fuel Jigsaw review

  Рет қаралды 31,471

Tools & Stuff

Tools & Stuff

Күн бұрын

Пікірлер: 70
@9421samuel
@9421samuel 9 ай бұрын
This little thing with coping foot will be absolutely brilliant
@caramelypoops
@caramelypoops 9 ай бұрын
thats exactly what I was thinking
@aaronoconnor606
@aaronoconnor606 9 ай бұрын
That's how I use mine
@nickp3270
@nickp3270 9 ай бұрын
this is the exact reason ive been thinking about getting this one
@patbird9694
@patbird9694 9 ай бұрын
Thank you to who ever invented the T shank blade. Hated using the jigsaw with the u shank. Was such a pain .
@evildead1791
@evildead1791 8 ай бұрын
I'm pretty sure it was bosch just fyi
@morganwheeler7417
@morganwheeler7417 9 ай бұрын
I'm a Makita guy but do M12 for some stuff, I've been using this jigsaw for a few months and it's perfect. The 5.0 batteries are game changers! Tons more power and less cut-outs. The dust chute is hilarious and I would love to find out what the engineers were thinking. the standard Collins coping foot fits well.
@rjt135
@rjt135 9 ай бұрын
Should take a look at the M12 Brad Nailer when that comes out. They're building out a pretty compelling lineup for trim work.
@jonathangaliano2617
@jonathangaliano2617 9 ай бұрын
If it ever comes out haha. I've been waiting but at the same time debating because it only shoots up to 1 1/2".
@yellowmarsh123
@yellowmarsh123 9 ай бұрын
Hey mate, I'd love to see you have a look at the Makita DJV185Z compact 18v jigsaw if you get a chance, it's seems to of flown under the radar and no one's really given it a review. Great video as always 👍
@BuddhaRhino
@BuddhaRhino 9 ай бұрын
Definitely M12 for me. I have makita gear but the m12 lineup is so impressive, I had to buy some. You can't really beat using lightweight tools when you can. Only m18 i have is the angle bradder, again, a great tool.
@trashes_to_treasures
@trashes_to_treasures 15 күн бұрын
20:19 love it 😅 who remembers this? Wonderful little tool! A must if you’re in the M12 platform!
@toolscientist
@toolscientist 9 ай бұрын
24:16 glad to see the safety jandals back in use
@AlexKall
@AlexKall 9 ай бұрын
I think this is the first video where I've seen you make a positive comment about ergonomics towards a Milwaukee tool. Then again, I've not seen all videos. But that speaks volume about how much they improved that on this one.
@Muscon01
@Muscon01 9 ай бұрын
Particularly the M12 tools since they usually compromise the handle ergo for the battery.
@silkroadpl7155
@silkroadpl7155 9 ай бұрын
It seems, that Techtronics TTI decided to kill Aeg 12v pro line, to adapt her great features for Milwaukee, which is their premium brand... what a pity for european users of that platform... it apllies as well to american ridgig 12v
@scottshepherd4137
@scottshepherd4137 8 ай бұрын
Love the M12 platform…… great range, good power, more compact 👍👍
@j.p9655
@j.p9655 Ай бұрын
I've run Milwaukee corded tools for a long time. I just recently got into the m12 line and I absolutely love them. I think this jig saw will be the next one I purchased. Thanks for the video.
@mikemorgan5015
@mikemorgan5015 14 сағат бұрын
I have both M18 and M12 tools. I've found that I will reach for the M12 tools first almost always. Sometimes, I need the power the M18 stuff provides, but not very often. I can pack WAY more tools in much smaller bag or box with the M12 stuff. The flange for the M18 slide on batteries eats up a lot of space and the tools just can't get as close together in storage. I know a lot of people don't like the grips on M12 tools, but they fit my hands perfectly. Now stuff like circ saws, the M12 is not the way to go if you are making a lot of cuts in lumber. But if you just need to make a few cuts, it's worth the extra cut time to not have to carry the bigger tools and bigger batteries. As for this jigsaw, it's the best one I've ever used. Plenty of power, excellent features, The vacuum attachment is a joke, though, in my opinion. It works, but it really needs a swivel joint where it joins the tool, IMO. It's not sucking big chunks, so I don't see that it would degrade the dust collection.
@cortezaz
@cortezaz 8 ай бұрын
Brilliant blade pop out feature. I don’t have to touch a hot worn out blade when I have to change it in the middle of a cut.
@caramelypoops
@caramelypoops 9 ай бұрын
I've got a D grip Makita and i use it upside down for coping skirting, It's a bit awkward (base board for the yanks) I think this could be my next jigsaw.
@alvinbk92
@alvinbk92 9 ай бұрын
I was waiting for a sale on the makita barrel grip and it got even more expensive. Had the m12 a few months and its been great.
@NonieTools
@NonieTools 8 ай бұрын
I just got mine a few days ago. Can't believe how small the thing is! Great tool all around, but I just know I'm gonna break/lose the dust cover/zero clearance insert!
@wearsjorge55
@wearsjorge55 9 ай бұрын
The base adjustment on the brushed version is rubbish, comes loose on its own while the tool is on. The allen key isnt the most convenient method but at least its a sold fixing that wont slip
@daifeichu
@daifeichu 9 ай бұрын
I got a brushless Makita D-handle a few months ago. I had been using a Bosch barrel grip for years so when I got the Makita I wasn't use to loading the blades by just shoving it in. I've been missing out on that loading feature for years. I'm well into M12 and this new jigsaw looks sweet but just can't see myself getting it considering I just picked up the Makita. The only problem with the Makita is, they didn't pack it with the vac attachment and trying to find it here in Canada is like trying to find a unicorn.
@Jeff-rk8hq
@Jeff-rk8hq 9 ай бұрын
This saw IMO is debatably the best at least barrel grip jigsaw on the market if not the best of both barrel and d handle…and this bgrip would be especially good for use with a Collin’s coping foot on it, great review tools. I’d love to see you test that hikoki barrel grip and d handle jigs as the b grip, that one has never been released in N American market unfortunately. Oddly enough probably in part due to the disjointed nature, things being lost in translation, or possibly just lack of communication or idk but even the d handle 36v jigsaw was released only to be discontinued and then later re released on US market but the barrel grip never was so I’d love to see the Mhpt bgrip pushed to its limits, see how it compares to their d handle i.e. is it the same motor etc. just different body style or is it a completely different motor etc ya know, also seeing it compared to the competition would be great as honestly I don’t think I’ve seen a single video on KZbin, demonstrating while comparing it to other saws & that’d be really helpful to see how it stacks up against even this guy.
@timdt1792
@timdt1792 2 ай бұрын
Good review. I buy M12 as a homeowner DIY guy.
@slump8030
@slump8030 9 ай бұрын
great vid, definitely will buy
@ThisTall
@ThisTall 9 ай бұрын
I’m glad they upgraded it, but I can’t see a reason why they’d remove the base adjustment lever, for an Allen wrench.
@trashes_to_treasures
@trashes_to_treasures 15 күн бұрын
I guess most people don’t need to change the angle that often and an Allen key instead of a lever saves a lot of space, making the tool smaller? In my case, I rarely use the angle function on a jigsaw so that I’d be perfectly fine with using a key.
@FixthisCD
@FixthisCD 9 ай бұрын
Couldn't really see how well the blower worked. I have one now where I have to blow the chips away because the built-in isn't that strong
@iangregoryhome
@iangregoryhome 9 ай бұрын
Reminds me of the Bosch Professional 12v
@diegobiscazzi6696
@diegobiscazzi6696 8 ай бұрын
Great design, just let it down on the angle adjustment, using the allen key to ajust angles is a bit oldschool.
@riseld4
@riseld4 9 ай бұрын
How does it compare to the Bosch 12V Professional?
@hausbauconstruction2020
@hausbauconstruction2020 9 ай бұрын
Great review. only thing it's missing is a belt hook. M12 framing nailer?
@noskills9577
@noskills9577 9 ай бұрын
Are there any signs of an updated m12 circular saw?
@UKTOOLTALK
@UKTOOLTALK 9 ай бұрын
Ooooo looks like a good bit of kit!! Of course it needs converting to makita cxt and spraying teal but that’s standard for me 🤪, great review 🤟🤟
@MadLadsAnonymous
@MadLadsAnonymous 9 ай бұрын
It looks awesome! When does the Hikoko C3612DRA miter saw come out in your neck of the woods?
@nikgrekk2020
@nikgrekk2020 9 ай бұрын
Did you check new mafell 18v jigsaw😮
@ToolsAndStuffOFFICIAL
@ToolsAndStuffOFFICIAL 9 ай бұрын
Yeah, looking forward to trying that out.
@nikgrekk2020
@nikgrekk2020 9 ай бұрын
@@ToolsAndStuffOFFICIAL be first for 📷
@ToolsAndStuffOFFICIAL
@ToolsAndStuffOFFICIAL 9 ай бұрын
Fingers crossed 🤞
@TheMelbournelad
@TheMelbournelad 9 ай бұрын
Needs to hit up Gaston
@ozyrob1
@ozyrob1 9 ай бұрын
M12 is the best platform for speciality and compact tools.
@El_Savenok-mh7fq
@El_Savenok-mh7fq 8 ай бұрын
I absolutely love m12 lineup but drill-like tools handles are much more awkward to hold than makita's. It's a pity Makita don't have even a half of those tools in 12v line, so half of my tools are xgt and other half is a horde of red little monsters. Gen3 drivers are all beasts, combined with 2.5HO batteries I cant find a reason to use anything over them on 95% of work.
@17volcanic
@17volcanic 9 ай бұрын
Great channel, I'm in nz...can I buy off Amazon japan?, is gst an issue? Cheers
@ToolsAndStuffOFFICIAL
@ToolsAndStuffOFFICIAL 9 ай бұрын
I put Amazon Japan links in a lot of my videos for people like you. It's all good, I buy from there all the time. They add the GST at time of purchase.
@PerryB.-iq1eh
@PerryB.-iq1eh 6 ай бұрын
Can it beat a 6 years old Mafell P1-CC?
@aaronoconnor606
@aaronoconnor606 9 ай бұрын
This is my favorite jigsaw for copeing
@nickp3270
@nickp3270 9 ай бұрын
ive been stuck between getting this one or the flex 24v jigsaw(im in the USA) and i havent been able to decide lol i also have been looking at the makitas but they went from being made in the UK to china and idk if thats a great thing
@nickp3270
@nickp3270 9 ай бұрын
do you guys have flex 24v or do you know if you are going to get it their tools are pretty nice
@peterstevens6555
@peterstevens6555 9 ай бұрын
Kia Ora & Good Evening from aucks …great video bro …
@thatguythatdoesstuff5899
@thatguythatdoesstuff5899 9 ай бұрын
Milwaukee sending tools to Tools? Is THE Makita guy gonna get sponsored by Milwaukee?
@chrisvaiuso6010
@chrisvaiuso6010 9 ай бұрын
That weird NZ insect noise in the background made a nice soundtrack.
@reggiecoupe
@reggiecoupe 9 ай бұрын
I prefer my m12 tools, lighter and so much power.
@powderdescent
@powderdescent 9 ай бұрын
That angle adjustment requiring loosening and tightening the screw seems horrible.
@karansinghsarhjatt9132
@karansinghsarhjatt9132 9 ай бұрын
Hlo sir I am Indian my Question is what is powerful Makita xgt TW001g vs Milwaukee new gen 3 2967-20
@64nine
@64nine 8 ай бұрын
M12 👌
@riba2233
@riba2233 9 ай бұрын
doesn't look bad at all :)
@reg171reg
@reg171reg 8 ай бұрын
I use my M12 for 95% of my work. Only some seriously heavy duty jobs make me get out my M18.
@digaum
@digaum 4 ай бұрын
Slow mode is for cutting metal, mate. You're welcome.
@ToolsAndStuffOFFICIAL
@ToolsAndStuffOFFICIAL 4 ай бұрын
Life tip: If you are going to leave a comment on a KZbin video, make sure you watch it first to avoid looking foolish. You're welcome.
@jonathangaliano2617
@jonathangaliano2617 9 ай бұрын
What's the point of the orbital options if they leave a rougher cut?
@agoogleuser1594
@agoogleuser1594 3 ай бұрын
Speed
@Rando88_
@Rando88_ 8 ай бұрын
Yes…yes it is
@abhishekbhardwaj8624
@abhishekbhardwaj8624 6 күн бұрын
@gelavski
@gelavski 2 ай бұрын
Гарний огляд, гарний інструмент! Дякую!
@luisjaras3606
@luisjaras3606 3 ай бұрын
I don’t like the on/off button
@thorpettis4195
@thorpettis4195 9 ай бұрын
Working in flip flops is absolutely insane but to each their own.
@davidhouse5920
@davidhouse5920 9 ай бұрын
It’ll last 2 years then enter the Milwaukee graveyard
Milwaukee M12 Fuel Installation Driver - The Good and Bad after 2 years of use.
19:06
Transform Your Toolkit with Milwaukee's M12 Barrel Grip Jigsaw!
10:50
markthomasbuilder
Рет қаралды 10 М.
The evil clown plays a prank on the angel
00:39
超人夫妇
Рет қаралды 45 МЛН
Beat Ronaldo, Win $1,000,000
22:45
MrBeast
Рет қаралды 144 МЛН
Creative Justice at the Checkout: Bananas and Eggs Showdown #shorts
00:18
Fabiosa Best Lifehacks
Рет қаралды 35 МЛН
Does Your Jigsaw Do This? || Festool Carvex Jigsaw Deep Dive !
11:17
Milwaukee's Best Jig Saw - M12 Fuel Jig Saw
13:38
Tinker With Tools
Рет қаралды 18 М.
7 TERRIBLE Tools You Should Never Buy
18:45
American Electrician
Рет қаралды 391 М.
Milwaukee Tools You Probably Never Seen Before
27:10
Top Tech Tools
Рет қаралды 505 М.
One of These Is GARBAGE: Milwaukee M12 Jigsaw(s) Review
8:35
Spotted Tongue Woodworking
Рет қаралды 10 М.
SaveTik co 7445518087849315636 hd
0:12
Bong Hor Nitean
Рет қаралды 38 МЛН
#duet #fyp
1:43
Afdhkv gh Atudkg
Рет қаралды 2 МЛН
Riding memories with mom 🚴‍♂️💖 Unbreakable bond, unbeatable journey
1:14
The Doctorpreneur Academy
Рет қаралды 21 МЛН
🤣 мама собирает в школу 🤣
1:12
Влад Закроев
Рет қаралды 2,8 МЛН
Жену Криштиану напугал качек 🤯
0:35
КИК Шорт!
Рет қаралды 479 М.