2021 Z400 SPEEDMETAL BILLET BAR END MIRROR INSTALL by BLR TUNING

#Z400 #BLRTUNING
SPEEDMETAL BILLET BAR END MIRRORS FROM CYCLE GEAR
www.cyclegear.com/search?_utf...
you can also find similar mirrors on Amazon for quite a bit cheaper just cannot guarantee how good the quality is going to be these ones that I bought at cycle gear are very high quality.
we do offer tuning work for the z400 models of bikes as well as the ninja 400.
If custom tuning work is something you're interested in then feel free to reach out to me.
If you enjoy the content here on my KZbin channel please consider hitting the subscribe button it helps me out tremendously.
I've created a Kawasaki Z400 playlist you can check that out here on my KZbin channel at the following link.
• KAWASAKI Z400 ER400 KZ400
You can reach out to me or follow me through any one of the following links. I am on all social media platforms.
BLR TUNING Facebook PAGE
/ blrtuning
ME ON FACEBOOK
Bill Ramseyer Jr
/ biggdaddy007br
Twitter
@billramseyerjr
/ billramseyerjr
Instagram
@BIGGDADDY007BR
/ biggdaddy007br
snapchat
@BIGGDADDY007BR
KZbin
BILLRAMSEYERJR
m.kzbin.info...
Xbox-1
HONDA250XATV

[@BLRTUNING]

PLEASE SUBSCRIBE TO THE CHANNEL IF YOU ENJOY THE CONTENT. SUBSCRIBING HELPS OUT TREMENDOUSLY. THANK YOU FOR WATCHING. MY PRODUCTS ARE AVAILABLE ON MY ETSY PAGE. USE CODE BLUEDRAGON10 AT CHECKOUT TO GET 10% OFF YOUR ORDER. Check out my ETSY shop here. www.etsy.com/shop/BLRTUNING

[@tomobrien2628]

Looks great bro, thank you for the video

[@BLRTUNING]

No problem glad it helped

[@windows22100]

Cool bike 👋👍

[@confusedoutlaw310]

Thank you very much for the video 😊

[@BLRTUNING]

Glad the video was able to help you out

[@ThatsFactsBro]

9:14 i like that little motion u were doing😏😏i mean, thanks bro, my bike was hideous before this video

[@joshuasteoger5624]

Thanks so much for the video. My bike looks so much better.

[@dmvbenz7536]

I have the same exact bike same year and color way, def need these mirrors cause the stock ones are ugly as hell, def wanna get a new exhaust and a tail tidy too

[@BLRTUNING]

I do have a Etsy shop and we do carry the tail tidy it eliminates everything underneath the rear end.. I do have an installation video for it here on my KZbin channel. You can check out my Z400 playlist there you will find all of my Z400 videos. And go check out my Etsy shop we have a Halloween sale going right now if you use code HALLOWEEN13 at checkout when purchasing two or more items you get 13% off... Maybe grab a tail tidy and some earrings for your girl. We only ship in the US... So if you're in the US go check out the Etsy shop... Check out my ETSY shop here. www.etsy.com/shop/BLRTUNING

[@t2deck]

Super helpful👍🏻👍🏻 did you find a replacement for this clamp or to cover the hole? 9:29 on your video Thank u

[@BLRTUNING]

I happen to have one laying around that I used. If you look up Kawasaki mirror standoff delete you might be able to find them. I have no clue where I even got the one that I found laying in our shop.

[@prometheusWildlife]

what part number is it to replace the thing that sticks out that attaches to the levers on both sideS?

[@BLRTUNING]

Not sure exactly what you're talking about

[@vintagecolorvision]

The nubs don't bother me, but do you know what thread/size of bolt would fit into the nubs? I'd like to just "cap" them off basically so water doesn't get inside after removing the mirrors. Thanks for the video. This is a great guide.

[@BLRTUNING]

I do not know the thread size

[@GoldenRoseRecords]

How the hell did you remove the bar ends so easy mine are glued like hell lol

[@toxic_monkey6392]

bruh fr i can’t get them shits off

[@rexcasey9116]

@@toxic_monkey6392 did you ever get them off? I still can’t get mine off idk what to do

[@toxic_monkey6392]

Rex Casey make sure you’re pulling the right way/ the right size wrench. I had to pull really hard but it eventually came out

[@SquiggleSquared]

My bar ends are stuck on. :/

[@BLRTUNING]

Lots of people are saying that there's our stuck perhaps maybe I just got lucky. What you can do is hold a soldering iron right on the head of the bolt that way you're only heating up the bolt and you're not going to melt a bunch of stuff. Heat works really good with this type of loctite that they use. Get the bolt hot enough to where if you touch it with a drop of water on your finger it sizzles. Then try on threading it. I've seen that work a few times we've had to do it here at our own shop

[@SquiggleSquared]

@@BLRTUNING no I actually got the bolt off but it's stuck in place, I'm afraid to hammer it hard cause I don't want to break anything

[@BLRTUNING]

@@SquiggleSquared heat works really good

[@MH5tube]

lmao Invicta

[@BLRTUNING]

What's wrong with the Invicta?

[@Try2KeepUpK]

I really want to delete the mirrors but dont want to leave a nub to smash my helmet on... sigh... gotta wait i guess

[@BLRTUNING]

I work on a lot of bikes so I got lucky and found some pieces of that back brace from another Kawasaki model that don't have mirrors so my bike no longer has the nubs at all

[@totalwarpersia9292]

is there no way to keep the sliders ?

[@BLRTUNING]

If you talking about keeping the handlebar sliders with the mirrors I don't think so. But maybe,,, I didn't try it

[@totalwarpersia9292]

@@BLRTUNING Okay thank you! amazing content btw! helped me a tonne 🙏

[@BLRTUNING]

Glad I can help and thank you for subscribing to the channel