Clunking Popping Knocking Noise While Turning

[@Calvin7007]

Nothing Beats An Honest Mechanic 🙏🏽

[@biancatoscano2171]

Trying to find one is hard

[@JamesMoore-un3cu]

Having tinkered with cars my whole life, I can truly appreciate the mind of someone like this, who goes for the easy fix, instead of spinning his wheels for hours on other issues. I sometimes let my mind run away with me and imagine all kinds of problems that are not really there. Bravo to this gentleman!

[@peterinnewyork3931]

Thank you Peter for being an honest mechanic I'd say 80% of all mechanics are trying to make more more money the popping sound was to get you to replace more parts then they was honestly tighten the bolts then do your back brakes or buy your van no money to make more

[@LAactor]

True it's this way a lot now. I had a tire guy everyone knows but he tried to say in disgust my v6 wasted so much gas. I laughed in his face and said just for that I'll charge him a thousand over market value because he just wanted to use and abuse it and then flip it for profit. Pretty disgusting.

[@geofffikar3417]

You made someone very happy!

[@jamesu]

Great job. sounds like James is happy!

[@nyceguy7543]

Inspection, inspection, inspection. Here is an interesting experience to buttress this: I had a rotational left rear noise on my Highlander that waxed and waned with speed. My mechanic diagnosed it as coming from the rear differential. Replacing the differential did not stop the noise. I took the car to an elderly retired mechanic friend on my street who does minor repairs at home. He listened to the noise as I drove past where he was standing. Next, he threw a mat under the car and in less than 3 minutes, he came out with a picture of the problem on his phone. It happened that the emergency brake cable came loose and was rubbing on the lead weight used in wheel balancing that was placed on the inside of the rim. Thinking back, I remembered I had complained that my emergency brake was not working. My mechanic fiddled with the cable, but said it was a job for another day. He must have forgotten to properly put the cable back in place. It appears that older mechanics are more thorough and more methodical than the younger ones.

[@Esteban_Herrera]

Great job again Peter! @3:48 That miss alignment of the motor mount bolt bugs me LoL I would have loosened the nuts, maybe lifted the motor to see if it may pop back in it's old resting place. James has found a great mechanic.

[@johndesaavedra1040]

This reminds me of a 1994 Grand Voyager LE I bought used many years ago. It did not stop well and it make a clunking noise when turning lock to lock. It had a lifetime set of dealer service records. A brake job had been performed and the rack was recently replaced. All four steering rack bolts were loose and the brakes were for a base Caravan. I torqued the rack bolts and replaced the brakes with the proper pads and rotors and had a great vehicle for several years. Dealer service does not guarantee correct or competent service.

[@billsimpson604]

He is a determined fellow to change a transmission without a lift.

[@markkrispin6944]

Great work Peter!

[@jbro0917]

All I hear is your jacket swooshing

[@dc5723]

Duralast is Auto Zone's house brand. Great video!

[@garethparry6673]

I watched this video then looked under my Renault Clio that was making the same noise. Two boots were slack, so I’ve tightened them and so far the noise has gone 🙏 thanks

[@LAactor]

Hope you are able to sleep in this rain Tuesday morning and day. Rain has not begun here yet as I'm at the southern tip of the storm. Stay dry! Warm coffee and tea for you. Always keep the hands and neck covered to stay warm.

[@Mityob67]

Undercarriage sounds that translate into the cabin usually sound bad, so it can be easy to think the worst.

[@paulodisano502]

Once again, great job my friend. Cheers 🇨🇦🇺🇸

[@mrscorpio2674]

Great great job Doctor Petter Of Toyota medical lol. Take care from Canada

[@josemedina1861]

Where are you located I need help with my truck

[@T.K.9]

Got a 2009 Ford Focus Manual in the UK, and I am having the same clunk or metallic bang when I turn the wheel like 4 hrs ago. But when I just go straight, it don't make the sound. It morphed from just a squeaky suspension sound when I hit bumps or potholes to a full blown clink and clank. When turning the wheel and rolling slow.

[@LAactor]

I've seen trans replacement on your back. I don't understand what you said it was extra. You mean the cost of a lift is extra or to use the lift is extra? I know there are some DIY shops that charge extra to use the lift otherwise you have floor jacks.

[@metop33]

Thank you for the video! I have a 2007 Toyota sienna that makes squeaks and creeks when I’m turning the wheel left or right at slow speeds. I put brand new struts and stabilizer links on it. Hoping that was going to fix but it still squeaks and creeks plenty especially in cold weather. I tried to spray all the bushings and rubber components with lubricant but nothing has really fixed it. Any suggestions?

[@alexandercahoulan6583]

that sounds like ball joints. My lower ball joint was bad and it made that same creaky noise when turning at slow speeds. It sounded like an old door creaking. But check lower, upper and tie rod ball joints.

[@frankponte4031]

Check your lower control arm bushings. They have a tendency to crack causing a squeak or a creak. Recently changed them out on my '08 Sienna ~ 190,000 mi

[@djalbert90]

@metop33 I changed brakes my Toyota camry 2016xse. It started grinding, humming, rubbing weird noise, I have been taken to mechanic more than 4 times. He put new brakes again and still the problem was there. Last time they changed the brakes and everything got set down, after 1 week it again started and still doing and mechanic doesn't know and no idea what kind of noise is it? How you can help me? Your reply will be greatly appreciated it.

[@jaybreezey6945]

We’re is ur shop at. I’m Having some what same noise but I thougt it would b upset strut mount. Towards the end of the turn on steering Weel

[@loveydovey4u]

Sucks that the transmission went out! Change the oil folks!

[@2reelyakrz481]

Great that it was so simple!!!

[@ishaqmd.9026]

Well done.

[@JohnUSA-u7g]

2010 toyota sienna making clicking noise when turning in the dashboard ,and only when you turn Cv axle new struts new .

[@shellybelle6781]

What about booming when turning?

[@davidspare6131]

I couldn’t find a solution or even a reason for a problem on KZbin, I drive an 05 Magna and when I turn a right corner, there’s a VERY obvious singular clunk/thud coming from what seems to be my front right wheel It’s not a metal sound, more like a rubber/plastic sound? I’ve checked and it’s not my wheel bearings or my actual wheel, would you know what it is?

[@LeMerch]

I have this exact same problem now on mt Hyundai i30. NO clue what it is and have been searching youtube for days!

[@davidspare6131]

@@LeMerch I hate too break it too you but I got it solved, it was the spyder gears in my transmission

[@masonjones8258]

what were the torque specs for those big subframe bolts?

[@ESnipetheartist]

Great job!

[@psmevents]

I have a similar sound and first thought it was the Struts (70K miles). hard to replicate sound on demand. seems to make when going over potholes, speed bumps but also just when tight turning. hope it's not the mounts.

[@inspectorjavert5563]

what did it end up being?

[@psmevents]

@@inspectorjavert5563 The shop heard the sound but didn't want to commit to a expensive "replace and see" method. They said all the steering linkage and tie rods appeared in spec / normal. It might be the struts but they weren't leaking and they mechanics couldn't replicate the sound in the shop. Went to 2 separate repair facilities. To me- it may be worth it to take it to dealership for their 2 cents.

[@adisolomon007]

I have a 2011 toyota camry which gives a clunking sound on the first acceleration for the first 2 gears after a cold/warm startup. I'm confused about whether it's the CV axles or the transmission is failing. Can someone share their thoughts?

[@LAactor]

Duralast is AutoZone but overpriced because you can pad slap and bring back the plate and as long as there is material, they will exchange with new. The Gold will stop you on a dime.

[@fernesal]

Mine does that. Pulling my hair. I will retighten those. Thanks

[@AI_arab_world_maroc]

These nuts 😂😂😂😂😂😂

[@Evokvn]

First

[@ApowerRO]

@4:00 these nuts too