Part 6: 2015 Chevrolet Silverado LTZ Duramax rebuild. The marathon weekend has arrived!

This was my Friday night and Saturday morning in my 2.5 day marathon to take the parts truck apart and swap all of our good parts from the original to put the truck back together. It must be ready to roll out of the shop Monday morning. It sounds like more work than it is. I actually got to relax with a little leftover time. We can finish up our dash and get the cab ready to go on the new frame.

[@fordnut4914]

Them cordless drivers are a life saver on project like this.

[@vehcor]

I'm not a fan of them, they can't always keep up but you cannot beat them for interior work. No more dragging hoses though the interior. Thanks for watching!

[@omarkhan9966]

The scope of this project is huge. Very impressive. Great series.

[@vehcor]

It is a little more manageable when you break it down into little jobs like the first few videos. But who wants to watch that??? Let's see some work get done, right? lol I really don't have that much time invested in this, I'll tally it all up at the end. It takes me longer to make the videos. lol Thanks for the support!

[@jimwiskus8862]

Absolutely vintage Scott. Incredible memory and mechanical ability.

[@moldingpro7208]

I always hit "like" on your videos before I even watch it because I know it will be a treat!

[@jewllake]

me too!

[@vincentblue8247]

@@jewllake yall me as well. He's raw

[@vehcor]

Thanks, glad you like them! I think I have vastly improved from the first ones. Always room for improvement, so I keep improving! Thanks for the support!

[@ardillasecreta]

I admit, I have also haha

[@keefershere]

That wrench on the park brake cable is genius. Thank you 👍👍👍 life will be so much easier now lol.

[@vehcor]

No problem, I always try to throw tips like that into every video. Thanks for watching!

[@keefershere]

@@vehcor oh I appreciate the little tips, life easier things lol. I just started watching because "the mistake" video popped up in videos and was intrigued lol. Also helped its a gm lol. But im subscribed and continuing to watch. Keep up the good work.

[@vehcor]

@@keefershere Thanks, glad to have you here. I will continue to share bits of knowledge whenever they fit in with what I am doing.

[@geminidreame]

It’s a pleasure to watch a skilled craftsman work. Your channel deserves to have at least 92633936353729282626283 subscribers. 😊

[@vehcor]

That's a lot of subs! lol I'm getting there. This truck brought me almost 40k of them. I'll probably have some more of these trucks if I can ever find a good deal but they are way over priced right now. Thanks for watching.

[@marleneriegel5181]

I stumbled on You video by accident, I enjoy watching how you show how to tear down and put together a vehicle. Can’t wait to see your next one👍

[@vehcor]

Thanks, I enjoy the work as well! Thanks for watching.

[@delboytrotter8806]

Beats me how you remember what goes where!

[@vehcor]

Lots of practice. Thanks for watching.

[@carthrasher8022]

If you did an hour video, I would watch it. Don't know how you remember where all the fasteners go. Like the labeled container "trick". Thanks for sharing, looking forward to more! Nice simple explanations, no extra "chatter" required as on some others. Refreshing!

[@vehcor]

People seem to have short attention spans sometimes. lol Even the 20 minutes is pushing it. I have had lots of practice so putting fastners back gets easier. I don't know which container you saw but it must have been my bad hand writing. They are all labeled for the parts they came from. Thanks for the support. See you on Friday!

[@ralocustoms3818]

A Pre workout cup is the best nut and bolts holder. Lol Great vid

[@vehcor]

You have found my secret! lol Thanks for watching!

[@Casey2]

That alone would be a winter long project for me, blows my mind that you do all that in a day or 2 in someone’s else’s shop workin around their schedule and transporting parts and tools. I am lookin forward to see how you keep track of nuts and bolts and parts placement on jobs like this. Good work man.

[@vehcor]

I think the motivation of a deadline is what helps to keep me focused and efficient. I'll get the tutorials started again when I am done with this project. Thanks for watching.

[@ba7tow1776]

Its amazing what one can accomplish in a weekend when you put your mind to it. Can't wait to see the finished build.

[@vehcor]

.....and you have to get it out of the way by Monday. lol I can't wait to drive it. Thanks for watching.

[@francineganmor9952]

Just stumbled onto you this AM man... What a freaking treat!! A man who has worked his ass off,gained the knowledge and experience to make the absolute worst scenario,seem easy. Damn you,,,now I'll be watching your videos incessantly :( Some guys drink, smoke,chase women... I've always neen obsessed with wrecked late models... My ony surprise from your genius.... That you don't degrease and steam your work before digging in. No matter your situation. It makes EVERY single job go easier/smoother/better. I know it takes time to do,but it is worth EVERY second. Thanx for sharing!!

[@vehcor]

Glad to have you here. I make fun of those guys that clean everything before they start. lol I don't have time for that! lol It would be nice, but it just gets dirty as I work on it anyway. It makes me feel like I get my money's worth when I send it to the detailer as well. lol Don't get me wrong, your process works for some, just not me. If I had a shop of my own and a designated place to clean stuff it might be more efficient and something I would start doing but right now the time savings just isn't there for me. Thanks for watching and I'll try cleaning something before I work on it. I have the perfect project, I look forward to your "I told you so" comment! lol

[@docholiday1034]

Thanks for your taking the time.....what did we ever do with no cordless tools....frame swaps with air hoses everywhere.lol

[@vehcor]

I'm old school and refuse to accept the new technology!!!! I still use the air tools quite a bit. For interiors I mostly use the cordless but everything else I like the air or a combo. If I try to do this job with all cordless, they don't charge as fast as I run them down, they can't keep up! lol Thanks for watching.

[@kenanyfarm1577]

i love how you make your videos, not too much preaching just a simple description as you go along, i will never want or be able to do what you do so i just like to enjoy watching. keep on trucking

[@vehcor]

A lot of viewers share your opinion. These videos are made up of their ideas, so I/we have them to thank. What I do isn't for everyone, sometimes it is just about the learning of how it is done. Thanks for watching!

[@AllThingsMech]

I sincerely admire your work ethic, man. This is a metric crapton of work to squeeze in on nights and weekends, and you do a stellar job.

[@vehcor]

I really do like the work and I think the fact that I have a deadline keeps me focused and efficient. Thanks for watching!

[@silvabrite1828]

mad respect... that's a lot of work. can't wait to see the finished truck!

[@vehcor]

Thanks, this is my favorite type of job so it does not seem like work at all. I can't wait to drive it! Thanks for watching.

[@jgatti8742]

You sure knocked out a lot of work... Damn.

[@vehcor]

I need to wear some headphones, then I really get work done!! Thanks for watching!

[@markconley996]

Your trick about the e brake cable, also works on cables going thru the brake shields on the rear ends, when I swapped axles on my old square bodies....

[@vehcor]

Yep, anywhere that has those darn 3 tab clips they have used for decades. It works on the newer two tabs but you can cheat those with a screwdriver pretty easily. Thanks for watching.

[@bigmatt503]

This has become one of my favorite rebuild chanels. This guy is insane and has a ton of patients and skill and is pretty entertaining

[@vehcor]

Glad to hear! I am insane, according to a lot of people and the voices in my head. lol The skill and patience comes with years of practice. Thanks for the support!

[@Speeddemon3]

Nice work around with the E brake cable clips!

[@vehcor]

Sometimes the simple solutions are the best!

[@joel.3112]

Glad to have came across your Channel make that work look easy look forward to watch other uploads thanks.

[@vehcor]

Glad to have you here. I think it is easy. It is just removing bolts. The quantity is what scares people but with enough practice, it is not too hard. Thanks for watching!

[@Roadranger1944]

Amazing you make it look so easy keep it up

[@vehcor]

It is pretty easy when you have had a lot of practice. 😃 Thanks for watching.

[@albee286]

Man, you inspire me to learn more about my truck. The amount of time, patience, and the background knowledge you have. Great job. Looking fwd to the final piece.

[@vehcor]

I'm learning about this one inside and out. lol I have had a lot of practice at this kind of thing. Thanks for watching!

[@milehighkit4725]

Thinking back to the days before the screw gun :-) everyone had one real strong wrist! Can't wait to see your video on how you keep track of all this crap.

[@vehcor]

Yeah, it was like working out at work. Now I have to go to the gym as well. lol Thanks for watching!

[@Martinbergin]

Very well done great work

[@vehcor]

Thank you!

[@anthonycadiou8367]

Mr SPOOTY, your doing a excellent job, really good.

[@troyphillips8607]

I Love the view

[@jakebrake2300]

Can't wait until its finished

[@vehcor]

Tired of my videos already? lol I can't wait either!

[@jakebrake2300]

@@vehcor 😂😂 Just can't wait to your next project!!! I enjoy your videos

[@vespamorelli7090]

So glad I found your channel! Subbed straight after first video about 3 days ago and now on “binge watch” ever since 😂 love your approach and the way you explain everything. Can’t wait for part 6 !!! Thank you !!! Tom ( Ireland 🇮🇪)

[@vehcor]

Thanks, glad to have you with us! The video style is all thanks to my viewers, it was all of their suggestions so I can't take all the credit. Thanks for watching. Best wishes from the USA.

[@rogercusack1136]

I literally forgot to breath watching this.Super interesting.Your talent is amazing to watch and no it’s not EASY!!.you work like a clock ticks.A Rolex infact😂Huge thanks from🇮🇪.

[@vehcor]

I have become fairly efficient over the years. Lots of trying methods to find the ones that work best for me. Glad you like the videos. Best wishes from the USA! Thanks for watching!

[@rogercusack1136]

Lovin’ the build.Cant wait for the next.🤩

[@stevejanka361]

Good afternoon Scott, wow you could be a one-man assembly line for the GM truck plant here in Fort Wayne Indiana. I have taken three tours of that truck plant and every time it looks like the people are taking more parts off that were installed wrong, then were installed properly. You must have a photographic memory to know where everything and all parts go. As I've stated before I have to take reference photos of everything. Thanks for a great Friday afternoon video. Can't wait for next week's edition. You have a good week. Take care.

[@agger838]

Guessing these videos probably help lol

[@idiotsavant7276]

Don’t give GM any ideas, they’re already looking to let go of as many bodies on the assembly as possible 😂

[@vehcor]

That is impossible, the factory only makes perfect products. All the problems come from that minor fender bender on the CarFax..... or at least that is what I hear from all the brainwashed people. lol If people only knew what went on with their vehicles before they got to the dealer lot. I have gotten in the habit of taking more pics but those so far are just a failsafe incase old age hits me all at once and I can't remember anything. I remember the important stuff like how to put cars together. However I can never remember where I put the tool I had 30 seconds ago. Although, goofing off this weekend and making a video, I did figure out a very unorthodox method to keep track of tools. Have a good week! Take care as well!

[@tahirusman5929]

Great stuff man.Youre a hard worker for sure.Rock on!

[@vehcor]

Thanks, it doesn't really seem like work since I really enjoy it. Thanks for watching.

[@Bam799]

very nice job I am a fan 👍🏼

[@vehcor]

Thank you, I appreciate my fans!

[@johnpartridge7623]

I've had a few f**k-ups like that but then we're only Human. This was a very good re-build 👍

[@draco24433]

Great video. Thanks!

[@vehcor]

Thank you and thanks for watching!

[@luisplacencio2669]

Very good video. Thank you for share your knowledge 👍🏼

[@vehcor]

Thanks, no problem!

[@NickLoecke]

Man I wish all the door water barriers came off that easy! 4:20

[@vehcor]

These new GM barriers are the best so far. They stay tacky and can be reused easily. Not like the Honda goopy messes. lol Thanks for watching.

[@NickLoecke]

@@vehcor I have an 08 Chrysler 300C and had to replace 2 door handles so far. The shields crumbled apart and the glue stuck tot he door. PITA

[@ansdguy1]

Scott, a man (or woman) knows that they are a gearhead when they spend countless hours watching a master mechanic (technician) do a major repair and restoration such as yours. I find your work to be relaxing and enjoyable, even though I will never attempt anything like what you are doing. Of course, I have been a car guy and gearhead since the early '60s. So, yeah, I'm very old at his point. Btw, you and I have the same dry sense of humor. Cracks me up. Thank you!

[@vehcor]

Thanks for the support. I do enjoy the work and glad others can enjoy it with me. Some to learn and try it on their own and some to learn that they don't ever want to get involved. lol I like the new stuff, it is much easier to work on but nothing looks as good as the old stuff! Thanks for watching.

[@NHHalKnowsHow]

That trick with the ½" wrench on the emergency brake cable is great! How many of those have I fussed with using needlenose Vise-Grips working around endlessly. Thanks for yet another great tip!

[@vehcor]

You are not the only one! Just trying to help. We don't want everyone to be driven crazy and turn out like me. lol Thanks for watching!

[@garyhodder2784]

Excellent video,looking forward to the finish!👍

[@vehcor]

Thanks, me too. Getting closer!

[@michaelstephen3202]

Love ur videos man ! You need ur own shop bud ! Know guys with own shop who have half the knowledge you do . Imagine the possibilities (productivity )-can’t wait for the next video and final product.

[@vehcor]

Thanks but I'm not sure I would be as productive in my own shop. Part of what makes me move as fast as I do is the deadline to get it done. When I have time, it takes me forever to get things done and motivation can dwindle making it worse. lol I have though about my own shop but I do like my job and the security of a constant paycheck. We will see. I have learned to never rule anything out! Thanks for the confidence and support and the day I get my own shop you are all invited!

[@chuckbixler3570]

Great work Scott always look forward to watch you work on this truck. Can't wait for the day when I watch you start it up and take it for a drive.

[@vehcor]

Thanks, that day is coming soon. The worst part is, once it is done I still have to wait for the inspection before I can start using it. Worst part of any build for me! lol

[@colinblankenship2401]

Thanks for sharing

[@vehcor]

Thanks for watching!

[@matthewmcdonald529]

Great videos love them .... I always used guitar wire to remove windshields just have to b careful in the corners depending on the vehicle

[@vehcor]

Thanks, we still use the wire for windows occasionally. Windshields never go well for me no matter what I use. lol Thanks for watching.

[@jeffreymarshall7420]

My lord. Please tell me the secret to remembering where all those bolts go. I go to painstaking levels to ensure there are no extra bolts. Keep it up brother. But why is the carpet dirty..... lol I know time but since you had it out you shouldve power washed it and put in some new car fragrance.

[@bondovwvw]

Zip lock bags are a Bodymans best friend

[@toxicity4818]

17:01

[@jeffreymarshall7420]

@@toxicity4818I watched the video. I wanted to reinforce the subject. XD.

[@agger838]

I think some guys use cardboard to stick the bolts through in same layout

[@NOPetroleum]

I am looking forward to that tutorial as well!!

[@Rayman8929]

You're amazing, Bro.

[@tomislavlulic9330]

I love how you voice over and explain what steps your taking, first time I have ever seen a utuber do that , great series buddy

[@vehcor]

You have to thank your fellow viewers, it was all their idea. I just fix cars, I need a little help on the video stuff. Thanks for watching.

[@andyplage6590]

I'm fortunate as a new subscriber I can binge watch altogether great series impressive resulting in a great rustfree vehicle 👍

[@Bediasman]

Great video series, thank you

[@vehcor]

Thank you and thanks for watching!

[@johnyoung4467]

Top job mate.

[@vehcor]

Thanks!

[@kickit59]

Scott you are doing an excellent job on this rebuild! Even though it will be an amalgamation of parts when done it will not be a Frankenstein truck! You will have it looking like a million bucks! Your hard work is turning a disaster into a success story! Well done!

[@vehcor]

Thank you for the confidence and support! I was hoping people would realize the moral to this story is, don't just give up and take the easy way out. Even I considered the easy way at one point but after getting into this build, it is turning out better than I could have imagined. Thanks for watching.

[@doncoiner8128]

Great video. You don't mess around when you're putting something together. I can see that you know what you're doing. Keep it up I sure enjoy your videos.

[@vehcor]

Nope, I have a deadline I have to meet that keeps me focused. I don't stop for anything. I even forget to eat sometimes. lol Thanks for watching.

[@1986yamahafazer69]

Well worth the effort, excellent work.

[@tgh75]

Wow you are making this build look a lot easier than it is. Great job and I cannot wait for the end results

[@vehcor]

I have had a lot of practice. It is really not that bad when you break it down into smaller jobs. Thanks for watching!

[@circlepfarm9729]

Your videos are awesome! Thanks for taking the extra time to set up your camera, etc...and sharing them with us!

[@vehcor]

Thanks, it really adds time to the build but it is kind of fun for me and a little break as I work. Thanks for watching!

[@LandoTopBestChooses]

Love how the truck coming along

[@vehcor]

Thanks, so far so good. Getting better by the day!

[@LandoTopBestChooses]

@@vehcor keep it going bro

[@stephenwhittier6439]

👍 nice job !

[@vehcor]

Thanks!

[@kruleworld]

nice job, going well

[@vehcor]

Thanks, indeed it is! Thanks for watching!

[@ronniecardy]

Very good as always. I enjoy watching people work when it all comes together you do really good work

[@vehcor]

Thanks for the support.

[@Nova-ku6dg]

When I watch you removing parts, cabs, etc. And then assembling all of them back on. All I can thing of is how many thousands of people had to put it all together on an assembly line!!!! A friend of mine worked on that assembly line, (retired now). All he had to do was put the front seatbelts in the truck, handing on the drivers seatbelt to the other guy and then putting a few bolts on his side that hold the center console. He had just a little over two and a half minutes. We built Scouts where I worked, ( I mentoned that before), but it was much easier assembling the Scout then what is involved in the new vehicles that are built. I also have to chuckle when you comment on some of the things that had to be redone once in awhile. Blows my mind when I see, most of the time you are doing a whole assembly line wortth of work! Much of the time all alone. Keep up the the good work, I enjoy it very much.

[@vehcor]

I get to know all my truck on a very personal level. I like working alone, very few people can work with my level of efficiency. That being said, there are a few. When they help, the work we can do in a short time even amazes me. If you watch my older time lapses the Yukon, Sierra and C1500HD there is a friend of mine with me the entire day and we have fun goofing of as well as getting work done. He would be there everyday if he was not 2 hours away. The others come and go for minutes at a time when I just need an extra pair of hands. Thanks for watching!

[@Nova-ku6dg]

I have noticed that you have a system most of the time. And yep, you sure are effeciant .I am always smiling when your videos com up. Stay safe, work hard. Jack

[@eldoradony]

Your videos keep getting better. Can't wait for the next one!

[@vehcor]

I'm getting a lot of practice on the videos on this one. lol You don't have to wait long! Thanks for watching.

[@mi16t]

Dude,i WISH i knew about the wrench trick for the ebrake cable clip!!!!! Damn it, the struggling that thing caused!!!

[@vehcor]

I'm here to help! I did struggle with them as well. I actually own the correct tool. Once I did not have it with me and I went back to the struggle. After about 5 minutes it dawned on me that I could use a wrench. So I struggled, learned, struggled and learned again so don't feel bad I had to learn TWICE. lol Thanks for watching.

[@richardwilson6787]

Outstanding video. You continue to give me an appreciation for my car and how it all manages to work every time I start it up! Thanks for taking the time to show us how it’s done.

[@vehcor]

Thanks, no problem. Thanks for watching!

[@leerhill]

Thank you for taking the time to show the whole process I would love to be able to do this as a side gig in a few years look forward too part 2

[@vehcor]

No problem. You might want to start with a slightly smaller project. lol Good luck though the work is rewarding. Thanks for watching!

[@briantejeda7985]

I was waiting for this!

[@vehcor]

I think a lot of people were. Finally getting something done. Thanks for watching!

[@SnickasBah]

Watching the dirty carpet go in is going to keep me up for 3 nights.

[@craignilsson4473]

Thanks for the Awesome content! 👍

[@vehcor]

Thank you for watching!

[@omarnul1]

An excellent video looking forward to the end result.👍

[@vehcor]

Thanks, I am as well! Thanks for watching.

[@billstevenson7381]

New to your channel, enjoy your videos and tips. I'm impressed by your organization and ability to tackle a job of this magnitude. Thanks for taking the time to share.

[@vehcor]

Glad to have you here! I have had lots of practice and tried so many methods that I have found the most efficient possible for me. These videos give me a chance to share what I have learned with people that have not had as much experience. Thanks for watching!

[@jhonnygarcia7396]

Great job

[@vehcor]

Thanks

[@miguelcadete2495]

Was looking forward to the next video and again i was not disappointed. Great job, I'm actually learning something.

[@vehcor]

Thanks for watching. I like to hear that I can pull off the teaching thing.

[@matthewjohnston29]

Great video 👌🏻

[@vehcor]

Thank you!

[@northbndyooper6524]

Amazing work. I can't even imagine attempting something like this. Can't wait for the next one.

[@vehcor]

Thanks, it isn't for everyone but it does get easier with practice. Thanks for watching!

[@waltereturner]

Awesome video as always. I can't wait to see it complete!!!

[@vehcor]

Thanks, I can't wait to drive it! Thanks for watching!

[@barryrose8360]

You are my favorite channel! Great work. Can’t wait till next week

[@vehcor]

Thanks, that means a lot! Thanks for the support!

[@harrybalzak3909]

The work you're doing is INSANE! Gotta give respect where it's due! Would like to see how you classify your bolts tho ...that would be interesting. Good work bro!

[@vehcor]

Thanks, a lot of people wanted to see it. Here you go: kzbin.info/www/bejne/eZ28c2yLgdiBbLs

[@alexpowers3697]

You are amazing.

[@vehcor]

Thanks

[@SierraOne]

Way cool! Thanks Appears you get to see all the secrets to these vehicles Great Video!

[@vehcor]

Thanks, yes, when I am done I will know pretty much how anything comes out if I ever need to service it. Hopefully, viewers can learn some of the secrets as they watch. Thanks for watching!

[@MrDavcan]

Excellent bud

[@vehcor]

Thank you!

[@breakwood8531]

You’re such a pro, I’m learning so much from you, thanks man. (Love the shirt btw)

[@vehcor]

Thanks, years of practice. I'm glad I am able to pull of the teaching thing! I appreciate my viewers so it in nice I can give something back! Shirts are available under the description in desktop version (doesn't always show up in mobile) if you would like one. Thanks for watching!

[@lancpudn]

Awesome job.

[@vehcor]

Thank you!

[@dzachalski]

I’m excited for your truck project to come to its end. It will look really good once finished Looking forward to watching more videos

[@vehcor]

It looks good in my head, let's see if I can pull off my vision. Thanks for the confidence.

[@galehbedrousian1178]

Great fully detailed video Great job Keep posting 👍

[@vehcor]

Thanks, thanks for watching!

[@chijen2010]

Mad skills. Much respect!!

[@vehcor]

Thanks!

[@RaymondRChammas]

This is fascinating

[@vehcor]

Thanks

[@1968maz]

Good video as always! I love watching all of them, especially this pickup.

[@vehcor]

Thanks, when this one is done, there will be more GM trucks I promise. I love working on them but finding them cheap is not easy. Thanks for watching.

[@cavnz]

Been looking forward to this installment - great update, thanks for all the work you put in to making these for us!

[@vehcor]

Glad you liked it! Thanks for all your support! I'll keep making them!

[@Dan-xs1il]

I am looking forward to seeing how you keep the bolts straight in something like the dash. Body and engine bolts are no problem but making sure all the bolts go back into the dash...that is impressive.

[@vehcor]

Just smaller in size and larger in quantity. lol

[@gsettlemyre]

You had one job, one job! Love the work being done so far, can’t wait till the next installment comes out! You stated you would do a video on how you stay organized, that one I really want to see. Having worked for a small body shop years ago, I don’t remember how he stayed organized, all though he never did a complete swap/tear down like this... amazing videos, keep up the great work! Keep them coming.......please.

[@vehcor]

You don't have to wait long and hopefully I can get you one the following week but don't hold me to that one. The staying organized video will be in one of my tutorials, eventually. Everyone does it differently and I have tried many methods. The one I use now is the best I have found so far. Thanks for watching.

[@cheapskatethetrucker2690]

I couldn't wait to see this vid!!

[@vehcor]

Yep, I finally got something accomplished. Friday everything will all make sense and we'll see some real progress. Thanks for watching!

[@cutt1293]

Love your videos. I've been following this build and a couple from some other KZbinrs such as yourself and I'm always looking forward to the next one.

[@vehcor]

Thanks, it started out slow but once things fell into place it is getting done quickly. Hope to get you weekly updates for a little while. Thanks for watching.

[@craigborchardt8767]

Thanks for showing me why dealer shop rates are so high!!!

[@vehcor]

Dealers don't even do a lot of this. lol Their rates are high because they are the best, or so I am told. Thanks for watching!

[@andrewsmith-zi7db]

Hi great videos great to watch really good content really interesting to watch keep them coming

[@vehcor]

Thanks and will do!

[@sebdries]

You Sir, are a mad men :) Keep on doing what you are doing, thanks for the videos! Cheers from Germany

[@vehcor]

Yes, I have been called that a few times. lol Thanks for watching! Best wishes from the USA!

[@philoulevoyageure4912]

vraiment du travail de professionnel , bon courage pour la suite !!!!

[@vehcor]

Je vous remercie! Merci d'avoir regardé!

[@Guero823]

Good shit keep up the awesome work!

[@vehcor]

Thanks, will do!

[@QQTrick1QQ]

Great video, if you can't inspire someone to get it done, they can't be inspired.

[@vehcor]

Thanks for the support!

[@dejapollo]

You do awesome work man. Totally hooked on your videos. Wish we had more videos of the truck tho.

[@vehcor]

Thanks, glad you like them. I wish I had more time to make them. Thanks for watching.

[@davidschmidt449]

So I like all your videos but this is much better then the time laps. Great series

[@vehcor]

I actually like editing these better. They are a little harder to film but I am getting a little more efficient at that. I'll still have the time lapses for people that want to see the whole job and because it is how I started. The new camera really opened doors for me here and it has only been around for 6 months. Thanks for watching.