be careful with that overdraw, it totally scares the hell out of me

How many people started making bows because of Nick 👇

Delivering in Croatia?

Veeeery very nice!!!! My daughters bow is in a risk zone for paintage!

Had to try this. Used the fiberglass rods I have here. They are 3/8 so I was only able to put 3 in. A 48 inch, 36 inch and a 24 inch and got a 60 lb bow at 28 inches, This was so much fun. Thanks so much.

Twelve years down, eight to go 😅

You are a trip! Professor gadget on steroids. Thank you!

Going to trydoing this. Only thing is I have 3/8 fiberglass rod here for electric fenece. Know that 3 fit in a 3/4 inch pipe.And just checked, 5 fit in a 1 inch pipe.

nice finish! i know this is a pretty long ago post but thought i'd try and ask a couple questions..is that shoe "polish" or shoe "dye"...the applicator bottle looks like kiwi dye but i see there is also "instant shine" polish with the same type applicator... also, how long is the dry time? with low heat blow dryer vs without heat at room temp? again, really nice finish.

That's actually 1/2 rebar I think

very nice job my have a go at making it you have a good talant.

What is the size of the pipe is a pn16 pvc pipe fi50 3.7mm good

14:05 Another glaring problem. If the catholics have decided that the mystery of the Eucharist, which is (normally) necessary to partake of for salvation, is to not be *given* to Children until they are at the age of reason, then with this same line of logic, shouldn't their baptism also be held back after the age of reason? After all, baptism is also the normative form necessary for salvation, yet children are baptised without that personal "devatio" which Aquinas mentions is necessary (supposedly for a sacrament to be efficatious, as with anointing of the Sick according to him). So if it is meet for children to be denied the Sacred Gifts on the grounds of "non Devatio" (no devotion/reason), then isn't it also sufficent to deny them baptism until they are at an age for reason? No wonder why the Baptists, evangelicals and other Low-Liturgical types hold on to credobaptism so firecely.

Man Nick, I've been following you since you were (I think) a kid still lol!

Thanks bud ....I had a similar bow but not as good...will upgrade to this...regards from South Africa

The real light saber

Good stuff. Clamps can be your friends.

Does anyone know how to determine the key of the flute based on length? Let's say I want one that is in the key of C

Thought I would make a pvc bow and nice to see you are still making videos. I was squinting watching you pull on that bow in the shop. Damn!

Isso é sim é bom demais fazer umas coisas sem precisar comprar acampar na floresta

How do you stop the string from unraveling?

Nice job!!

I enjoyed the vid thanks; how big are the holes in the flute?

I just came back to your videos after 5+ years. Im glad your still artand still making content!!

Gonna get the stuff to build this tomorrow. I tried the original version today and had it shatter where the nocks were cut when I dropped the pipe on concrete. This nock design looks much more sturdy. I'm thinking for the handle I'll put it just below center so that the arrow is centered on the bow when I draw. I think I'm also gonna wrap the bow in duct tape before painting to contain any shards in case of shattering per your video on containing pvc shards.

Super Great!

Gonna build one of these this afternoon. If it goes well I might make some more for Christmas presents.

This does work fairly well.Have blow gun made from cold roll steel and bored and polished at 60 caliber.Have to make everything for it.Thanks.

Welcome back, Dude!! 😃

Mate, I'm from Australia and I love your stuff. I made a pvc bow with my nephew years ago. He's now a grown man. Those days with him where precious. I'm looking forward to making a flute next. Good on ya mate. You're a top bloke 👍

I never get tired of watching Nick make things.

Would love to build that but in my shitty country its not even possible to get a 2 meter long pvc pipe. i would pay money to have a walmarkt close to me. german hardware stores are just trash

سلام نیک میشه مشخصات لوله و بگی و جنس لوله از چه موادی هست .مرسی

🐺 Just when I think I've seen everything someone comes up with something new son my hat off to you. I could just see the look on my hunting buddies face if I showed up to my hunting lease with a bow like that. Son you'll fit wright in with us rednecks lol I reckon I'm going to subscribe and hit the notification bell because I truly don't want to miss any of your videos I can't wait to see what the heck you going to come up with next. Great video thanks for sharing I think anyway if nothing else thanks for the good laughs I got out of your video I reckon I needed that. Stay safe and God bless brother. 🇨🇱🦅

Do you have a template that is true to size?

Nick, watching all your pvc bow making videos for a takedown bow that I want to make. I am 6'3" and have a 33 1/3" draw. I am wanting to make a 70lb bow for hunting purposes, can you advise on what steps to take from here?

How much would you charge for a dozen of those

Awesome....Bookmarked...

If this bow was four inches longer at each end you could flatten it out to make siyahs for it.

Thank you for this. Fun content.

I followed your process across the vids and made my daughter a beauiful bow for her Halloween costume as an Elf. An old poster tube painted brown along with some wooden dowels from HD and some goose feathers and a hot glue gun. Ran an old brown leather belt through the length of it and taped some black gorilla tape around it using pinking shears (to give it a ragged edge) and a gold enamel pen to write in Elvish ! I made a really good approximation of what you showed us. She was overjoyed and it all cost less than $30. (Just a plastic elven knife was $15 in the store.) Thanks belately for the show and build and tell :)

Hey buddy just wanted to say thanks for an awesome video it's done really well and explained perfectly 👍

Nick you’re a legend man, love the channel!

Time to start the weights.

Every now and then I call back in to see what you’ve posted and every time you never fail to impress been watching since 2014

0:02 do you have an tutorial of the little crossbow?

Is this too heavy duty for US LARPS?

Nice!

Somebody was letting shots in the beginning.

Thats absolutely gorgeous