What Are Working/Setting Instructions For A Potterton Wall Timer?

From www.justanswer...
JustAnswer Customer: Where can I obtain the working/setting instructions for a Potterton Wall timer
Andrew Smith: Engineer: Hello, Welcome to JustAnswer!
Andrew Smith: Engineer: Do you have the model or any number that are on the front or behind the flap if it has one?
lewis104: Plumber: Hello, Its the replacement front for Potterton EP2000 control box, its the one that has a small cover on the bottom left which, covers the control panel.
lewis104: Plumber: Its the control box that just clips on the front to replace the EP 2000 old control box.
lewis104: Plumber: The Potterton PROGRAMMER is a BP 2002
Andrew Smith: Engineer: Is it the EP2003?
JustAnswer Customer: Where can I get the working instructions to the POTTERTON BP2002 Programmer.
JustAnswer Customer: Your assistance wil be appreciated.
JustAnswer Customer: Frank
JustAnswer Customer: The Potterton PROGRAMMER is a BP 2002
Andrew Smith: Engineer: Ok, try this (you may need to copy and paste the link into the address bar); http:/www.heatingcontrolsonline.co.uk/instructions/POTTERTON%20EP2000%20EP2002%20EP3002%20user%20manual.pdf
JustAnswer Customer: Hi Andrew.
JustAnswer Customer: Thanks.
JustAnswer Customer: Tried the link no success.
JustAnswer Customer: E.mailed Potterton to see if they can do anything.
JustAnswer Customer: Frank
Andrew Smith: Engineer: Did you not get the instructions from the link?
JustAnswer Customer: No.
Andrew Smith: Engineer: Did the link open or were you after something else?
JustAnswer Customer: It opened, but provided nothing really in respect of my enquiry
Andrew Smith: Engineer: That is the programming instructions - did you need more?
JustAnswer Customer: It did not appear to give me anything, other than a lot of work putting it in the Web.
JustAnswer Customer: Site.
JustAnswer Customer: Is there not an easier way?
Andrew Smith: Engineer: Try this; POTTERTON CONTROLS CUSTOMER GUIDE FOR THE EP2000/EP2002/EP3002 1) THE PROGRAMMER AND YOUR SYSTEM If you have an EP2000 Programmer, then you can set the HOT WATER and CENTRAL HEATING to come ON together for two time periods a day.
Andrew Smith: Engineer: If you have an EP2002 Programmer, then you can set the HOT WATER and CENTRAL HEATING to come ON together for two time periods a day, from MONDAY to FRIDAY, with different ON/OFF times for SATURDAY and SUNDAY, if required.
Andrew Smith: Engineer: If you have an EP3002 Programmer, then you can set the HOT WATER and CENTRAL HEATING to come ON together for two time periods a day, with different ON/OFF times for each day, if required.
Andrew Smith: Engineer: 2) SETTING THE PROGRAMMER FOR BUILT-IN ON/OFF TIMES The programmer already has built-in ON/OFF time periods, which are: MODEL ON1 OFF1 ON2 OFF2 EP2000 6.30am 9.30am 4.30pm 10.30pm EP2002 6.30am 9.30am 4.30pm 10.30pm (MON - FRI) (SAT - SUN) EP3002 6.30am 9.30am 4.30pm 10.30pm (MON - SUN) These times can be used, by setting the correct time and day, as described for the 3 models in section 1.2, 2.2 or 3.2 overleaf.
Andrew Smith: Engineer: To set up your own ON/OFF times for your model, refer to section 1.3, 2.3 or 3.3 overleaf.
Andrew Smith: Engineer: If you wish to return to the built in time periods, after changes have been made to them, simply: Ensure the slider is in RUN position.
Andrew Smith: Engineer: Press and hold down the STEP & + button, then after 5 seconds, release the 2 buttons.
Andrew Smith: Engineer: The built-in times are now reinstated.
Andrew Smith: Engineer: 3) HOW TO SET YOUR PROGRAMMER Model: EP2000 1.1 OPEN DOOR from top edge 1.2 TO SET THE CLOCK Move slider to CLOCK.
Andrew Smith: Engineer: Adjust displayed time, using - & + buttons 1.3 SETTING THE ON/OFF TIMES Move slider to SET.
Andrew Smith: Engineer: Adjust ON1 time, using - & + buttons 1.4 Press STEP button.
Andrew Smith: Engineer: Adjust OFF1 time, using - & + buttons.
Andrew Smith: Engineer: Repeat for ON2 & OFF2 1.5 When complete, move slider to RUN CLOSE DOOR Model: EP2002 2.1 OPEN DOOR from top edge 2.2 TO SET THE CLOCK & DAY Move slider to CLOCK.
Andrew Smith: Engineer: Adjust displayed time using - & + buttons.
Andrew Smith: Engineer: Adjust day, by pressing DAY button 2.3 SETTING THE ON/OFF TIMES (MON to FRI) Move slider to SET.
Andrew Smith: Engineer: Adjust ON1 time, using - & + buttons 2.4 Press STEP button Adjust OFF1 time, using - & + buttons.
Andrew Smith: Engineer: Repeat for ON2 & OFF2 2.5 SETTING THE ON/OFF TIMES (SAT & SUN) Press DAY button.
Andrew Smith: Engineer: Repeat above steps to set up SAT & SUN ON1, OFF1, ON2, OFF2 2.6 When complete, move slider to RUN CLOSE DOOR Model: EP3002 3.1 OPEN DOOR from top edge 3.2 TO SET THE CLOCK & DAY Move slider to CLOCK.
Andrew Smith: Engineer: Adjust displayed time, using - & + buttons.
Andrew Smith: Engineer: Adjust day, by pressing DAY button 3.3 SETTING THE ON/OFF TIMES (MON - SUN) Move slider to SET.