140g Reef Tank Build: Clean DIY Sump for Under $100

[@Reefahholic]

Great video. FYI, always pull your tape immediately after you lay the bead. Much easier. Also, I’ve found that the tight inside baffles really only need one bead of silicone. A sump is a low flow tank and as long as the glass is clean- one bead of silicone is all you need. I do the most inner baffle first and work my way out. Saves a lot of headache.

[@jjmccloud]

I been doing just the outside beads on the bubble trap baffles for ever, works just fine especially since there isn't any pressure to hold but even when tank is full it's just fine

[@ricardovaladez5676]

Cleanest 40g breeder sump I’ve seen. Nice work man

[@pelphrey]

You just changed the game when it comes to building a sump AND using silicone! The mini hockey stick is awesome! I feel like 40 breeders are manufactured specifically for sumps!

[@CoralEuphoria]

Thanks buddy. Keep up the good work and consistency on your channel!

[@Reefahholic]

Abe, great video bro. If you peel the tape before the silicone drys...it’s very easy to remove and produces very clean lines. Painters tape with “edge lock” is by far the best. Best of luck on the next sump build!

[@braveheartreefer525]

Hi Abe top quality job on the sump looking forward to the rest of the 140 build

[@lukaszkeska5170]

Wow! I am amazed! That was very high quality end product with minimum investment. I admire people like you as myself often if I have time I do like to create something from almost nothing ... respect to your creativity. And those tools for moulding and razor. You did very well!

[@jjmccloud]

When they cut the glass for you have them round the corners of bottoms of the baffles, or if cutting yourself just do it then. It makes the fit so much cleaner and allows a little extra room for silicone without worrying about damaging the tanks

[@torreszzzz]

Excellent tutorial! Thank you so much!

[@tonycloseukreef3799]

Great job well executed great forward planning

[@simonmoylan4014]

nice work

[@thepassionreef]

Awesome and simple...thanks for sharing...

[@alexisspencer1192]

Thank you!! This was a great build and awesome video!

[@tankfacts641]

Nice beer choice, love the chopstick tools, great idea. I think I would have drilled it firth through, would suck to crack the tank after finishing. Great build video.

[@CoralEuphoria]

Yeah better in that order. I drilled the hole yesterday. There are a few chips, but it will work. "It's functional and it won't leak" is the nicest way I could describe it lol. For how long I've been in the hobby I should have a drill press by now. I think it would cut down on the chipping.

[@callahanwelsh]

Aloha from Maui!...one suggestion, is to show the final project by testing it with water in it, so we see that it works. Mahalos and aloha from MauiWaui!

[@CoralEuphoria]

Next time!

[@ultimatefishkeeping]

Great Job, well done. It looks fantastic. 👍

[@zacharysergent9011]

Just wanted to say the GE silicone can definitely be used to build aquariums. I’ve built a 180 gallon 6x2x2 with this silicone and it has been running for 2 years.

[@maxpowerdog]

Looks like a nice e39 in the background! Props. Nice diy on the sump. Finally found a use for those chopsticks :)

[@South-Texas-Drones_5801]

Great video 👍🏽

[@tonyv3793]

Very nice work. Most DIY sumps are a mess.

[@fedeuma]

Nice sump! What’s the exact size of the glass baffles?specially the width.

[@CoralEuphoria]

Hi, 17-3/8”

[@fedeuma]

Coral Euphoria thanks for getting back to me! Also, miss your vids and just want to say I learned a lot from your vids!

[@HeathenHammer123]

you got a great deal on that 40gal breeder

[@reynaldodelgado3952]

Hi.can you send me a specs or a diagram for a sump for a 125g tank?

[@drumerzach1995]

What are the measurements for the glass baffles?

[@CoralEuphoria]

The width is 17-3/8" the height is up to you.

[@jonrenny3107]

Also after laying down a bead of silicone remove the tape immediately to avoid it being siliconed to the glass

[@brothergas1260]

U can pull the tape while silicone is still wet just be careful to pull it away so u don’t ruin your nice bead and saves time cutting

[@South-Texas-Drones_5801]

When I built mine I clipped the bottom corners so I wouldn’t compromise the silicone seal on bottom 🤭

[@dobermanguy9437]

You also want to make sure it's safe for aquarium use

[@evangelistakim2055]

👍👍👍

[@regentsaquariums5692]

Attention to details

[@MysticWanderer]

Instead of cutting the silicone on the tank for the baffles to sit flush with the bottom, a better way is to have the bottom corners of the baffles clipped.

[@jonrenny3107]

Cutting the silicone to make the baffle fit is a bad idea. Always cut the corners of the baffle to make it fit flush….