We Turned our 670cc Drag Rail into a DIRT DRAGSTER | 55HP Rail gets Chromoly Axles + Off Road Tires!

[@CarsandCameras]

Drag rail is back🥳

[@calebtodd3980]

Best KZbin channel out there

[@calebtodd3980]

Y’all should put a big Harley motor on something

[@jimmyhughes5392]

y'all must have had xray vision to find that again after leaving it under the camo cover

[@limprooster3253]

Finally

[@limprooster3253]

@@calebtodd3980 Nah just boost it. AMR supercharger will bring it to life

[@evil_me]

Probably the best and most real ad spot I have ever seen on KZbin!

[@CarsandCameras]

Haha thanks, the food legit blew us away. Big upgrade from Ike’s beanies and weenies (don’t tell him I told you)

[@glendecuir6317]

@@CarsandCameras 🤣🤣🤣🤣🤣

[@pro_moderngamer4943]

@@CarsandCameras This is probably the poorest thing I've ever said but does the "hello fresh" take food stamps? its a genuine question because i live in a smaller town and most of the people here have assisted living. our minimum wage here is 7.25 so you can imagine a lot of people need help.

[@stevepastore7970]

The taller rear tire definitely makes it look more like a dragster if only you could find a slick with that height, also supercharging it would be badass!!!

[@Hitycooking]

kzbin.info/www/bejne/mmilq4mkbZZ6rcWp3u

[@danielkustra9071]

i'd like to see it turbo'd. the v belt style converter will definitely allow it to get into boost more efficiently versus a supercharger boosting from off idle

[@BobbyOfEarth]

..or drop an old 1200 cc Harley engine in it.

[@angus4202]

@@BobbyOfEarth oh god yes

[@johnkilo3]

or drop an old 1200 cc Harley engine in it AND turbocharge it...

[@davessparetime83]

The new shop has a new level floor that is where the drag rail needed to be weighed

[@k1e1v1i1n]

Might be the battery causing the issue.

[@backcountryme]

@@k1e1v1i1n naw. Either the chassis is twisted, or the axles are not level and parallel. If it was the battery you would only see increased weight on one side, and it would effect the weight on the same side tires. But when the left fron and right rear are both higher then you have a cross weight issue. My family races midgets and sprint cars and one way we adjust our setup is with cross weight. We adjust the right front sprint so that it puts more weight on the ground then the left front. This makes the left rear also put more weight down. This helps with getting a good drive out of a turn because the left rear is now biting into the ground a bit more. It is actually much more complex, but that is the quick version.

[@k1e1v1i1n]

@@backcountryme your prob right but that was talked about so just giving another idea.

[@gteaz]

@@k1e1v1i1n Does the battery need to be level though?

[@k1e1v1i1n]

@@gteaz I was more thinking evenly spaced left to right , looks to be fully on the left hand side.

[@redman715]

So glad this thing finally made a comeback

[@Hitycooking]

kzbin.info/www/bejne/mmilq4mkbZZ6rcWp4u

[@leifhietala8074]

Number 1. That bass rumble, it moves me.

[@jimmyhughes5392]

you's are lucky that drag rail was able to be found again after hiding it under a camo cover

[@themoelman]

I wonder if it was in other videos under there and they didn't want to spoil it heh

[@Hitycooking]

kzbin.info/www/bejne/mmilq4mkbZZ6rcWp3u

[@nolansprojects2840]

I bet someone tripped over it and that’s how they found it

[@JETHO321]

@@Hitycooking #Carsandcameras please block this dude.

[@SaltyCracker402]

It's an invisibility cloak

[@SamuelCroin]

12:38....now I'm hungry,,,,, Anyhow, very good way to show a sponsor, entertaining people

[@aveoxus1139]

Genuinely the best Hello Fresh ad I've seen on the internet guys, also if you run a five point harness for the drag rail try to get it in gold so it matches the accent color

[@wurthmannd024]

13:06 sauce on da LIP lol. looked so good

[@saha6818]

"Either the floor is crooked or the frame is twisted." Guys, this is C&C. Let's just assume both things are true.

[@jimmyhughes5392]

it'll be fine!

[@Knee-ko]

I'd bag you for the length of the Hello Fresh ad if it wasn't for the fact that my family have been doing Hello Fresh for the last 18 months, and can vouch for the quality and taste of their meals. (Oh yeah - great to see the drag rail getting a new life 👍👍)

[@Catholic647]

I love this new idea having cooking along with your regular show it makes for good entertainment thanks guys great job on the project too.

[@JJ--CAR]

Glad to see the dragster getting to play in the dirt. Also more food segments

[@ch4aser]

I smiled like a little kid this whole video. I think i have a favorite C&C vehicle now

[@ch4aser]

Also theres no way that rotor is balanced could be adding a little zig where there should be some zag.

[@jamesmcgee9279]

Great video! Thanks for the heads-up on the Hello Fresh! The grub looks good guys! John you missed a little spot on your bottom lip. Lol!

[@robertrose1098]

It's mean!!!! I love the drag rail, great to see Issac is healing well, great to see him driveing and injoying this thing. Love your brake disc John, congratulations Charles!!! All the best to you and your wife to be, God bless you all and also those whom you love, 🌹🤗

[@GeorgiaRidgerunner]

24:38 That charles is a real go getter

[@jamesmartin9997]

I'm with Ike, #1 sounding project. That beast nearly sounds like a V8. I freaking love it.

[@DonnyT744]

Best build yet. All of your builds are good but the V-Twin dragster is the best. The engine sounds so good.

[@spyder7758]

I dig the "tsss tsss" nitrous sound when more horsepower was mentioned lol

[@anthonychristopher3744]

definitely number 1 in sound

[@yrmoma]

I'm so happy the rail is back! I've missed it so. I've been wondering when it'd be back

[@edwardbrindley7572]

Nice to see that out again, make a sand rail drawer.. ✌🇺🇸😎

[@Plentymoon]

Just got an old Briggs & Stratton running again I can’t wait to get a frame and get her rolling for small game hunting.

[@stevehetzler9113]

That is one badass mini Dragster

[@rollin19]

I like Isaac he's humble and the dude has to be one of the best mechanics in the country.

[@chplays6334]

At 11:45 I see a spiral staircase! And I can’t wait to see that drag rail wheelie

[@trtlepwr]

The added weight is quite obviously a function of the larger wheel and tire combo. Looking forward to the next track outing. 👍🏻

[@w.nurmi58]

Those bottle openers are amazing they work great!

[@beesod6412]

What an absolute beast, the tiny gas can in the front is cute, glad you fellas brought it back out into the light!

[@garrettbigbear7299]

At a quick glimpse I thought that fella was Owen Wilson... 👀😂

[@Ratkill9000]

Well that's a change I wasn't expecting!

[@DrkRydrProductions]

I love the subtle NOS sound from Charles at the end. You Guys are crushing It

[@jacobbreazeale1816]

I'm stoked the drag rail is finally making a comeback!

[@kennethdispain1807]

Man that thing is so awesome need to go to the track now

[@zkipa]

this build looks awesome. love the new chain gaurd plate. one of my favorite builds

[@thatdumpsterfirelife7530]

This thing has the BEST exhaust note.

[@danholloway3840]

I can’t wait to see more with this project. It sounds sooooo good!

[@shelbybrunhoeber2576]

Ikes reaction when you compared the drails sound to the cross kart🤣🤣🤣 the x-kart sounds good but it doesn't even compare to this monster. Kart on!

[@alexbares5338]

I been waiting to see the rail again it's one of my favorite projects

[@Hitycooking]

kzbin.info/www/bejne/mmilq4mkbZZ6rcWp4

[@JETHO321]

@@Hitycooking @Carsandcameras this guy is spamming you guys.

[@adamr9215]

@@JETHO321 Report him as spam. If enough people do, KZbin will ban him.

[@butlerproman]

@@Hitycooking Spam, spam, spammity spam.

[@bobdailey5910]

That drag shirt is probably the baddest vehicle you have ever built! I wanna see more with that 670 cause it sounds so much like a Harley gone wild!

[@CaneAtvse]

Bout time yall brought that thing back out!!! Still think this is one of the best builds

[@SocketSlinger]

I called RUST-OLEUM and sent the sales representative a link to your mailbox dragster when I ordered the paint for my scooter. It's a wonder they haven't contacted you about sponsorship. That's the most beautiful paint out of a can anybody could come up with. I'm a NC boy too lol. Love your videos.

[@derek2007]

By far the best sounding engine in yalls fleet. Period. I loved the lawn mower with this engine. Sad that Isaac got hurt on it but it was insanely good. I’ve always felt the rail was slow and the lawn mower (even though dangerous) was faster and just better

[@kolbenlp7325]

The Lawnmower is the best Project they ever did in my mind. xD

[@Hitycooking]

kzbin.info/www/bejne/mmilq4mkbZZ6rcWe4

[@dumbasscountryboy]

@@Hitycooking man you need to stop trying to jack somebody else’s views. Get better content and get your own views!!!!

[@adamr9215]

@@dumbasscountryboy Report him as spam. If enough people do, KZbin will ban him.

[@dumbasscountryboy]

@@adamr9215 thanks Adam I just did. It makes me mad to see someone try to cheat or steal something somebody else has worked hard for.

[@bonecrushercurtis6949]

Finally ,,, it looks like a dragster now with the tall wheels and tires guys. I was hoping one day this would happen. Just paint the wheel green ..Love it.

[@bobdailey5910]

But thing is when Ike closes his eyes while hes chewing you know it's that good!

[@garyjohnston8000]

Man! That would look killer with some tall skinny slicks on the back!

[@devivoman]

Food box subscription service seems like a perfect fit for an advertising sponsor! Keep up the great work guys! Bottle opener #24, makes me think of Jeff Gordon! Quit following Nascar when Richard Petty retired so never followed him, but played Nascar 98 as a kid and loved to wreck him and he made an awesome commercial for Pepsi where he took a car salesman on a hellride in a camaro disguised as a dorky middle age guy!

[@backcountryme]

We used to race against Gordon back when he was still running dirt cars. Same with Tony Stewart, Kyle Larson and several other NASCAR guys. Jeff was a pretty nice guy back then. Tony is still funny as can be.

[@devivoman]

@@backcountryme yeah, ive got nothing but good memories of Jeff Gordon, even if part of those memories are maliciously targeting him for a pit maneuver every race in the video game I played!

[@IngenGarage]

That engine when it was on the lawn mower in my opinion sounded the best when it was doing a speed run!!

[@200mmonster4]

Great cooking show. Could John maybe get his face closer to the camera. Lol glad to see this beast back in action

[@dougfuqua7868]

Fellows. I need to see that thing on the beach ! Like right now And paddle tires

[@joshvandruff1790]

Always an awesome thing when the drag rail is involved. Good job fellas. 🤘🏻

[@lancebauer5010]

Yall are awesome always a good time watching yalls video's

[@andreassvenningnatas1996]

The rail just got so much cooler

[@ni_wink84]

Cars cameras and cooking… lol Douglas alum wheels, paddles, a wheelie bar… need I say more?

[@pookysdad4884]

John, if you can make a brake rotor, why not just make your own sprockets to change gearing on the spot? You could make em split sprockets to make em faster to swap.

[@TXH1138]

store bought sprockets probably go though a hardening process.

[@4thGloryMonday]

bake em in the oven and cool em down 100 times and still wouldnt hold up

[@terryfromsouthcarolina4601]

The only common sprockets that I ever ran into that were hardened were the small ones on the output of a motorcycle. I have modified many sprockets and even in a pinch made them by drilling holes and doing a shit ton of filing. But most sprockets are just tough because you don't want to wear the chain prematurely. I don't see why it wouldn't be worth a try. I have had them laser cut before. The big thing is the precision and repeatability of the tooth pattern. If it doesn't work carve Cars and Cameras in it and sell it as a souvenir.........LOL! I say it's worth a try if you want to work out the program.

[@Lucas12v]

Most sprockets aren't hard but they're likely not mild steel either. Something with more wear resistance. The shape and precision of the tooth pattern is also more complicated than it seems. This Old Tony has a video about making a sprocket on a cnc router if you're interested.

[@la_plata3588]

@@TXH1138 the only hardening is when they cut them and its only the teeth and holes

[@kaseyjones4143]

Glad to see that dragster again I think a 50 shot should do it well . It will almost pull the tires up on dirt .

[@Adventure_Van_Upgrades]

man that dirt hog rips! what a great comeback for the drag kart & ikes face is priceless when tasting that sweet looking burger !!! brilliant content as always keep up the great work guys . following from the uk

[@shenaniganswhatsoever363]

I will never forget isaac rolling that lawn mower.. he was lucky that day. This is definitely the way to go with v-twin. You guys should turbo or boost that thing somehow.

[@vitor900000]

4:18 Its most likely the battery/exhaust/torque-converter that are all in the same side.

[@connormacquarrie1831]

need a dirt drag strip!

[@zeitgeist2720]

Air those tires out wonder if it would ride smoother. I can’t wait to see the update video.

[@KevinZ061]

We’ll it’s about time!! I’ve been waiting years for you to resurrect the dragster.

[@bigboygaming4397]

That thing is sweet! Hoping to make it to mini mayhem with my rupp hustler! YOU GUYS ARE AWESOME!🤟

[@ervingoertzen7233]

Oh man ! The drag rail comes back to life ! Awesome guys !

[@Matthew-wj8cm]

I like the rail but I think the 670 needs a supercharger kit now!

[@limprooster3253]

Grab an AMR300 or 500, run about 7 psi. Throw the juggernaut over the hill and use the broken transmission from the trophy truck. Itll run 8.50s I almost guarentee

[@davidguild473]

this would be cool sand racing at some beach

[@nstrack1017]

You need to add more bearings to the rear axle, one on each end and at least one more in the center to prevent the axle from bowing and flexing

[@BennyTygohome]

The drag rail vids were first videos i watched in this channel

[@Riv_Longsnoot]

It’s nice to see this thing back in action!

[@terryfromsouthcarolina4601]

Sweet! Suggestion.....just put one set of scales under the middle of the front if the floor or frame is suspect. It will sit true that way. Good job guys......... Terry from South Carolina

[@therockbiter8140]

The air pressure could weight the corners differently too! and an axle bearing in the center of the axle would go a long way to stop that " continuously variable tow" or "CVT" issue.

[@mikeovercash3991]

I don't know a whole lot about ceramic Bearings but what I do know is that should check them out

[@radicalracing09]

This is the first time I’ve ever wanted to stay and watch through the whole sponser

[@pollyg562]

I TOLD YOU GUYS ONCE YOU HIT 1 MILL SUBS THE MONEY WILL ROLL IN, CONCRATS ON THE HELLO FRESH DEAL YOU DESERVE IT 10 YEARS OF SLOGGING

[@pgp2880]

Yayyy the drag rail gets turned into a dirt dragster Rad!!! ✌️

[@rixkafer56]

cool ! taller rear tires gave you taller gearing fo so

[@MAN-STUFF-AND-THINGS]

A crane scale would have been easier to use I belive. Just lift it with a chain from the balance point and take a look at the scale

[@cashmoney8607]

NX kit for sure 👍

[@michaelblacktree]

The drag rail does sound good. But I bet it would sound even better with a supercharger. 😎

[@AlexTrain5249]

You mean like Red Beards Garage’s supercharged buggy.

[@corryrupe1390]

Yeah why not supercharged and N O S

[@michaelblacktree]

@@corryrupe1390 - Now you're talkin'!

[@billbry]

My Monadnock Speedway race cars used 6.20 ford 9" gears running 1.1 4th gear.. It's called cross weight, a vital circle track adjustment affecting loose or tight condition.. Jacking bolts for at least the front end is necessary to balance well...

[@twocvbloke]

Remembering the tractor incident with that engine, "Here, There, Everywhere" wold be more appropriate... :P (Sorry Ike!!!)

[@4thGloryMonday]

Charles makes a great addition to the show

[@4thGloryMonday]

start paying him

[@kyle9364]

Y’all need to get a set of racing computer scales 😂

[@henryescat1104]

Sounds so freak'n awesome! Those tires have it sitting level.. And it looks cool!

[@the44thcosmic_galaxy25]

I love how Hello Fresh turns every KZbin channel, into a culinary tv show.

[@TechKnowCSS]

ABOUT TIME THE RAIL CAME BACK.

[@lj516]

Game is called, "bedroom or shop quote" Charles: "I've got it up you can get the other one."

[@Hitycooking]

kzbin.info/www/bejne/mmilq4mkbZZ6rcWp4u

[@ScottGovey]

You guys never fail to surprise me, I have built alot of random stuff and I'm glad to see you guys building them too. If only you tube existed back then I may have had vids of older builds like yours. Keep them coming and I agree with Ike the rails is the best sounding but I remember it on the lawn tractor 1st. That was a hay day for Ike then. Love your channel and how much you have grown over the yrs!

[@kevinjohnson9372]

That chassis would be sensitive to un even tire pressure

[@GOOSEYBRUCEY]

Sharing is caring ❤️

[@NVMDSTEvil]

just let some air out and do a burnout with the quad tires, they're almost slicks already.

[@mikethompson2137]

Put more bearings on on the shaft. Like one in the middle.

[@themoelman]

29:07 I like the C&C machine and how you've found that to be fun for making parts. wonder if you could do a whole frame out of it? challenge? :) I'd love to have one, but I don't even own a welder or pipe bender - I know a welder tho

[@jasonpetrich4141]

You would be surprised what you can teach yourself In a weekend. Any Miller or Lincoln weld pak is a great starter and there pretty cheap now!!!! Watch few videos get some steal stock and start practicing!!!! Bet you have a cart built by next summer, if have the funds ...

[@pookysdad4884]

What an awesome sound! Like a Top Fuel Harley! WICKED!

[@andrewskingsley4187]

Great to see the Rail back again !

[@handiman5001]

I'm amazed the hot Burgers did'ty melt the styrofoam plates (that's why I started to use ceramic or glass) and the DRAGSTER is still your best effort guys and the new crew is GREAT

[@99milesaway41]

Yes guys, the 670 is absolutely the best sounding engine y'all ever built. I even modeled the exhaust on my 81 Virago after yours.

[@jstephenallington8431]

IT'S BAAAACK! The long awaited, (three years!) much anticipated return of the DRAG CART! I am SO happy, this has to be one of my favorite builds (top five anyway) that C&C has done yet. It's great to see in the dirt too, with tires made for throwing monster rooster tails. The added weight might have come from the new rims and tires, maybe? If you could just get it down to no more than 400#.... And move the motor forward for a little better weight distribution, and BAM! It would rock Bosco Beach!