Ford Escape Stalling Issue Fixed!

This Ford Escape would frequently stall when you were driving slow in a parking lot. It also had a rough idle when it would stay running. The canister purge valve was the culprit.
Amazon links:
Canister purge valve: amzn.to/46l3JhH
Hub Buster: amzn.to/3sXGBU5
My test light: amzn.to/2VCYpak
My scan tool: amzn.to/3JCxrD2
My little scan tool: amzn.to/3H2bWtt
TPMS scan tool: amzn.to/35aYLJN
Tire Machines: amzn.to/2R4mYu6
Torx Socket Set: amzn.to/3By4pSa
Torque Wrench: amzn.to/3scOMg9
Bench Vice: amzn.to/3sTtDXf
Plastic trim tool set: amzn.to/3v3Xy1t
LED magnetic light: amzn.to/3p1q00t
MUST HAVE for coolant work https: amzn.to/3oYinI8

[@ny.walker8992]

Thanks for posting this video.. I have a ford fusion....But it seems to be stalling on me just the same.. Great info and the audio was great also

[@onlycartoons2012]

Changing this valve solved the problems I had with a 2012 Escape XLT. Ford dealer couldn't figure it out! I wasted time and $ with them. The valve cost about $40 at O'Rielys. I could have purchased it for half that off Amazon, but I needed a quick fix. Thanks for posting the video!

[@jobfernandez78]

Thanks for the video. Going to buy the part today and replace it. Hopefully that fixes the issue on my 2012 ford escape.

[@dboy124]

Tom you the Goat 🐐 thank you my check engine light went right off my boy

[@Tomsfoolery.]

Good to hear! Thanks!

[@blayzehenson5384]

I have this same issue with my 2010 Ford Escape. Thank you!

[@calholli]

I probably would have started the car and double checked the new purge valve for a leak before putting the hose on. Just for continuity of the video and show a "before and after" shot of it leaking, and not leaking.. This one can be tricky for people who don't already know to look for it, because the codes don't really tell you that this is even possible to be an issue; they should have added another trouble code to monitor this thing, oh well: job security. :)

[@motivationiskey4993]

Ok so how did you confirm it was a vacuum leak and the purge valve ? I seen u put the gauge on it and say it was leaking but why do u say that? It’s supposed to pull air half the time when it’s warmed up .. I’m very confused on how you made this diagnosis?

[@kar2nist1979]

Is this the same for the 3.0 v6?

[@josecarcamo9432]

Hey tom thank you for your useful imformation .

[@davidboerst4789]

Had an escape where if it ran for a bit and you turned it off to like go in a store, it would stall when it starts back up. Going to try this and if that doesn't work, ive also read that the fuel pump mega fuse can be the issue too

[@bigpickle6815]

Did it work?

[@dalebabbitt6185]

Good video, thanks for the lesson.

[@Tomsfoolery.]

Glad you liked it!

[@jonmadden9305]

Mine doing similar but I’ve replaced that valve and bunch other stuff. My LONGFT1 is running 25.0%. Could that mean fuel pump is failing? It’s also having long time first start in morning.

[@petergarofolo9385]

Another good video 👍 👍 👍

[@chriscline5716]

How can I tell if it’s a throttle buddy problem

[@pjstpierre2340]

Great Vid, thanks!

[@claudiofagundes9502]

I appreciate this video thank you

[@LeonardoLopez-zt7js]

Thanks for the help

[@graysonsjourney5420]

My mercury mariner is doing the same thing but I have no check engine lights or codes.

[@Bailey-in-austin]

What’s the gel you put on before plugging the hose?

[@Tomsfoolery.]

Petroleum Jelly

[@Bailey-in-austin]

Thank you for such an informative video! I have a 2010 ford escape, the car starts OK, but the engine seems choking when idling and died couple of times when idling and when hard breaking. I suspect it is purge valve issue and plan to replace myself. What else should I pay attention to? Thank you so much for your video! Help me a lot! BTW, I am not a machinist, just try to DIY to save couple of bucks.

[@jamesbolt7090]

Thank you!

[@bradleybaugh2653]

I usually torque my bolts a quarter turn past “that’s probably too much”

[@ChristopherReyes-p4m]

I don't see this exact part anywhere

[@tobydyes]

should have kept it like that you sound like Darth Vader with a cold

[@TroyR-gh9nt]

I'm a pro with audio and video. Just come on by.

[@billland9936]

SNUG torque spec.