Unleashing Power: Keihin Carbs Install & Test Ride - Exciting RESULTS!

🚀 *Welcome to the Ultimate Keihin CR29 Carbs Experience!* 🚀
In this video, we dive deep into the world of Keihin CR29 Carbs. Watch as we take you through the entire process of installing these high-performance carbs. But that's not all - after the install, we hit the road for an fun and exciting test ride to see just how these carbs stack up to the OEM carbs
🔧 *What You'll See in This Video:*
- *Step-by-Step Installation:* Easy-to-follow guide on installing Keihin CR29 Carbs.
- *Technical Insights:* In-depth discussion on the benefits and features of the CR29 carbs.
- *Real-World Performance:* Taking a ride showcasing the carbs
Don't forget to *LIKE**, **COMMENT**, and **SUBSCRIBE*
#KeihinCR29 #CarbInstall #MotorcycleMods #PerformanceUpgrade #TestRide #DIYMechanic

[@SirChlorine]

Murray is swinging the air right now.

[@zsgarage7710]

Hahahaha, he can swing away!🫡

[@maaseyracer]

I run the CR33 carbs, if you want a bit more low end pull, go to a company called thunder products and get a product called a torque wing. Works very well and helps to keep air speed up at low throttle openings. The other thing they sell, but can be harder to install on the Keihins is a product called an intelajet, which injects preatomized fuel into the carb, makes these things pickup from around mid throttle on up and makes these bikes incredibly tuneable. The tuning on these carbs is tough and with Sudco now gone parts are hard to find, I ended up having to buy a ton of jets and slides to get everything sorted right. Here is the thing, I had these running well, and I thought all was well, but i heard an airy lean off idle sound and went to richer needles until I hit the richest needle (yy5). The needles for these carbs are all the same except the off idle diameter. I then went to a richer slide, and changed the idle jet to match the new slide. HOLY SMOKES these carbs are so good. I run thrunder product torque wings on each side and I am in the process of installing the Intelajets.

[@zsgarage7710]

Definitely good to know. I went and looked up the torque wing. May need to dive deeper and watch some videos about them! Thanks for sharing!!

[@rolandwheeler4842]

Nice to see a 4 carb setup like that. I ran the CR carbs on my racebike. Very impressive.

[@zsgarage7710]

They’re great carbs and I’ve been really liking them a ton! I’m looking forward to taking them out and getting a longer ride in!

[@denzaloneal4192]

My boys rippin around his dope bike with Travis Scott fragments 😂 love it!

[@zsgarage7710]

HAHAHAHA, got to rep!

[@dERpAtiTuS]

I traded my Murray's that were running rich and had the throttle hanging problem for a set of CR29's as well. I had to tune them some, but they are imo far better than the dual Mikuni setup. Feels snappier as well with plenty of midrange and better top end.

[@zsgarage7710]

It is a CR29’s are in a different world then Murray’s carbs. Definitely need some tuning but overall, really awesome carbs!

[@fishingtheusa2398]

Just discovered your channel! Such high quality vids and info to use for my cb750. Keep up the good work!!!

[@zsgarage7710]

Really appreciate it! I love videography and I love building motorcycles! So, it’s been a ton of fun!

[@kaijudt8358]

Again Nice Video. It looks that your backtire nedds a little air

[@zsgarage7710]

Yeah, it definitely does! Good catch for sure though!

[@theemark]

Immediately clicked on the video

[@denzaloneal4192]

Same! Haha

[@zsgarage7710]

You guys are awesome!

[@zsgarage7710]

@@denzaloneal4192 Appreciate it!!!!!!

[@ArcticNightwind]

I would love to see a dyno comparison of the twin mikuni setup and the quad Keihin setup. The quad carbs just look so much better IMO.

[@BuffMyRadius]

I'd also like to see the Keihins dynoed with velocity stacks. I had a CB550 that I got as a cafe that never really tuned up correctly on the stock carbs with pods. Some ebay stacks and time on the lathe yielded some 120mm long velocity stacks I could fit pods to. It fixed all the fueling issues and I'm convinced it added 10% more power, the difference was pretty shocking.

[@zsgarage7710]

One day I might be able to do that!

[@zsgarage7710]

I love that! I wouldn't be surprised if it added a 10% increase in power!

[@GoldenBoyGarage]

much better than murray's stupid 4into2 thing.

[@zsgarage7710]

Hahaha, definitely nice to be back to the 4 club!

[@ch-ir8ld]

this bike is getting EXPENSIVE $$$

[@zsgarage7710]

Hahaha, yes it is!

[@ch-ir8ld]

did you sync these bad boys yet? Cause I didn't see you do that

[@zsgarage7710]

Not yet. I wanted to get a video out asap. So, got to sync them off camera or maybe do a short on syncing!

[@modofokafilms5621]

Where can I purchase a set of CR carbs? Can you provide me with the website

[@zsgarage7710]

This is the website that I used. dynoman.net/carb/keiCR.html

[@modofokafilms5621]

@@zsgarage7710 big thanks!! Love your videos and builds by the way 👌🏻 keep up with the great work

[@mauricehill5782]

Nice 😊 how much for a set of carbs

[@zsgarage7710]

Let’s not talk about that out loud! 😮😅😊

[@mauricehill5782]

@@zsgarage7710 gotcha

[@Fezzler61]

@@zsgarage7710 Whoa! at first. But, if one rides the bike a lot - trouble free - worth it. I have a set of Keihin 627b on my '78 CB550. I rebuilt them and the worked great a few years. Now, one or more are leaking gas when I stop - stuck float or float needle I guess. The ole "tapping" with a screw driver handle trick isn't working. I probably need to take them off and do some cleaning/inspection. I was thinking of trying to drain and blow air up the overflow. Or I've read you can rev the bike and the drop the throttle and choke and it can clear something out. LOL. Rebuild a bike. No problem. GO BACK and fix things later - UGH. Just me?

[@zsgarage7710]

@@Fezzler61 I totally get it. Unfortunate, these bikes are just that way. There’s no way of not having to clean or make adjustments. Unless you have fuel injection?

[@caseysmall3428]

Throw some vaccum gauges on them shits and sync em

[@zsgarage7710]

Hahaha, I know I know. I should be able to get some sync time in on Thursday.