What Wheels Fit a 3rd Gen Mazda 3

[@fitmentindustriesgarage5583]

What other vehicles would you like to see on our "What Wheels Fit" series?! Drop a comment below and don't forget to check out the largest online fitment gallery at bit.ly/2lEheYq

[@noelsalisbury7448]

Do you guys have an agent in the UK

[@jjjpetersen]

How about fitments for 2022 Mazda CX30.

[@pedromontano7690]

This car needs some more love

[@WolfCommander]

Needs more aftermarket support as well. _(especially in the engine bay area..)_

[@NorCalNBK]

@@WolfCommander the 2.0 L engine is the same as the ND Miata, so it does get love. They're just not branded as Mazda 3 parts

[@johnathonlevesque3784]

@@WolfCommander They are high compression engines, not much can be done besides air intake and exhaust.

[@WolfCommander]

@@NorCalNBK believe it or not, found that out today. However, I believe the bore was changed along with the comparison which is why _(I believe)_ people haven't be putting a stage 1 and/or stage 2 turbo kit on the MZ3 like the ND I know corksport said theyre working on it _(don't know of any updates since a while ago, maybe before.gen4 launch)_ and there's a british company that was also trying something _(BBR)_ but again, haven't really heard any updates. Love the style of the car, IMO I think it's the best styling of the first 3. possibly out of all 4, but it's lacking that zoom zoom imo. I also know, feeliq did/is working on a 4g63 engine swap in thailand _(I believe there)_ but once again, little updates on it. But at least we know 1 engine swap that would fit.

[@goosesayshonk9781]

My mom has one since 2014 a base model hatchback and It drives great. ( Kinda crashed it not long ago ) but Imma get one soon lol

[@autofigure00]

would love one of these vides for the 4th gen note: The first clip you showed at 0:24 was the 4th gen mazda3 not the 3rd gen... 😅

[@mstok44]

BOW DWN (intro) is a 4th gen... but ok

[@SoundBankzRec]

Mitchell Stokes exactly

[@ishannage248]

saw that and immediately went down to the comments lol

[@Okayokayshane]

I’m sorry but that car is extremely cringe

[@miggytube2049]

from what i've seen creepin thru the forums and facebook groups is that for the most part it's the rear fender that needs rolling, as the fronts are basically "pre-rolled" from the factory, so that the inner lip tucks into the fender liner shield thing in the front.

[@techtrx]

Looking for the widest + 17” wheel on it. Whats the max? And the biggest wheel & tire combo.

[@es0516]

3rd Gen Mazda 3 owners feel seen! I have Enkei TM-7s 18x8 +45 offset with 225/45/18 on my 2015 i Sport hatch, it's decent. There definitely people running 235s or 245s that rub in the rear though.

[@JonnyBricks1]

I'm running the same tire size as you with powdercoated MazdaSpeed 3 rims. 815garage is my insta if you wanna see

[@Jon-nz3dm]

there is no point in running a tire wider than 225's on these cars. you are just getting way worse gas mileage and no performance gains lol. they don't have enough power unless you have the new turbo one. I'm still on stock wheels on my 2016 i Sport hatch. car color is black, still deciding between regular silver/grey or something more toward bronze/gold. right now I'm thinking of sticking with the silver or grey wheel color for whatever I get since so many people already do black on bronze. also, are you on lowering springs or coilovers? I'm tempted to just get springs since I've heard the ride quality stays very normal with some springs.

[@stuartlow2695]

Do you have any rubbing issues on this setup? I’m looking to do the same on my Gen3 hatch.

[@SlowCarsFastSFV]

2018 GT Hatch on Enkei PF05 18x8 et 45 225 / 45 Continental Extreme Contact tires with H&R springs 30mm front 45mm rear. Rear needs slight fender rolling with -1.3 camber and .08 toe in. Megan Racing adjustable rear camber and toe arms. SPC camber bolts up front for a little negative camber and .03 toe in. Works well for a DD with Koni Special Actives.

[@SicSemperBeats]

the 19s one the coils looked the best. maybe its just because that one was a hatch and the rest were the sedans.

[@snakelda]

I'm lowered with eibach and rx-8 18's fit perfect. Kind of hard to find rx-8 wheels that aren't too beat up considering it's been out of production for a while now lol, just want to let anyone know that they fit

[@alexlecompte6929]

Did u have picture ? I have rx8 wheels on my 2018 Mazda 3 and I want to lower it but don't know which one to get 😅 juste to give me an idea

[@Henrikz]

i got the same exact setup as the third car displayed. DEFINITELY has rubbing issues, do not sit two 180lb + people in the back without rolling fenders lol my tires got alllll eaten up

[@foxcournyea]

went with a 18x8.5 with +45, Enkei TFRs. Lightweight wheels are awesome!!

[@Bbkbxibcd]

Can you do what fits a 3rd gen Mazda 6? 2014-2017 model?!

[@ripnipsey204]

Love my 3rd gen. Thx you guys .. fitment n donut all the way

[@JonnyBricks1]

did donut do a video on our car??

[@ripnipsey204]

No... not yet

[@droppedbymoney8903]

theyre talking about 3rd gens and show clips of 4th gens

[@carbrickscity]

0:24 shows the 4th gen 1:03 shows 2nd gen. And why only shows 18" and 19"? What about other sizes? 1:20 some Mazda3 comes with 16".

[@juancarlosortiz8487]

because most fitment problems come from rims with diameters of 18inches and above. if you are running 16's, you would not have much problem having it fit and rub everywhere even if your car is lowered.

[@DemonHunter0069]

Hey how many klm does the standard put on to 17s mF without drop

[@wilchambers1401]

I currently have a aftermarket wheel on my 2021 Mazda 3 Turbo with a 45 mm offset . I'm wondering if a wheel with a offset of 30 mm will still work or is that to much of a reduction in offset?

[@KnobTropper]

Can you please do one for a GEN 2 MAZDA 3 please!!!! 🥺😭😭

[@fitmentindustriesgarage5583]

We can look into it! 🤘

[@myunk]

What if I just want rims only and keep the stock tire size and suspension. Any recomendations?

[@spanglish04]

How about gen 1? I’m looking for wheels rn

[@mathieuchampagne3410]

Thanks for the video man, I’m buying a 2017 Mazda 3 hatchback in a fiew days

[@PrizmJSV]

How has the car been I’m thinking of picking one up

[@mathieuchampagne3410]

@@PrizmJSV it is amazing, no issues with it

[@erindianacathey96]

I’m trying to find good looking wheels for my 2013 red hatchback. Anyone have any ideas,?

[@azndrgnboi34]

I want to know what fits a 4th Gen in 18's!!! I want the most aggressive but still be able to add big brake kit when available!

[@fitmentindustriesgarage5583]

Shoot our fitment experts an email to [e-mail] and we can get you all of those options! 🙌

[@asidoan7]

for meaty fitment on coilover: 18x8.5 +35 with 225-45 R18

[@aminutewithjuanito7726]

Would the tires stretch on a 8.5 width for 225/45

[@asidoan7]

my front wheel has 7.5 width, with 225x45 and it made the tyre square look, my back wheel has 8.5 width with 225x45 tyre and it slightly stretch

[@FLEXNIVORE]

I have a 2019 hatback and would like to get wider tires for it as a daily driver, with stock rims. what is the widest I could get on it w/o needing any type of alterations or lowering springs? I've asked around and nobody can tell me what's the widest I can get.

[@Dro-Ordanzo]

Search up the width of the stick wheel of your Mazda then go on google and put for example “what tires fit my 18x8 wheels?” It’ll show you which tires you’re able to use

[@trungquach4797]

A guy is selling a set of rims for really cheap. They're 18x8 et+29. Would they fit alright on stock height, or stick out too much? Tia

[@johnk9290]

Thanks for rhe video. I really want the 17 inch straight 10 spoke wheels with a 55 in offset off of a 2008 miata but I'm not sure if a 55 degree offset would screw up the handling or weight distribution of the rim. Would 5mm spacers help? Or would that throw the wheels center off even more.

[@fitmentindustriesgarage5583]

That should be just fine

[@Jane-nt3vy]

Is it possible to put Mazda 2 snow tires on a Mazda 3 hatchback?

[@Zemni16]

Does anyone have any experience with the 18×8.5 with a 35 offset? This is the look that I want, but I dont really want to do anything other than roll the fenders if needed. I have a 2017 hatch.

[@dlofton123]

I have 18x8.75 et 36 with 225 45. I slightly rolled and don't have issues so you should be fine Check me out on ig @deon.lorenzo

[@ripnipsey204]

I just got a pair of esr with the same specs and its I'm gonna have to roll the fenders with the springs come in

[@woooose]

I have 19x8.5 35 offset(Avant Garde m540) with eibach lowering springs. Drove with them for several months and didn’t notice any issues. Trying to sell them now and get some 17s because this car is better off with the lightest possible rims.

[@stevgtguy]

Yup. I watched this video and used FI's fitment guide on their website and even said the car was lowered, which it is not but may be in the near future. I'm running Option Lab R716's 18x8.5 +35mm and Michelin Pilot Sport AS4's 225/45 on my 2017 Mazda 3 Touring Hatch and the wheel lip sticks out about 1/2" past the tires. I curbed both front wheels within 2 months of having them on the car. I got over it. Then I hauled a bunch of heavy stuff and when I went over some bad bumps the rear passenger tire rubbed so bad it started cutting into the tire. Thankfully it still drives okay but these wheels and tires only have 5k miles on them and they are already beat up. I'll definitely have to roll the rear fenders if I decide to lower the car. My first set of wheels/tires I've ever purchased in my 40 yrs on this earth and I made the mistake of using a place that assured me they were going to fit. Thankfully they don't rub up front or when driving at stock height when the car only has me driving it.

[@Andrew9565-AD]

Hey I have a question: I’m looking for some Mazda 3 ( 3rd generation sedan ) rims and was wondering if you guys ship them to Europe as well. I’d be amazing if you do

[@fitmentindustriesgarage5583]

Yes! We can help! And we ship worldwide daily! 🙏

[@Andrew9565-AD]

@@fitmentindustriesgarage5583 thank you 🙏. You don’t know how happy that makes me as I found some really nice golden Enkei rims with 18x8

[@EconomyElk]

3rd gen mazda 6 would be nice!

[@JMAZDASPD]

Rear does require fender roll, out of factory only front is rolled

[@blackcasanova7]

I have a 2017 Mazda3 sedan and want to put 20inch on. Can someone give me some advice about tyres size, if it'll rub?

[@cyrusprudenciado926]

Can you please do for 4th gen mazda 3?

[@BigYi313]

wonder if 18 is too big for my 2012 factory mazda 3 hatchback

[@darren.a.b7400]

Would 20x9 +35 work? Car would on air suspension

[@eddyy_3718]

I can’t figure out the trim of my car I have 2015 Mazda 3 Skysctiv checked the manual and doesn’t tell me the trim

[@juancarlosortiz8487]

check your vehicle registration. info might be indicated there.

[@eddyy_3718]

@@juancarlosortiz8487 checked the vin number and only shows the model even when I purchased it

[@juancarlosortiz8487]

What's your engine size? I believe the 2.5 in North America only came in the GT Trim.

[@peterreyes9989]

Whats the size for a 2018 mazda 3 grand touring center bore? I'm trying to buy some center caps for the wheels but i cant figure out the exact size in mm. Thank you for any help!

[@fitmentindustriesgarage5583]

67.1mm

[@peterreyes9989]

@@fitmentindustriesgarage5583 I saw that online when i googled it but i measured them myself and they come out to 81mm for me so i'm confused. So 67.1mm is for sure correct?

[@fitmentindustriesgarage5583]

Yes

[@royholt5562]

Do you think Enkei TS-5s 18x8 40mm offset with 215/45 tires would fit a gen 3 5 door sport on BC coilovers? I'm trying to avoid fender rolling.

[@fitmentindustriesgarage5583]

That should work!

[@PK-ff9qc]

i have a 2015 mazda 3 gt sedan that i just put on fast fc 19"/ 8.5 rims with 235/35 tires on stock suspension. (flush fitment) im looking into lowering it but i dont know if i should go with lowering springs or coilovers. any suggestions would be great

[@Jon-nz3dm]

I'm also looking at lowering springs or coilovers. I'm leaning toward the springs since I've heard many of the lowering springs made for this car keep the good ride quality(using just lowering springs and stock dampers). I'm probably going to lower mine first since my tires still have another 10-12k miles left on them. So then after I do that I can get wheels and tires together.

[@PK-ff9qc]

@@Jon-nz3dm honestly looking into it more and more i dont think its worth spending a thousand dollars or more on coilovers when the car really doesn’t need it. I feel like id have a way nicer ride if I spend that money on springs and sway bars rather then just going coils. The only issue atm is finding the right springs. I need about a 2” drop but i can only find one set of springs that go that low which are the corksport lowering springs.

[@WaffersCappuccinoFl]

what was your offset m8?

[@stevenrivera6159]

Im looking into 19 x 8.5 +40mm but stock everything worried its not gonna work on my 4th gen

[@fitmentindustriesgarage5583]

What are your concerns?

[@stevenrivera6159]

@@fitmentindustriesgarage5583 rubbing or having to do fender works on my 4th gen mazda thanks for replying! 👏🏽

[@oswaldoflores9206]

Yo, is 9.5 too wide for this car?

[@Daniel_Troutman]

I don’t know what any of this means

[@alexandregarant4323]

What wheel would fit a mk6 jetta !!!!gli

[@rayluckman9324]

My 2020 mazada 3 is 3rd or 4th generation ???

[@kdtcross3986]

2019 and above is 4th gen

[@MasterShake300]

00:24 in, that's a 4th gen dude...

[@ThePigs1Fan]

Glad I'm not the only one who said that to themselves!!!

[@g10lopez]

yall think i could do +35 offset on stock height without any fender rolling???

[@fitmentindustriesgarage5583]

On stock height you should most definitely be fine!

[@g10lopez]

@@fitmentindustriesgarage5583 Awesome, I’ll be getting them from you guys soon!!

[@mitchellflorentino7138]

DO MAZDA 6!!!

[@SoyTiti831]

My grandma is selling me her 2012 mazda 3 for $1k I just saw a car like mine fully modded and I now want to do the same😂

[@JDuBz815]

0:24 that's a 4th gen....

[@PivoskeGaming]

Seat Ibiza cupra 2013

[@cm581]

Reminds me of Jonah Hill

[@johnterpack3940]

Why do people still talk about wheel diameter as if it matters? The wheels don't rub, the tires do. And you can have the same diameter tire on multiple wheel sizes. Going up in wheel size does not cause problems. Only changing width and offset cause problems.

[@Kittycorn115]

What Fits: *5th Gen Honda Prelude*

[@JavierGarcia-xz5vl]

Yo what about "what fits a gen 1 mazdaspeed 3

[@spanglish04]

Looking for wheels currently so yeah

[@InherentTrash]

I see my car 😂

[@RoadRoyals]

That's a 4th generation in the intro clip ...just saying 🤭

[@shaquilledyke5926]

What fits: Lexus SC300/400

[@JDuBz815]

A dumpster

[@Llygr3839]

Its like watching Nsync dude and cars all in one

[@aaronbibeau8964]

1st Gens are better

[@cesartorresguzman919]

First. Comment