thanks this is the tip I needed as I'm finally starting to do a campaign. First in Weasels Over Syria
@prestoo264Күн бұрын
The Magic Fuel Tank LO Amazing Vid, you can feel the adrenaline
@BogeyDopeКүн бұрын
@@prestoo264 Yeah....finally got the shot I wanted and it was still on..... Figured it is what it is at that point.
@prestoo264Күн бұрын
@BogeyDope it definitely sells the effect, and to be fair I only noticed it after rewatching the clip more times than I would like to admit xD
@DaTaterКүн бұрын
Great video/tutorial as usual mate. Many thanks for posting. 👍🏻🫡
@colboyhell2 күн бұрын
I just come here for the "Alllrrriiighhhhhtttt"..."ooooohhhhh yeeeeeaaaaahhhhhhh" Thanks for these videos. Great way to see different ways of doing things and approaching situations
@titirex-l7v2 күн бұрын
hi, When I am pressing TMS right it didn't do anything, can you help me ?
@BogeyDope2 күн бұрын
@titirex-l7v What are you trying to do?
@titirex-l7v2 күн бұрын
@BogeyDope I am trying to lock different targets
@BogeyDope2 күн бұрын
@titirex-l7v tws or rws?
@titirex-l7v2 күн бұрын
@BogeyDope tws
@BogeyDope2 күн бұрын
@titirex-l7v if you're in TWS, all that is needed is to TMS up once on each target and then you can TMS right to cycle through them.
@cbinder465 күн бұрын
For a pre-planned strike, would we just need to have a steerpoint on each building? As a bomb is released, cycle to the next steerpoint, etc, etc. When you say "select the target" in the TGP, are you referring to TMS up short?
@BogeyDope5 күн бұрын
@cbinder46 ia steerpointmakes it easier,yes. Or you can use mark points. This is a 60sec tutorial, not much time to cover much. Yes tms up short to designate targets in the tgp.
@StealthySpace75 күн бұрын
Quick question, how do they expect us to desk mount us? The rail completely covers any screw hole used for mounting this
@StealthySpace75 күн бұрын
@ uhhhh, was that meant for me?
@BogeyDope5 күн бұрын
That is a good question. Definitely something they may need to look at.
@StealthySpace75 күн бұрын
@ all good brother. My solution was to just leave the far holes uncovered by the rails. Lets me get 2 out of 4 secured at least which is something
@Tristan_otto256 күн бұрын
How do i lock the target and bring the designator up down and to the sides
@BogeyDope5 күн бұрын
@Tristan_otto25 At 1:28. Make sure the TGP screen is SOI by DMS (Display Management Switch) switching down until you have a white box around the screen. Once it's SOI, you can slew the TGP around with RDR cursor switch. Lock with TMS (Target Management Switch) up.
@fisherengert60306 күн бұрын
Best tutorial channel for the f16
@SNOW-zl5jp7 күн бұрын
It was confusing at first to understand what you were saying when describing what to press. I think you were talking in abbreviations not the full word. Sounded like you were saying Timmy Switch and I was like WHAT IS A TIMMY SWITCH 🤣
@BogeyDope7 күн бұрын
@@SNOW-zl5jp Sorry about that. TMS (Target Management Switch) I guess I assumed the keybinds at 1:00 would make it easier to understand
@kK-yb8rd8 күн бұрын
Lovely
@kK-yb8rd8 күн бұрын
Oh cool stuff here..
@Venom22388 күн бұрын
Hi, I just have a question ? Do the MFD setup work with any sim games and space games ?
@BogeyDope8 күн бұрын
@@Venom2238 Currently, the only games supported within WinWings software are, DCS and BMS.
@Venom22388 күн бұрын
@@BogeyDope I understand, Thank you for letting me know, mutch more easier now to know what to do if i am going to make a flight sim or a space sim, again thank you.
@droneforfun53848 күн бұрын
Is that a filter applied to the voice? Where to find?
@BogeyDope8 күн бұрын
@@droneforfun5384 Yes. It's called voicemod. www.voicemod.net/
@droneforfun53848 күн бұрын
@@BogeyDopethanks for your helpful videos as well. Merry xmas 😊
@supercarsnaviation61488 күн бұрын
Datalink fix isn’t working for me
@BogeyDope8 күн бұрын
That was a workaround for a bug from last year. This has since been fixed. Make sure you are following the new Datalink procedure. My new startup tutorial goes over this here - kzbin.info/www/bejne/poTVZa2XqNh0gpo Also at 0:58 into that video, you will see the actual fix from the changelog. It explains exactly what was done and what is required now. Please also ensure you are outside in order to get a GPS signal. If you are under a hard shelter on startup, you will need to first taxi outside after you have aligned your INS and then set MIDS to on. Hope this helps.
@supercarsnaviation61486 күн бұрын
I flicked on the GPS Switch for 60 seconds and made sure it said GPS System, then I turned on the MIDS and it didn’t do anything. My HSD still didn’t populate with datalink information.
@BogeyDope2 күн бұрын
@supercarsnaviation6148 Not sure. I have not had any problems. Do you have this issue with the F-16 everywhere? Or just in FIWOS?
@supercarsnaviation61482 күн бұрын
@@BogeyDope just in fiwos, although I’m gonna try again because stupidly enough I think I may have forgotten to press transmit l16 on the HSD. I’ll let you know if I forgot or if it’s actually a problem with FIWOS.
@AlexVangeenRacing9 күн бұрын
I don’t have a target in as a waypoint. And when I goes out of SP mode it wanders off and I have no idea where it’s pointing. How do I get it to be in SP and I can adjust from there?
@denisdacikj68469 күн бұрын
i fucking love you bro
@kK-yb8rd9 күн бұрын
Bogey any tutorial video for detecting ground stationery targets with ground radar for f16?
@MartinShorlek9 күн бұрын
I follow all the steps but the bomb won't release! One thing caught my attention! The laser code is displayed in the top right corner for you! But it doesn't appear for me. When I press the release button this laser code flashes! Can anyone help pls ?
@stevesteven-gw4zy9 күн бұрын
Jest got my wineing mfd , works great , out of the box, very happy .
@LobstersGaming10 күн бұрын
Great video! Thanks man
@kK-yb8rd10 күн бұрын
Keep it up
@kK-yb8rd10 күн бұрын
I find it so hard to gun in f16
@BogeyDope10 күн бұрын
check out my tutorial here - kzbin.info/www/bejne/pqSVo4WDhZyFgqc
@kK-yb8rd10 күн бұрын
@BogeyDope nice
@karu158510 күн бұрын
Thank you for doing this series, I played it somewhat alongside you, learning new stuff, when I didn't know what to do I copied you, etc. Thanks! Can't wait for Weasles over Syria II
@kK-yb8rd10 күн бұрын
Herro
@kK-yb8rd10 күн бұрын
Whick tank uses fuel first .centerline or wing
@BogeyDope10 күн бұрын
Centerline External Tank goes first. I explain the fuel system here. Fuel flow order starts about the 4:00 mark - kzbin.info/www/bejne/apCaZoh3Z7GDftU
@kK-yb8rd10 күн бұрын
@BogeyDope ok thanks
@supremeleader551611 күн бұрын
Did they had its fuel at Kirkuk or c-130 brought it?
@BogeyDope10 күн бұрын
JP-8 was already there on base. No need for a C-130 to bring it.
@supremeleader551611 күн бұрын
what does TOS means?
@BogeyDope10 күн бұрын
TOS typically means Time On Station.
@supremeleader551611 күн бұрын
Hi nice story, do you have any story regarding F-16's EPU which used Hydrazine? its very deadly i heard
@BogeyDope10 күн бұрын
Yes, it is very dangerous. Fortunately, I never had a pilot use the EPU.
@supremeleader551610 күн бұрын
@@BogeyDope oh thats good
@Onehighcat11 күн бұрын
This video single handedly got me to quit throwing the F-16 into the ground. Thank you very much. Went from thuds to butter.
@diegozuniga629212 күн бұрын
Hi Sir which axis or button do u use for your zoom in and out in ur virpil hotas?
@ParZIVal19D12 күн бұрын
Thanks for not showing us how to actually install it to DCS.🤦🏼♂️
@BogeyDope12 күн бұрын
There isn't an install procedure for DCS. I go over the install procedure for the tobii software and how to get it setup at around the 4min mark. Once it's setup and configured, you just launch DCS. I didn't have to do anything else. As I explained at 4:50. What specifically are you looking for? Maybe I can help??
@edwardbrooks855613 күн бұрын
As a former ssgt fuel systems technician, there's only one bladder cell f-1, the rest of the system is integral tank.
@BogeyDope13 күн бұрын
@@edwardbrooks8556 Yep. Shouldnt have said Bladder. Incorrect. Wet wings.
@king_jeremy10114 күн бұрын
Absolute legend! Thx for the videos, keep them coming.
@fredellis576415 күн бұрын
Some of the best "how to videos" available. Thanks much!
@Benjiro-wp4yu16 күн бұрын
With this game, I think I can be a real jet fighter
@Past10Performance17 күн бұрын
I am having a hard time bugging targets on radar that have been designed as enemies by awacs. I can bug them on the right mfd to track them visually using hmd but when i make FCR SOI and bring cursor over red targets and press tms up its unresponsive? What am i missing?
@BogeyDope17 күн бұрын
@@Past10Performance If you are attempting to bug targets that are red and have been designated by AWACS but are out of range, you will get no response. Keep in mind that the markers on the FCR are just representing Where AWACS sees them, and does not necessarily represent your radars capability of seeing them wait until you have a radar track of those markers and then you will be able to bug them. AWACS can see things way beyond your radars capability.
@Past10Performance17 күн бұрын
@BogeyDope ah ok I'm pretty sure I was within range but it would make sense that they could be outside of antenna elevation or behind terrain, will give it another try thanks for the reply
@BogeyDope17 күн бұрын
@Past10Performance in case it's helpful, here is my quick radar tutorial - kzbin.info/www/bejne/oZykoIirjshnj5Isi=6b8XPO4GTzg2qYaU
@adamleblanc529417 күн бұрын
Just a note, they recently upgraded the pedals. You no longer get the rubber mat and arms, and instead they changed it to a thick metal plate with non-slide feet. Got mine in a few days ago, and it's great.
@paladincubano18 күн бұрын
1:17 holy s... I thought it was Wags!!
@charlier140919 күн бұрын
I like the pride in your work. But let’s face facts the 16 had no chance over the 15e at Seymour that got initials on it’s exceptional release. Don’t believe me look it up. Much love my crew chief brother
@BogeyDope14 күн бұрын
I'm confused by this comment. Are you referring to the throttle grip of the 16 vs 15e?? Or the jets overall? I'm not sure I follow what you're trying to say.
@charlier140913 күн бұрын
@ I don’t even remember why. I’ve been pretty out of it for the past month.
@LalaPala-ml2or19 күн бұрын
you should use markpoints
@mk_78720 күн бұрын
Thank you for the informative video
@F16crewchief120 күн бұрын
Need to find mine in storage now
@AdamCross-c2h20 күн бұрын
How accurately does the DCS F-16 Viper simulate the startup procedures and overall operation of the real F-16? Is it like 1:1?
@BogeyDope20 күн бұрын
@@AdamCross-c2h As for startup procedure, yes 1:1, as close as you can in a sim. In my opinion, overall operation, depending on what you mean by that, I believe it is pretty darn close to 1:1. As close as you can get in a sim.
@BogeyDope20 күн бұрын
@@AdamCross-c2h Here is a demo of a startup as close as I could get to the real startup - kzbin.info/www/bejne/j3Syh6yrr5moj7Msi=70C_aW8XUELWLCYS
@AdamCross-c2h20 күн бұрын
@@BogeyDope Awesome dude, thank you for the speedy response as well!
@talvid198821 күн бұрын
thanks for the tip on cycling contacts with TMS right
@11charlieng8121 күн бұрын
i cant get DL to work on the f16 anymore. so frustrating.
@BogeyDope21 күн бұрын
@@11charlieng81 Seems fine for me. Are you inside a shelter or under anything when attempting to turn it on.
@11charlieng8121 күн бұрын
@ nope im refollowing your playthru to a T and nothing. Mids left off til i have gps system showing along with the gps switch on for at least 1 min. Ins fully aligned prior to switching mids on
@11charlieng8121 күн бұрын
When i go to “reset” my gps in the DL ded page, it says its off. So i turn it on turn it off again and then back on. Not sure why its off by default now?
@BogeyDope21 күн бұрын
@@11charlieng81 hmmmmm. I'll have to check
@11charlieng8121 күн бұрын
@ thank you! If it works for ya let me know and ill just try again
@hadroncollider1721 күн бұрын
I found the proper way to use the suction cup from an obscure comment in a forum. You have to clean the suction cups with soap (and wash your table surface with soap as well, I used a sponge). Then wet the suction cup with a 50/50 solution of soap and water. Dawn dish soap works really well. Then press them firmly into the desk. It will be stuck in place. I have pretty high friction on the throttle and the suction cups are immovable now, no sliding or anything. I actually don't know how I'm going to remove it from my desk now, so I guess it's kind of on there permanently.
@BogeyDope21 күн бұрын
@@hadroncollider17 I tried that and it does not work for my desk. My desk is very porous.
@MMORPG8722 күн бұрын
Yo Bogey!!! your under 1 min vids back in the day got me dropping targets instantly without being confused... i spent soooooo much time off and on to the point i lost interest in DCS till ur vids starting hitting my feed back then. I dont play much anymore since i have to move everything all the time but hope to get a permanent setup one day... till then tho im curious if u would ever review other product brands. Moza Sim has a force feedback base that seem pretty cool. Maybe they could send u a demo to try out and see if its legit or gimmicky, i wouldnt mind swapping out my Virpl bases for a couple of those if they match expectations
@BogeyDope22 күн бұрын
@@MMORPG87 I would love to review a moza stick. I talked with their sales guy at the flight sim expo this year. Never got a response. Sent an email after. Still no response. Soooo..... Im not cool enough I guess. Haha. If they send me one to review I'll review it. I would really like to. My experience with it at the expo was less than good though. But I didn't feel they had it really ready for use yet. Lot of stuff wasn't working at their booth. So I don't think my thoughts while at their booth at the expo are an accurate review. I'd like to review their released version. We'll see.