As far as your door problems back in the days we would cut off a piece of garden hose and heat it up in the microwave but $10 is cheap enough
@user-kz4dg5px6lКүн бұрын
that paint job is horrible
@stevenc5227Күн бұрын
Orange peel as paint is too thick, should have thinned it slightly, would have made a difference.
@the1andonly2 күн бұрын
Good video. I watched because I'm going to paint my 1989 Chevy truck (work truck) like that. What I'm still wondering is the mixture of the paint. There is a hardener available that would make this paint get a lot harder faster. What I'm not sure of is if I should use that with the roller. There is also some stuff that will make the paint flow to get more even. How important is it for the work truck?? Probably not at all, but I still like it to look good. Did an older Buick with Rustoleum once and even with the orange peel I was happy.
@electricbloke3 күн бұрын
I didn't realise that Stevie Wonder was a body guy!?
@albertsilva89523 күн бұрын
Not over reacting,they got lazy
@majorcheese23453 күн бұрын
Please make more videos about the Titan
@lucaspancipanci24623 күн бұрын
Shocked
@2H25214 күн бұрын
Nice job, but a coupe & not a fastback, what do you really expect?
@donmcflyshorts4 күн бұрын
this video makes me appreciate my 99' tahoe 10x more. im the 3rd owner and the truck was garage kept all its life. it's in great condition. thank you for the upload! the transformation is amazing.
@david051115 күн бұрын
Yeah you scored. I inherited mine (1980) from my Dad, and it had been sitting in the garage for 25 years. Cosmetically, pretty good shape. But I’ve got $30k in it already, and a lot of that was just replacing a lot of stuff that was just toast underneath. Not to mention a top-end rebuild due to snapped head studs, a CIS rebuild because that was worn out, etc. The car has under 60k miles on it too. A running 911 for under $11k? Well done
@andrenj19705 күн бұрын
For 2.9k is crap, $400 maybe.
@luhmauryy5 күн бұрын
Deodorant on the belt helps the squeak
@farazsiddiqui66895 күн бұрын
Great job! Thanks for the advice. What kind of a compressor and air pressure did you use to get this done? TIA.
@Jeet_Kune_Do_And_Carate5 күн бұрын
How embarrassing is this engineering... A wide body care with only a 265/45/18 wheel... Wide body should have 345/30/19 Nitto Invo Tires!!! Just saying...
@Jeet_Kune_Do_And_Carate5 күн бұрын
Dude sitting in the front seat like its a toilet... Seen a many of these cars that I had to pass on because it always looked like somebody took a shit in the back & front seats... NOW I SEE WHY!!!
@wildwildcity69356 күн бұрын
They gave you the 300 dollar special and charged you an arm and a leg
@jieprelampago6 күн бұрын
Bro, silver with black accents would've looked amazing rather than that yellow stripe down the middle. Great low-budget build, all in all.
@jieprelampago6 күн бұрын
Bro, seeing James before Donut lol
@jaysonninocabagon30366 күн бұрын
Worth SAving the first gen Mustang
@michaelreuss47416 күн бұрын
Scary ! 😂
@alanburns94667 күн бұрын
Im pretty sure someone offered me candy as a kid in that same car.
@jeffmorris28448 күн бұрын
No no no dude you got screwed. Three grand I would have fixed all that and you would not have sags and runs nor would you have orange peal.
@noduh7368 күн бұрын
I'm having trouble with a lexus is 350 f sport not cheap or old
@davevailmba10 күн бұрын
Guys, I tried this 20 times with 3/8 allthread... and it's too small (kept allowing the vise-grips to unlock)... use 7/16 allthread!!! It works SO WELL!!! However, although the tool is VERY COOL, mine is still stuck! 😢
@vicwalter991810 күн бұрын
Where did you get that car Jack
@nancienewton801810 күн бұрын
Very impressed! We do lots of car restorations, going to definitely try this nice lil trick out
@Solid_Snack10 күн бұрын
That look soooo rice 🍚 😅 But live your dreams ✨️ 😌
@Leo-37810 күн бұрын
Es lo más mersa que he visto en mi vida/// It's the worst taste I've ever seen in my life.
@mendivil7110 күн бұрын
Time for an update on the truck.
@scalecustomworkz783711 күн бұрын
Work paid for should have been itemized on the initial work order and/or final bill. IF BW was paid for I'd being asking for at LEAST partial refund. A body place fill my 65 Mustang bumper bracket holes in the rear and what a piss off that was. The LR DOES however look not too shabby there Bud.
@scalecustomworkz783711 күн бұрын
You're a Good Soul Charlie Brown !
@user-ow4tp6bk6m13 күн бұрын
The Mexicans would've done it for $1000 and it would've been 10 times better.
@commygang454813 күн бұрын
thats a lie my scrapyard takes cars that still has fluid in it
@georgestrickland927813 күн бұрын
i have had 6 cars painted by maaco,only one bad job and that was just overspray,i had my buick gn painted there and was satisfied with the job,it also depends on the maaco location
@Dtoys66613 күн бұрын
So about 2 years ago i rebuilt my 04 rear diff 2 days ago my damn rear went again ready to junk this damn titan even tho i love it , really do have a love hate relationship going smfh , great vid
@ManiacalManiac15 күн бұрын
The place i went to qoted me 10k for my 96 1500 ram single cab. Thebwd and doors arethe only thingthat needed work and i was just goingto order new door shells from LMC. The guy tried selling me doors $800 a piece for junkyard doors her inthe midwest. I laughed and said i can get new shells for half that. I said the lower qaurters on the bed that were damaged,i wanted cut out and new panels welded in. He was hopong to fill the damage in with filler. I said this is a restoration job not an insurance claim. I want it done right. Then he asked about the door jambs and i said the doors have to come off for the new ones so it would be a good time to paint the jambs before yhe doors are reinstalled. I felt i wasnt going to get the finish i wanted. For the money it seemed he was takingshort cuts. Then be couldnt vive me a time frame stating he had other work to do, which i took as he wasnt going to do ot in a reasonable timeframe. Ive painted myself and done lots of body work so i know how much goes into a paint job and gettingthe body straight. Thankfully my truck is straight as new except for the rusted doors and the bed damage on the quarters. I waseven going to bring ir in wothout bumbers , mirrors and grill so they didnt have to do anything except start working. If im going to pay that much for that little of work ill spend 15k at a real shop that will do real work. Even at that a a factory level paint job with just two small panels to be cut out and welded in shouldnt cost more than 10k.
@jajaaba444715 күн бұрын
Nice Job young man !
@ManuelMercedes-vf1bc16 күн бұрын
Always do a great job
@andrewphillips894716 күн бұрын
First off, I commend you on tackling this project on your own. That said, this right here, is an accurate depiction of why things like this cost so much. Your comment "this is where skill and experience comes in" says it all. When you look at something like a header that costs $1000 for someone to build, this is why.
@mikehoke102817 күн бұрын
This company has the worst reviews and the worst reputation in the world! Stop going there people