Жыл бұрын
2 жыл бұрын
Пікірлер
@FlyDreamEcuador 2 сағат бұрын
That mountain flight footage is surreally stunning! Awesome craft! I saw the QAV S2 7" frame has arm braces like the Apex 7", makes me wonder how these frames compare...
@TheOoze777 20 сағат бұрын
What was the purpose of removing the blue and black wires from the VTX wire harness?
@colibrifpv 13 сағат бұрын
Those wires are for an SBUS connection, intended to be used for the DJI remote. If you are using the DJI remote, you should leave them, but if you're using another remote, such as ELRS, you won't need that connection and it's best practice to remove them so they don'y cause interference.
@Priest_Of_Zebak Күн бұрын
Is that an elrs reciever/antenna on the front? Which is it? Trying to find which one to get for my radiomaster boxer max
@EdEditz 4 күн бұрын
Great review. I have the newer version with the fixed XT60 connector and I agree with you, I wish it was a loose connector. I made a sort of adapter that goes into the fixed XT60 and has a male XT60 connected at a 70° angle pointing forward. This solves it for me because the battery cables are too short to reach that fixed connector.
@colibrifpv 2 күн бұрын
I love the look of captured xt60's but it's annoying when they angle them back because you end up using an adapter most of the time. Sounds like you found a good solution!
@johangoz 5 күн бұрын
hola, si de casualidad metes el dedo dentro de una helice te lastima mucho o se frena / rompe el helice?
@colibrifpv 5 күн бұрын
Bueno con los tinywhoops o un microdrone se detuviera el motor, pero con un motor y hélice más grande si puede lastimar el dedo bastante
@Jon-s1w 5 күн бұрын
What battery's r u using
@Jon-s1w 5 күн бұрын
What battery's do u use
@colibrifpv 5 күн бұрын
@@Jon-s1w Hey 👋 I'm using 6s 850mah batteries for long flights, and with my build 4s 550mah is under 250g.
@colibrifpv 5 күн бұрын
@@Jon-s1w 850mah 6s packs for loads of power and long flights 👌
@Jon-s1w 5 күн бұрын
@colibrifpv how much flight time u get with the 4s 550mah battery
@colibrifpv 4 күн бұрын
@ About 4-5 minutes, more like 10-12 minutes with the 850mah 6s
@Jon-s1w 4 күн бұрын
@@colibrifpv okay thank u good info
@camilompz5627 6 күн бұрын
Um abraço do Brasil
@colibrifpv 5 күн бұрын
@@camilompz5627 Gracias amigo 😁
@ILLBEDRONED 8 күн бұрын
Just got mine and love it 💯
@colibrifpv 8 күн бұрын
That's awesome, enjoy it!
@Swiftss 8 күн бұрын
Can you see the blades in the O3 or mounted gopro when flying? (considering its a X frame that is marketed as a cinematic frame)
@colibrifpv 8 күн бұрын
Hey there, in my experience you will see props in view with your DJI O3 footage, you will not see props in view in your GoPro footage. Check out this review video for some flight footage and examples, all of the shots were filmed on this drone... kzbin.info/www/bejne/oGScZ3eaqLh-rJIsi=HfRcAh-n_dDlIAr3
@Swiftss 7 күн бұрын
@@colibrifpv Thankyou for answering, absolute legend!
@colibrifpv 6 күн бұрын
@@Swiftss You're welcome bro, nice to have you here!
@yodecaf 9 күн бұрын
Bought a used yeti xl to restore and found this channel. The quality of your content, editing and camera work for a 10 year old channel is phenomenal
@colibrifpv 8 күн бұрын
Thanks for the kind words, I really appreciate it! You can't go wrong with an Axial Yeti, it's a super fun RC than can be used as a crawler or a basher. I really enjoy tinkering with RC vehicles and doing scale builds, although most of what I'm doing now is related with FPV drones. Enjoy that Yeti!
@YourdailydoseofShorts-un5vi 10 күн бұрын
you also can start recording automatically with a gopro. Use gopro labs and select a trigger: noise or acceleration. Easy
@colibrifpv 10 күн бұрын
That's a great tip, I didn't know that! I am in the habit of starting/stopping from the app because I can check my exposure at the same time, but it is a little tedious sometimes...
@vatsalkonkani 11 күн бұрын
How much range to expect with that small copper wire hanging out from bottom & pocket radio ?
@colibrifpv 8 күн бұрын
It's hard to say exactly, but it should be more than enough for a drone this size, as in 500m to 1km should be very safe, much longer range is possible, especially if you have LOS. You will definitely get much better range if you set your packet rate to 50, it might have come as 250 by default. The higher the packet rate, the lower the latency, but the shorter the range. Set it as low as possible if you are after maximum range.
@vatsalkonkani 8 күн бұрын
@ yes. I am thinking to use it as my travel drone on motorcycle. Easy to carry and powerful also. I don’t intend to fly it beyond 1km but sometimes you just cross the limits and it’s better to know these things. If it give 500-1km with this tiny antenna that will be great 😃 Yh it’s 250. I will change that and try it. Actually i didn’t get chance to fly it since i received it. Installed gps for not losing it over water or random places. Gps and elrs goes on to same 5v and G pads but has two uart while tx and rx has 2 uart 1 & 6. Anyways thanks for reply
@MrStevegibb 11 күн бұрын
Those newbee drone foams are microfibre and very abrasive I find them irritating on my skin.
@0MNlPRESENCƏ 12 күн бұрын
The hawk two huh?
@colibrifpv 11 күн бұрын
Yup, this was a review of the Tinyhawk II. It is a bit dated now.
@Dawe957 13 күн бұрын
Nice whoop nice review
@colibrifpv 11 күн бұрын
Thanks a lot for your feedback, glad it was helpful!
@Anadrol88 13 күн бұрын
Thank you so much for the info that V1 is better thanks to the MPU6000 !
@itsJM1 13 күн бұрын
Is there a way to add a gps after getting the drone? I have no need for one now, but I may add one in the future.
@colibrifpv 11 күн бұрын
Yes, absolutely, you can purchase any GPS module and connect it to an available UART on the flight controller, then you just need a mounting solution. There are TPU prints available for this drone which you can either print or purchase from iFlight.
@Kot-n8m 14 күн бұрын
Camera position Looks safe No needs for extra protection?
@colibrifpv 11 күн бұрын
I think the camera is pretty well protected with the updated cage, of course you could break it if you hit it just right but I have crashed mine several times and no damage so far!
@Kot-n8m 11 күн бұрын
@ thank you bro
@usernamenotavailable4072 14 күн бұрын
can i use this quad with walksnail vrx?
@colibrifpv 11 күн бұрын
Yes, you can install a Walksnail VTX in this quad. The included carbon mount has 20x20 mounting holes and BetaFPV has prints available for certain VTX's.
@greennixon00 14 күн бұрын
My $600 Ray-Ban eye glasses are plastic. Almost all of not all rx glasses are made of plastic for protection
@colibrifpv 11 күн бұрын
That's a good point, thanks for sharing your perspective.
@thatmanfromukraine 15 күн бұрын
Came to comments to read what other people are saying about their WS experience. I’m a newbie in FPV and decided to start with WS, the main reason - because I need a tinywhoop to fly at home. Only WS and hdzero has 1s whoops for now. I’ve ordered meteor75 and goggle x, WS VRX on its way as well. Moonlight kit. I’ve decided to give it a try. My main concerns - goggles x, I never saw Dji goggles in person, but goggles x looks good, but not so premium. Painting is fine, but filled text under paint looks cheap. Missing power button, a lot of different glitches on my unit, even produced at the end of 2024. HDMI in - just useless, again, maybe my unit, but I’m not able to get any signal through it. Except the one below. For hdmi out you have to set goggles to standard framerate to make it work with 60hz display. MacBook user? Caddx doesn’t have some agreement with Apple to properly render image in goggles for you (confirmed by caddx support, but it’s a not a part of product description), you will get a pink tint over the image. Say goodbye to any sims on your laptop. So what I have now for $450 for goggles x? (So called top goggles from caddx) Frustration, it looks like it has a good potential, but so many mistakes and qc issues that I’m not sure I should trust and stay with this system. I mean they have a lot of things I’ve been looking for like hdmi in and out, standalone vrx, something a bit cheaper than DJI. I’ll wait for VTX to come and will test it for my application, maybe it will be the way to go, but for now - I would suggest everyone to think twice before getting goggles x, better spend less and grab goggles L, seems like they are doing much better at current state. Anyone else here having the same mood like I do?
@brianpreston8483 16 күн бұрын
Never owned a drone, how bad is the learning process
@colibrifpv 16 күн бұрын
It is a steep learning curve first time around, but it gets easier and there are lots of people in groups like Facebook that will help you out!
@Kerionite 16 күн бұрын
Big battery in the radio and just plug into power on your radio
@T-RexOnline 16 күн бұрын
Does this drone work with DJI goggles 3 and DJI remote 3?
@ClusterDuckGarage 9 күн бұрын
This is my question, also! Want to get a setup that I can get other little micros to have fun with, but not switch controllers and goggles. Trying to find the right matchup is a struggle for the newbies. 😂
@Desert-edDave 17 күн бұрын
10:29 Gyroflow dev build has the profile for the Walksnail Moonlight lens... It should also auto-detect it if you are using a recent enough build of the Gyroflow app.
@FuzzmanPL 18 күн бұрын
Hey, i got my nightfire, but i have problem with leds. Can you record tutorial how can i turn them off or on from switch on RC? I do pinio and is not work…
@melted_cheetah Күн бұрын
Same question here! Tried to set up same as my Pavo20 but the LEDs won't turn off and on with the switch I have programmed to. Same setting but nada.
@fpvsmurf 18 күн бұрын
Great review! Walksnail also works with the original Walksnail avatar dominator goggles and Recon HDs! Just throwing other options out there...
@angelnavedo8086 6 күн бұрын
Seriously 😮!!! ??? This is the comment I was looking for . ✅thank you !
@danyacatSO2 19 күн бұрын
How can i buy this led? I alderly have Pavo 20 pro...
@colibrifpv 19 күн бұрын
I don't think they sell it separately at the moment but maybe they will in the future...
@SFPFPV 19 күн бұрын
I've done every setting combination available and flown in every lighting setting possible, but my Moonlight "4k" always looks about as good as my Vista 720p footage. I ended up switching fully to WS anyways for the much better looking color OSD and no range limitations, but I sure do miss the video quality of the O3.
@GunnyTech 19 күн бұрын
I installed my nightfire chip yesterday in the same place as yours, but i have a question. There is originally a lock nut located directly under the carbon top plate did you have to remove that to get your chip installed in that location? I dont see any way i can reinstall this metal nut without it being in the way or breaking something.
@jamiegarner007 19 күн бұрын
Can I buy this drone without 03 unit (which I already have. )Cannot seem to find it online anywhere
@colibrifpv 19 күн бұрын
I don't think GepRC offers a version of this drone without VTX, so you would have to buy the frame and build it.
@jamiegarner007 19 күн бұрын
@ ah ok.. thanks. Building one scares me a bit.looks bit complex so might just go ahead and buy the thing as a complete drone then . Flying avata 2 after flying on lift off for a few months.the avata is not giving me much confidence as feel underpowered compared some of the quads I’ve flown on lift off.
@Jon-s1w 20 күн бұрын
How do u like the flash 1804 6s motors do they have good punh this my first build
@colibrifpv 20 күн бұрын
On this lightweight quad they have tons of power, you could easily carry a GoPro Bones or just a heavier battery and film with your O3
@Jon-s1w 19 күн бұрын
@@colibrifpv okay sweet I been trying to find someone to talk to about this an figure it out. I just got right now the frame I have the dual bAND antenna for 03 air unit an flyfish gps m10 next will be my motors an my aio fc
@colibrifpv 19 күн бұрын
Nice 👌I'm using the Flyfish 1804s and they work great!
@Jon-s1w 19 күн бұрын
I believe I am going to go with the GEPRC TAKER G4 AIO - G4 FC + 45A 2-6S ESC - 25x25 seems light an easy to work with out of the two I suggested
@Jon-s1w 19 күн бұрын
U*
@ryanisacuc8381 20 күн бұрын
How would you describe the performance of the jfpv v3 2307 motors?
@colibrifpv 20 күн бұрын
Super powerful and efficient with throttle discipline. I think this quad is really designed to carry a GoPro, hence the oversized motors...
@ryanisacuc8381 20 күн бұрын
@@colibrifpv I posted this before seeing that you had commented feedback about them on someone else’s post, sorry about that! I wish I had seen it this morning before I ordered the motors cause I currently have no plans for using a GoPro. Not really going for lightweight but I’m hoping they aren’t too powerful to still fly smoothly on. I did however find some random Black Friday deal for 6s 3300mah 120C LiPos for 25$. Seemed wayyy too cheap to pass up if it is as advertised. So maybe I can just add weight using a huge battery lol. Worst thing is I have to buy another set of motors which isn’t a big deal though
@ryanisacuc8381 19 күн бұрын
@ haha yeah. Probably shoulda researched that more but I loved the frame so just thought I’d get the matching motors and not put thought into it. Thanks for the heads up, already looking into finding better motors for my drone weight. Appreciate it, Ima throw you a sub
@colibrifpv 19 күн бұрын
@ Thanks a lot, really appreciate it! If you have the budget for these they are awesome motors, If you want to save some money check out the Xing EPro 2207's, super solid option on the cheap
@SamCaracha 20 күн бұрын
Can you say something about the fitting and adjustability of those goggles for people with glasses?
@colibrifpv 19 күн бұрын
Sure thing... the Goggles X have adjustable diopters but I can't recall the exact range. The Integra Goggles use a different system, they have interchangeable plastic lenses that you can insert according to your prescription. I like this system because you just insert the right lenses for your needs when you first get them and you never think about it again!
@SamCaracha 19 күн бұрын
@@colibrifpv Thank you for your response! Yeah, I can see that, but that only works if you don't have specific glasses correcting astigmatism. In my case I could not even use contacts as a replacement. That is why I need glasses inside of the video glasses anyway and that's why I was asking, concerning the room inside the frame and also if I can fit them both of them on after the other on my nose, if you know what I mean.
@neonuser456 21 күн бұрын
Waiting for my parts to arrive, very excited to build this!
@colibrifpv 20 күн бұрын
That's awesome, you're going to love it, it's super silent and it flies forever (for an FPV drone). I'm flying mine on 6s 850mah.
@neonuser456 20 күн бұрын
@@colibrifpv Nice, I will be running on 4s 1300mah on 1804 motors
@clintbeasley 21 күн бұрын
Can you add remote ID if you want to this drone? thanks!
@colibrifpv 21 күн бұрын
Yes, there are very small RID modules available on amazon (see link) but since this drone is under 250g you may not need RID, unless you are flying Part 107... Cheap & small module 👉 amzn.to/3ZlrxAY
@clintbeasley 12 күн бұрын
@@colibrifpv awesome! Thank you!
@FitimSopjaniVideographer 22 күн бұрын
Hello, I bought this drone, and I put an Ovonic 80C 4S 650mah Lipo Battery 14.8V battery in it, and after taking off after 10 meters of flight, the drone falls to the ground without power.
@colibrifpv 22 күн бұрын
That's too bad... did you buy a RTF from GetFPV or did you build it yourself? Sounds like a bad ESC to me, first check all of the soldering joints, sometimes when soldering is not perfect, there could be a short, or if heat is left on the pads too long, a FET could be damaged. If it failed so quickly, my bet is a bad ESC. Try contacting GetFPV support if you bought it from them to see if they can do something for you...
@FitimSopjaniVideographer 22 күн бұрын
@@colibrifpv I bought it from them ready to fly.
@FitimSopjaniVideographer 22 күн бұрын
@@colibrifpv I don't notice that neither the ESC nor the motors are getting hot at all, I don't know what the problem is, the battery is 100% charged.
@colibrifpv 22 күн бұрын
@@FitimSopjaniVideographer Try emailing their support at [email protected], they are pretty good and they should be able to find a solution for you.
@PixelRacer64 22 күн бұрын
Fantastic, I am still looking but this looks great, analog for me with GoPro Thanks for all the details.
@colibrifpv 22 күн бұрын
It's a great quad, you'll love it and get some super long flights, just make sure you get some larger 63 batteries, 2000-4000 lipo or 4000-8000 li-ion👌
@Sonic_Ox 23 күн бұрын
Thanks for the great review video. I have one on order! Like you, I remove the SBUS wire from the 03AU harness when using ELRS receivers. In this video you said you removed two wires. I'm assuming you removed the SBUS and the second ground wire. Can you confirm? I've only ever removed one wire but if the craft works better removing two, I certainly will. Thanks again for creating content that I find interesting, informative, and entertaining. Happy flying amigo. 🫡 🍻
@colibrifpv 19 күн бұрын
Hey there, thanks a lot for your feedback, I really appreciate it! Yes, that second wire is ground, removing it probably isn't necessary but if it's not being used and you never have the intention of using the DJI remote, why not? Although I have forgotten to remove both of those wires before and it didn't seem to have any effect 🤷
@Sonic_Ox 19 күн бұрын
Thank you for the follow-up response! I removed the second ground wire on my OX-35 along with the SBUS, and everything seems fine. I think I'll remove both going forward. Thanks again for the info. 🤠👍
@rainbowrunner1136 23 күн бұрын
Are we getting flat profile in here ?
@colibrifpv 23 күн бұрын
I can't say for sure but Caddx frequently updates their firmware so fingers crossed 🤞😁
@Honeyhound 24 күн бұрын
I ordered 1 this morning . Very informative thanks.
@colibrifpv 24 күн бұрын
@@Honeyhound That's awesome, I think you'll really enjoy it!
@NONX01 12 күн бұрын
@@colibrifpvI don’t know how you can make a 13min full blown review and don’t have even one clip SHOWING HOW IT SOUNDS LIKE. It’s literally every drone review ever. First thing I want to know when I see a drone that I want to have a closer look at is ITS SOUND - and it’s NEVER there in any review. People are so thick omfg…. Imagine review a car, driving it with muted engine noise and just be talking… Jesus Christ🤦♂️
@johnhedgehog 24 күн бұрын
Li-po at need recycling
@colibrifpv 24 күн бұрын
@@johnhedgehog ha ha 😉
@melted_cheetah 24 күн бұрын
Heck yeah, already ordered! 🤘
@colibrifpv 24 күн бұрын
Hope you enjoy it!
@videocrudo5954 25 күн бұрын
en la pagina de betafpv para comprarlo solo veo dos opciones , elrs y crossfire, como o cual debo escoger para usarlo con el radio 3 dji fpv
@colibrifpv 25 күн бұрын
Debes comprar la versión ELRS, la cual es la versión base pq ELRS ya está integrado en la placa, y después tienes que vincular la radio con el O3 Air Unit.
@videocrudo5954 22 күн бұрын
@ muchas gracias,entonces si ordeno crossfire no podré usarla con el dji rc ??