X Smart Home Door Bell( Knock-off of Ring/Nest)

X Home Wireless Door Bell.
Ebay Link:ebay.us/DxZ4H1
You will have to order 18650 batteries from either Ebay or Amazon.

[@adsm5457]

Helped me massively many thanks ✊I’ve subscribed

[@cinders7374]

Omg you are a doll thank you 🙏 so so much. 👏🏽👏🏽❤️

[@robzta1968]

I have had this doorbell installed. This is my view of it. It really should come with an indoor ringer. An outdoor ringer on the button is pointless if you live in a large house. It also can piss off your neighbours. I have paired it with an indoor (plug in) ringer, but the outside ring remains. I've yet to discover a way to get rid of it, or at worse, turn it down. An indoor ringer should be standard stock The app is a good idea (I suppose the main point of the bell) but its hit and miss as to how it works. Its not unusual to receive a notification of someone calling 2 minutes after they actually called. That's as good as it gets. Other times its takes longer, and other times you're lucky to even receive a notification. Its now becoming apparent that it is not splash resistant. My camers lens is now showing signs of water retention (probably rain water, probably condensation), and the video is now blurry as a result. A device built for outdoor use shouldn't really succumb to the elements in such a passive way. The design of it is OK to look at, but maybe should be slimmer. Reason for me is that I have a door with a parting dissecting a couple of windows which is ideal to put a doorbell. Not this doorbell. The width of this bell meant I had to be creative in trying to mount it on a pebble-dashed wall. With the camera now virtually useless after 3 months, I am now considering giving this away to whoever wants it while I'll get myself a Ring setup...

[@marissagrimmett2677]

when i ring the doorbell on the camera it doesnt show frontdoor calling or ring

[@KT-it3jh]

This video helped me. I received mine today and your video walked me through the setup process so many thanks. 👍

[@marylawrence6799]

Thank Jesus

[@jeanfrancois5941]

I connect my to my old wired I purchase a new chimes it’s work perfect for one month I change internet provider I reset it now it’s keep ringing none stop I have to remote the wire from chimes. can any help how can I stop the ringing none stop

[@lukeswift2927]

Can you connect to multiple devices??

[@markhughes4096]

i keep tryin to add to my wifi and it keeps tellin me incorrcet password .my wifi runnin on 2.4 not 5 .gh iv uninstalled and renstalld as well .any advice would be great.thanks alot

[@mariorevolloso5478]

it realy works if I have 18 v alternating curent only?.thanks.

[@noellemccormack314]

Hi, i bought this product and as i dont have any wiring need it to work on batteries. I charged the batteries to full and it still wont work, any ideas ???

[@meatball3835]

Thanks for the info. I will give it a try. Thanks again. Gary

[@oluwaseyiilori1326]

I connected mine to my previous doorbell but its rings continuously inside the house whenever the power is on. I have to off it from the breaker. But the camera works perfectly outside. What can I do?

[@user-sx4fe7lb5m]

How to set volume for speaker. So they could hear better at outdoor. Thanks

[@terridrake9083]

Thank you so much.. This was so helpful...

[@Multi48]

Great review thank you:)!

[@davidleenelson6073]

I received a model that has entrance for AC wires. Can I connect it directly to the house circuit or do I need a transformer to lower the voltage? Can I use this connection to charge the batteries or to eliminate the batteries altogether?

[@sammoore9775]

Hi do you know how I can turn down the volume as when i am speaking to someone outside the whole street can hear it excellant video

[@pacepertutti]

Mine has the opposite problem.... the volume is too low :)

[@jacquelineeaton7277]

Thanks for the info. Mine was new but did not come with a security screw

[@CutieRingoJoy]

Is there a way to charge the batteries without take into them out?

[@raythomas754]

can you add more than 1 device to the doorbell

[@beebabs4964]

Heya, wondering if you can show how to make the phone alert come on when someone pressed the bell. I don't get any notification come up or any kind of noise notifying me when the bell is pressed. thanks heaps for the vid. it helped alot

[@black4life]

Same issue with me I dont ge5 any kind of notification when the bell is pressed but all other functions seems to work perfectly

[@bryantanderson6992]

Same here. Does this one do that?

[@beebabs4964]

I managed to get it working by messing around with settings a bit more. The latest one I changed (which I don't know if it was a coincidence) was changed Alerts to Banner Style - Persistent. This is under settings, notifications. Sounds & Badges is on. Show previews - always. Notification Grouping - By App. I hope that helps!

[@mandypowell5006]

@@black4life hi did you get your bell to come through to your phone.. i am having the same problem

[@jean-claudedecrevel6399]

Question: Is it possible to configure my Ring device so that it does not ring my current entry chime?

[@julieirwin3384]

I’ve just got this camera. But I can’t get it to work with just the battery’s ? It works connected to a charger but not the alone with battery’s & I can’t connect it to my phone yet it’s connect to my iPad

[@rehoward3706]

Your video helped me set mine up, but is there a way to get it to respond more quickly? My unit calls my phone after someone has been detected but has already left the area. I have stood in front of the doorbell and waited for it to call my phone and when it shows the picture I am not there. When someone walks near the doorbell they are gone long before the doorbell rings my phone, making it useless as a security item.

[@kaifive345]

I just got this doorbell. How is this bell work when you are not home? Will i get notifications?

[@darrylhilton1033]

Is there anyway you can make something indoor chime? We can’t alway hear it outside. Either via an amazon echo or something else?

[@robertgoodall4016]

Awesome, but what type or size is the security screw can I use? Lost mine in the dirt.

[@christinamintz4581]

Where i can I find the batteries just the batteries? Looked on ebay and Google found no matches

[@MrCrxsi09]

i have a phone charger plugged into mine trying to charge the batteries but i dont see any visual sign from the unit to say that its charging. i have put a usb cable from a ps4 into the doorbell too but how do i know it is charging? thanks

[@alpanachakravarti8331]

great video, thx. I've managed t get it to connect, but it's only ringing my app when I have the app open, which is not always. Any advice? Thx.

[@kertiszman]

Is this device set up on your home WiFi?? Can you leave your home and still connect to the device and get notifications?

[@jamesofalltrades4359]

My main question is if I connect it to my old Bell for a power source can I also retain my door bell chime. Or do I have to use the chime that’s giving. And can they both be used at the same time.

[@mikeb516]

When I installed mine, I had to leave my old doorbell button and jumper 2 new wires to the new camera which I mounted right next to the old doorbell. a little cluttered but it gives people a choice too.

[@wynnab6662]

@@mikeb516 So you’re saying the new camera won’t work with the existing chime that’s inside your house? Because that’s the problem I’m having.

[@robero11]

During the brightest part of the afternoon my doorbell keeps detecting false motion. Is there a fix for this? Thanks

[@bubbanm52]

where does the sd card go?

[@lyndairvine319]

Just received this doorbell. I can’t open battery compartment. Is there a knack to it 🤔

[@weatherSF118]

The X Smart Home video Doorbell which we received was different. On the screen inserting the batteries, t=4:14, three slots of batteries were shown where you showed the center slot with the Barcode was absent on ours. The instructions on our user manual stated that we needed to download a totally different app instead of “X Smart Home” as you stated. Without the barcode on our battery center slot, it would be difficult to pair iPhone with the Unit. The app on the instructions was called “ToSee”. It was very different from X Smart Home app.

[@alanmcm]

Finally got the Batteries sorted and Bell installed. There is a very long delay between bell button being pressed and app notifications. Up to 5 minutes. Any suggestions.

[@foz1831]

I have the same issue! Not good!

[@KT-it3jh]

You might wanna reset the doorbell. *Guys remember your WiFi speed/router location plays a part as well in terms of notification speed*

[@abbyjean2424]

Where did you get the batteries?

[@tonyhughes306]

still cant et mine to connect can get bell to ring but nothing on my mobile ??

[@moniqueblack4023]

Do you have to prescribe to a monthly payment like with the ring doorbell.

[@clairelane8115]

Hi can u by a chime bell that connect to this door bell ? I have the same one . But I can’t hear the door bell and if I don’t have my phone on me in the house I don’t no anyone is at my door 🤦‍♀️

[@OLDGIT47]

Hi I have a UBELL and it did send to my phone when first set up, although there was a long delay from pressing the bell, to getting the phone call, this all happened at home while testing, the first time that I left the house I kept getting calls from the bell, but when I went to answer it stopped, and since then it has not worked, you can view the live feed if you open the app on the phone, but no calls to say anyone has pressed the bell, Iam in my seventys and not realy into these things, I get my son to do all that for me, he has tried by resetting the bell but still no calls, can you pleaes suggest anything for him to try, thank you in advance, Johnboy. Ps I have a ding dong ringer indoors and that works fine through the bell beeing pressed.

[@chmelov]

Does it still work okay for you? Any SW updates since purchase?

[@jan29737]

Ik kan de XSH cam niet downloaden op mijn ihone 7,geeft aan niet veilig.Hoe kan ik dit oplossen?

[@4DBWW]

How do you delete the video clips that it has recorded off the app so it doesn’t show?

[@raquelgomez552]

hello, can you tell me how to remove the photos and videos from the app, thanks

[@fumiyama165]

Wonder the reason you did not connect it to the existing traditional doorbell

[@caseydowning2741]

I have same video doorbell as you but takes 3 batteries. I tried setting it up, first time worked with video then just a black screen after that. About to send back to seller whenever he gets in touch. He's asked me to send in a short video of what i was doing, told him I am fed up trying to connect and to send me a return label for eBay. I tried what you had done but mine has a antennas which i connected then inserted 3 batteries then tried to set up again. Nothing but a black screen. I have had enough. It's going back. I'm doing everything it says. Just a black screen after first attempt. Any tips, ideas would be appreciated before i send this back. I have tried this on 3 handsets, the same.

[@Devo1987]

Can you connect to the unit outside of your home wifi-network ?

[@emilyedwards1464]

I got one for Christmas and cannot figure out how to get the mount off the back to install the batteries.

[@bert-jantullemans252]

There is a very little screw on the bottom side of the doorbell. Unscrew it and you can slide it open.

[@viola647]

I brought 2, was so pleased at first for about a week but then would not work tried setting up a few times but the bell it self does not work not sure if its the battery mine came with batteries Could I have a dummy because all the ones I've seen only have 2 batteries when mine have 3🤔

[@andreashofmann3202]

I can't seem to reset my camera I removed it from the app because I got a new internet provider. I'm not getting to the menu that you're showing in the video how you connect the camera to your internet through your phone. Please help

[@andreapollitti3595]

Hi, there are all different spec batteries in the 18650 range....which ones would I use specifically?

[@farhankhan-bo6ix]

Yes most of them would work. The one from Amazon would for sure.

[@farhankhan-bo6ix]

search for the following battery at amazon. EBL 18650 Lithium Rechargeable Batteries 3000mAh 3.7V (2 Pack) and Li-ion 18650 18500 14500 Battery Charger by EBL

[@Mspula1967]

unipoodle 707 don't get flat ones at each wnds, I ordered batteries from smart doorbell company, said it was batteries that went with doorbell of that type and I inserted and got nothing. thought doorbell was broke. Than someone posted what batteries not to get and why (Wish I knew b4 hand lol) but if u do have wrong battery that's okay too, someone posted what yo do to make it work. fold up aluminum foil and put on end of positive side. I tried it last night and it works, so happy :) good luck

[@candiceashlee]

Brandi Weston tried the foil it didn’t work for me

[@Mspula1967]

@@candiceashlee I'm sorry to hear that. I folded up 2 pieces thick enough like as if end was up like battery u need and put at end of battery with small round metal showing

[@jacquelineeaton7277]

Where can I find batteries and it did not come with the screw or other tools

[@rogerfeliciano5469]

Thanks for review can I make it record longer than 8 seconds when it detects someone

[@farhankhan-bo6ix]

yes go under settings and you can

[@cjcj2010]

What capacity SD will this take? Thanks in advance.

[@TheDeanosingh]

hi im getting issues with setting up the door bell. keeps asking me for passwords for no reason. any ides why this is? thanks Dom

[@farhankhan-bo6ix]

I would recommend reset the system on the bell and delete the existing camera from the app. After that, add the camera again. It should resolve this issue.

[@kisselleenpaulino3715]

Help! When I put the battery it doesn't make a sound or light at all.

[@mikeloveskimbo]

Just been given one as a gift, Thanks for the concise and clear instructions ;)

[@lcprod]

the app asks you to update the firmware. how do you update the firmware?

[@christophehollebeke]

Can this doorbell working without batteries when connect to a external power-adapter with the wires from my old bell? Or works the doorbell with the battery-power and the external adapter from the old bell is used for charging the batteries continue?

[@beepimajeep9787]

Christophe Hollebeke yes you can use the wires from your old bell !

[@christophehollebeke]

@@beepimajeep9787okay, thanks for the info.

[@shandaa8607]

Do you know the volts on your external ac/dc adapter? I bought a external 24v but I can't get it to direct power. It still wants to us batteries.

[@zakkirhussain1435]

Thanks for your video, this product can connect and monitor over the internet?

[@farhankhan-bo6ix]

Yes you can connect over the internet. The app can let you monitor on your phone, as long as you have internet anywhere in the world.

[@zakkirhussain1435]

@@farhankhan-bo6ix Thanks for your information,,,,,,,

[@gabrielromero5763]

Thanks man for shared de information

[@herrkalaiskop5366]

thx was seit ihr unbeholfen mit den batterien manumeter

[@nicolebrugnetti695]

I have the same product but my instructions told me to use the app (UBell) seems like same options but are you able to take a picture in the settings automatically when someone rings the bell or alerts the motion sensor? Since it doesn’t rewind very long, I’m unable to check sometimes within my 60 second time range to rewind.

[@francesrich1085]

I've just bought the ubell one. How did you charge your batteries? If had the device plugged in for most of the day now through the mini USB connection yet when I pull the charger out it just goes dead.

[@tknayak]

I have a question. If you stick the bell to the wall like this, anyone can come and just take the device, isn't it? How the device is secure then

[@leettajyarlot1444]

Excellent how to and I for mine to work until I tried to put the back plate on....the alarm went off....everytime. Now what ?

[@amadorandresquevedo2488]

Buenos días , no se escucha el audio en el móvil que se envía de equipo?

[@ClediaOgdenCledia]

Please help can it work without the USB plugged

[@AndreaMartinez-uz2zi]

Can you still receive notifications and see the camera if you’re not home?

[@tabletcasacasa5523]

not on mine

[@sonyaspivey5400]

how to install SD Card or do I really need it?

[@juliejones6269]

Hi how do I turn the volume up and get notifications

[@maurajohn9218]

Farhan thank you for a really helpful video helped me get my door bell up and running really quickly. Do you know if there is any way of reducing the sound of the actual bell ring as it is quite loud from outside?

[@farhankhan-bo6ix]

No brother, I dont think you can do that. If you lower the volume of the media on your phone. It should lower the volume the bell when it is ringing on your phone.

[@laurenpreece82]

This is what i was going to ask. It is so loud outside but i wouldnt hear it if i was in the house so its not needed, only notifys the person pressing it and everybody around outside. Great camera quality and great video thanks for sharing. A bargain price really. Just hope it notifies me properly when people come on to the driveway

[@ericadetifa7007]

Dude how do you share the use with family please ?

[@tobyamanda7010]

I don't know how to adjust the volume on my xsh cam

[@christiangyldenlvehansen5805]

Hi. thanks for the video. Do you know how many volts it uses when wired?

[@farhankhan-bo6ix]

I am guessing 12 volts.

[@christiangyldenlvehansen5805]

Tried didn’t work but thanks

[@amirxfilm5765]

Also, can you add multiple devices to connect to the doorbell??

[@farhankhan-bo6ix]

Devices? like security cameras. I never tried that.

[@foz1831]

Yes you can have more than 1 mobile phone connected

[@Jake-vd8os]

Steve Forrester Cheers Steve! You’ve answered question I wanted to know the answer to. 👍

[@farhankhan-bo6ix]

yes you can have multiple devices to connect. I have my home tablet and phone connected.

[@Frankdem99]

@@farhankhan-bo6ix So how do you connect the second device without going through the initial process again? (That would need a reset of the doorbell). There does not seem to have an option to scan the network for an existing doorbell. And the scan qr code never worked when I tried it. Thanks.

[@dwangui76]

What batteries go in there? It looks like it needs longer batteries than normal AA

[@tabletcasacasa5523]

18650

[@davidbonilla9194]

I have one of these but I have not been able to buy the batteries, does someone still know where I can buy them ??? I know the video is old but I need to know if someone can answer my question and if they have any links I would appreciate it

[@njtexit8]

18650 batteries are all over eBay. However, these batteries are suppose to be rechargeable. Chargers are also sold on eBay and Amazon.

[@S.C248]

Do you have to use batteries for it to work ?

[@richarddenisepineault6387]

I have 3 of these and I hooked up one on my existing wires and it seams to work ok but I am not getting any notices. I have made sure my XHS notification is on. Whats wrong

[@johnkelly596]

Just like mine. It is pure crap. Got mine started but then the camera does not work

[@husensalam8475]

The problem with this bell is when someone is ringing the bell or moving at the camera, the position, one brings you a message. It is necessary that when the bell rings, the sound comes to you and you know that someone and the door you talk to him

[@dewaynemesser9653]

Hey do u know how to set the time and date on this device??

[@Johanna8able]

I want to know that too .. I've been having mine for a few years , i just installed yesterday but cant fix the time and date .. Did you ever figured it out ?

[@amyrowe7285]

Is this waterproof? Where I need to put it it will get rained on. And we all know how much rain. We get in the uk!

[@pitpony2006]

Just bought this, will not connect! Any suggestions?

[@andycosenza8872]

Where do I find batteries for this doorbell.

[@Mybloominghealth]

AFTER CHARGING THE BATTERY IT WILL NO LONGER WORK OR POWER UP WITHOUT BEING PLUGGED IN. HOW DO I FIX THIS?

[@nancyking2428]

Can I set up two phones to received door bell pics, I have one done already and was successful.

[@JosephLorentzen]

You must load the software in the second phone and have the first phone show the Q code.

[@karol733]

Excuse me, this can be connected with cellular wi fi network??

[@farhankhan-bo6ix]

yes

[@sandraaldred9185]

Where do you get buzzer from

[@Lion-km3un]

What is the cruise button used for?

[@andytart6500]

It wont let me select my WiFi. Do you know why this is?

[@samuelsolano2885]

Where can I find a batteries for the door bell.

[@julieboyd6962]

Still wont work. will work when plugged into usb but wont work and batteries are fully charged. What am i missing please?

[@jloespora]

Does it record without answering your phone?

[@cxluture6686]

I don’t know to buy ebay yesterday the delivery dident come

[@christopherd597]

When I connect my wifi I don’t see a video on it it’s just a black screen???

[@richardjacuk5210]

Can not my camera start working , after 2 years working camera I reset my camera put new password connecting camera to WiFi but say pass is not strong (I have 12 different nr, letters small and large. The same problem happend to my 2 cameras on this app.

[@amirxfilm5765]

Hi, can I use my old chime by just replacing my old bell.

[@farhankhan-bo6ix]

This one does not work with your old bell. When you connect the old bell wires to this, it will only use that to charge the batteries. It will not ring the bell.

[@farhankhan-bo6ix]

no I don't think you can do that.

[@Crottecrotte-uw5bn]

How do I remove the battery cover?

[@bernardocallaghan8835]

Where do you get batteries from and how much are they

[@margueritecurtis2168]

Does anyone know how to stop the alarm if it goes off by accident?