Is there any way to change the root note and scale on the whole project ?
@UnitE80817 сағат бұрын
@@modulartheory no, unfortunately
@waterthroughyouropenhands5063Күн бұрын
I can not get my midi tracks to stop recording automatically once the measures are done.
@UnitE808Күн бұрын
@@waterthroughyouropenhands5063 it’s not designed to do that. If you want your recording to stop when the clip is done, set Clip follow to stop
@waterthroughyouropenhands506320 сағат бұрын
@@UnitE808How do I find that setting if you do not mind answering?
@UnitE80817 сағат бұрын
@@waterthroughyouropenhands5063 shift+Clip. Scroll to bottom and choose stop as play next
@moniker24162 күн бұрын
Hi! What if the tr8s is plugged into the MX1 and you want to unplug and have both devices plugged into separate USB ports? What would be the best way to sync everything?
@josemanueldiaz43834 күн бұрын
ey man, how you change de colors of buttons and the pad to this blue? by default its green
@chandlebarr24424 күн бұрын
Very nice thank you
@M27UNDERGROUND5 күн бұрын
that independent triggering is soo coool. been looking for a clock that has that, but not at the price of the multiclock
@macdaddybender6 күн бұрын
This is great. I used these instructions for V3.00. Thanks so much
@Digiphex8 күн бұрын
Have you figured out how to run track 1 into track 2 and have the two effects or "stack" effects that way?
@UnitE8088 күн бұрын
Yes. It’s a great way to add some layering. I’ll usually bounce that down to a looper track and then port it over to a drum pad.
@sergericem79119 күн бұрын
Thanks for the tip mate.
@baertnicola64409 күн бұрын
Thx ! Your videos are very helpfull !!
@pansman839 күн бұрын
the missing link to me... the editor clarified and visualized the few, but fundamentaL misconceptions I had handling the tr8-s.
@felipefs10612 күн бұрын
In case I had a 4 bar loop, could be possible to copy 1 bar completely(any from 1 to the 4th)?.
@UnitE80812 күн бұрын
You cannot copy just one measure or bar of a clip to paste elsewhere. You can copy the entire clip to a new slot then use first and last step to isolate the bar you want to have repeat.
@felipefs10612 күн бұрын
@@UnitE808 I'll give that a try, thanks. Btw, have you tried the fantom / fantom-0 series?, seems they're are a superpowered mc 707
@UnitE80810 күн бұрын
@@felipefs106 I have! They are on another level, as they are full blown workstations for studio work. The MC line are groove boxes made for live jamming.
@3ric90814 күн бұрын
Thank you ! You did better than Roland itself, thx i have my ansewer (just not about 1 and 2, no fluent english and you went quick on it). I can’t understand qhy it isn’t a simple Vst integrated in daws rather than thos 3!! windows. Also that it is so weired and not standard for managing : basic new|save buttons instrument as kits as patterns, all in a clear managing window, as dor bank and presets with all vst. Btw.. Thanks again
@bux7719 күн бұрын
So glad these are straight to the point. Great videos on the MC-707, thanks.
@Lo-fiSolutions19 күн бұрын
So does the 101 playthis way aswell?
@UnitE80818 күн бұрын
If you setup the tone in Zenology Pro or on the 707, the 101 will play it. You cannot, however, set up the velocity ranges on the 101.
@user-ee6hj6je6m22 күн бұрын
Hey Brian.. Chris from your last Friday class. Subscribed because I need to back track all the material you went over in the class. It was informative and since I wasn't able to use the Roland during class, I knew there would be a point where it got over my head.. Allot to consume..🤔
@UnitE80822 күн бұрын
I have the review video coming to you this evening
@ashleyhaak348726 күн бұрын
thanks for the great video! is it possible to copy a variation in the editor?
@ah603926 күн бұрын
hi mate , I'm trying to connect my tr8s to my Mac mini 10.15.4 Catalina but my computer can't see it , is there any tips you can give me to get it right? thanks
@lwpweb27 күн бұрын
how can i import a sample folder f.e. a sample pack at once... I get import error when trying to import src folder. (made a ticket in roland, but no answer until now)
@UnitE80827 күн бұрын
In the latest firmware, there’s a bug that does not allow you to import entire folders. I highly suggest not using this method anyway as sample management in the machine is poor at best.
@lwpweb26 күн бұрын
@@UnitE808 thanks for your information.
@lwpweb26 күн бұрын
@@UnitE808 I just sold it to look for a DT2
@reardondearborn27 күн бұрын
Cool tutorial. Does the lfo work on every instrument? I tried setting it up with a closed hat but couldn't hear any change. Thanks. Mind you, I didn't do that ctrl+instrument knob lfo depth that you did.
@UnitE80827 күн бұрын
It works on every instrument. You will need to either assign the knob or when you go into the instrument edit screen set the LFO depth there.
@diegosk8ification28 күн бұрын
So if u transfer direct to tr8s u dont need the external memory?
@UnitE80828 күн бұрын
No. You will need an sd card. The only time I found it wasn’t necessary is when using the microsite. From there, it would transfer direct to machine.
@_-Marcel-_Ай бұрын
Thank you!! Great features!
@cjk-28-JockeKАй бұрын
Huge thanks for your this tutorial ! All the flipping in&out of card and USB cable in Roland's instruction got me confused ...
@_-Marcel-_Ай бұрын
Absolutely needed this!! Thank you!! 🙏🏻
@HardcoreOreiderАй бұрын
Best Tutorials on KZbin!
@user-ee6hj6je6mАй бұрын
YEP.. Got a 202 for my birthday a couple days ago.. Coming from old school Turntables and tons of vinyl, to this Roland.. Once I get it.. My neighbors are going to wonder how is this 67 year old guy making the dogs bark..😛
@UnitE808Ай бұрын
There are free classes on the 202. Head to Roland cloud academy and sign up for free, live classes taught by me.
@user-ee6hj6je6mАй бұрын
@@UnitE808 Thank you brother.. see you on the 14th.
@mindexmusicАй бұрын
TR8s - Hawaii edition ;)
@UnitE808Ай бұрын
U kno dat!
@vladagordanic574Ай бұрын
Can you use reverb on external instrumet and how pls?
@UnitE808Ай бұрын
Yes! Hold shift and press KIT. Keep holding Shift and scroll the value knob until the top category line on the screen says Ext In. Let go of shift and scroll to reverb send. Delay send is the parameter right after. Press Enter on either of these and use value knob to adjust amount. Holding shift while adjusting amount will cause the value to change in bigger increments.
@vladagordanic574Ай бұрын
@@UnitE808 Thank you very much Sir 🙏
@stevenswapp4768Ай бұрын
Uuuuhhhhmmm...
@UnitE808Ай бұрын
Care to elaborate?
@ASDPOWERАй бұрын
Love your videos super helpful!!!!
@Quais32Ай бұрын
Thank you so much for making this. This thing is a bit esoteric at first but is starting to open up.
@UnitE808Ай бұрын
My pleasure! Check out Roland Cloud Academy to sign up for free, live classes on the 707
@Quais32Ай бұрын
@@UnitE808 wonderful, I just signed up!
@lgholland3417Ай бұрын
using loops to make patterns please
@UnitE808Ай бұрын
It’s not advisable to do, but I can make a video on it.
@renzokukengame1684Ай бұрын
I enjoyed 💪💪
@renzokukengame1684Ай бұрын
How this work?? If i conect mc707 to my atruria keystep pro that means that i can control mc707 and 3 more synth with arturia and 2 more synth with mc 707?? Is this right?? Tnx
@renzokukengame1684Ай бұрын
Or in this case only 4 synth while arturia is main controler
@UnitE808Ай бұрын
Yes
@spot1119Ай бұрын
So funny to see a mc101 in this kinda setup. Most the time when people have rack gear le that, I’ve mostly seen they also have some big expensive synths or rack mount synths. Cool setup for sure.
@UnitE808Ай бұрын
lol! I like to experiment with various compact configurations. I use 1 Track full of sequences grouped in quadrants on the pads in CLIP mode. Each quadrant is assigned to a voice in the eurorack. The Hermod acts as a liaison between the 101 midi output and the modular CV input. I play a sequence from the 101 while recording on the Hermod, and it then captures it as a loop and i stop the 101 clip right in time. It’s a really enjoyable way to play modular live.
@skeomeАй бұрын
I saw a video where someone touched their Tune knob, then controlled the parameters with the Value knob for more precision. However, when I try to do this, the screen just goes back to the main screen as soon as I touch Value. I have 2.0, but i think the video was 1.5. Was this feature removed, or is it something in my settings (factory other than display for power saving and initial pattern) ?
@UnitE808Ай бұрын
They also were most likely holding down a step. Holding a step allows you to set parameters on that step for the tune, decay, and control knobs. If you hold the step and slightly wiggle one of the knobs, it will jump to a signing of value of that parameter to that step. From there, you can use the value of to fine-tune, your adjustment.
@skeomeАй бұрын
@@UnitE808 Correct, I found that out after my comment and forgot to delete it. I'll keep it for reference if anybody else wants to know
@bobbyrohrАй бұрын
Thank you for your video. Very useful for me and many other MC-707 users.
@atomfaustАй бұрын
I love it! I'm glad to see you rocking it!
@lorenzofasanomusicАй бұрын
Hey unit-e ! Hope all iss well? Could you help me out? On my TR8-S every time it goes back to scene “A” it triggers the master reverb alone, even with the reverb level set to Zero, also happens everytime I change kits, i have to move the reverb level knob to reset to zero, even if its already on zero..
@UnitE808Ай бұрын
Sounds like motion record has set a value to step 1 on Variation A. Hold the ON button for Motion Rec and turn the Reverb level knob to Zero
@grazstarrАй бұрын
scatter 10 is so badly made. it pauses the music and makes it go out of sync. on the tr8 it was perfect and a great trick while playing live
@mb102Ай бұрын
Bro I said it when I subscribe to this channel dang near at the start thank you for simple clear info. I need to wrap my head around the file swapping to make it fast for me....now if only you could make mv8800 seem as simple LOL...paired with a VS2480😂 I'm getting there!!!!....so I'll say this and ask for any feed back...I wanna send the 6 aux to the VS to send back into EXTin of tr8s..what's simple way to individuals fx of any or all 6 them have 6ch bus fx so ad it goes back into unit it will be insertFXd and/or bus FXd or duck one or both while live play....I mostly live play and just record/sample myself....still a novice with lots of thoughts not enough practical knowledge to do it fast .....keeping thoughts together while menu dive is tuff
@UnitE808Ай бұрын
Thank you for the kind words! Let me see if I can understand what you want and help. You are sending 6 assign outs to individual tracks on the VS and then back into the 8S ext in from the Master Out, or Aux A or B on the VS? If this is correct, then what is the purpose of the fx on the VS? EQ? Compression/limiting? Performance fx? It seems pretty straightforward as far as connection and routing. Only real issue is that you lose reverb and delay from the 8S on individual instruments.
@miekwavesoundlabАй бұрын
Is it only 8 scenes, not 16 scenes like on RM1x? I ask because I usually make 4-8 1 bar fill patterns and the first 8 are main sections / choruses / verses etc
@UnitE808Ай бұрын
There are 128 scenes. Either 8 banks of 16 scenes per bank, or 16 banks and 8 scenes per bank. It all depends on the scene call type in your system settings.
@mikepatternbeatsАй бұрын
Was looking exactly for this! Thank you so much for this great tutorial!
@chriscopeman8820Ай бұрын
Where in the process do I find out what my key is?
@UnitE808Ай бұрын
You have to set the key and scale of your project in the project settings. This is something you decide when creating your song.
@chriscopeman8820Ай бұрын
@@UnitE808 I meant the Roland SoundCloud key used with my sound downloads.
@UnitE808Ай бұрын
@@chriscopeman8820 Ah, I gotcha now. Only after loading the clip will you be able to tell. Shift and Clip will get you to clip edit. One of the tabs is Key.
@FfanitTechАй бұрын
Great video thanks Unit: E
@e11world2 ай бұрын
I still love mine and just noticed I can do stems (thought it was an extra addon to buy at first).
@RicardoHernandez-uj3lw2 ай бұрын
Is that possible too with Logic Pro or Reason Mr. unit e ?