Why did I Buy a BETA 300RR 2 Stroke? + First Impressions

Why did I buy this Beta 300RR 2 Stroke? Why Not a KTM 300xcw tpi, or a 4 stroke? Is it Faster then the Honda CRF250R around the test track? Find out!

[@BoogiemanMoto]

Have owned a 2016 300 RR since new. Still have the factory oil injection, still on the original top end, 160 hours now. As mentioned in a previous comment reply down below, proper jetting and float height adjustment will drastically improve the fuel economy and performance. Suzuki NECJ or NEDJ needle will make a big difference, adjust your float height lower, you can also loop the vent tubes but I haven’t done that to mine personally. I can get 60-70 miles on the stock 2.5 gal tank without issue. Most I’ve ever gone is 72 miles before I hit reserve. You don’t need a bigger tank unless you want a lot more range. We ride in similar elevation and terrain. I ride mostly in PA or NJ. I haven’t raced in a couple years, took some time off riding for a bit but when I did I was doing C Vet Class in ECEA Enduros. Beta’s are amazing bikes. You made a very good choice and the 2020’s are a big improvement over previous years. Happy to help if you have any questions. Also the stock tires flat out suck for east coast terrain, throw an M59 front and 525 cheater rear on it and never look back.

[@dirtpirateracing1629]

I ride a 2013 Beta 250rr and love it. Not knocking any other bike and ive ridden alot of different bikes. As an older slower C 40 rider, it fits my style the best. Hope you continue to enjoy the new bike. Keep up the cool vids man!

[@theenduropest]

14:20 "Geez" sounded like Mr Garrisson haha, All that aside, awesome Rig Mate, im dying to see a long term review as I have one of these on my wishlist, happy riding !

[@duken4evr]

Sharp looking Beta! Two strokes rock - 2 strokes and carbs are like PB&J. I picked up a new KTM '18 XC as it had a carb. Put a Lectron on it, and after dialing it in, the carb is perfect everywhere and at every temp.

[@MidWestMX]

Nice bike man. Excited to see how you get on with it. I’ve had a go on a 300 but an older one and even that felt pretty nice

[@loveless2558]

Why hello there

[@andrewzakai3896]

I know Im asking the wrong place but does anybody know a method to get back into an instagram account?? I was dumb lost my account password. I would appreciate any tips you can give me!

[@gunnergideon7919]

@Andrew Zakai instablaster :)

[@andrewzakai3896]

@Gunner Gideon Thanks so much for your reply. I got to the site on google and Im trying it out atm. Takes quite some time so I will get back to you later with my results.

[@andrewzakai3896]

@Gunner Gideon it did the trick and I actually got access to my account again. I am so happy! Thanks so much you really help me out!

[@Dissentient01]

Finally!! Glad you stepped up... Best bang for buck bike. Adjust the power valve flush and call it done. I love mine.

[@ollie6512]

Love a beta! Looking at getting a 300 RR one day! Currently rocking a 200 exc 2002 :)

[@bradsanders6954]

200 KTM's kick ass,Ive had 4 of them. Oddly I like the older ones better,due to the motor being torquier down low,the newer they are the more of a screamer they are. I liked my 01 MXC200,I liked my 04 200. The 09 I had had to be screamed to go up big hills. Not an advantage.

[@lostinpa-dadenduro7555]

I’ve run the 525 multiple times. I’m using the new IRC VE33S gummy right now. It’s great. No mushy feel like the 525 when turning but hooks up sweet on the rocks and forest crap. Got a Nitromousse soft mousse in it.

[@chrisleeds4460]

2019 Beta 300rr from Brewer. The bike is amazing! You can ride up hills in the wrong gear and it just lugs right up. Have you played with the power valve adjustment?

[@jcsquared1111]

I drove from long Island New York to Lexington South Carolina for my 2021 Beta 250RR and it was def worth the long hellish drive!! Absolutly love my Beta. Hauls the mail and i can literally go and drop off my mail on the street lol.

[@poohbear6468]

Another good one! Keep em coming.

[@aussiesam37]

Great choice I will be getting the same. Ceep the video coming I would like to know if you have any problems.

[@stevemacca786]

Adjust your float height. Notorious for being too high from the factory. Loop your overflow tubes over the carb. Economy will drastically improve.

[@lostinpa-dadenduro7555]

Yep.

[@sos8747]

Not a good idea to loop the overflows

[@lboughto]

Haven't hit reserve on mine yet but I heard Beta's have really high pick up tubes so they have a lot of fuel left on reserve. I went Smart Carb for fuel economy. When I shut the fuel off it runs for about 15 mins with the Smart Carb. Wouldn't run that long on the stock carb but I didn't time the stock carb vs the Smart Carb.

[@lostinpa-dadenduro7555]

lboughto That’s pretty cool,getting that much extra run time. 👍

[@crziness5176]

@@lboughto I've had the same experience with the Smart Carb on my 500. The $700 price tag scared me at first but I bit the bullet one day and WOW, am I glad that I did. It did run great with the old carb with fine tuned jetting but the SC2 makes it run even better. I have found the power to be very linear with a very strong top end pull. My fuel lasts a very long time, the throttle response is lightning fast like an EFI bike and the power increase was very noticeable. The only thing I had to touch was the idle. I tell people that it's the best thing (let alone 700 dollars spent) that I have ever done to any of my bikes. I'm eventually going to get one made for my carburetor'd 2006 YZ250F. I actually enjoy playing with jets and needles, but after my experience with the SmartCarb I don't even want a bike with a standard carb again. I was very skeptical of the SC2 until I actually tried it and it's legit.

[@thevtadventure1062]

Such a cool bike, I always loved the Beta’s I just wish there were more dealers. Also getting parts always sketches me out...

[@utahdesertrider1806]

Vince Tucker depends where you live but the parts difficulty is a myth. Never had any issues with my Beta and getting parts is not a problem

[@grassrootslawncareservice2846]

Buy one and I'll get your parts lol. I have a dealer 10 miles away. I have to look at this bike. I've been riding since 5 and never looked at these.

[@bramnuttynck4013]

Beta for the win!! I have a rr250 from 2016 and I love it, I also ride trials.

[@brianessig]

Great bike. I had one and loved it. But I also realized I was attempting to do things I had no place attempting and realized I preferred the DS life. KTM dealers are way more prevalent so its not surprise to be more popular along with the Husky. But Beta has been gaining ground and Sherco is seeping in too. It will be interesting to see how GasGas fares with having KTM as their parent now. We definitely have a good selection of 2 strokes(and 4 strokes) for trail/woods/enduro type riding like never before.

[@sptnk87]

Don't forget the adjustable power valve, makes a huge difference how the power comes on.

[@jameshird6944]

With a new bike I am always going to tune suspension, ergos and adapt to the rest to be happy. One aspect I don't know if I could do without is the post-'17 KTM/Husky counter-balanced motor. There is little vibration. Comments?

[@MXJEFF94]

Do you get your suspension revalved or keep it stock? How suspension is on a stock bike makes no difference to me because the first thing I get done is a suspension revalve- set up 🤷‍♂️

[@johnchafin3817]

The AT81's are also some of my favorite tires

[@RWWRENTAL]

wait the beta 300 is street legal already right off the dealer? great video I have the TE250i and looking to get into a 300. I am pretty heavy and on top I want to have a higher gear to hit highway speeds for trail hopping until I get a beta 490 or something.

[@carlatamanczyk3891]

I have owned several Betas and one thing I discovered was loose fasteners and too tight of the drive chain. After I corrected those very minor issues, they were great bikes.

[@jcsquared1111]

I GOT THE 2021 250RR WITH THE OIL INJECTION AND LOVE IT !! GAVE ME THE RACING PLACTICS AS WELL WHICH I JUST LOVE THE RWB!!! DROVE FROM NEW YORK TO SOUTH CAROLINA TO GET IT AND SUV BROKE DOWN NOT ONCE BUT 2 FREAKING TIMES ON THE WAY DOWN WAS A NIGHTMARE LOL BUT BIKE WAQS WELL WORTH IT

[@Michael-kn2kw]

My 2021 300RR Race Edition has the same stickers on the front fender! Waiting on springs for it, but so far I am liking the 2 stroke more than my 4 stroke BMW-Era Husky 310R. Some of those clips also remind me of NCMP.

[@Captain250FX]

Great video! My buddy just bought a Beta!

[@SNIPER101935]

Great initial thoughts! Bought a 2020 250RR a couple months ago and am feeling very at home on mine too. My fuel economy is much better though, but I’m still figuring out my jetting too so I don’t lose power. Seems to come very rich from the factory. It’s a great company to support!

[@akula164]

How's the 250, i've heard the beta 250's lack lot of bottom end compared to the ktm/husky's.

[@GladiusJon]

Justin Redman I cant comment on betas 250. But Ktm / husky 250 had plenty of bottom end It seemed. The only reason I went with 300 is every now an again I find my self in the wrong gear going uphill. The 300 can lug down below idle speed and still pull up hills

[@SNIPER101935]

Ben Hunt I’d disagree too! I haven’t run into a hill where the Beta 250 couldn’t lug. It’s really surprised me so far. I really think Beta has the engine spot on compared to other brands- honestly the thing I think sets them apart the most. Better power delivery and more usable power than husky/ktm in my opinion.

[@Scottymuffins]

I’ve been on a 2015 ktm 250 xcw since new and I demoed a 22 250 rr and the motor was great! Really fast revving, smooth, and had good low end. Felt really light. I was right at home and really impressed. Made me want to get another 250 but I ended up ordering the 300 Race Edition. Both motors were such an improvement on my 15 KTM. It’s crazy what 7 years of technology can do. So pumped to get my 300 in Feb/Mar!!!

[@johngarcia206]

16 250 race edition with well over 300 abused hours, 0 issues other than anodizing on forks. 19 300 race edition with 130 slightly more respected hours and also 0 issues. Both bought new and still own them both. Can't wait to get another 250 race ed! M59 front and irc ve33s gekkota rear. Especially good on wet and slick roots and rocks.

[@jeffz2353]

This model is oil injected correct? I am excited for you with this new Beta.

[@lyokss]

Try the MotoZ Arena Hybrid for the rear, they make a standard compound as well as a gummy compound version. I recently purchased one (non-gummy) for my 2001 CR250R and absolutely love it, and it has been holding up very well. I am sure it is going to be my new tire of choice from here on out. I used ride with a Battlecross X30 on the front for a few years and switched to the X20 when I switched to the Arena Hybrid rear. It has turned out to be an excellent combination for me and the Sierra terrain I ride in.

[@gonesleddinggonesledding6251]

just started to build my own 500 online did u build one or get the stock set up and did u pay msrp or did they give a promootion

[@dougjc2000]

I own a 2018 RR, an excellent bike. Like you, I had a few minor QA issues that were easily fixed. I think the typical rider would love the Beta. If you must have the most advanced & most expensive bike on the market, go KTM. But, I'm not convinced it adds any fun factor for the typical rider.

[@TheCharillz23]

The betas are amazing fighting carb issues on mine.. 3/4 to full

[@kaoticmotorsports872]

Dude, that looks like a nice little bike. I love the fact that it's street legal. They don't make a lot of dual sports these days, and definitely not 2 stroke. One day I want a dual sport, this might be the bike for me.

[@Glm4149]

What did you do w your 2017 xcw?? I thought you loved that thing Just curious bc im in the market as well

[@BlueThunder69NZ]

Congrats on the purchase! Check the float height to see if you can get more fuel economy with a slightly lower setting (usually set quite high). People get good economy with a Suzuki NECJ needle as well. Oh and play with your power valve adjuster to change engine characteristics. Much more of an effect than the mapping switch. Also how does the 300rr compare to the Xtrainer you recently rode, suspension aside?

[@BoogiemanMoto]

BlueThunder69NZ Alll of this! This is exactly what I was just about to reply with. Fuel Economy will drastically improve with a Suzuki NECJ needle, setting the float height lower, and looping the vent tubes. Owned a 2016 300 RR since new. I can get 60-70 miles on the stock tank, depending on speed and terrain. Most I’ve ever gone was 72 miles.

[@GladiusJon]

Thank you both! Really good info!!!

[@carlatamanczyk3891]

In my 17 Beta 309RR, I use a 160 main, 35 pilot, and necj needle, lowered my float level, and she runs great from 2500 feet in southwest Idaho to 10,400 feet in central Idaho. No complaints.

[@Cross-Country-Biker]

2016 300rr it is my mountain goat. Ultimate tool all round

[@davidgarrison8012]

For the rear if you want to try a gummy look at the Kenda Ibex or if you want to do the 525 make sure you go with a 120 not the 110. Bring that thing to EB so I can see it!

[@justinsavs]

You might want to dial the carb in a bit. The float needs adjusted... They're always so high from the factory, Double loop both sets of lines, loop the overflow tube up and over the air intake so you're not dumping gas as much. Jetting sounds good I wouldn't change anything on it. Those little mods should help with getting more mileage out of your tank of gas.

[@eddiekelley527]

Glad to see you back on that beautiful 2 stroke brother. Welcome Home!!!

[@carlatamanczyk3891]

At the present, I have a 2014 Husky te300, a 2018 te300, and a 2017 Beta 300RR. If I were to buy a 2020, it would be a Beta 300RR. One thing you need to do on any new bike is to go over all the fasteners and ensure they are tight. I found loose bolts and nuts on both my 18 Husky and the 17 Beta when they were brand new. And the drive chain on the Beta was way too tight, so had to be loosened.

[@jetdr]

I tested a Beta, loved it but there are zero Dealers near where I live. So I am going KTM 300xc I like Fuel Injection. Where do you ride? Are the trails private or open to the public?

[@Shelby8371]

Hi What hand guards are those. Just got a Beta 2020 390👌🏻

[@Ron_C]

"hometown advantage"...lol...I'd say you ride that track like you built it! lol! Nice looking machine!

[@RacerRed]

That beta looks like fun! I would love to have a street legal two stroke!

[@patrikkulka8539]

hi,nice view !! what is the difference about fuel compustion tpi or carburator?? thank you!

[@MrNz96]

How the suspension feel though? Torn between a 250rr racing and the normal 250rr, currently riding a wr250f

[@Frog_man007]

How do you compare the beta 300rr to your buddies husqvarna?

[@hectorstewart7706]

I picked up the 2020 300RR a few weeks ago. Haven't ridden in like 15 years. Love the bike. Doing some hard Enduro stuff... Number one get rad braces. Number two, get a pipe guard. I mangled my pipe and rad on the left side. And my body lol

[@hectorstewart7706]

Oh yeah. And a softer/taller seat. Feels like a 2x4 smacking you in the ass after a 2 hour ride.

[@chiptaxfree]

How many miles down the highway would you be comfortable riding your 300 at 60 miles an hour?

[@chrisirving8712]

Such a nice build 🍁💕

[@TheShift1313]

With the stutter you had on the 4t demo try rotating your arm/wrist so that you are twisting the throttle more like you would twist a screw driver and make sure you are gripping the bike with your legs.

[@flave932]

Great bike! Have had on for a month there are little things that are problems. Speedo line has short in it down by wheel ez warranty fix.take those tires off put a 525 on rear and 81 I front confidence builder. Cruise thumper talk a lot of help in beta forums. Good luck have fun

[@BaKeDCrAcKer]

2015 Beta 250rr race edition, bought new in 15 and still has the same plug with 150hrs. 0 issues. I run a 13-49 gearing and find it gives you alot more low end. really nice bikes just the parts support here in Alberta, Canada isn't good at all. I had a crash and needed a new rad and it was 5 weeks to get the part. Also keep an eye on your kickstand, the bolt like to rattle loose, i lost my stand last year and haven't gotten around to replacing it, leaning on trees and anything you can find sucks.

[@robbed_of_sanity]

Buy a trail tech kickstand they're amazing

[@BaKeDCrAcKer]

Robert Daniel will look into it, thanks.

[@NickelStee1]

Piqued my interest, that's one sexy bike.

[@justincoull2166]

Great bike can’t wait to see how you go on it and how it lasts. Just remember to clean the air filter lol

[@ministermonkey7546]

is it oil-injected like the KTM 300? or is it premix only?

[@the-bt6lc]

Yo, Ik this doesn’t relate to this video but how hard is the hangover hare scramble at Wicomico/budds creek bc I really want to do it and I want to practice the right stuff. (From what I’ve watched you ride at all the places I do so I’m always down to meet new riders!)

[@GladiusJon]

Well, it’s pretty tough. One year it was a sheet of ice, the next year it was so muddy that ruts swallowed bikes. They had to get a crew of 4x4 quads to extract some bikes sunk to the handlebars. All the other races around our area seem to be much easier.

[@tenmileoutdoors2184]

2019 Beta 200 here with over 100 hrs. Zero issue and Beta is a great company to work with. +1 on the 525 cheater and I like the Shinko fatty on the front

[@flaccidenduro6888]

You do a top end yet?

[@kevinortiz1210]

How do you like the oil injection ? Or have you removed it ? I’m looking to get the 2021 300rr

[@markmtbrider]

Why not ? Especially when a good deal can be had. Ktm and sherco may not be as willing to negotiate. Then again we're in uncharted economic times , more or less. Congratulations on a new lap record in less than optimal conditions. Are you running the tires aired down? Nobody seems to like them in the wet, but nobody ever says what pressure they are at. Big difference between 15 psi front and rear and sat 8.5 in the front and 6.0 out back.525 extreme is a better wet/mud conditions operator than the 505 in my opinion. The tusk recon does alot for not alot, if the tall profile doesn't bother you.

[@davehowe_just_an_old_dirtbiker]

Did you really think you wouldn’t go back to a 2 smoker! LOL I love my 300.

[@rhouser1280]

Hey man, I know this video is a couple years old but if you could answer, I’d appreciate it. After riding for a while, do you still feel the same about the suspension? I’m torn so hard right now between the 300rr, 300 race edition, & Husky Te300. All things equal, I want the carb, but suspension is key. Neck & wrist issues, but want to do hare scrambles & hard enduro, amateur, riding my whole life, 42 now, but never raced, always had crappy bikes. But am in a spot to buy a new Beta or 1yr old Te300 for same price. Any input from 1st hand exp would be awesome. Thanks.

[@dalepellerin]

Just my $.02, I prefer the ZF Sachs front and rear suspension on the RR models. Every dealer I talked to recommended this suspension on my ‘23 for trail riding and harder enduro in Colorado and Utah. I’ve had really good results with my ‘23 300rr

[@MXUnion]

Love the bike! 🔥

[@ssse3123]

Is that throttle cable supposed to be routed over to the left side? Cable looks very tight.

[@kt550]

sss right side is correct

[@SkeletonManlover125]

My 2016 beta has well over 150 hours, very few issues

[@Anonymous-nu1xf]

Have your suspension guy check those fork tubes after 20 -40 hours..known issue w anodizing on some.

[@carlatamanczyk3891]

I really like the IRC VE33 gummy tires too.

[@russshappard1059]

I just changed from the IRC IX-09 to the VE33 and I love them. The IX-09 was too gummy and didn't last as few months. VE33S has done better but still grip like crazy.

[@delinquense]

Had my 2021 Beta 390 RR Race shipped without exhaust pipe from factory. Then had light kit added without asking for it or wanting it. But signals didnt work, speedo didn't work. Needed to replace signal relay to account for LED lights but dealer didn't know that so I had to figure it out. Engine leaked but fixed under warranty. Dealer didn't know that there are two places that need to have oil so almost ruined engine if I hadn't caught it. Oh, and fuel sensor was dead after a few hours. Replaced and died again immediately. Distributor says they are all like that. I think I forgot a few things too.

[@mikepurkey6070]

Crazy u can get a 2 stroke street legal. That's cool ima have to check in my state and buy one just to ride around on a 2T.

[@Gregamz]

The Beta 300 was an Excellent choice my friend.

[@aitosuomalainen7283]

Beta is just a cheaper version of a ktm pretty much

[@_adshgi_8249]

@@aitosuomalainen7283 they're so different

[@carlatamanczyk3891]

@@aitosuomalainen7283 I own both brands. One is no better than the other. Beta should come with better tires though.

[@Johnr37us]

Im picking up a used 2020 300RR with 10 hours on it tomorrow. After having 25 KTM,s I’m just not in the mood to pay over 10K for a motorcycle with Fuel Injection that runs about 80% as well as a bike with a dialed in carburetor.

[@lochimac]

If you don’t mind me asking, how tall are you

[@enduroromania4174]

Nice bike man !!!

[@AdventureDaily]

Good stuff Jon!

[@GladiusJon]

Thanks man.

[@michaelj.kastner5165]

Can i come ride these trails???

[@pik2490]

I wish to know more of this beta.

[@PatFarrellKTM]

Nice bike. Love how Beta is keeping KTM on its toes. Did you look at the Sherco or TM 300s?

[@Wafflemaste]

I own a 2020 tm en300 (carburetor) and previously owned a 2017 Ktm exc 300 and i must say the Tm is one well developed bike. The ktm creeded alot of fine tuning whit that mikuni carburetor and suspension felt akward. Sure the tm might be a bit to the stiffer side and can give some harsh feedback. But it wont bottom our wash out. And power is insane

[@jeffloucks2120]

@@Wafflemaste Curious on how they hold up parts availability? I think there may be a dealer within 2 hrs of my area.

[@moto3moto419]

@@jeffloucks2120 order online is one option, delivered to you .

[@masterchief586]

I am 59 and ride a KTM 250 xc-w--tpi and love it. I can race it and I made jit street legal here in AZ. Like your Videos. You should watch Megs Brapp videos.

[@jeffro7p202]

Im in az also and have a 300 xcw. Did the dmv have to inspect the bike?

[@masterchief586]

@@jeffro7p202 no not at all

[@ArcticWolf57]

I have Michelin AC10s on my DR200s and i love them i plan on putting some on my KDX200 and seeing if i get the same results.

[@cgeller13]

I got my KTM from Brewer cycles, good dealer for sure!

[@1122ss]

why did you sell the KTM? I am thinking of buying one.

[@russshappard1059]

Why didn't you buy the 390 other than the obvious weight and 2 vs 4 stroke? I'm coming off the KTM 350 that I won a few VCHSS and VXCS races with, and am pissed that KTM nixed the kick starter completely. The Beta 350 is too much race for me, thoughts on the 390?

[@mxgryan]

Starter wire is definitely not part of the PDI. Sounds like maybe it just went down the assembly line on a Friday. Regardless, sweet machine bro. I'm sitting here eating lunch with my feet kicked up on the back tire of the same bike right now.

[@GladiusJon]

Nice!! Yea I didn’t think it was apart of PDI. I’ll have to pull plastics an make sure no other issues.

[@ryeann2567]

How did it hold up?

[@bramnuttynck4013]

The beta comes to rich standard you can by other jets (jb jets) to give you better fuel economy

[@bramnuttynck4013]

@74 CYCLES Sorry, I don’t speak english.

[@azlong4596]

Definitely change the tires, stockers are DOT Euro legal. My 16' 300 RR has 105 hours and I have yet to do anything, same chain, spokes have never needed tightening just changed rear pads still stock fronts, the thing is crash and bullets proof.

[@jered2177]

Wow nice bike, congrats

[@carlatamanczyk3891]

I forgot to mention, I had to lower the float level in all my Betas. It helped a bunch!

[@carlatamanczyk3891]

Yep. Every Beta 2 stroke comes from the factory with the float too high.

[@lift_king]

I did that on my new 2020 klx 250 but in a snow rut looking back haha

[@skillz6786]

Where do u race because I live in va and I can’t find anywhere to race

[@GladiusJon]

Check out VCHSS, and SXCS on web or Facebook.

[@Spartan375X]

For being a brand that isn't well known, I've heard that they're pretty good bikes.

[@vasilisdedes5100]

Not well known??? Maybe in USA

[@lostinpa-dadenduro7555]

Vasilis Dedes They are pretty well known here. Very popular in my area after Husky and KTM. 🇺🇸

[@Spartan375X]

The Japanese bikes are the ones that are talked about frequently here. Followed by KTM and Husqvarnas, something like that.

[@alecoshabangbang6510]

Spartan375x for enduro or mx?

[@shawnmcginnis2508]

Beta has made trials bikes for years. Very good bike!

[@philipsmith6152]

There good bike if you can get past the main baring , electrical, brakes and suspension issues, enjoy

[@robbed_of_sanity]

Those Michelin tires are the same Jarvis is using. Just need lower tire pressure. Carry a pump with you and use tubliss or mousse with drilled holes if you aren't using on the street.

[@codyjoseph44]

Jarvis uses the gummy version, much different

[@gotopless141]

Try a volcanduro up front. Best tire I have ever ran

[@kirkthepimp1]

IRC v33s rear starcross 5 soft front 👌🏻

[@kemerer61able]

Ve33s is my go to

[@dougkershaw2844]

i thought about one of those bikes but went with the ktm because they have fuel injection i do alot of riding at sea level and the colorado rockies havind not to mess with the carb was the selling point for me

[@GladiusJon]

Doug Kershaw yes good point! I would do the same.

[@MansoyHumilde777]

Can you make these bikes street legal in tx?

[@RichLaffertyRacing]

opinions differ......cool video...nice trail

[@danpluso]

7:30 "Not trying to bag on KTM"... Did you know your thumbnail says, "KTM Sucks"? lol :P Thanks for the vid! I'm trying to decide between 350RRS and 390RRS.

[@tieoneon1614]

Those would be my picks if i was buying new currently. All they need is the soft seat and your tires of preference. I like the 350 cuz its a revver

[@ktmcrush2290]

he doesnt know ktm owns 80% of beta

[@billsmith9610]

@@ktmcrush2290 I don't think they do. But they did buy GasGas.

[@TopShotAdam]

At the Beta demo day, did you compare the 200 to the 300 two stroke?

[@GladiusJon]

I did not, but Jeff Locks did. I’ll make sure he sees your comment.

[@jeffloucks2120]

General thoughts... if I was mostly racing hare scrambles I'd probably take the 200. I'm not a big or heavy person but it's got enough grunt to get the job done in the more challenging stuff also. Light and flickable while still being stable even though it's chassis is overall slightly smaller. If you like using more of the bikes power more of the time... being on the pipe, I think you'll love it. That said it could easily be my personal only bike. I heard rumors about a Beta 200 coming in 2018 but couldn't wait to find out. The 300 I would go for if I maybe lived with more elevation change, lots of climbs, and liked really gnarly stuff. Like the other 300's you can just put it in 3rd and go. Can definately be more lazy compared to the 200. I'd say it's maybe a bit more flexible overall because of having the extra grunt. They're all capable, just need to find what fits your style of riding. Like mentioned in the videos they all felt really natural and easy to ride. 200 just lighter and more easily thrown around than the 300. Power less likely to catch you out. Anything more specific?

[@jeffloucks2120]

Actually just saw your Xtrainer video and some responses in your comment section. 300 rr sounds like the better fit based off your height and power characteristic preference.

[@DmDetails]

Solid bike