World Famous 1/8 RC Buggy In Fun Form! Kyosho MP-10e ReadySet

Here’s a ⅛ off-road buggy that will grab some attention, the Kyosho MP-10e Ready Set found here: bit.ly/3Oo7L1M This is the latest version of the well known MP10 that has been altered to be an affordable ready to run for fun or even hitting the track for some laps. Greg hasn’t had a Kyosho ⅛ in his hands for years and is excited to go through this new buggy with you. After the break-down he heads off to RC Madness for some laps and you might be stunned with how well this buggy performs!
PRODUCT FEATURED
INFERNO MP10e Color Type 1 Green
By: Kyosho
Type: 1:8 Scale Radio Controlled Brushless Powered 4WD Racing Buggy
Price: $559.99
Buy: bit.ly/3Oo7L1M
You’ll need: Two 7.4V LiPo batteries with T-Plug, Charger and 4 AA’s.
Visi: kyoshoamerica.com/
GET RC STUFF
SHOP AT HORIZON HOBBY:
SHOP AT A-MAIN: bit.ly/3LldNPa
RC DRIVER SHIRTS & MERCH: teespring.com/stores/rc-drive...
RC GEAR WE USE: www.amazon.com/shop/rcdriver_...
FAIR RC- bit.ly/3Rnm3OV
REDCAT RACING- bit.ly/3N9EMgO
HANGAR RC Crawler Obstacle Kits- bit.ly/3USjho2
INSTA360 Action Camera- bit.ly/3PfuZbK
DEAL CENTER
Specials at Amain Hobbies- bit.ly/44MCPOe
Deals at Horizon Hobbies- bit.ly/3NhLkKu
$5 Off at FMS, Use Code: RCDriver bit.ly/3UWpY8t
10% Off At Sterling Kit Engines, Use Code: SK10 bit.ly/43EHxO4
5 Great Beginner RC’s Under $200
Traxxas Slash- bit.ly/3oYFfKR
Arrma Granite Voltage- bit.ly/3XdyMZ8
Axial SCX24- bit.ly/4406G5M
Losi Mini-T- bit.ly/4406G5M
Traxxas Stampede- bit.ly/3Je1wLe
Team Associated HooniTruck- bit.ly/43J1mnB
MY FAVORITE TOOLS
MIP Power Tool Hex Bits- bit.ly/3rFwPZT
Makita Li-Ion Hex Driver- amzn.to/3NdxWqJ
Duratrax Soldering Iron- bit.ly/4643vvE
Lexan Scissors- bit.ly/3PgZcXY
Side Cutters- bit.ly/3CBbmDa
Pliers- bit.ly/464xIKZ
Shock Pliers-
MIP Thorp Hex Drivers- bit.ly/4412lPB
MIP Nut Driver Set- bit.ly/3CudgWk
Pit Mat- bit.ly/3JhUR2V
Tire Glue- bit.ly/446sblv
Dremel Tool- amzn.to/3N8mnAR
Traxxas Driver Set (for on the go) - bit.ly/3p9Azlh
Don’t Miss A Thing! Follow Us:
Subscribe To Our Main Channel: bit.ly/SubToRCD
Instagram: / rcdriver_online
TikTok: vm.tiktok.com/ZM8FHDs8G/
Website: www.rcdriver.com/
*Notice: Some of our articles, videos and descriptions may contain affiliate links or coupon codes, which means that if you click on or use one of the product links/ codes, we may receive a small commission. This helps support the website and social media channels and allows us to continue to produce content. Products shown may have been submitted by the manufacturer for review which is why the Paid Promotion label may be on the video. The manufacturer has accepted our terms of providing an unbiased review to our audience. If there is an actual monetary exchange for the content, we will verbally announce that the video is sponsored.
#Kyosho #RCDriver #rccar #rchobby

[@django2467]

I would enjoy a series of you running and tuning this buggy to compete locally

[@CliffLaLonde]

It flies and lands so smooth. Amazing , makes me want one bad!

[@shuster1921]

That thing flies so sweet, I think this is what my Son is getting for his birthday! Great Video Greg, and you're driving Great!

[@ZombieGamingMetalhead]

That buggy looks gorgeous

[@lauracolesanti3419]

no one does a more smooth buggy than Kyosho ! always been top notch in my book

[@John-rb8fb]

Omg that thing is awesome. My first rc was the kyosho altima chain driven 4wd. Thing was a tank. Took a beating. I just might look into this one 😊

[@deltabravo1811]

Love the intro! It's exactly the same with motorcycles, as if bouncing them up and down in the showroom simulates flying down the track. Sweet suspension, dude!

[@kaosr.c]

Now that is a buggy i must have in my collection !! Awesome video mate

[@thudtheace]

Thinking on picking this cap up in the spring for some club racing. Last time I drove an 1/8 scale was a nitro car back in the 80's. Cheers!

[@JamesBond-hz2tn]

Great driving you rip it up looks like a awesome rtr👌

[@RC4X4]

Great review. The MP10 looks good. I'll have to add one to my collection next to the MP9.

[@nemesis8664]

Now we are talking! Got myself a decent collection of Infernos and now I'm including that one to it. Well, the TKI version to be more precise. Kyosho knows a thing or two about making true racing buggies and has never dissapointed me in that sense.

[@stlrider4714]

Like you mentioned, it can easily be a competitive club racer. Tire swap and a few other mods, TX/RX swap and tuning, she'll podium at alot of clubs. Additionally, 40+ drivers like me enjoy seeing her in the A Main lineup. Ask me how I know..LoL 😂

[@MitsuhashiTakashi]

What weight shock oil do you run and also any other advice for mine

[@turbo5483]

Wow what a great buggy and track 👍

[@SuppleBun]

this buggy has shown that it can not only drive well on the ground but also glide through the air so smoothly too!

[@n22pdf]

Wow looks awesome and goes so well love it 😊👍😃🥇Pete

[@israelserrano5332]

Good information thanks

[@RACEABLE]

WHat a smooooth machine!!!!!!!

[@TheLastTater]

Great looking buggy, just a bummer they didn’t go with hex hardware

[@TheDoozie43]

Yup. Why I went with a TLR Typhon instead. Very impressed with it btw over the 10e and I own plenty of Kyosho stuff.

[@MitsuhashiTakashi]

I'll tell you right now get a jis screwdriver and you will be ok stop using Philips on these

[@250hdd]

This is nice from Kyosho. There arent a lot of option for those of us wating racing perfromance & lightweight out of an 1/8 RTR package. I just wish they used hex hardware

[@azrul666]

Yeah man, the cheaper Fazer MK2 lines comes with hexes..

[@williamperri3437]

No hex! Kidding me? Best looking buggy no doubt but the Serpent will be tougher and the TLR Typhon is another choice but the Serpent is about the same price.

[@EJ-74]

NIIIIICE 👌🏻

[@electricnitrorc]

Kyosho making some nice RCS especially their nitros 🙂

[@Trabevion]

It looks realy realy fast what did you feel?

[@bradkalman2353]

You should try the mp9 one.

[@teamsargentrc6399]

Love kyosho. I hate finding parts available 😒.

[@Iamfirebird360]

I may pick up the nitro version.

[@nsbob70]

YEAH! What's up with no shock botts on almost any cars these days!? Phillips type hardware should be made illegal. Idunno what's all the rage with these new "cab forward" looking bodies, but to me, old school nitro boy, they look really goofy! Seems to have plenty of oomph on that track, launches off those jumps really really well it seems! I have 20+ year old Inferno MP7.5 sports that I was considering making electric. After going through the manuals, and parts diagrams, and putting together a wish list on AMain's site, my list got to be over $250, and that was just a quick, seeing the obvious parts I'd need, attempt, and not including speed control, or even a body, so I thought might make more sense to just buy an entire car! Anyway, great review! You really started to gel with the car on that track. Nice to see an RTR run that well out of the box, but of course, we are talking Kyosho!

[@adhikawidjaya2447]

Does competition model like this can move backwards on its own in case it hits the track corner? If not mistaken, the nitro version can only brake but no reverse.

[@Holmanrc]

What would it take to make this a truggy as far as the gearing?

[@jacobsparks4419]

That buggy seems incredible

[@nicolavap4079]

hello what batteries model in this vidéo pleaz?

[@drawstraw4483]

I this it's. " J.I.S" for Japanese international standard. I've not used one, but it's said to be a better fit. True fit

[@arifhafizan7430]

hi, wanna ask.. how is this compare to the asuga xlr 6s?

[@RCVictoryLane]

This would be a solid first buggy for someone getting into 8th scale. Swap out electronics, tires like GV is doing and tweak the shocks a bit and you can have a go in novice or sportsman ebuggy

[@superchargerone]

Why swap out the electronics? The existing ESc and motor is surprisingly competitive and will drive on 4s all day without problems. The servo is also decent enough. If going to change out all these then Better to use the money and buy tires or else put the money on electronics upgrade towards the higher end mp10e kit

[@butchmeister80]

Or drive it as build designed and tested be just fine don’t need racer snobs swapping bits

[@butchmeister80]

@@superchargeroneexactly surely it’s good as it comes been tested and built the way it is to race why swap stuff if rtr

[@bevinsracing]

i need a 10t ready set

[@168grhp]

Better at the track than the Typhon TLR?

[@kyronrc]

Looks awesome! But, between all RTR'S, i'd go Serpent SRX8 for sure... nitro as well!

[@ajsuperstyling]

How long does it run per charge? Thanks

[@heffe17]

Do enjoy a good buggy on track

[@jamesmccabe8736]

We sell a ton of these at train's and Lanes. Anyone comes in the shop and wants to start racing sportsman they grab one of these and go have fun.

[@jasontomica8938]

How fast is this car, 40mph?

[@whatanerd7628]

why is the gear underneath exposed like that? seems out right stupid to me :o Plz explain

[@ninja1970fin]

to prevent main being blocked by a stone, it might also loose a tooth

[@butchmeister80]

Looks decent see this as a good entry racing buggy :) and cheaper 1000 cheaper lol

[@jensg.5832]

I would replace every screw with hex hardware

[@Puertorrican_Power]

Hopefully you can respond to my comment, 8 months later...lol, but it is easier to drive with front weight distribution design than a more traditional design? When it jumps, does it have a tendency to nose dive due to this design? Thank you for your respone

[@pichurrc]

Buen análisis!, harás también uno del modelo Nitro?😊 gracias, un saludo desde España.

[@Bassin07Si]

Do you guys think this is worth the extra $100 over the mp9 evo v2?

[@ninja1970fin]

yes. batt setup is better

[@paulrobinson9355]

Wonder how it compares to the Radix 6?!

[@user-lj5nq2in2i]

I have a question if some kind of radio-controlled car like traxxas trx4 or arrma kraton 4s v2 or 6s v5 or something the same practical or fast and plus or minus 1/10 or 1/8 scale from cheap not under $ 200 or $ 300

[@MAKAWELI187]

It s a KYOSH'O BR'O

[@SoldierBoy3064]

I don't wanna build it tho

[@RCfanAddict]

First upgrade get rid of the cast aluminum steering blocks they are junk.

[@bevinsracing]

Kyosho is absolutely killing me with the Phillips screws..its 2023 c'mon its kills the entire look of the RC.

[@lukespector5550]

🧐 How many Japs does it take to change a lightbulb? 👉 Japs NEVER change!

[@MartinLaw-nq2kc]

After dealing with HPI screws which are as soft as butter I’ll take Phillips any day!

[@IISG93II]

Hex strips way easier than Phillips, to be fair.

[@mafracao]

Last year I got myself a MP9E Evo v2 RTR to go back to club racing after 20+ years out of the hobby.... Long story short: If you plan on going to a proper racetrack and actually race, go for a used "pro" car or a pro kit. The amount of $$ I've spent on upgrades and parts for my MP9E RTR is significantly greater than the money I would have spend if I got a "PRO" car right away.... The RTR's might look like the proper PRO kit, but the amount of parts that are swapped for less expensive ones really hurts its durability, specially on track use. Shock towers, chassis, steering knuckles, shafts, shaft cups, ESC, motor, steering servo.... and the list goes on...

[@themountain59]

Its funny when crawler and basher owners comment on 1/8scale racing cars😂 For the price it costs I would rather go Caster Racing or Typhon TLR ...no doubt.

[@maltesrc]

WTH does it have crosshead screws?😂😂

[@ninja1970fin]

How was the metal parts wear like diff outdrives ? if RDS they usually wear out really fast ... hope that's not the case here.... it used to be so in MP9 RDS

[@TheDoozie43]

TLR Typhon is better albeit heavier I’m sure 😢 come on Kyosho! Phillips head screws bro?

[@MitsuhashiTakashi]

It's jis not Philips and it's not a problem if you use the right driver

[@2010Hammy]

For the price I’d buy the Arrma Typhon TLR “Team Losi Tuned” 6S which comes with pretty decent electronics, 2050k motor and 150A ESC. I have nothing against this buggy or others but a bit high in price for “entry level” w/o any electronics. sweet video though!

[@Nixxtrr]

It comes with electronics. It's an RTR

[@mzondi1970]

No way would I get a arrma over a buggie maker that between them and associated have almost won a half century worth of world titles

[@roberttruesdell6151]

Was all in until I seen Philips hardware! That’s a hell no

[@Nixxtrr]

Just use a screw driver bro

[@roberttruesdell6151]

Heads strip out so easy

[@myharryface]

Well it would have been great had they put hex screws. But I'm not buying that and replacing every screw ... come on Kyosho you can do better!!

[@BeardRubEnjoyer]

Lord have mercy on my wallet.

[@JvD1985]

A shame they dont use HEX screws. That is my nr 1 reason not to buy it😢

[@BASSstarlet]

Why so overpriced?

[@rodneychalker715]

I stopped watching the vid when I saw Jas hardware.

[@thatoneguy2756]

I'm sure that buggy handles well for an rtr, but it just looks cheap. Wide chassis, crappy hardware, plastic diff cases, etc....my buddy uses these cars (previous model)for local races and they do decent but shock towers are made of butter, along with hinge pin block issues, and a few other failures that shouldn't happen. It is fast tho. It just looks and feels like a wish rc to me

[@deltazero3796]

It says MP10. So it should mean it is 1/10? Nah, it's oversized big ass 1/8 0/10 meh.

[@TheDoozie43]

It’s the successor to the mp9 1/8th scale buggy bud.

[@jbd100]

A+ JP

[@donniemarks94]

Philips head screws?

[@1521joe]

Its ok but nothing special, your paying big money for the name. For the price, kyosho need to upgrade this in at least 5 areas of the chassis.

[@Arturito2017]

I was just looking to get into 1/8 scale. How does this compare to the typhoon TLR

[@Arturito2017]

I wish he would answer this, but seems like he doesn’t give a fuck what the comments say tbh

[@ninja1970fin]

much better. TLR is a basher, not a race car like mp10.