Пікірлер
@javiervazquezz 36 минут бұрын
That’s thiccc What pressure washer are you running?
@FineDetailingAZ 14 минут бұрын
@@javiervazquezz giraffe tools wall mount. 1.6gpm and 1.25 orafice
@colinmilne4634 Сағат бұрын
Hello from Scotland! Nice to see Bilt-Hamber products being appreciated Stateside. They are nice effective products and usually cheap here in the UK. This is Touch-On instructions from the BH website - Foam Cannon or Spray work equally well, bucket not so much. Pressure washer: Add 30ml into washer or lance reservoir, top up to 300ml with clean cool water. Shake well and apply under pressure to entire vehicle. Immediately rinse using pressure washer. Dry vehicle with a microfibre cloth or similar. Alternatively, an air blower can be used. Bucket: Pour 30-60ml into a bucket then fill with 10 litres of warm water (preferably from a fast running tap), mix well. Apply using noodle wash mitt, sponge or similar. Rinse with clean water. Dry with a microfibre cloth or similar. Please note, this is not a high foaming bucket wash. Trigger spray: Add 30ml to trigger bottle and top up to 1 litre with (preferably demineralised/deionised) water. Shake well. Trigger apply liberally, panel by panel, then thoroughly rinse with pressure washer or hose. Dry with microfibre towel or air blower. Car must not be allowed to air dry as water spotting may occur.
@FineDetailingAZ Сағат бұрын
@@colinmilne4634 very helpful! I don’t think I checked the site just package. Would serve them well to add that. I think their products are amazing!
@cyclechris6591 Сағат бұрын
I’m really happy with gyeons glass towels, they are just a waffle but if you wash separate, they never lint. Coated glass can get grabby with some glass cleaners. I like traceless with the gyeon glass towels, layed on my reacher.
@FineDetailingAZ 38 минут бұрын
@@cyclechris6591 good call. It does get a little grabby with traceless. I’ll check out gyeon towels
@cyclechris6591 Сағат бұрын
Delipad? It’s my fav. I just use 4 and avoid any contamination, then machine wash later. They’re very durable, still look brand new.
@FineDetailingAZ 39 минут бұрын
@@cyclechris6591 yup! It’s the deli pad xl. With a pre wash and a two bucket I stick with one and usually okay. My car’s aren’t that dirty
@mustikkap Сағат бұрын
My favorite product is probably Surfexhd because it is so versatile, and I don't need so many different products. Here are some dilutions I use: 2% interior cleaning 5% seat/floormat cleaner with wet vac, interior cleaning if 2% is not enough 10% wheels, mildly dirty engine bays, and general use outside 25% tires, dirty engine bays, undercarriage, polishing pads, wax applicators, and degrading/removing waxes/sealants before waxing. Also by far the best grill cleaner I have ever found. Eats through grill grease like nothing. Neat for very heavy degreasing, really no need because 25% is usually enough. Another favorite product is Korrosol. It is the strongest and fastest iron remover that I have used. Autowheel is pretty much a milder version of Korrosol and something added to it. I really don't have use for Autowheel because for regular washes Surfex HD or car shampoo is a good enough wheel cleaner. Korrosol is used when there is iron deposits that can't be removed with regular washing. Iron remover's idea is that it shrinks particles, but it needs a few minutes to work. So really the towel is doing the decontamination and iron remover is just lube if you use diy detail's method. Rinseless or QD is much cheaper clay lube, so I don't see a point in why I would use iron remover as clay lube. It might help or not, but in my opinion it is just a waste of iron remover. I spray Korrosol sparingly after prewash and let it dwell for a few minutes before contact wash with regular shampoo. No rinsing in between Korrosol and shampoo, agitating helps to remove those iron particles. Touchon is also available in a 1L bottle if you are interested. At least in Europe.
@jbalinski 2 сағат бұрын
Great video boss. I liked the part with the Bilt Hamber.
@FineDetailingAZ 2 сағат бұрын
@@jbalinski haha thanks brother
@cyclechris6591 2 сағат бұрын
I would like to ask BH if the korrosol fallout remover is compatible with today’s synthetic clay towels. Korrosol is very good, but would like to know if it’s solvent free. I love traceless on my glass, but it’s so full of solvents that it’s flammable. Korrosol has been around for years, before synthetic clay was a thing.
@FineDetailingAZ 37 минут бұрын
@@cyclechris6591 I had another viewer mention he reached out to BH and they said the iron is solvent free and okay for clay towels. Traceless does have solvents but don’t know enough about glass cleaners I assume most do.
@JayTownsend1 4 сағат бұрын
We do have ADS over here in the uk, love amplify
@FineDetailingAZ 3 сағат бұрын
@@JayTownsend1 awesome! It’s my favorite product.
@brandonnixon7105 4 сағат бұрын
Only tried Touch-less and Atom-Mac. Atom-mac is mid, but the only product in its class so🤷. Applying before, waiting for it to completely dry, and then reapplying is better then applying at the end (brakes already flash rust by then for me). Touch-less is undefeated in my opinion. Outperforms Labo Primus at 1% PIR (not even close) as a prewash.
@FineDetailingAZ 4 сағат бұрын
@@brandonnixon7105 yeah maybe try a stronger mix on atom Mac they do say 2-5% and good call on before and after I’ll start doing that. I’d like to do a comparison between labo and bilt. Detailing dogma just did it and said BH was the worst so I’d like to do my own test
@eurospec905 4 сағат бұрын
Try Atom Mac at 10% - before and after wash. Labo Primus 2.0 is excellent and just as good as Touchless in my experience. It also much more versatile and can be used in bucket as a contact wash when needed
@FineDetailingAZ 3 сағат бұрын
@ agreed I have a gallon of primus 2.0 it’s excellent
@LSD04 4 сағат бұрын
You should be okay at 1-9 on the QD. You should also be able to get Touch-On in a 1L bottle
@FineDetailingAZ 4 сағат бұрын
@@LSD04 great call I missed that. Even cheaper in a one liter per wash. 1:9 wow I used it 1:2 maybe that’s why it was so slick!
@waterhose4130 5 сағат бұрын
My Marolex are just better than IK. the thumb lock is a much better design. and seems to be much less pumping to max it out. Get the foamer homie!
@FineDetailingAZ 4 сағат бұрын
@@waterhose4130 ohhh the foamer will be bought soon. Going to compare to the e foam 2 when it comes out
@waterhose4130 4 сағат бұрын
@@FineDetailingAZ E-Foam seems sweet... Marolex doesn't seem to care about competing with IK, they are more industrial oriented, and already make powered sprayers. Just not hand held.
@FineDetailingAZ 4 сағат бұрын
@ yeah I wish they would put a shchrader valve on it so we don’t have mod this like Keav did. The hand pumping is so easy though I don’t need it
@pigeonpoo1823 5 сағат бұрын
Thanks for this. Please can you do a video comparing the Marolex to my trusted IK Multi. Really interested to hear your thoughts. Autowheel: dilute up to 3 with water. Still good. Surfex. 10% pre spray wheels to get rid of brake dust. Rinse, then contact wash. Cleans grill pan of sausage fat better than anything. And degrease bike chains. Atom mac -spray before and after Korrosol - can be used with a clay towel. pete hamber emailed me and said 'contains no solvents other than water.' i use it this way. Touch-on - 1 sachet to 500ml bottle and use as cheap alternative to Gyeon Wetcoat. Keeps for ages with DI water Auto QD - 1:5 for gloss. 1:20 as cheap drying aid. Mix 1:5 with BSD (others may work) for great drying aid protection. Favourite? Errr Touch-less Need them to make a rinseless asap. Thanks again
@FineDetailingAZ 5 сағат бұрын
@@pigeonpoo1823 unreal! Thanks for all of this. Great to know on Korrosol and a clay towel. Auto QD is awesome. The website does say 1:20 “no rinse wash” for the QD. Was curious if anyone has tried that. Assuming that just means waterless wash not a rinseless wash. I can do a video comparing the two though I think there are a few out there already. I’ll do it when I get the IK e foamer though.
@FineDetailingAZ 5 сағат бұрын
@@pigeonpoo1823 also great to know on atom Mac I’ll start doing that. It’s so cheap too
@pigeonpoo1823 4 сағат бұрын
@@FineDetailingAZ thanks, I'll look into the marolex a bit more. Auto qd can be used as a waterless. I've done it for bird bombs as a test. It worked, but not as well as KC Green star and others. it's not a Rinseless as we know it. if it was, 1:20 is way off 256:1, so would be too expensive anyway. At 1:20 it is similar to Carpro Ech2o. I like both. Oh, and Surfex. 0.5% kitchen worktops, general cleaning, 5% bathroom. Thank me later!😅
@pigeonpoo1823 4 сағат бұрын
@@FineDetailingAZ the sooner (as in I mean immediately) you final rinse the wheel, spray some on.
@FineDetailingAZ 4 сағат бұрын
@ indeed. I’ll work that in moving forward
@zustroy 5 сағат бұрын
How do you use Atom Mac, after you complete the wash, is the final step of the wheel wash? Do you leave it on the rotors, no rinse?
@FineDetailingAZ 5 сағат бұрын
@@zustroy thanks for watching I typically do it as my last step in washing. I dilute mine to 5%. It is sprayed on the rotors and let it air dry. If it drips on the wheels that’s okay it’s a rust preventer so it won’t damage them. You can wipe it from the barrel if you like. One viewer said they spray it before the wash and after. I’ll try that next. I find just after my last rinse they haven’t flash rusted yet so that’s when I normally spray. And yes, no rinse.
@eurospec905 4 сағат бұрын
@@FineDetailingAZtry it at 10% (off label) but I have been using it this way for years with much better success. Some rotors are more prone to the rust blooming effect so I often do it before and after wash
@FineDetailingAZ 4 сағат бұрын
@@eurospec905 can try for sure it’s so cheap and lasts forever at 5% they suggest 2-5% which seems aggressive
@1stfrompuertorico568 5 сағат бұрын
Some of my favorites have been Korrosol, Surfex HD, Atom-Mac and Deox-C
@FineDetailingAZ 5 сағат бұрын
@@1stfrompuertorico568 good to know! How do you use surfex and what %?
@T-BoneTodd 5 сағат бұрын
I would be very cautious using Surfex HD , I seen paint start to peel with that product used! I would never use on paint! One thing it’s great at tho is engine cleaning! It’s a great degreaser!💯
@FineDetailingAZ 5 сағат бұрын
@ oh my word. No idea it was that strong haha. Maybe that’s why they say use neat in extreme circumstances. Noted!
@eurospec905 4 сағат бұрын
@@FineDetailingAZ 1:10 or 1:20 depending on the situation is super effective
@FineDetailingAZ 4 сағат бұрын
@@eurospec905 ok cool yeah I think they say 5-10%
@ChingyBlingy 5 сағат бұрын
Ryan you’re cracking me up “I wanted to do everything I needed to do a full wash” you then proceed to point out 9+ products lmao!!!
@FineDetailingAZ 4 сағат бұрын
@@ChingyBlingy hahaha. You of course don’t need all of this. I just wanted to try everything. You could get by with touchless and the shampoo if you wanted. The glass cleaner is awesome and so is QD because of the dilution.
@ChingyBlingy 4 сағат бұрын
@ I feel you! It made me laugh because I tend to be this way as well. Gimme one of each!!
@FineDetailingAZ 4 сағат бұрын
@ 100% gotta see the whole offering for sure
@functionaldoc5054 6 сағат бұрын
I love Traceless outside and Nitido from Labocometica for inside window cleaning. I use Atom Mac seems to work well . So 2% PIR with Touchless what foam cannon are you using and how much product and how much water ? h Ryan have you tried the purple metering tip of the Griots foam cannon with Touchless and how did it work ? I have 2 iK e FOAM Pro 12 and now see using that with Touchless is the economical way to use on your car . Great suggestion Ryan.
@drive2siva 6 сағат бұрын
Great video Ryan. You are a mind reader. I just ordered a list of BH products from Carzilla. I have been using Touchless/traceless/atom-mac. So ordered their iron remover/QD etc. I still don’t understand why this product line is not available anywhere in US. One trick I learned with Atom-Mac is that if you spray it before doing a regular wheel cleaning and after, it seemed to work best for me.
@FineDetailingAZ 4 сағат бұрын
@@drive2siva yes! Thanks someone else just said use before and after. Great idea. Thank you for watching!
@eurospec905 4 сағат бұрын
Obsessed Garage will be the North American distributor for Bilt Hamber and will be bringing in the line. Then wholesale distribute to places like The Rag Company, Car Supplies Warehouse etc. Problem is it’s taking a long time, so most are just sourcing from Carzilla
@FineDetailingAZ 4 сағат бұрын
@@eurospec905 yup, excited for OG to pick this up. Mainly curious to see Matt’s thoughts on the rest of the line but for me…it’s A+
@Bruces-Garage 6 сағат бұрын
Piss those birds off and they are going to get you back. Be prepared for bird bombs on the car 😂
@Bill-Dalton 6 сағат бұрын
Bilt Hamber knows.
@FineDetailingAZ 6 сағат бұрын
@@Bill-Dalton they know all,Bill.
@adrianmoore3118 6 сағат бұрын
Yeah BH are great products. If you want another great British product try garage therapy they are superb, there wheel shampoo is the best I've tried and there car shampoo and decon shampoo is amazing. Also there CSS and quick detailer are top quality check them out bro.
@BrillianceAutoSpa 7 сағат бұрын
I need to test Trace-less again. The thing i dont like about it that i noticed is that i would get some rainbowing with it that was hard to get rid of. I also love the buvvle gum smell of it. Bar none, for me, the best glass cleaner is Detail Co. It's too good. Zero streaks and the cleaning power is top notch.
@jfarm_1311 7 сағат бұрын
Seems like a solid lineup
@FineDetailingAZ 7 сағат бұрын
@@jfarm_1311 I was impressed for sure
@markhorn2830 7 сағат бұрын
I’ve been holding off on the Marolex, but I literally paused your video and ordered one of the 2000!
@FineDetailingAZ 7 сағат бұрын
@@markhorn2830 best choice you’ll make all day. Seriously, you don’t even have to pump it all the way for it to last a while. Ik runs out of juice in 5 seconds.
@markhorn2830 7 сағат бұрын
@@FineDetailingAZ what bucket dolly are you using?
@FineDetailingAZ 7 сағат бұрын
@ grit guard sir
@YanniObkirk 8 сағат бұрын
Think about why you use a different soap for the foam cannon and for the contact wash. Contact wash needs lubrication for the wash media. The foam soap needs to clean without contact. There’s no one product that will be optimal for each type of cleaning.
@FineDetailingAZ 8 сағат бұрын
@@YanniObkirk thanks for watching. Agreed a pre wash is ideal in the cannon for a no touch start then moving into contact wash. I do like to foam on my PhN soap and have some in the bucket. Just my process no right or wrong way to do it.
@YanniObkirk 8 сағат бұрын
@@FineDetailingAZthat makes sense and nothing wrong with it. Two soaps.
@FineDetailingAZ 8 сағат бұрын
@@YanniObkirk for sure!
@TheHitmann069 8 сағат бұрын
Nearly all my regular detailing products are Bilt Hamber. Performance, value for money and economy, hands down cannot be beaten. Great video. Thanks for sharing. Best wishes from here in Blighty 👌🏻💪🏼
@FineDetailingAZ 8 сағат бұрын
@@TheHitmann069 thanks for the support! Agreed they are awesome products and widely missed by the US consumer. Don’t forget to subscribe if you didn’t my friend.
@TheHitmann069 8 сағат бұрын
@@FineDetailingAZbeen subscribed for a while now. Really enjoy the channel. 💪🏼
@FineDetailingAZ 7 сағат бұрын
@ thanks for your support!
@BryanRushing 8 сағат бұрын
The only BH product I have e used is Touchless in a foam cannon. I do think I need to switch to an IK foamer to save product. Of all the BH products you tested I think I will try the quick detailer. I like to use Pans Rinseless as my drying aid right now. Works great and won’t clog up my drying towels. I think I saw on OG he likes to use Touchless as his wheel and tire cleaner for regular maintenance washes.
@FineDetailingAZ 8 сағат бұрын
@@BryanRushing thanks for watching Bryan! The QD is awesome you should grab the touch on too. So cheap. I think Matt still uses brake buster for his wheel and tire but you can also use touchless
@BryanRushing 8 сағат бұрын
@ finishing your video now 😀 Will try the Touch On also. Have you tried Maniac Wheel and Tire? What’s your favorite combo product for wheel and tire?
@FineDetailingAZ 8 сағат бұрын
@@BryanRushing I did…I’m probably the only person who didn’t like it. I know everyone says it’s crazy I just didn’t see great performance. For a 2n1 combo loch Chemie AWH is amazing. Or ADS 4:1
@BryanRushing 8 сағат бұрын
@ So you use their wheel cleaners on the tires also?
@FineDetailingAZ 7 сағат бұрын
@@BryanRushing which? AWH? Yeah it melts dirt and old dressing. Check my short videos you’ll see it’s nuts
@adrian.adrianl6401 8 сағат бұрын
Bilt hamber do great products generally easy to use very economical in the U.K. not sure what the pricing would be in the States but performance and value money are hard to beat . They are never far of being the best of one of the best on each product they do .
@FineDetailingAZ 8 сағат бұрын
@@adrian.adrianl6401 price and dilution are excellent here as well. I’m a fan
@DesertShineAutoSpa 8 сағат бұрын
Another great video Ryan
@FineDetailingAZ 8 сағат бұрын
@@DesertShineAutoSpa thank you very much!
@YanniObkirk 8 сағат бұрын
Surfex is not a great tire cleaner. It is a great degreaser though. Keep it away from plastics.
@FineDetailingAZ 8 сағат бұрын
@@YanniObkirk thanks for the feedback. First time using it. So BH doesn’t have anything great for tires?
@YanniObkirk 8 сағат бұрын
@@FineDetailingAZthere are just better products for cleaning tires.
@FineDetailingAZ 8 сағат бұрын
@@YanniObkirk I learned that. I find it interesting BH doesn’t t have a dedicated tire cleaner. They have a full line. Seems like a missed opportunity
@miscellaneous5215 8 сағат бұрын
Thanks for the review. Great, no hype line. I also use a Marolex for BH Touch-Less. Works much better than my IK Foamer.
@FineDetailingAZ 8 сағат бұрын
@@miscellaneous5215 thanks for watching. Loving bilt and the marolex. Hopefully you subbed!
@adrian.adrianl6401 8 сағат бұрын
Bilt hamber do great products generally easy to use very economical in the U.K. not sure what the pricing would be in the States but performance and value money are hard to beat .
@FineDetailingAZ 8 сағат бұрын
@@adrian.adrianl6401 thanks for watching. The prices were very reasonable along with the dilution rates the value is there for sure
@FineDetailingAZ 9 сағат бұрын
Products Below ⬇ ⬇⬇ Bilt Hamber Line (Carzilla): bit.ly/40qwpnJ (FD5 Saves 5%) Bilt Hamber (Obsessed Garage): bit.ly/4jmBO7J Marolex Sprayer (Obsessed Garage): bit.ly/4hlp9QL Marolex Sprayer (Amazon): bit.ly/3ChUHbt ⬛⬛⬛⬛⬛⬛⬛⬛⬛⬛⬛⬛⬛⬛⬛⬛⬛⬛⬛⬛⬛⬛⬛⬛⬛⬛⬛⬛ Savings For My Viewers ⚫ The House Of Rags: bit.ly/TheHouseOfRagsFD10 Save 10% with code FD10 ⚫ Armour Detail Supply: armourdetailsupply.com/?ref=FD10 Save 10% with code: FD10 ⚫ Sky's The Limit Car Care: www.carpro-us.com?aff=27 SAVE 10% with code: FD10 ⚫ CARZILLA: carzilla.ca/?ref=finedetailing SAVE 5% with code: FD5 ⚫ Ethos Car Care: tinyurl.com/EthosFD15 FD15 saves 15% ⚫Detailed Image: bit.ly/DI_SAVE_10 Save 10% with code: DetailedImage3553 ⚫ Obsessed Garage: bit.ly/48c18Za ⚫ Car Supplies Warehouse: bit.ly/4d7w6CT Get Free Shipping on orders over $125 with code FREESHIP ⚫ Pressure Washing Set Up: ➕Mosmatic Nozzle Tip: bit.ly/404QSQq ➕Mosmatic Spray Gun: bit.ly/3NySBWw ➕Active 2.0 Pressure Washer: bit.ly/4eNwmbD ➕Active 2.0 Pressure Washer: amzn.to/3S5y1zZ (Amazon) ➕Cox Hose Reel & Hose: bit.ly/407NeVN ➕Bucket Filler: bit.ly/407NeVN ➕MJJC Foam Cannon: bit.ly/3YPVBUY ➕Griots Boss Foam Cannon: bit.ly/3BZMHeu ➕Griots Boss Foam Cannon: amzn.to/3ZG8zW8 (Amazon) ⚫ Other Products I use in the shop: ➕THOR GOAT Drying Towel: bit.ly/TheHouseOfRagsFD10 ➕Pressol Spray Bottles: bit.ly/4eN8vsA ➕Poka Detailing Cart: amzn.to/3ZIGwFE (Amazon faster shipping) ➕Rupes HLR15 DA Polisher: amzn.to/4cNizQk (Amazon) ➕Rupes HLR15 DA Polisher: bit.ly/40hMqxA (Obsessed Garage) ➕Rupes HLR15 DA Polisher: bit.ly/47aA6Rp (Car Supplies Warehouse) ➕Ego Leaf Blower: amzn.to/465FuEN (Amazon) ➕Ego Leaf Blower: bit.ly/3UiPoym (Obsessed Garage) ➕Vyper Chair: bit.ly/3LQtXA8 Find my social media links here: linktr.ee/finedetailing DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission on a purchase without additional cost to you. Thanks for your support!
@michaelhalstead64 9 сағат бұрын
LFG
@FineDetailingAZ 9 сағат бұрын
thanks!
@mrhardy7660 17 сағат бұрын
How do you feel about diy rinseless wash?
@FineDetailingAZ 17 сағат бұрын
@@mrhardy7660 surprisingly I’ve only tried it once and I got quite a bit of polymer spots. That said l, after only one test I’ll reserve any judgement. I need to keep testing for sure.
@ptrazz11 21 сағат бұрын
CHEM X Stars and Stripes!
@FineDetailingAZ 21 сағат бұрын
@@ptrazz11 I keep hearing good things! I am curious how harsh it is for plastics and trim long term
@cutlasssupreme508 21 сағат бұрын
As a detailer ive learned that its not the foam cannon that makes the difference. " Besides the orifice" its the water pressure...
@FineDetailingAZ 21 сағат бұрын
@@cutlasssupreme508 for sure it’s a combination of everything. But yeah the pressure is huge
@cutlasssupreme508 21 сағат бұрын
True.. high viscosity soap is a must.. Random : Do you sniff your microfibers?
@FineDetailingAZ 20 сағат бұрын
@@cutlasssupreme508 not normally 🤣. I do smell the occasional soap though
@cutlasssupreme508 20 сағат бұрын
@@FineDetailingAZ i use so many I start smelling them to make sure it's the right one
@FineDetailingAZ 20 сағат бұрын
@ I just separate by color. Blue is for glass. Pink for quick detailer yellow interior etc. just my system
@sfomann Күн бұрын
I ordered it from detail image. When will it ship?
@FineDetailingAZ Күн бұрын
@@sfomann awesome, me too! Not sure you should send them an email and ask
@sfomann 23 сағат бұрын
@ oh sorry. I thought this channel was detail image 😟
@FineDetailingAZ 23 сағат бұрын
@ nope! They gave me a code to help save viewers some money though
@TerryOConnell-o7o Күн бұрын
I have both Sooprinse $20 off Amazon and MJJC $79 from Dtlrsupply and definitely can't tell difference in foam quality. I did add new silicone tube with weighted strainer and new foam filter with felt from MJJC to the Sooprinse... major difference in units is fluid capacities. MJJC taking the lead for this. Love them both!
@FineDetailingAZ Күн бұрын
@@TerryOConnell-o7o thanks!
@joerodriguez8546 2 күн бұрын
I have one. It’s worth it. Amazon, baby!! Sooprinse Foam Cannon
@FineDetailingAZ 2 күн бұрын
@@joerodriguez8546 thanks Joe!
@ssjcajas 2 күн бұрын
Chem-X Chrome Cannons. $25 or both for $50 and work right out of the box as they have a 1.15mm orifice installed to work with lower gpm pressure washers.
@FineDetailingAZ 2 күн бұрын
Nice, I think they are very similar to this cannon. I need a 1.25 but that's an easy swap.
@AnthonyMendez-xh1sx 2 күн бұрын
@@ssjcajas u need 1.05
@ssjcajas 2 күн бұрын
@@AnthonyMendez-xh1sx nope I use a Ryobi 1800 1.2gpm and they work perfectly fine.
@stephenlouden480 2 күн бұрын
got the Bearforce, and its great. I dipped it in polyurethane a few times to thicken it considerably, and I've dropped it a few times with no cracks yet, so that is my free hack to all of you with it. 💪
@FineDetailingAZ 2 күн бұрын
Awesome, I thought about plasti-dipping them
@heavy8832 2 күн бұрын
I have 3 ASTRO AI cannons, 2 of them were 20$ they all push nice foam.
@FineDetailingAZ 2 күн бұрын
Never heard of that! I'll check them out.
@DavesaysHi 2 күн бұрын
I ought a cheap one $10? on TEMU and it's incredible. I also spent $4.25 and bought 4 extra foam generating filters for whenever it clogs and foam production drops. I haven't dropped it but if it happens I'll spend $20 and breaks I'll buy two more just in case.
@FineDetailingAZ 2 күн бұрын
@@DavesaysHi nice! I do wish there was a cheap one with the hard plastic base then it would never break. I guess that could be worth the money but you’d still need to buy 4 of the cheaper ones for the same price
@bloatedtonydanza7798 2 күн бұрын
What’s the orifice size in that one bro? 1.1mm?
@FineDetailingAZ 2 күн бұрын
1.25
@IwokeUpInSOMA 2 күн бұрын
21:45 well said. Busted my a$$ fully prepping/decontaminating & polishing my whole car, then ceramic coated... and ive deliberated with these thoughts for the longest time! Well said!
@FineDetailingAZ 2 күн бұрын
@@IwokeUpInSOMA thanks! It’s lot of work for sure
@ssjcajas 2 күн бұрын
The MJJC Pro v2 is the best foam cannon on the market IMO. But I also have the Chem-X Chrome Cannons and they work just as good as any of those and they are only $25 a piece.
@FineDetailingAZ 2 күн бұрын
@@ssjcajas totally this was my first v2 pro use and it was awesome. Shoutout to cheap cannons
@ssjcajas 2 күн бұрын
@@FineDetailingAZ what I really like about the MJJC that I think more foam cannons should adopt is the quick connect that it has. You can just use your hand to open it. Not need for a tool if you need to change the orifice
@FineDetailingAZ 2 күн бұрын
I do enjoy that as well.
@seabrew1 3 күн бұрын
I've had the same experience with the Big Gold Sponge. The edges have yet to tear off after 2 years of light to moderate use.
@FineDetailingAZ 3 күн бұрын
made in america!
@alexdodd6768 3 күн бұрын
I used the textile sealant today. Wasn’t that impressed
@FineDetailingAZ 3 күн бұрын
@@alexdodd6768 KCX confirmed that it wasn’t designed for carpets despite it saying allround. I suggested they update the label and website
@alexdodd6768 2 күн бұрын
@ i used it on a convertible mini.. terrible did almost nothing
@FineDetailingAZ 2 күн бұрын
ohhh that's good to know they do say it should work for convertibles.
@RemedyAutoDetailOfficial 3 күн бұрын
Now, to comment on the correct video!! ( I had two videos playing at the same time!!! Oops) I have the MJJC v2 ... I can't belive a $20 foam canon works so well! Shocking indeed
@FineDetailingAZ 3 күн бұрын
haha all good! Yeah it's all a big conspiracy lol