Tuning and how to Disassemble Benjamin Marauder Air Rifle

Use this video in conjunction with Crossman part diagram.

[@flatsixrsr]

Great video, without having seen it I wouldn't have had the courage to dismantle it to replace the valve stem. Thank you and I congratulate you. Luca from Italy

[@crypto_creep8222]

Crossman should send a copy of your video with everyone of there marauders no joke. This is a huge help thank you.

[@esgush]

Thanks for the great informational video. Video was clear and detailed. I can appreciate that you didn't use any annoying background music or any long intro.

[@grounddove]

This was a very good instructional video because it had caption and part numbers listed. Now it is still a good video but nowhere as good as when it was first posted.

[@terencesilverton4474]

Many thanks for uploading this video will help me dismantle my new marauder .25 so as to install a regulator hopefully to give more shots per fill there are not many new marauders here in the UK very helpful

[@alinm3634]

Thank you so much for posting this video. It is the best one I've seen on the Marauder, although you make it look much easier than it is.

[@RABI3105]

Thank you very much. It is a simple, useful and easy explanation❤

[@Coutinhoallen1]

A very big thank you for your wonderful information to which it can help me in the near future. fantastic information and thanks once again.

[@PistolsAndPistons]

Dude! AWESOME! Thanks for making this!!

[@chriswakefield2446]

Nice video, thanks. Not sure why no audio, but that would be a nice addition, even if it is just the working and handling sounds. I guess you would have to overdub due to the speed-ups which adds overall work to the project.

[@gr8maker46]

Great video! Thanks!

[@leftymadrid]

Fantastic job here! Many will appreciate!!!!!

[@tomlodge1256]

Thought it very helpful... thank you!

[@SteveK1953]

great video, thanks fir your time. SteveK

[@ifortesidaja8421]

You're awesome man

[@1keloso1]

Nice job!!

[@chrimay]

At 13'26" beautiful dog!

[@tdog1319]

Thank You -Great job - I was hoping to see how you lubed the "Breech O-ring"

[@mqa1963]

Good vid ! Thanks !

[@bagussonnytjandra178]

very helpfull thanks you mate

[@Mr2007math]

Nice job

[@toddzautner4330]

very nice I learned a lot..

[@tracker1955]

I wish you would have shown how to go about replacing the breach o-rings as these have to get a lot of wear if you shoot a lot. Would love to see how you remove and re-install them. Good video on all other points. Hope you actually look at comments left.

[@8140100]

To remove the breach oring, get a small pick and pull it out. To replace the oring get a wooden dowel rod and insert it in the muzzle. Push it down until it is just above where the groove for the oring is. Lube the oring with some silicon grease and insert it in the breach. The dowel rod will keep the oring from folding over or sliding down too far. Take the pick and push it directly over the groove and it will naturally snap into the groove. If you try it without the dowel rod, it will drive you crazy with the oring folding over on itself or going past the groove.

[@Slug_Slinger_Airguns]

The stock trigger only allows you to get to 2.5 lb trigger pull but you can remove the spring and adjust it down to just ounces.

[@isederalvarado9817]

nice job..

[@darrylwilliams5632]

awesome

[@EvaMahan]

watched your video and gave me the courage to tackle my .22 Mrod. Watching you made it seem simple and made my break down easier. Thanks! I saw in the video that your hammer adj. screw was way back, mine was much further out (factory setting) and it looks like the valve assym. is made of brass. The fill port, gauge port, and valve are alum. on my gun. Have you gotten different parts? Will let you know how the rebuild goes...started this because of air leaking out of the gun, pressure would drop from 3000 to 0 in 5 or 6 days. Enjoyed watching, however there seemed to be no voice or any sound at all, is that correct?

[@RobZfisherman]

Great video, just what I was looking for! What does the lawyer spring mod achieve/eliminate? Thanks again!

[@RobZfisherman]

Thanks, just did the mods, trigger now at a pound :) Hill pump is on a truck, should be shootin' this weekend!

[@edwardvanbruntjr6649]

I am retired Air Force instructor. Extremely well done. Text was appropriate to the task being done and it will be my Go To for the Marauder. One question. What lubrication do you use on the seals?

[@callofdutyguy9]

Edward Van Brunt Jr use only 100% silicon grease.

[@azeezkammadam]

FANTASTIC BUT WE DON'T HAVE.

[@lrmathena09]

Excellent video, Would this be the same for the Marauder Wood Walker.

[@aphexteknol]

Are you using a blanket from an offset printing press as your work surface? It sure looks like the backside of one, with the rubber side face down.

[@dmc31405]

Nice video. How long had this rifle been in service? The internals in the air tube look great. Your filling methods must be well filtered.

[@oneil6599]

A little sound would help out. There’s a lot going on here and just a little explanation would make this a lot easier to comprehend.

[@Skaetdude]

The 2 breech mounting screws #37 what do they screw into? I have a BnM breech and was thinking something the same.

[@azizrahim8007]

Lucky you! You can go out and hunting with Air soft gun. Look at my country , we can buy an airguns (chines) but we can not go out and have fun. If the police find it , they took it from you or you have to pay over 50 $ for it . If you say ,it is only air gun, they will be more mad like crazy dog , they will get you air gun and all the money you have . If can not pay they keep you in police station til somebody bring then 100$. I wish one day we can also be free and hunt like you do! I am living more then 9 years in safe house, and can not go out, because of my past life . I was in military and to get kill its very easy.Please help me Gad.I am really get sick mentally! Love.Aziz

[@senatorjosephmccarthy2720]

Aziz Rahim + May it be the one you call Gad, hear you. His Name is Yahweh. May you be Greatly blessed by the Most High, He leading you to good things. The reason the governments are outlawing the guns is because there are thee organizations in the process of conquering the entire world. Get and slowly read and .believe. a King James Bible, what IT says. The end days are now.

[@grounddove]

Thanks, great video. How do you go about polishing the hammer and guage port?

[@rdh2059]

Most home tinkerers have a Dremel tool around, which has felt polishing wheels....

[@christian-buccat]

❤👏👏👏👏👏👏👏👏👏👏

[@castronly87]

Hey nice and detailed disassembly video, did your rifle come with chrome bolt or did you Polish it? I wanna know so would probably do that on mine, looks Good...

[@Slug_Slinger_Airguns]

Thank you appreciate the feed back the bolt comes blued. I polished the bolt and hammer as smooth as I could and lubed with Molly. Made the cocking feel much smoother just make sure to locktite the cocking lug it likes to back out on its own.

[@HeshamALAhdal]

may you guys tell me what is the energy of this gun in 22 cal? and how many consistent shots you get?

[@ThuyTran-jr4qs]

hi i plan on disassembling my marauder to clean it should i replace all the o rings before i reassemble?

[@desmondspamer5097]

Do you perhaps have the specs for the orings of the 25 cal gene please?

[@uhuugyvenk9441]

Get it. Now.

[@denisc.decamposcampos2211]

Your video is to be congratulated, removed all my doubts. what is the function of the hoses you cut in the middle?

[@pinoydad_0811]

Was wondering my self

[@MrPeterschmit]

The 2 hoses act as a depinger.

[@mandh14]

What's this the Marcel Marceau version?

[@josearnaldopinheirodossant7712]

Please my friend, depingers could be also distancers ?

[@TomTom-fr9jd]

Can u upload about Benjamin fortitude

[@nagamanunagamanu-wn2vq]

Sir my BENJAMIN MARUDER Filled nipple gas leaked I didn't used this PCP for about 3year today I tried to pump but it started leaking air through it...... please help how to fixed

[@yullex3338]

prejudice I disassemble my benjamin, but in the assembly there 'leaking air !!! could you help me pls .... thanks

[@dtacmed]

Is this a Gen 1 or 2 ?

[@milburndmello4443]

why no sound in this video

[@tranduyet5622]

giá khẩu này bao nhiêu vậy anh?

[@vuduongthiet9626]

Hi. I live in Vietnam. I want to buy a gun. he can not move about Vietnam.

[@ammepcp5601]

Sub...

[@chrimay]

At 13'26" beautiful dog!

[@azeezkammadam]

FANTASTIC BUT WE DON'T HAVE.