Undervolt your RTX 2070 Super for more FPS! - Tutorial

[@MatthiasHeintz]

Best Curve Editor Tutorial so far, thank you!

[@ImWateringPSUs]

Glad I could help my man, consider subscribing to support the channel :)

[@Toni-PAT]

You are a genius thank you very much. I just followed all your steps and brought my GPU Temperature down from 82-83 degrees to 70-72 degrees, Until now everything runs stable. With a new fan curve i brought it even down to 69-70 degrees. Under full load of course

[@ImWateringPSUs]

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps me a lot!

[@NinTheLost]

what is your fan curve? same as the video?

[@Toni-PAT]

@@NinTheLost yes exactly the same like he did in the video

[@NinTheLost]

@@Toni-PAT thanks, good to know :)

[@sakamichisubs46]

It works perfectly, I have between 10-14c less and about 50w less power consumption, maintaining the same FPS as always, tested on Black Myth Wukong with 2070s, thanks.

[@ocelotkillalot4632]

BRO! I wish you all the best I struggled with this card for years now. Thank god I found this video. Bless you brother I wish you all the best. Bless your family, greetings from Germany

[@ImWateringPSUs]

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) Very kind words and I wish you and your family all the best as well!

[@MissionFunPossible]

Fabulous tutorial - thank you so much for breaking it down!

[@ImWateringPSUs]

My man! Glad I could help, consider dropping a sub to support the channel :) Also I do have tutorials for GPUs too

[@ThunderboltPath]

This tutorial saved me from crashes. I had a 2000 series RTX card for a few years now and didn’t know why sometimes the screen froze when I was watching KZbin or it blacked out with max fan speed in the middle of workloads. It turns out the default settings won’t limit core clock and the fans kicked in too late, so temperature was too high the motherboard needed to shutdown to protect hardware components. Thank you for making this short and effective tutorial!

[@cliftonmurphy84]

Only seeing this now, your a legend I was getting lots of lag but with this it has completely gone, thankyou

[@slejer_]

BEST LIVING MAN EVER!!! temps went down from 72c to 62c, power usage from 209w to 151w !!!!!!!

[@ImWateringPSUs]

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps me a lot!

[@KrisLaybourns]

I wanted to say thank you I was having terrible trouble with my card. This has worked, very well actually for me. Take the sub mate.

[@ImWateringPSUs]

Thanks a LOT! :)

[@jercastillo2581]

This worked like a charm for me. Idle temp is now 27 degrees celsius hotspot at 44 degrees celsius. 50 to 65 degrees when gaming. Performance, phenomenal.

[@ImWateringPSUs]

I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!

[@jercastillo2581]

already subscribed bro

[@lionz0r]

No fussing around, straight to the point. You are a legend.

[@ashryver3605]

Im happy with my 2070super, i repasted it and also replaced the thermal pads. I can do 1.043v @ 2055mhz, or .993v @ 1995mhz. Versus stock which would sit around 1905-1950 @ up to 1.065v. I dont believe i can go lower, but i might try again at .987 target instead. Had +1000 on the memory also, though no discernable difference between 900 or 1000 tbh. After changing pads, i could go up to +1200mhz and 1.1->1.2 was giving +1 Fps in 3dmark so there was still performance now. Ive lowered it to 1.1k as temps creep up to pump out though to avoid problems. Basically +200-250 max mhz on memory tho after repadding! For any stability tests this is what has 1000% worked for me -> pass two runs of 3dmark time spy with no crashes or artifacting. No guarantee if stable yet. Go into Fortnite, and play some taxing Custom Games. If you crash in Fortnite, its not stable. If you dont, its stable in everything else.

[@ImWateringPSUs]

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :) I’ve got other tutorials on the channel and more coming, if you like the content consider subscribing as it REALLY helps me a lot!

[@zaintayyab3025]

What were your Hotspot Temps before and after?

[@ashryver3605]

@@ImWateringPSUs sorry for such a late reply - i did just subscribe then, I genuinely didn't realize I wasn't already :O I thought I hit subscribe when watching the undervolt 13900k video from a while ago. Either way, still watching your content, keep it up! Its very to the point as well which is so good

[@MRRJ6549]

What pads did you use king?

[@dylanlange1401]

Recently upgraded to a Zotac 2070 super and was having awful frame dips and stutteting. Before using this guide i scored a 4660 in Heaven with 185fps and 9.5/min and after using these steps I got a 4948 with 196fps and 50.3/min. Thank you so much! Another tip I ran across that squeezed a few more FPS out of this card was disabling the HDMI audio driver of the card via Device Manager. I use my mobo's sound port so it was just eating 4~6FPS per game.

[@ImWateringPSUs]

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps the channel!

[@dylanlange1401]

@@ImWateringPSUs I subscribed as soon as this helped me out! I did have one quick question though.. After following this to a T after rebooting MSI shows 656mv and the curve for 900 is up to 1905.. Is this normal? Sorry for the question, still pretty new to all this stuff. Also do you have a discord server yet for people to join? Thanks again!

[@dylanlange1401]

@@ImWateringPSUs Nevermind I'm a dingus. I didn't have it under load when it was showing 656mv. I'm still curious about the curve changing to 1905?

[@pricelessppp]

Went with MSI been having a decent fps.

[@seanmarsella3071]

Well done sir, I went from 79-80 degrees in Path of exile to around 70 degrees. This was on a EVGA 2070 super black.

[@ImWateringPSUs]

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps the channel!

[@duliuscro764]

came here because of poe lol

[@radmed979]

Actually, great information, great video... Thank you, doesn't matter how good you are. How many years you've worked on pc, there's always something to learn..

[@abcdef-vg1xq]

Works perfectly! Thanks 😊

[@ImWateringPSUs]

I’m glad it was helpful! :)

[@niekonzn]

respect for video without ads and no advertising shitty software like others. just what we need.

[@dejanmatejic6396]

Works great for Gigabyte RTX 2070 Super OC, temperature drop by 10 degrees. The card works much quieter now. Thank you

[@ImWateringPSUs]

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps the channel!

[@dejanmatejic6396]

Subscribed🙂@@ImWateringPSUs

[@gompsie]

Great video, iam still on the msi rtx 2070 gaming Z that gpu used to boost to 1920 mhz out of the box but over the years the mhz has dropped it gets way to hot 83c full load,after watching this video i got it set to 0.900v with 1900mhz i left the power and temp limit at standerd made a fan curve for gpu and now its under the 75c and it boosts to 1845mhz,i will repaste this gpu soon its almost 6 years old now....... mille grazie

[@KSSGHD]

My card has been crashing constantly (I'm pretty sure it's my GPU) and found a solution was undervolt/underclocking to try stop the Kernel141 crashes. Hopefully it works because I had the same kind of crash when I was doing the heaven benchmark part of this tutorial haha

[@ImWateringPSUs]

Let’s hope it solves it. I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!

[@Windder]

Dude thank you. GPU was hitting mid 60s dB but after making the changes, low 50s dB + lower temps. For fps increase I couldn't test, I always lock at 142hz but I don't see any decrease in performance.

[@d3ad2076]

Thanks for getting to the point very appreciated

[@NinTheLost]

It hardly brought my gpu temps down, but I was able to lower power consumption and increase fps by about 15-20% on my RTX 2070. I achieved 0.850v at 1830 mhz with a +800 mhz overclock to memory, and it is stable 🔥

[@ciphervenom]

i don't know why but the fan section and voltage section isn't accessible on my afterburner pls help me through ...im also on a 2070rtx dell g7... very urgent

[@ImWateringPSUs]

Go into settings and unlock voltage monitoring and voltage control!

[@Alvis134]

Worked really well, thanks

[@gonzomuppet5793]

Danke!

[@ImWateringPSUs]

You’re way too kind, thanks a LOT for the donation. It helps the channel a lot and allows me to get more hardware for these videos. I wish you a very good day and happy gaming! :)

[@sergiofn3753]

3:29 do i need to put -300 on core clock before going full performance?

[@ImWateringPSUs]

Yes

[@SaadKhattabi]

brooooooo, my temps went from 75-80 under heavy load to 48 max 55! I did 1950mhz and 7200mhz on 925mv. Many thanks brother!

[@ImWateringPSUs]

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel!

[@sunnya.07]

Can you send me a picture on a social media or something please.

[@n.allstein]

Heya! Thanks for the tutorial! I tried doing your method, but sadly it keeps crashing all DirectX games (11000002). I have a Gigabyte 2070S OC Super White and I also tried lowering core clock by 200 and 100 (instead of 300) sadly didnt work... any ideas? maybe leave out the memory offset? i am kinda new to this so i dont know what memory offsets even do haha

[@floriangabriel5202]

The 900 mv and 1900 version is unstable for me, but undervolting @ 800 mv and 1700 mhz works fine for me...

[@chadi3295]

FIrst saw this video couple months ago and i applied it. Ive now factory reset my pc and had to come back instantly to apply these changes again. Best video so far!

[@ImWateringPSUs]

Ahahahaha this makes me really happy! Consider subscribing to the channel for more my man :)

[@chadi3295]

@@ImWateringPSUs ahhaha I had to, this is the third time im back for this video 😂

[@knallertk8062]

According to the graph, you dont set a constant voltage, but a constant frenquency. If it gets above 1900 MHz wil it not just increase the voltage to max?

[@ImWateringPSUs]

Nope, the X-ayis is stabilized so it’s a stable voltage

[@kwabenajoey]

well, this video helped me play warzone x ea24 without directx errors and crashing. it used to crush so much. Thanks man

[@Quinsterrr]

Which setting did you use?

[@kwabenajoey]

@@Quinsterrr i have the same GPU in the video above. I followed the same steps

[@ImWateringPSUs]

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel!

[@AlexanderMachiavelli]

my core clock, at the 700 mV point starts at just over 1600 mhz. How can i do this curve editor with a different graph?

[@drivinginswitzerland2628]

After applying the settings I noticed that the power usage in W is slightly higher and more "erratic" oscillating between 180 and 230 while before it would stay at a costant 175w(flat graph). Is this normal?

[@mArqSV]

when i undervolt it with the same settings my GPU core clock goes from 1950 to 1850 will this affect my performance?

[@MischaN54]

How much performance plus are the 300mhz mem clock? Thanks for Video!❤

[@ImWateringPSUs]

It depends on the game! On average 2-3%

[@nguyenthanhthien362]

so i just going to put core clock -300 memory +500, 975V at 2000 right sir?

[@ImWateringPSUs]

Yess! Also remember to subscribe if it works for you :)

[@akito4201]

thats basically an oc and uv right? asking for a friend

[@CuriousAlex111]

Going to try this out since my 2080 super is black screening while playing Baldurs Gate 3. Not a temp issue but it could be due to power spikes since I only have a 650 PSU.

[@ImWateringPSUs]

Do try it, it should help!

[@christiandk09]

I have a 2070 super and this is suddenly happening with (nearly) all my games is a 600w psu not enough? Idk this is a prebuilt and i think i might need a new PSU

[@harshit132]

Same, I thought my card is ageing. Worse on Vulcan while playing bg3

[@uncleroy]

@@christiandk09i have an evga 600w gold with gigabyte 2070 super and i5 10400f and it works

[@ELBONII]

​@@christiandk09I have a 2070 super, 550w 80+ bronze psu and is enough for all my games.

[@mArqSV]

why do we do -300 on the core clock? shouldnt we increase that? (sorry im a rookie at thiss)

[@simonepiontini]

I got an RTX 2070 (normal) on my PC right now! While trying to undervolting I’m noticing that the voltage isn’t stable at the 800 (or 900) limit that I’ve used. Is that normal while benchmarking? (Like the GPU asking for less power in some parts of the benchmark). Thanks for the guide btw ❤️

[@ImWateringPSUs]

Yes that’s very normal! I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!

[@simonepiontini]

@@ImWateringPSUs fatto! ❤️

[@getcarter4dynamo]

Thanks alot! Worked a treat and knocked off about 7 degrees celcius off the temp. Feels more stable and smooth ingame.

[@ImWateringPSUs]

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

[@bottomrider7]

Is undervolting necessary if temps are at 58C when gaming?

[@waelkarouad]

no

[@daweking]

Following this tutorial I opened Battlefield 1 as usual and right in the menu it crashed. I have MSI RTX 2070 Super and playing on 1440p.

[@ImWateringPSUs]

Try lowering the core clock by 100Mhz!

[@lennykarat]

I followed your instructions but voltage is not showing on MSI afterburner? Voltage control and voltage monitoring is checked, applied and saved. Heaven benchmark is running in the background on max settings. What am I doing wrong? Thank you!

[@Kdog307]

mine stock runs at 7000 mem and 2015 clock on gpu, at no higher than 65 at the max graphics settings, get more air in ur cases yall.

[@ImWateringPSUs]

Ahahahaha but some people have small cases or worst custom GPU models!

[@CallMeFearS]

does this setting help in FPS? or just for good Temps?

[@kvn890]

Great video! Btw, does this work for the Nvidia GeForce RTX 2060?

[@ImWateringPSUs]

It does but I do have a dedicated RTX 2060 Undervolting video

[@cncrcOG]

why did you downclock your core -300Mhz then adjust the voltage, seems like the same thing but in two steps ( I lower my core clock my volts drop) ended up hurting my score by about 5-6 fps but dropped 6c I must of done something wrong idk

[@ImWateringPSUs]

You need to do it exactly as in the tutorial! And subscribe to the channel for maximum fps

[@VrodegTheGoblin717]

My respect for Italians grew even more, thanks dude, I was constantly flat lining at 84C and my PC would crash, I'm doin' just fine now

[@ImWateringPSUs]

Glad it was helpful and you’re way too kind man ahahahah

[@oliversun5968]

Why is my 2070 Super default clock speed is around 1700?

[@user-ns9fc]

My idle voltage is higher when i apply the curve

[@perunwit1760]

Hi, I am trying your manual but my voltage, when I start it up is about 680mV, after applying -300MHz, grabbing 900mV, raising to 1900MHz in MSI AB it shows still on 700 mV and temperature 83-84°. Looks like is does NOthing... could you advise?

[@ImWateringPSUs]

I fear you need to replace your thermal paste and pads, I have a tutorial about it!

[@ImWateringPSUs]

Also be sure to have Heaven Benchmark running in the background

[@yoshimuruxx]

I have 775 mV (yours 1050) without undervolting on 2070s and GPU frequency 1605 MHZ (yours 1950) Although your value is slightly higher is this normal?

[@imkevobro]

sames. did ur pc get better?

[@pauldecaro1416]

Bella vecio ho undervoltato la mia e overclock a 2070mhz, con aio temperatura attorno ai 40, ho avuto score in superposition piu alte di alcune 2080super

[@kalle2722]

i did everything you did and when i ran the benchmark my screens went black for 10-15 seconds and the computer was stuttering before i put afterburner to my old settings. Any idea what could cause this?

[@ImWateringPSUs]

Try 100Mhz less on the core clock

[@Boyct23]

Will this work for my GIGABYTE rtx 2070s , Asrock b450 mobo ? I wanna OC my 2070s please help 😰

[@ImWateringPSUs]

Yes it will work! Consider subscribing to the page if it ends up being helpful

[@wojciu8594]

I dont recomand doing that. I was playing lies of p on 144 fps with drops to 120, but i was worried about temps that reach 86 c. After doing same things as in tutorial my game crashes each time i try to start it.

[@patriktoth6258]

Too much undervolt.

[@Eryk178]

I have an RTX 2070 super ZOTAC mini and I put memory clock to 500 and everything seems to run fine. Do you think going higher will cause issues? This card runs hotter than most on some games 80c and over is pretty normal for me.

[@Benni259]

yo same what msi afterburner settings do you have? I just got mine used like 4 days ago

[@Eryk178]

@@Benni259 I got memory clock to 1200

[@ivcrxzyvi5702]

what do i do if the volt isnt hitting 700 and it just keeps fluctuating

[@ImWateringPSUs]

follow the tutorial!

[@ivcrxzyvi5702]

@@ImWateringPSUs i did

[@christopherm6994]

What do you recommend doing for a rtx 2070 mobile gpu on a GL75 Leopard? Not seeing any voltage changes but I have a different version of afterburner and still did the graph trick.

[@ImWateringPSUs]

Yay basically follow the method in the video but lower voltage and lower clocks!

[@harshit132]

My fps drops by 11 after this :/ Ambient room temp. is 22c, do I need to undervolt if it not helping with fps?

[@ImWateringPSUs]

Try giving it 50 more mV and an extra 150Mhz

[@Quinsterrr]

This keeps crashing call of duty. Other games work just fine. Any tips?

[@ImWateringPSUs]

Yes! 900mV 1800Mhz +200Mhz mem. Consider subscribing to the channel :)

[@NiOxDanilo]

When I hit apply I still can’t see my voltage

[@oblivionlord1242]

hi mate, isn't voltage control completely optional? When I've undervolted I've never had to enable this option? would like to know more, cheers dude :)

[@ImWateringPSUs]

It is, but if you don’t unlock them you won’t be able to see the voltage change via the rivatuner monitor!

[@kevthefisher]

Yes MANY Thanks. Your Numbers just 'work' - at least on my card :-)

[@ImWateringPSUs]

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps the channel!

[@samuelebutti9085]

Why with the same GPU, i've 300 mhz, 405 mhz of memory and a voltage of 650mv like starter setup?!

[@ImWateringPSUs]

You need to open heaven benchmark :)

[@star-bs1bu]

when i apply it says 681 mv and not 900

[@s3official875]

Thanks bro💪

[@contiki6277]

Hello mate ,i have seen many of your videos and learn how to undervolt a gpu. but i have one question. why do you set a minus 200 or 250 to your core clock on afterburner first and then raise the frequenscy.I have seen other tutorials that dont do that..They just raise the frequency without lowering a number in the core clock bar.What is the difference in those 2 methods?

[@Miedzianek]

raising frequency without lowering core clock number is just OC+UV, Here you have undervotling only

[@contiki6277]

@@Miedzianek i ve been searching for days for a straight answer like yours and i couldnt find one ,super thanks man!! keep up the great content.. cheers!

[@ImWateringPSUs]

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps me a lot!

[@GO.......]

Bro help me...i google Rtx 2070 super maximum watt is 215.... But my 2070 super is using more like 230 watt.. reply fast

[@ImWateringPSUs]

No worries, just follow the Undervolt procedure :)

[@GO.......]

@@ImWateringPSUs ok bro.. I'll try this .. now

[@GO.......]

@@ImWateringPSUs should i untick voltage control and voltage monitoring after saved everything?

[@AhmedAlm3r8]

Thanks man ❤

[@ImWateringPSUs]

It’s my pleasure, really :)

[@jizu-]

i did what youltaid bu my voltage is only at 781 mv? i dont know why

[@ImWateringPSUs]

You need heaven benchmark open and to subscribe to the channel :)

[@hungmanh348]

Does this work for regular 2070?

[@hrvojemilicevic3309]

My Rtx 2070 mini Zotac still running at 86 celsius even after this

[@ImWateringPSUs]

You’d need to replace the thermal paste and pads, I have a dedicated video for it

[@d4nith3]

The card was boosting to 1950MHz core clock. Why you limited to 1900MHz? You can do undervolt with targeting the same core clock as original.

[@ImWateringPSUs]

Aiming for the absolute best efficiency you generally have give up a small amount of core clock to gain in absolute efficiency. Most cards will be able to sustain 1950 but I wanna make the tutorial work for everyone so 1900 is a safer choice, is still higher than the sustained clock the car had. Good point though :)

[@MischaN54]

With only 50mhz lower i can run 0.9v instead of if 0.95...and I think I try 0.88v now. On 1950mhz I wasn't stable to me under 0.95v. The card is now consumpting only max 130watts by max 60-62 degrees. And also +300mhz mem clock :)

[@Skilled9000]

-13000hz mem +512hz core . _it sets different values from actual goes -562 mem, +0 as infinite in core. works perfect for me

[@Skilled9000]

Temperature drops instantly and does not go over 85celcius ever

[@ImWateringPSUs]

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps me a lot!

[@amanterobot]

ciao! proverò sulla msi 2070 armor. Quindi seguendo la tua guida la scheda dovrebbe consumare meno, generare meno calore e addirittura aumentare gli fps? Ho capito bene?

[@ImWateringPSUs]

A seconda di come la setti si. Col preset che consiglio io non vedrai un grosso incremento degli FPS a meno che la scheda non si stia surriscaldando: vedrai un incremento degli .1% fps

[@amanterobot]

grazie x la risposta. Ok proverò!

[@sergiofn3753]

will this get me less or more fps?

[@Quarker]

I repasted and added new thermal pads to my 2070 Super - that alone had the biggest improvement on thermals and noise. The Gigabyte model which I have had horrific paste from the factory, it had completely dried up. I recommend every owner does this! My temps don't go over 70C and fan does not go over 65% when maxed. After undervolting, the max temp sits around 4-5C lower, and fan speed sits around 55%. My benchmark results are exactly the same so somehow there's no performance loss! It's a minor but noticeable improvement, but the repaste and pads did most of the work. Thanks for posting this!

[@Anonymous-ki2og]

Hahaha this is an awesome comment to see, I literally just did this yesterday on my 2070super (gigabyte windforce). Thermal paste was all but gone, and it looks like they didnt have much on there to begin with! My thermals dropped 10c !!!

[@ImWateringPSUs]

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel!

[@ImWateringPSUs]

Repasting is always key :)

[@SHiroo0]

Where can I buy that camera stand?

[@ImWateringPSUs]

Ahahah I got it on Amazon! But it only works if you subscribe

[@oggamer4442]

Bonjourno, I see your GPU is 60 degrees when you run heaven benchmark.... HOW is that so low? I have a AMD 3700x and a Inno3D 2070 super @1440p resolution. My GPU Temp is 80 degrees when I run this benchmark

[@ImWateringPSUs]

I did a proper repaste with MX-6 and new Thermal pads, as well as undervolting it as shown in the video! I'll make a repasting video soon as well!

[@oggamer4442]

​@@ImWateringPSUs I found the problem. If I use the same settings in Heaven benchmark as you did in the video it was set to 4K resolution. With proper settings I have the same max 60 degrees (Y) . Thanks for the video, my temps in COD are 20 degrees lower :)

[@entoma_]

this works for RTX 2060?

[@ImWateringPSUs]

Yes!

[@ocerco93]

so i wanna to understand, cuz i thought undervolting was lowering the performance.. but its only for 2000series most likely ??

[@ImWateringPSUs]

It’s really all about HOW you undervolt It!

[@lukeauslender6494]

My 2070 S never went over 650,v and this cut my FPS by 20 - 30? xD

[@ImWateringPSUs]

650V under load is impossible

[@LookkAttMee]

hi man is it work for rtx 2060 super ?

[@ImWateringPSUs]

Yessir! But only if you subscribe to the channel

[@Flamez8364]

My screen turns black screen and can’t open any apps

[@ImWateringPSUs]

Try 900mV 1800Mhz with no mem offset :) And subscribe to the channel

[@VR00100]

Who else has an overheating Gigabyte wind force card here (I have the 2070 and it goes above 80°c in some games)

[@ImWateringPSUs]

The video will fix it! But be sure to subscribe to the channel

[@davothecat]

bel video grazie :D

[@maxkrug2000]

thanks bro

[@ImWateringPSUs]

My pleasure :)

[@upecch]

Shoutout to your girlfriend filming this video and her reflection in the screen! 🙂

[@ImWateringPSUs]

Ahahahah you spotted her! :) Consider subscribing to support her work too :p

[@axelschalen9609]

does it work on a 2060 also?

[@God_Ku]

hey , my volt shows 0 whats the problem ?

[@d3lt333]

he said in the video that you need to turn on unlock voltage control and unlock voltage monitoring, 0:53

[@ImWateringPSUs]

Thanks a lot man for telling him!

[@God_Ku]

Thanks a lot guys , it doesn’t work for me I guess .. the screen just going blue when I apply and I need to restart

[@d3lt333]

@@ImWateringPSUs Np, thanks for the vid

[@Johnn7Cag3FN]

Ty❤

[@ImWateringPSUs]

My pleasure my man! Consider subscribing:)

[@pierpallescrotini714]

Hai Afterburner settato in Italiano,ma parli perfettamente in inglese.

[@ImWateringPSUs]

Confermo😂

[@DaniWayne369]

this does nothing but making my games crash..

[@ImWateringPSUs]

Try 900mV 1800Mhz with no mem offset & be sure to subscribe :)