What’s The Difference Between A £200 and £10000 Wireless Video System? | Wireless Video Overview

[@nicolapaoli4561]

Finally someone who doesn't spread misinformation on KZbin about the fried video ports issue! First plug power then video, and viceversa for unplugging! So many people sending their devices for repair saying they thought to do the right thing while doing the wrong one, just because they heard random stuff on KZbin!

[@isaacbedford3644]

Please make a video about the pro systems

[@Knasigt]

Yes!

[@VivaMediaInc]

We have a Hollyland set up ourselves. We primarily use it for clients to watch on an iPad in the next room or on set away from the action.

[@markymarkvancity]

@CVP I've been using a Vaxis storm 1000+ 1:4 kit for 5 years now and it's been bulletproof. Reliability and range is incredible however image compression has some banding in brighter scenes. Everytime I've used teradek it's been an absolute nightmare. Bladerunner: 2049 also used teradek and had interference which made wireless un-useable for 4 months. Thanks for giving Vaxis the shoutout they deserve.

[@michalguzikfilms]

Who wants this C300 rig breakdown video tho! 🖐

[@DastanZhumagulov]

It is such a pity there are no affordable low latency transmission systems with SDI. Sub 1000$ systems like Acsoon, Vaxis Atom or Hollyland Mars all are pretty average in terms of latency, but then the next best thing starts at 3000$ (Vaxis 1000s, Teradek Bolt 750). I wonder if getting Teradek Ace 500 and a BM SDI to HDMI converter could do the trick for the limited budget needs? Or is there a better solution?

[@takoflame4948]

pro tools cost money

[@RichardStrong86]

I think the Teradek Ace 500 was reworked into their Spark 4k products, which are HDMI only low latency systems.

[@TMD_Produktion]

Soooo… Which wireless transmitter do recommend for focus pulling with the lowest possible price but still is reliable? maybe the Teradek Ace 500 or maybe a model feom Vaxis? Thanks

[@malz]

I've got such a Love-hate relationship with Teradek modules. They make it possible to get the job done, which otherwise would be way harder, but I can't tell them reliable; there were so many times that they lost pair or signal in short distances and halting the shooting for the troubleshooting is always a time wasted.

[@janisbrod]

It's a bit confusing to me that nobody really talks about the Swit Flow system... It's supposed to have near zero-latency as well and is much more affordable than a Teradek. I wonder if there's any catch.

[@daanjessevenmans]

Would love to know more about the Vaxis system. We already use and know Teradek, but have no clue of the usability and pro's/cons of the Vaxis system.

[@byCloudNine]

Own 2 units 1000ft, love it and ranges are more than advertised- older units had sdi in on tx temporarily fail from cold weather. Each can also cross convert ie- sdi in on tx, hdmi out on rx, other than a cable switch, constant connect

[@1stStudio101]

i'm really keen to hear about Teradek solutions especially the Bolt 4K LT. I would use them with C200; C300 mkIII, DSLRs and ATOMOS monitors.

[@tsetsmagor]

Has anyone ever studied the effect of all these transmitters on the operators brain? How safe are they?

[@membernr14]

Can you please talk a little about the Boxx Atom-kit, for me it's allways been the most reliable feed but the company who makes them seems not to be realeseing any new fetures or products. It's a mystery.

[@eddieyan3017]

My rental shop has Teradeks... it has THE most issues and not that user friendly

[@JoshuaFortuna]

I would love to hear more about the Vaxis (I’m pretty sure) Unit that connects directly to the RED Komodo

[@memostothefuture]

Since you were talking about wireless: do you happen to know if the WFT-E8C still works with the C300 MarkIII?

[@LewisJamesThompson]

Very interested in a video about the whole vaxis storm line up! I’m pretty tempted to buy the 3000 DV but there’s no videos online showing the pros and cons of the new transmitter vs the regular vaxis 3000. It would be great to see the feature sets of the storm 800 all the at up to the 3000!

[@j.r.dawson]

What about the Swit systems?

[@buddyfx7026]

Vaxis Storm 3000, please dive in. Not enough info out there with the level of clarity you all could deliver. Regardless, thanks for this video. Really connected some dots for me.

[@j00mcg00]

Probably a dumb question, but I'm in the market to buy some wireless transmitter / receiver combo for my A7S3. Can my camera still record in all of it's modes (4k 120fps for example) onto the memory cards while using a 1080p monitor? Or do you have to match the camera resolution / framerate to the monitor you're using?

[@retrogamestudios7649]

Review the Anton Bauer wireless tx/rx they send mostly anyone who gives them a credit card for deposit a review test unit. I reviewed it for 4 months before they needed it back. Blows all your suggestions to the wind. Check it out

[@eddieyan3017]

Stay away from Teradek

[@justalittledaf]

Which type of Gimbal and Ring Handle Grip setup you got at the 3:37 mark?

[@MrPByH]

I can not find information about whether the sound transmits teradek ace 500

[@AlluX97]

Vaxis Storm 3000 DV on RED Komodo ;) vs Vaxis 600 V-Lock plate for Komodo

[@RichardStrong86]

The Teradek Spark 4k range seem like what the Ace 500s became.

[@rodrigoalbuquerque5454]

Would love to see a video about the Vaxis Storm 1000s ! I really want to get it but the lack of reviews is making me think twice

[@steevecleoron9795]

Can i use this system for outdoor sport livestream on facebook or youtube ?

[@timothyhuang7590]

Are you guys using the Titan Micro V mount batteries on the c300 mark 3?

[@interconnectedbeing]

What are your thoughts about the new Shogun Connect?

[@florinG]

Do you know if feeding a teradek ace receiver to a PC monitor cause or increase the delay I am looking at this option for focus pulling, thanks.

[@CVPTV]

Different monitors will have different delays. Using SDI throughout your whole chain will be the best way to reduce latency as much as possible. HDMI will add latency. Jake

[@florinG]

@@CVPTV thanks for the reply, so I take these only have HDMI connections which means I have to look at other options isn't it ?

[@EugeneMaynard]

👍🏾🙏🏾

[@alex0589]

This video was acting weird so i turned it off and on again, now it works fine.

[@najeefilms]

This dude has to be British

[@JoelRiveraMD]

Hi Jake : unrelated question : I want to buy the official Zeiss lens Gear ring for milvus 50mm MACRO F2 and Milvus 85mm F1.4 . They sell on different sizes as mini, small , medium and large. Any idea how I can figure out what gear size I need for those two lenses?

[@CVPTV]

Check this out Joel - www.zeiss.co.uk/consumer-products/photography/lens-accessories/lens-gear.html

[@JoelRiveraMD]

@@CVPTV thanks!! That’s what I needed!! You guys are the best !!!

[@jonathan.dasilva]

While I have the budget for a 750LT/Storm 3000, I would it make sense to get the 750 over the ACE 500? I feel that buying the 750 will future proof me rather than be limited to my current set up. (fx3-> ninja v-> wireless video)

[@DerZaubererFN]

stay away from teradek. Great brand, no so good products. Search the internet for problems with them and you‘ll see…

[@eddieyan3017]

Stay away from teradek, personal experience, and client whom rented them say the same. We stopped renting the terdek 750 system out

[@zhosul]

Very informative, thanks! Sorry for off top, but what’s better for mft dzo10-24 and 20-70 or set of meike lenses? Interesting to know your own experience and impressions :)

[@CVPTV]

I prefer the image of the Meike set but the zooms are going to be more convenient, so up to what you want to prioritise. Jake

[@zhosul]

@@CVPTV my thanks!

[@All2jPro]

Great Teradek commercial. It’s a shame you didn’t mention the issues faced in the real world with the Teradeks… which learned the hard way trying out different ones from the range. Vaxis is so reliable and has been giving us piece of kind…

[@CVPTV]

Sorry but did you listen to what I said in the Vaxis segment?

[@All2jPro]

@@CVPTV yeah.. to be truthful as I absolutely love the content, it’s just that this one did sound to have a bit of pro-bias, which was still useful.

[@SongvilayFilms]

Hey just wondering what are those tubes on top of the matte box on the camera rig?

[@memostothefuture]

rangefinder kzbin.info/www/bejne/e2fRY4xjg5WMf8k

[@AndyTheMartian-626]

What's the difference between these and the $120 HDMI wireless systems?

[@stefanszabo7841]

It's impossible to have 0 delay, small or unnoticeable yes, but technically it can't be 0.