Seller Couldn't Start This Rebuilt Quad So I Got It CHEAP

[@RAKINAUS]

sitting here bored in AUS and bang, Joe punches out another machine, thank you sir.

[@Ajaxaxxess]

Waking up here in Northern MN, Coffee and bam Joe "The Machine" drops a vid!!

[@ViewlessSquid]

Watching the sun rise here in Stamford Connecticut with a coffee and bam! Joe has again conquered the unconquerable.

[@neutonrenda2303]

I wish you and Jade a wonderful Christmas and New Year full of love and laughter. ❤

[@coltwinchester6124]

Don't forget Vinny😊

[@MadNath]

Trust you more than most bike garages I have put my bikes Into

[@neutonrenda2303]

Awesome diagnosis again. Thank goodness the valve was not bent. I actually jumped when it started, was not expecting it to be so quick.👍❤️

[@clivewilliams3661]

The was a very good reason that Yamaha used a full compliment of bolts on the inlet cam bearing carrier. Without one of the bolts the engine may not last long and I pity anyone who buys it with the missing bolt. I fail to see how anyone would ignore replacing the missing bolt. All the remaining problems with the machine are quite minor and easily fixed.

[@randoir1863]

It's always fun to watch you tear down and rebuild stuff !!!

[@donscott6431]

I laughed when it backfired out of the exhaust. You jumped forward, turning your backside towards it, like, “shoot me in the back”😂🤣

[@petershute3580]

You just keep banging out the new projects Joe,well done

[@bryonshuttt436]

Your new camera view is awesome!!!

[@rushedscheduledfun3963]

Are there any broken atv in your area anymore? You seem to fix them all. You seem to turn them around faster than the dealership can. Great content.

[@Odder-Being]

In my country (Netherlands) i live on the country site but i think for every 1 add here dirt bike quad what ever he must have like a hundred adds where he lives.

[@brianmckenna3440]

Another great video Joe good luck with the rest of the build

[@nickgruber2593]

Man Joe love the content. You’re everywhere. Really would like to see a Suzuki lt80 one day on the channel

[@almostthere2024]

Sounds like your LT80 is parked up?

[@minnesotatomcat]

Do you have one you can’t fix or why do you comment that on every video? 🤣

[@martinstone3656]

Nice to see the bikes and still getting over that beautiful Honda quad you built, watched it many times as the sound is incredible, on another note where is the dog, not seen him for sometime now

[@debcamp2359]

She fired up with a bang! Great job!

[@johnbarucky6424]

Keep hammering em out

[@Ajaxaxxess]

DAM JOE!! Dont you sleep bro!

[@charlesgraham9954]

love watching u succeed.

[@danielhayton9438]

A good backfire to wake up the engine (and the mechanic!)😁

[@Dan-x7r]

Have a merry Christmas and a kick ass new years for you and yours joe . Also give Vinny a pet for us over here in my .

[@ZenWithKen]

Don't forget the plugged jet / no accelerator pump, so four issues. Odd that someone would build a top end and not know about timing as well, but who's to say it wasn't one of the others that looked at it? Thanks for sharing!

[@EpicATVvlogs]

Needed something to watch 💯🔥

[@marktroiani5401]

KZbin is diabolical with the ad timing 😂 2vintage is legit give us some ice fishing videos

[@Steven5teven]

So sorry for laughing @49:30, That did make laugh!

[@CJRSBK]

Doesn't look the best but its a very quick quad ...great video

[@MitchDaRealist]

Nicely done, sounds great 👍

[@bryonshuttt436]

That crackes me up how you get a machine running so easy and then the seller watches you ride it pretty quick 😂

[@delkellarjr.3116]

Love all your videos brother I learned so much from you thank you and God bless you all.

[@terrypack7537]

Another successful project, great job. !!

[@Hootman865]

They always look better when they run. That one sounds sweet

[@robertcraft-pj2jp]

Awesome job Joe 🇺🇸🇺🇸⭐️⭐️⭐️⭐️⭐️

[@banefamily85]

Thanks for the awesome videos!

[@jsvallee567]

well that was a nice quick and easy fix !!

[@03rrrider64]

Saw ya jump when she fired off Excellent as usual

[@davidmackee8575]

Did you replace the missing cam bolt? Great video ...

[@hoytkenneth09]

Joe please clean that red & White checkered floor 😂😂😂😂man

[@laurencehastings7473]

Just hope he did everything right on that top end rebuild.

[@AnatolyNguyen]

my form of asmr and background content while i study frfr

[@WalterThayer-r7n]

Sounds good Joe 👍 have a marry Christmas u and your family

[@jeffmckc2081]

You should add a cylinder leak gauge set up to your diag. Then you would know where its leaking compression from before tear down.

[@DavidMacPherson-ob8bc]

BAMG she is running 😎

[@Gary-g3q]

Great show Joe, Is Vinny on vacation? 😅

[@av8or971]

bad shim, and out of time. the easiest things to check.. good job Joe

[@Motoxr32]

You need to get a groove life silicone wedding band to wear. As a mechanic speaking, they are safer when working and riding. Keep the metal one in the safe for special occasions 🙂 Keep your finger.

[@rodneysmart9774]

My boss made himself a titanium ring. After an accident in the shop I had to cut it off to save his finger. It was messy, but he never stopped makin jokes. Friggin Canadian.

[@Nine_883]

I would hate to watch your videos after I sold you a running bike that I screwed up trying to be like you. 😅😅. Although you keep things simple as possible it’s only easy to keep it simple when you know what you are doing.

[@bogganalseryd2324]

Man it suxx when you rob us of the moment it starts lol 😂

[@KentRoads]

he didnt?

[@DjBud_VinD]

Great diagnosing and fix again, love it. hi5

[@michaelbratton3319]

Should soon be snowmobile season I'm thinking?😂

[@toothfairy2353]

Even I was relieved when the engine finally had compression 😂

[@Frostyli0n08]

I laughed out loud when it backfired😂

[@mikeymike1705]

And BOOM, she starts!

[@jeffmckc2081]

The missing bolt. "If four will hold it,,, three outta!"

[@empiresrikesfat]

Hiding anything special for a Christmas video Joe?

[@byronjuen616]

Now I know what a bucket and shim are.

[@handsolo6241]

Sparks exhaust is sweet.

[@davescheer5038]

🌴so I’ve been watching for awhile setting on the side lines , you seem to have a kinda check list on problem solving non running projects , when you buy one much like this quad these are the ones that are scary as the previous owner said he rebuilt it and can’t get it running , you really don’t know his capabilities, skills, knowledge of mechanics, plain and simple it’s a crap shoot , but this is what make your vid’s so cool even if it does get running it could come apart on ya on the rest run , 😏

[@carriecantrell8512]

Check out RMStator they have a Stator upgrade kit that changes all the charging system and moves the lights to DC voltage works awesome a must for the older YFZ’s. Would make a great install video. Merry Christmas keep up the good work.

[@BrianWetzel]

Merry Christmas Everyone 👼

[@aarongrabowski3775]

I had seen enough when I saw the wire nuts 😂😂😂

[@nicktasker4287]

Nailed it 👍

[@james-dt4ei]

When u going to do a complete rebuild on a quad. That is what we have been waiting for for yrs

[@08shunter]

Just a heads up to all you 2vintage fans. Check that you are still subscribed to Joe's youtube. I watch everything Joe puts on his channel and love it, but. today I found I was mysteriously unsubscribed. This apparently happens with youtube so, check you are still subbed.

[@YFZ_BRENDO]

Just looked I'm unsubbed too tf?? @KZbin

[@rodneysmart9774]

I checked and I also was unsubbed. Thanks.

[@thewhitestjamal]

Weird. I was as well. I subscribed a long time ago. Does that impact revenue? Every video he posts it gets suggested and I watch almost all. Didn’t even notice.

[@kevinalbers1084]

How can I tell? I dont see a button.

[@08shunter]

So glad I mentioned it, not sure what impact it has on Joe's channel. @2vintage Joe if you read this maybe have a word with YT about this.

[@allancunningham6019]

Show are Vinny next video please Joe 😊 Hope your all keeping well

[@RobertHislop-bn9xz]

Amazing knowledge wow

[@petershute3580]

Should never wear wedding rings around DC power it will take your finger down to the bone,it’s just good practice to not wear them when working around moving parts dc current is worse than AC it’s deadly I’d rather get shocked by 120v ac than 10v dc stay safe Joe & Vinny

[@thebigguy8306]

Nice quad, your skills, and patience pay off long after most of us would have spent $$$ to repair or set fire 🎅Merry Christmas and Happy New Year, to you and yours. Did you get Jade an Oil Filter Wrench? 🍻🍻To a prosperous 2025

[@travisconover4762]

Videos are 🔥 🔥 🔥 ❤

[@Rick850angler]

I wish I was your neighbor lol…🇺🇸🦅👍

[@dubloduce]

54:12 Wisconsin OH YEAH

[@seansysig]

Joe did you find the missing bolt on the head?

[@johnb5519]

I can just picture the guy and his buddies standing around trying to figure out why it wouldn't start.

[@bobwalton4879]

What were the two yellow electrical wire nuts for? Maybe an electrical issue?

[@danelldecker3696]

Nice video.

[@marlonward758]

How did you learn to do all of this??

[@sifaplusamical]

yeah probably dad and mates or watching videos on KZbin

[@aaronrichards5814]

His grandfather that passed not long ago. He did a video on one of his bikes

[@richardnunn3205]

Joe has the ability to break things down into simple parts and work to a system of methodical diagnosis. Spark, Compression and Fuel. Once you find the main cause, simply investigate in progressive steps until you work out the issue. Joe is great at providing a commentary on these steps. Acquiring a beat up machine which has a dubious history means he has to be thorough in diagnosis, taking nothing as a given because previous repairs by previous owners can be disastrous. Take little notice of a seller saying "it just needs a carb clean". One of Joe's great strengths is his ability to understand electrical systems and fault find. He understands how things work and therefore determine where to find the fault.

[@TheBrookian]

49:21 Not gonna lie. That made me jump.

[@davidingling9791]

Beater quad but I'd ride the heck out of it!

[@donprater2754]

Awesome!

[@frankwilliams2198]

Those YFZ450's are complicated that's why their always winning championships.

[@Andy_Hinners]

53:00 We didn't just hear a bang, fire shot out of its *ss.

[@sanad-jk9bj]

its a sparks exhaust

[@jerrymarshall2728]

Joe, could you start calling the knob on the carburetor a 'choke', when it's an enrichment circuit? A choke is a plate closing the carburetor inlet. Just trying to help you make better content. Merry Christmas to you and your family! 🎅🎄😴

[@shadow7796]

Every mechanic or rider/driver/operator that I've ever known commonly calls it a choke. Calling it an "enrichment circuit" will get you looked at funny. Most even have the word "choke" printed on the knob. That might be what an engineer or designer would call it when speaking to other engineers, but using that term around anyone else just makes someone sound pretentious. Everyone just says choke in the mechanical world.

[@nickdee1913]

How garage fulls of bikes, Atv’s quad’s snowmobiles do you have ? Hope you sell a few now and then

[@grahamwilman1896]

Question Joe, I am still absolutely dumb when it comes to engines although I've learnt a lot from watching your videos. When it comes to the valves how do you know when to change the shim instead of adjusting with a spanner and screwdrive

[@shadow7796]

If it has shims, that's the way to adjust it. If it does not have shims, it will have an adjustment screw on the top of the rocker arm and no shims. For example, my Honda Rubicon does not use shims. It only has adjustment screws, which is much easier and faster to adjust. These do need to be checked and adjusted more often. Usually, the higher performance-based engines will have shims. The engineers figured that on high reving engines with more compression and dual cams, there's a chance an adjustment screw could potentially come loose running at higher rpm's. Adjustment screws work just fine for trail and work machines that don't see racing conditions or run at a continuous high rpm. I'm 48, and I've been around atv's all my life, and that's the way I've come to understand it. Hope it helps.

[@craigmorgan4676]

Early vlog,love it Joe quad looks interesting!👌💪👍💪🤝🇬🇧🇿🇦🇿🇦🇿🇦🇿🇦

[@KcY-u2o]

Ive never heard you say your name is Joe how does everyone know your name

[@CarlMarkusHey-ih9jm]

Thats what you get from paying attention

[@minnesotatomcat]

Do you have a twin brother or how do you find the time to do all this?

[@Meza-m6k]

I have one of these w a gsxr750 engine in it

[@davessparetime83]

The timing was off. The chain was tight. He could have just cranked in the tensioner without collapsing it. Center Intake shim was tight. He could have just put the valve cups in wrong spots. Did you ever put that missing bolt in?

[@bryonshuttt436]

Or check the oil like you always do?

[@AcidTechnoMan5000]

What a horror show. Some people should just not pick up a wrench, ever. Good job sir.

[@johnb5519]

What about that missing bolt. The threads are probably stripped out.

[@MultiCutaway]

Just a suggestion from a subscriber.... instead of spending a quarter of the video running up and down with a repaired machine, why don't you spend it with cleaning and painting? It will look so much better.

[@finster7582]

BAAANNNNGGGG !!!! 😃👍👍👍👍👍👍👍👍

[@MatthewH0785]

#513 😂

[@bryonshuttt436]

Why didn't you losing the chain

[@andyredvolvo9434]

#10👀👌🏴󠁧󠁢󠁥󠁮󠁧󠁿

[@bryonshuttt436]

What can't you fix!!¡!!

[@ForeverARaver2000]

Happy Days Joe Has Posted 🔥🔥🔥

[@OfficialBaconDev]

Buy a Taiwanese quad bike I have one!

[@Chevychild]

😊

[@bryonshuttt436]

You need to learn how to wheelie instead of doing burnouts and donuts lol