@@johnventura764 I bought 1 cpu model too low your right :(

@sts4ya Hi there and tyvm. I took all the small cooling fans out and blew them out and cleaned the fins well. Reposted the gpu and cpu hestsinks. See if you can update the cbipset drivers from Dell. Might help. You could also try and download a fan speed program. If I rem the name of one I'm going to try on my system I'll reply here. You will also need a temp monitoring program just to make sure you cpu or gpu isn't truly running hot. But some fan software has that built in too. First see how it runs after the repaste and let me know.

@@ScottMGordon Hi there. Yup, I was certainly pleased with all the features of it and price. When it was on sale.

@itstheMR Heh good point about the front. I don't rem the 1k fan less case of theirs. Probably because I'd never have taken 1 look at it because of the crazy price.

@@RememberThisTech Zalman TNN 500AF. The whole case is a heatsink!

@itstheMR that's insane. Wonder if it took off or who bought it

@@laurencejohnson4106 Yep. I put the new Am5 system in it. Looks sweet !

@@RememberThisTech I did wonder what the build would be.

@alreygella6302 Between 150 to 180 watts under full load. Temps well my case has great ventilation and runs 55 to 67c depends on how long it's run and stressed. All depends.

Hi there. Both of those CPUs are listed as compatible with this motherboard. Might need a bios update. I'm running a 8600g and have no issues. putting it through some game tests with a Arc B580 right now.

Hi there. Good info! Glad to hear it's working well on your 9100. It's a realy good card and hope it serves you well for a long time. Thanks for watching and commenting 🙂

@dan7549 Hi there. The manual is decent. Most cables should be labeled too and some only fit one way of course. When in doubt don't force it in look it upnon YT and double check. I think I did a first pc build tutorial check it out. I'm sure you will do great! Feel free to ask if you have questions. Let me know how you make out.

@@RememberThisTech Thanks a lot I will check your other videos and will keep in touch.

@JohnsonYeung-e6v Good point. I'll revisit it soon and test in it's other functionality:)

@@vladyslavbrataniuk1324 8gb of ram allocated from bios. As noted in the video. Thanks

@0357predator Hi. Mine shipped with f30 and I updated it soon as I booted it up

​@@RememberThisTech And yours is also Rev1.1?

@0357predator Yup mines 1.1 just checked.

@@dinobiviles 41000 low end to 47000 rupees high estimate 480 usd to 550usd

@RememberThisTech thanks brother

@dinobiviles I just posted a new video with 1080p game benchmarks in case you wanted to take a look kzbin.info/www/bejne/jHKniGWmf91gd9k

@dinobiviles Between 480 and 550 depending on which power supply and case you go with. Also if you can catch some of the parts on sale like I did more around 525. But that's with the 750w gold fully modular power supply.

Hi there. Yeah It's pretty surprising it did so well. Granted it's at 1080p with mixed settings but all the same pretty nice!

@JoshAustin-z7v Hi there. Id say thats a strong cpu for sure. Things to note though..With a TDP of 140 W, the Core i7-5960X consumes a lot of power, so good cooling is definitely needed. Intel's processor supports DDR4 memory with a quad-channel interface.

@ that means you can use all four slots on the motherboard, right?

@@JoshAustin-z7v Technically it should But I think that CPU is limited to ddr4 2133mhz if I'm not mistaken.

@@RememberThisTech i’m looking for ram right now. That’s the last piece of my puzzle so far. What would you recommend for this CPU and motherboard combination? Thank you so much for your help!

@JoshAustin-z7v Maybe try ebay and get some 2133mhz ecc used server ram?I think oli got 32gb for mine for $23 or 25 bucks. U could also grab some ddr4 16gb kit new from Amazon for 24 bucks

Should be able to take that cpu. Double check the mobo details page to be sure.

Both are still working. Granted I don't use them every day but I put one in a clients system and that was 8 months ago and the other one I still use for testing .

@matooie Hi there. Oh wow I've never heard about that happening. I've not modded this board in anyway. I just keep good airflow through the case. Granted I don't keep it running 24/7 or under constant load either. Let me know what you do. Ty

​@@RememberThisTech thanks for the reply I'm still in the process of getting the parts almost done just need the psu case and CPU cooler but just asking as a precaution

​@@RememberThisTech just have a question does the motherboard have built in wifi or do I need to get a sperate card because I don't have Ethernet (cable is not long enough to reach my PC in my room)

@@matooie As far as I know for the cheap price point of this motherboard there's no wifi. You would need to get a wifi card.

Oh ok thanks for the answer because I don't know if the house I'm in is going to have a router to use ethernet (wifi network but it's in the lounge area)

Thanks. Took forever and down to the last minute in Friday to finish this video. It's not as polished as I'd like but I have a ft job that I still work haha. Back to retro stuff for a while. ..

Hey there. Did you have all the parts in your box or did you find them all?

@@RememberThisTechi had Them all now im just waiting to buy cpu, case and ram😊

@RealProjectYT Awesome good to hear!

@@RememberThisTechi also bought the Sparkle Arc B580 Titan Luna OC - 12GB.

@@WillAlonzoF1 :)

@ytqink2353 Hi there! The case you bought should have had all those screws in it... this might help amzn.to/40iFVKQ It's a kit with all types of case and motherboards screws. Let me know how you make out with this.

@ thank you I really appreciate the help

@shadarlogoth4288 Hi. I will try and find out. I don't realy want to take the heatsink off yet though as it's not that old and runs cool still.

Hi there. Good question. Only thing I can imagine is I used a newer b550 motherboard with a Ryzen 5700x 8 core 16 t cpu. Also the 6700 is a good cpu but comparing it to the 5700x, it has way less cache: L1: 256KB, L2: 1.0MB, L3: 8MB vs 5700x L1: 512KB, L2: 4.0MB, L3: 32MB. More cores, Much faster single-core speed., CPU seems to be holding it back without knowing your utilization %.

@josephdias5859 Good info thanks! I'll see if I can fit it in the production schedule.

@@RememberThisTech cool thanks for considering it i build alot of lower end computers for super cheap and i found you can milk alot out of an old cpu using vulkan swapchains and a full debloat of graphics drivers, spectre and meltdown mitigations, and full windows debloat sometimes its so substantial it can be the difference from playing from 30 fps in some titles to 60fps ive even managed to get 30fps in fallen order on q9550 by optimizing everything to benefit the older architecture as much as possible

@Ivan-lp5mm No, not this mobo only ddr4. Some versions of this might, though, you'll have to read the support specs on different mobos.

​@@RememberThisTech Thank You

If your into Console gaming perhaps.

Hi there, and welcome to the channel. That's awesome! Did u use the same mobo and cpu, then? I'm going to try and get a game benchmark video out this week for this system. Thanks for watching and commenting. I appreciate it.

​@@RememberThisTech Hey sorry didn't see this msg. I used the same motherboard but put in a 7800x3d!

@vampireknightvk oh wow nice! Surprised you could get one of those as they were in short supply. Grats

Hi I'm not sure, I would advise to read the two tech descriptions on the non and gpio versions and double check.

All good points and ty. I had the laptop connected to ethernet as far as I remember. If you look at 4:20 in the video you can see the ethernet cable in the port on the left side of the laptop. I've got a bunch of wifi cards perhaps I'll see if I can find one to upgrade it. Thanks again

Thanks Laurence I appreciate it. I'll get back to retro stuff after the next video or so!

@ShaquanVirse Hi, and welcome to the channel! Hehe, I'm glad it had all three m.2 slots, and you were able to get your drives installed ;) What Cpu did you use in this notherboard? Thanks for watching.

@@RememberThisTech I'm on a budget so I got the Ryzen 5 7600X. I accidentally ordered a Ryzen 5 5600X also so I'll use that for a cheaper build I can use for something else later on.

@ShaquanVirse Ahh the 7600x is a decent cpu too! Not bad!

@InvictusManeo. Hi there. For rough comparison sake the Ryzen 8600g is close to an i5-12500 . No the ryzen 8600g 760m igpu will perform much better. The ryzen should run cooler with less wattage then the 9900k and a 1070 gpu will give you a bit better fps.. but consider another point, that cpu is on a dead platform. This AM5 socket has a lot of years to go. Plus you could drop in a video card later or a Ryzen 9000 cpu. It's got some future proofing and new tech stuff, plus upgradable. Don't get me wrong I rocked an i9 9900k for years but now I'm at a 13700k. I'm not a fan boy or blue or red. But AMD cpus have been doing awesome lately. Let me know what you decide. Thanks for commenting and watching.

@@RememberThisTech For the performance gain vs cost here in the UK, I cannot decide if it is worth it from what I am currently using. I am currently running an i5 9600K OC 4.7ghz, GTX 1070 - 8gb, 32gb DDR4 3600, Z370-A-PRO Mobo, 2TB SSD space. Currently playing STALKER 2 CHORNOBYL, and settings at 1920x1080p, Textures = Epic, other settings High - Medium and I am using TSR @ 85% FSR Enabled. FPS @ 60 - 80 with occassional drops to 45 at least but only in bases.

@InvictusManeo. I mean that's a good setup you have currently so perhaps invest that money into a new gpu instead? Maybe an Intel B580 12gb card. The reviews are pretty nice.

That's very true for a lot of the bigger cheaper brands. But some of the newer drives like this or my new Samsung 990 Evo plus has enough HMB cache that the transfer speeds don't drop like a stone anymore due to the fact that they can recover filled cache somehow now.

Heh yeah it makes no sense how one rx580 from the same manufacturer can be so different as far as the outputs etc. Unless they refurbish the pcb or 580 chips and some are only capable of certain outputs, clock speeds etc. My guess. Shrug. But yea 2 video outs is fine for most people for sure. Hope you card works OK for you!

@RememberThisTech Thanks. Hopefully it does work out as my RX 5600XT is in the process of dying to the point that even underclocking and undervolting it from 180w down to 90w is not making it stable. There's a good chance that card was abused (mined on) somewhere in China before it got to me since I got it used and it was very dirty and acts up from time to time. Its bad enough now that of 4 display outs only 1 works now and it randomly dies within 30mins to 3hrs since just before Christmas. With my PC down I'm really hoping the RX 580 would turn up fine in 2 weeks time. I was aiming for used GPUs at first then remembered that my bad luck with my past 2 used GPUs so I gone down the "new" route. Between a new RX 550 and the RX 580 I got it was like $6 so it just made sense to get the 580 for extra performance and vram if I end up needing it. I'll probably undervolt the 580 anyway since I don't game to drop power usage and keep it cool and hopefully last longer.

@abunk8691 Oh wow sorry to hear about your gpu issues :( Did you take it apart and clean the heatsink and fans yet? Or rethermal paste it? Yeah the Soyo gpus at least the rx580s I've gotten have appeared brand new so hopefully it should be good for you. Here's to getting it soon !

@@RememberThisTech Hey its been a few days and I got good news. I got the Soyo RX 580 and in my 8~9 hrs of testing last night its been fine. Its an all white one with a similar heatsink to the second one you shown in the video, but a different plastic shroud and white backplate. I was expecting 2 display outs per the pictures but got a unit with 4 ports (1 HDMI & 3 DP). There were some oddities: - fan speed is just showing 0 rpm and not controllable on either Adrenaline or MSI Afterburner - AMD Radeon Adrenaline not showing any clock speed or voltage adjustment options - MSI Afterburner also can't see the voltages so I couldn't test undervolting - under Linux using CoreCtrl the clock speed and voltage adjustments are available which puzzles me - of the 4 display out ports, the right most DP is limited to 1920x1200 much like a DVI port (I suspect there's a DVI to DP converter internally) I'll be keeping an eye on the RX 580 as I got 30 days to file for a return if something is wrong, but I hope it stays all good. It passed my mix of tests such as Furmark, Tekken 8, and a Vulkan AI upscaler.

@abunk8691 Hi there. Oh wow that's a lot of good info ty. Wonder why the info wasn't availible in windows but was in lknux.. Glad you got one with more outputs but strange why one dp would only display up to a certain res.. Cable issue or adapter?

@@itstheMR That's a super nice read and write!!

My New Samsung 990 evo Plus 4tb gets 6199 read 5841 write. Not performance optimized yet. My P41 platinum SK Hynix 2tb gets 7123 read and 6899 write.

@@RememberThisTech Wow that Hynix is fire! Leave it to Hynix to take the lead.

@@RohanMalhotra I guess all I did was apply some pressure to the base of it and hold it while I twisted and pulled the nvme ssd tab up and out. Gently twist as you pull. Seems to work for me. Give it a shot and let me know if it works.

@@RememberThisTech Perfect, that worked for me thanks a lot. As much I love tool less designs, I wish they would just use the same screw as they do for the slot with the heatsink.

@RohanMalhotra Awesome glad that worked! Idk why more mobos don't use the little turn clamp clip like some Asus boards have or just the screw lol.

I cut the video scenes at different places making it advance to a new more action packed scene. But it made it seem as if it's choppy. The video playback is good just I didn't do a good job at editing. :(