Will the 550cc Little Tikes Car Wheelie?

Our Little Tikes Cozy Coupe project spins the tires in any gear on dirt, but will it wheelie on pavement? The engine makes between 38 and 50 horsepower, and the frame is dead simple and light weight. In today's episode, we add a trailer hitch receiver to the back of the 550cc little tikes go kart, build a removable wheelie bar, and dump the clutch on concrete! Turns out, were VERY traction limited- in fact, if you look closely, you'll see that the front wheels do pick up once the kart gains momentum. On a prepped surface, I have no doubt that this motorcycle powered go kart would pull massive wheelies.
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: bit.ly/3T8njaF
----------------GO POWER SPORTS PARTS IN TODAY'S VIDEO---------------
Weldable gussets: bit.ly/38jyvc3
Go Power Sports: bit.ly/3QKyODE
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandca...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

[@brevanhansen5084]

I love the roadkill throw back at the beginning, Finnegan: "This episode is wheelie cool" Freiburger: "Did you say wheelie?"

[@nameistrever71498]

my comment exactly ROADKILL!!

[@ethanssmallengines3253]

The Ford f-6 was awesome but they should have put the flathead engine in the back where the junkyard engine was

[@jaratt85]

@@ethanssmallengines3253 or at least a big block Ford instead of a damn chevy.

[@99milesaway41]

@@jaratt85 agreed

[@ethanssmallengines3253]

@@jaratt85 this is true,I agree

[@jeremyadams1980]

Lower the rear tire pressure, heat up the tires, and then launch it to the moon.

[@zuestoots5176]

Probably not a tire that likes heat. All Season/ All Terrain, tires hate heat. They get greasy fast.

[@jeremyadams1980]

True that.

[@Cam-fo6rh]

Zues Toots those are kenda speed racers lmao they’re made for the street

[@1osmosiss]

The old rule is an inch of weld should hold a tone of wait

[@Iowa599]

Need more traction! Try dropping the rear tire pressure (a bit)?

[@westie4ageturbo.749]

Iowa599 i was about to post just that!

[@fusiondensity3287]

I was about to🐴

[@AlienLivesMatter]

And a little ballast.

[@Iowa599]

@@AlienLivesMatter heavy things go slower, just move things. Maybe the seat can go back a little.

[@charlie-qi4rh]

Jæ Š ballast would mean no more wheelies

[@colbyscrazybuilds3225]

"feels like it wants to wheelie at 30 mph .. something im not interested in doing" im down let me ride it John!!!

[@milkandcookyz]

2nd gear rolling wheelies, say no more

[@1dirtybongh2o]

Dont be scared, you have a wheelie bar, let that bitch lift up!🤘🏻🤘🏻😉

[@1dirtybongh2o]

No, I'm not.

[@wbillyxjx]

Hammering on the hitch and it falls off I about spit out my coffee! Prep twice weld once. Funnest build yet thank you!

[@SuperGlacierGirl]

It looks and sounds like a mini version of the fuel altered drag cars from the 60's and 70's. Needs a parachute on the back to add to the look.

[@99milesaway41]

Yessss

[@kennethjammie2054]

Dm to private chat

[@michwas7270]

well done gents I've been watching you blokes for nearly a year and always have been amazed at your adapt and over come attitude cheers from mornington peninsula Victoria Australia

[@kennethjammie2054]

Dm to know more [phone]

[@DanBuilds]

That awkward moment when your little tike toy is faster than your drag car...

[@lisacallie349]

I've been living that moment for years my gokart is faster than my drag car and alot of others check it out gokart vs camaro on KZbin

[@PanchoPistolas45]

Dan Builds Things OOF

[@jaregg]

I gotta say.... I wasn’t into this project since episode 2. But the final product changed my mind entirely. Way to go guys!

[@davidvanderwielen630]

Brakes and line lock up front= burnout's💨

[@kennethjammie2054]

Yeah dm me to know more

[@montanaorr6937]

Hell yeah glad to see this thing rip again. Y’all rock!

[@kennethjammie2054]

Dm to know more [phone]

[@DP-nk4vu]

Removable wheelie bar is an awesome idea! Especially with the hitch you can now tow stuff or pull stuff with it

[@shane_7even_ten569]

David Ping that’s what I was thinking How sick would this look pulling another cart and a couple bikes at events

[@terryfromsouthcarolina4601]

That thing reminds me of the AA/altered gassers of the 60's. Wicked fast but unstable as heck. Get you guys some leathers. Your skin will love you. Awesome build. Classic CarsandCameras!

[@CarsandCameras]

If you look closely, it does wheelie after it picks up some speed! Adding weight to the wheelie bar would definitely make it wheelie.

[@ericcook5170]

U should build a fxt race mower next

[@davidvanderwielen630]

Brakes and line lock up front=burnouts💨

[@brevanhansen5084]

Sounds like some whistlindiesel stuff to me.

[@Tampaboys]

Yes been waiting on this video new it was coming. This is such a cool build. You guys are killing it in the small engine gang. Love this channel cars and camera's are the best in the game.

[@Tampaboys]

Yes sir we know that's right

[@Jeff-1969]

We need a full episode of cozy coupe launching, burn out. And plenty of sound. 👍

[@michaelwoodsdale460]

With the way that thing launches - you can’t be mad it doesn’t wheelie! Nice work as always 👍🏼👍🏼

[@nameistrever71498]

how Ike asked "wheelie" felt like the stuby bob rear engine episode 😅👏👏

[@greggoliver8262]

You got my "like" vote fellas,love the build .I think its one of the top two builds in my opinion.Of course the other one is the cross cart but ill never stop wanting you guys to shoe horn that ducatti motor into it.Never the less good job,well done!Hope your channel stays around for a long time and be sure to stay safe.Dont get me wrong though cause you can be safe while being completely insane when documenting a build series by all means and i bet im not the only one who would agree with that.I wonder how many other C & C fans think the ducatti motor would be perfect in the crosscart?hmm.lol sorry,couldnt resist.Looking forward to more of what you guys do and once again,good job.Oh,you probably already know this but in the off chance you might not, i know that there is a front break set up for the cart tire size wheels your running on this build.Not sure if G P S has this,good possibility though.Only addition i would consider adding so you have the best chance in stopping ,not to mention the smoke show that thing would almost certainly do because lets face it,that machine hauls some serious ass and when you give it enough room ,firmly put your foot deep down into the oil pan and turn that sucker loose without some front breaks you better have a parachute.😎😎😜😝🤪💪👍👊!

[@speckledjim_]

That 550 looks stunning, has such a classic look

[@jonathanlunger2775]

This is my favorite project ever, so much soul.

[@mollybaumann415]

This might be the best looking and sounding C&C project ever.

[@jennifergregory9767]

Man the cozy coupe is a ripper! Love it guys. Y'all are awesome. Keep up the awesome content.

[@whatsinanamethatthecaptive577]

Static friction is higher than dynamic friction (slipping or spinning). When you are accelerating and the relative speed between the tire and pavement approaches zero you gain traction and front wheel lift. More torque at higher RPM will also increase lift (as long as it does not break the tires loose again). Very fun project and videos!

[@frankensteincreations4740]

Try dropping the rear tire pressure a little bit. It’ll give the rear end a little bit of “suspension” and it might squat, weight transfer and maybe more traction. And if all is true it may wheelie! Sweet build! Probably my favorite so far.

[@madoutlaw5486]

Put one of those engines in the drag rail

[@connieramsdell7385]

They have already try to pit a Ducati 600cc in the rail

[@mrrooter601]

drag is rip i think

[@gorgebush6604]

Deric Herndon me too

[@perfectcell7995]

@Deric Herndon they did and haven't done shit to it since

[@madoutlaw5486]

Deric Herndon Yes I do have to agree

[@Devdidthat]

When you realize the cozy coupe is coming to an end😭

[@CarsandCameras]

Not yet! Still need paint and dyno!

[@Devdidthat]

@@CarsandCameras John just responded omg I'm famous 🙃🤭

[@dakotawill219]

And a grill/hood please!!!

[@xD3VILxJINx]

Lower Psi for wheelie might help

[@braapmoto9268]

They gotta get some more tires on those wheels, then drop the pressure down to 3-6psi

[@kirklavina5314]

By far my favorite build of all time !!!

[@josepherickson7618]

Hell yeah that's badass super awesome love that build keep up the great work have a wonderful day

[@v8power561]

6:01 chickens in back round, look out chickens! You don't want to be the cozy coups dinner! Lol

[@bradleydunten3617]

When you change the axle drop 2 or 3 teeth on rear sprocket to pull some torque away. You guys should also get a set of JR dragster slicks for your projects. I still say this Cozy Coop is the most kick ass one on the internet. Keep up the great work guys.

[@dannymoore3703]

By far my favorite build. You guys rock!

[@jamesmcgee9279]

Beef up the front end for added weight and durability! Nice job guys!

[@thomasvmillerjr2031]

Love the videos keep up the good work

[@Dwayne7834]

What a good build. Just knew it would pop a wheelie with the length and hp . Maybe some different sprockets And tires it might. Thanks for sharing I always enjoy your videos.

[@suzanneandwilliamjackson6682]

Best build yet. Awesome

[@tmac1572]

I think you guys got the weight distribution pretty much perfect with the heavy motor up front and a person and big tires in back.

[@georgecosta9935]

You guys did an awesome job on this one!!

[@matthewcuccia7671]

A roll bar main loop behind the driver seat would be a good thing to see😳.... Before this winds up being like the lawn mower flip. I love the power that cozy coop is packing, and when I does catch good traction it might get squirrelly...

[@anonymousbrown]

It won't wheelie on launch, but tries to lift under power? HELL YES!!

[@trippharris1144]

Another great video guys

[@randycoolbaugh1408]

I put one of these engines in a 72 Rupp snowmobile many years back. I still have it and show it , its a blast to ride. (you tube vid).

[@drinkingripa3928]

That thing sounds sooooo goooood! 👍👌

[@ryanross3322]

This and IKEs channel are my 2 favorite channels on KZbin guys keep the great ideas coming

[@toejamr1]

1:47 that’s the scariest prostate exam I’ve ever seen

[@oylededemeseydin8320]

Dayum boy

[@colecampbell3432]

That thing is so AWESOME!!!

[@AlienLivesMatter]

That hole shot in 3rd is awesome. A tiny bit of ballast on the back will bring grip.

[@shaunmartin1417]

Have to admit this thing sounds bad ass.

[@spencerlilly4392]

Love the build! Maybe add sand paddle tires and front skinnies for the drags at Buscoe?

[@borginator1493]

Hey you forgot to say check Isaac out at Isaac it'll be fine! ..It'll be fine..

[@jerrywhalen2100]

Sounds BAD ASS!!

[@ervingoertzen7233]

Someone mentioned put one of those inline four on the dragster, I thing so too ! Give it a try !

[@alexsierra9347]

Straight drag cart for sure. Love it.

[@bartmcalister4957]

Ike is like send it it will be fine Jon first gear works lol great build guys love it

[@roborobot9709]

Put a wing in front of and above front axle. Looks cool and provides downward pressure the faster you go!

[@kalebshiver313]

It definitely needs some Hoosier jr.dragster slicks on it🤙🏻

[@Watchyn_Yarwood]

You guys did a wheelie good job on this cart!

[@brandonpanozzo86]

Thats a badass launch i want one lol

[@s2wheels]

Man it sounds so good. Sounds like a mini top fuel dragster now.

[@superkas]

Wow this is so freaking cool!!!

[@mikesrcgarage]

That thing is just crazy!

[@glendecuir6317]

Looking good love it. When and if it's ever goes to wheelie just grab another gear she will settle down

[@kennethjammie2054]

Dm to know more [phone]

[@ActivityPhoto]

What a great build. I would suggest you find some way to pull the throttle cables better as I am sure the sync of the carbs is way off. Also consider a solid state ign trigger system.

[@brianmeattey4151]

If ya want to do wheelies get some stickey low pressure drag tires then she should jump the front up plus slot more traction but is what it is lol good vid God bless

[@AYoung0609]

Loving it! Make it AWD for traction!

[@1hipcrip771]

The cozy coupe is the best sounding rig yet!!!

[@jasonpetrich4141]

Wow!!!! Now you guys should build one out of a wheel berrow tub so john can have one to race, with the same motor same design same as the tot rod!!! That would be awesome then you guys could legit race and have so much fun in the meantime.

[@dannywilliams1944]

Used to own a 750 the carb sync is everything.

[@johnmeredith60]

U need some 10in spoked mini cycle rims on front it would look awesome

[@jakeds84]

Beast mode, gentlemen. Beast mode!

[@gironoturno]

Parabéns pelo projeto

[@daddy_coolio9047]

Awesome videos guys

[@jimciancio9005]

LMAO! That things sick Guys! Awesome job! You might try lowering the rear tire pressure to get better traction on those wheels if you really intend to yank the front end up. Otherwise Jr dragster slicks!!! Tube them and screw the slicks around the beads to lock them to the rims. Otherwise you'll rip the valve stems off the tubes on a lunch. I ran them and they work amazingly on concrete or asphalt too! But just a suggestion if you really wish to pull the wheels guys. Be safe, that's definitely no tot toy anymore lol! Enjoy! Be looking forward to seeing what is up next with your entertaining antics, I love it!!! Thanks again.

[@arprecisionmodshop-1446]

Wow jebs replacement is looking good!

[@donaldflowers5654]

i love the build ive got a 1972 honda 550 ive been wanting to do something with

[@ronniewilliz153]

Killer freaking vid.

[@shawntl]

I dont miss points at all. looks really fun. might try it on black top

[@jiminyfriggit2334]

Dude's, this is one nasty machine you've made. Man I want one.

[@smilesfourmiles2714]

Pffhahaa The back of an office chair as a spark diffuser epic😂

[@joewheeler3544]

That thing is off the chain!!!

[@Toolingabout]

Lol I like the HANS device with the open face helmet

[@squarebodycasewademckenney6190]

Thay thing launches really good.... even spins the tires in 3rd dang man lol

[@race-all]

Less tire pressure & get the torch out. Cool little big kart. Wheelie bar should have some spring to it so it get's you down & moving faster. Wide kart slicks on the hard top would be the way to go. In sand some paddle tires would be awesome.Traction bars, make some.

[@digitalbarrito3555]

this thing is pure silly, and I love it

[@ronaldtowns7291]

That is as kool as kool aid. Even if it never wheelies it’s bad to the bone. Can’t wait to see more of it.

[@addicuscohen]

Need a bigger tire. I love how this one sounds.

[@quadfather504fpv9]

It's still awesome even tho it don't wheelie , i so gotta build me one , looks like tuns of fun lol👍👍

[@shenaniganswhatsoever363]

Not gonna lie I never thought a cozy coupe could be cool (say that ten times fast). Thanks for proving me wrong.

[@armedinbama]

Wheelies are cool, but so are smoky burnouts! ;O)

[@johnpaquin8041]

I love go power sports they sponsor a large park of the videos that I do watch

[@riddikulousgamingchannel4884]

I think you guess should try the wheelie again but drop the rear tire pressure for more traction. Just a thought love you guys and everything your doing I'm currently going to try and make a gas powered power wheels

[@thegenerousdegenerate9395]

You guys need to pretty her up. Put on some cool lil headlight buckets like the ones you used to get for oldschool bicycles. You also need a C&C license plate sticker and red led tail lights on the rear. Perhaps a front wing or layed back faux grill would help keep the front down at speed with some aggressive aero?

[@allenmckinney9533]

A flat bed trailer for the ratrod wagon would be awesome.

[@Nograc_]

Yessss. I'm completely on board with this.

[@HouseOfThe8Strings]

If this doesn't happen, I'm writing a letter to the editor

[@allenmckinney9533]

@@HouseOfThe8Strings lol

[@john.houston402]

Now this is something I could get behind

[@kennethjammie2054]

Dm me to know more

[@dirtyfax]

Need to drop the tire pressure and the front might come up on launch. Those rears are burning in the center only.

[@kennethjammie2054]

Yeah dm me to chat private

[@williamlee1429]

Well cool! You didn’t set out to build a wheelie machine and you don’t have one. It’s a win-win.

[@allensandven0]

Air down those tires damit , I know you can make it wheelie !

[@Icecoolsa80a2]

The only thing I can try and to help you guys would be a air dam wing. For the front to get some aero to stop the front lift at speed. Just my two cents anyway love your channel keep up the good work guys cheers.

[@jonbrockman5308]

I see some really nice muscle cars in that garage. Maybe build one of those and make it lift the front tires. Cool projects but build those cars🤘

[@johnpaquin8041]

This is a great kart wheelies or knot