How to Replace Power Steering Pump Pulley 2003-2007 Honda Accord (V6 3.0L)

Shop for New Auto Parts at 1AAuto.com trq.video/c-148-s
This video shows you how to install a new power steering pump pulley from TRQ on your 2003-2007 Honda Accord (V6 3.0L).
This repair was done on a 2006 Honda Accord EX 3.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord
Tools you will need:
• Flat Blade Screwdriver trq.video/obMG...
• 15mm Wrench trq.video/oaif...
• 12mm Socket trq.video/ocik...
• 19mm Socket
• Ratchet trq.video/ocix...
• Socket Extensions trq.video/ocik...
• Torque Wrench trq.video/obkW...
• Gloves trq.video/oboC...
• Power Steering Fluid
• Safety Glasses
• Jack Stands trq.video/oarx...
• Pole Jack
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Honda Accord 2003-2007 7th Gen: • Honda Accord 2003-2007...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money