BRAND NEW CAR ! SUPER CLEAN DENT REPAIR | Step By Step How To Tutorial

This is the BEST "HOW TO" PDR video out there!😬
Hi thank you for checking out my latest repair video, This time I’m repairing a Brand new Ford Fiesta ST-3 Front Fender (Wing)
The damage was caused one windy day when household bins where due to be emptied. The empty and light bin was blown over into this beautiful Fiesta ST making contact with the panel and creating this bad dent
This dent had a sharp crease in the centre and it took a while to complete BUT the amazing clean results speak for themselves
This dent was great to repair and i wanted to show YOU how a PDR is carried out, i took my time to capture the full repair and explain what i was doing along the way.... I hope you enjoy and learn from this video and please SUBSCRIBE if you did!
I hope you can take away some information from this if your a new dent technician or really interested in the job.
If your a potential customer looking for an accountable technician then I hope you are happy with how we operate, you can see our many repairs and this will give you the peace of mind when booking your repair in. We repair many customers vehicles up and down the country, we are in Beverley and we set aside all the time in the world and look after you if you travel to us.
Paintless Dent Removal or PDR is a method of removing minor dings and dents from the vehicle bodywork without the need for filler and paintwork. This is a highly skilled process in which the dent(s) is massaged from the rear of the panel or sometimes from the front using glue pulling methods.
Join this channel to get access to perks:
/ @dentremover01
------ Chapters------
00:00 Intro
00:38 Explaining the damage
02:53 Tool choice
04:31 Starting the repair
06:42 Using fender pliers
12:39 Repair under the bodyline
14:43 Knocking down the high spots
16:28 Changing direction of repair
19:05 Getting serious! Sharp tips
20:06 Finessing the panel
21:43 Nearly finished the repair
22:14 Check the super clean repair
23:05 Customer testimonial
23.12 End screen
-----------------------------------------------------------------------
Repaired, Edited by Martin Sadler
Filmed by Martin Sadler & Alastair Robertson
Please SHARE this video and give a LIKE & SUBSCRIBE to keep in touch with all the latest videos…
For more information on what we are about
www.dent-remover.co.uk
All Soundtracks by Epidemic Sounds
Under Licence
--------------------------------------------
See you soon
Martin
#DentRemoverBeverley #PaintlessDentRemoval #youtube #EastSide #pdr #howto #ThoseDentGuys #fordfiestast #frontfenderpdr #denttrainer #DentRepair #cardetailer #automobile #repairShop #DentRepairUk #PdrVideos #MobileDentTechnician #imiCertified #dentVid #pdrTech #pdrTechnician #HullDents #IMI #HullDent #MartinSadler #kecoUK

[@dentremover01]

This is the best video I’ve ever made! If this doesn’t do well then I quit ! Lol 😂🎉❤

[@DK-ki2fh]

The quality of work is the best I've seen. Just insane 🔥🔥🔥🔥

[@dentremover01]

Thank you DK 🙌🏼

[@villoch2006]

Wao i love your job i live in miami and back in the days i just to know and argentine guy was the only one he open the school the dent wizard I’m getting older and i want to learn. Thanks so much.

[@villoch2006]

I live in Miami fl USA and back in the days I used to know and argentine guy lido valderrama he was the only one he open the school dent wizard im getting older i want to learn for real congrats you are one of the best.

[@dentremover01]

Thanks for your comment and hope the weather is fine in Miami? I don’t know the name of the dent guy but I’m aware of the dent wizard and I believe they are still going strong If your interested in PDR then there is an Expo PDR event at the end of January 2025 in Orlando (Gaylord palms) Get yourself there and meet all The techs etc il be there too 🙌🏼

[@michaeldodson879]

This whole process has fascinated me for years. Your expertise is so evident and your videos really display that. I absolutely enjoy them all. Superb display of a master sharing his knowledge. Thanks!

[@dentremover01]

Thank you so much for your great comment and I really appreciate your kind words

[@massimo6770]

I've always hated windy days... they usually end up with a sore throat or a dent. Thanx for this great video!

[@dentremover01]

Thank you matey! Or headache from the wind noise! Always seems like your rushing around when working in windy weather!

[@thrustmeister]

Another quality job on a nice looking motor.......10/10 Martin👍

[@dentremover01]

Lol thanks Blobby man!!

[@mindaugasvaicekauskas9377]

Very well done Martin, top notch! It's nice that you have the patience to present it all beautifully to us. Thank you.

[@dentremover01]

Thank you sir 🙌🏼 my pleasure

[@dentdetailpdr]

Excellent video as always martin, so much time and effort goes into what you do!

[@dentremover01]

Thanks Graham appreciated 😊😊

[@SalvageMasterEssex]

Perfecto! Another first class repair 👍👍

[@victorbarranca2910]

Outstanding work,

[@draganjovanovic7698]

You are very,very patient in this fantastic PDR art! It is really magic work for me! Thank you! Dragan from Serbia

[@dentremover01]

Thank you so much Dragan 🙌🏼

[@gregio6295]

Amazing I made myself a small kit and tried to do it but failed, takes talent to do this work.

[@AlexandrT48]

Brilliant result

[@callumsharp1863]

Stellar job as always martin thank you!!🍻🤝🏼

[@dentremover01]

My pleasure I enjoyed the full job and edit

[@guystreeton5274]

Fantastic work 🙂

[@snapfhish]

Awesome work !

[@dentremover01]

Thank you! Cheers!

[@G10Jon]

Excellent video and excellent job !

[@i2eactl0n]

Wow, such amazing work. Im binge watching all your vids. Great work 👍🏼

[@dentremover01]

Amazing! Thank you so much. So sorry for the late reply. How did the binge go!?

[@keymad4]

perfect as always.

[@tracydaniels2982]

Another great video Martin!

[@dentremover01]

Thanks Tracey!

[@damianstones6975]

Another brilliant job 👏🏻

[@dentremover01]

Thank you Mr Stones

[@neilfreemantle3392]

Perfection... and what a beautiful colour

[@dentremover01]

Thanks Neil and yea! Perfect colour!!

[@pablo123b]

excellent stuff

[@Andyc515]

Wow, outstanding job

[@dentremover01]

Thank you Andy

[@oldgitsknowstuff]

Keep at it...people are taking notice. Quality is like a good wine, it takes time to mature...

[@dentremover01]

Thanks!

[@alistair4912]

Excellent repair as usual! Which glues do you use and recommend for glue pulling? A dedicated video on which glues you use for different size dents and different seasons would be great!

[@tonym6920]

You’re an artist Martin, excellent work. Cheers!

[@dentremover01]

Thank you Tony. So sorry for the late reply! Merry Christmas, happy Easter!!

[@1st_track_dents]

You only did this car because it matches your company branding colours lol! 😂 No, but seriously great video mate 👊

[@dentremover01]

Hahaha your nearly right!! Thanks Jake your comments are always greatly received!

[@1st_track_dents]

@@dentremover01 Sorry I missed your Live appearance on Myke & Joes show! You should have told me you were going to be on there... I would have given you and Graham a shout! I had my head buried in my editing software 😵 just watched some of it back, I though you were going to die at one point choking! 😂😂😂

[@andyrazzell1080]

Fantastic video as usual Great how show tools used 🔨⛏️👍👍

[@dentremover01]

Thanks Andy! Every vid gets that bit better!

[@kenmcconnell4148]

Superb workmanship, great video and camera work & detailed explanation of the process, i will order some basic equipment & try to remove a few simple annoying dents in an older car, this is difficult work that if done wrong could be made much worse so some pressure to remove a tricky dent in this new car, that light with the lines is fantastic

[@dentremover01]

Thanks Ken. Go careful and please practice on very small, soft dents until your 100% confident to work on your new car Get yourself a scrap panel (not Ali) and a dark colour to practice on

[@ronwebster4764]

Great vidio and going that extra mile too. Bob on 👍

[@richardthepainter]

amazing as always very informative great video

[@dentremover01]

Thank you! Appreciate your kind words

[@ridenfish39]

Fantastic work ! Subbed

[@dentremover01]

Thank you 🙌🏼

[@gochamakharadze799]

This is exactly the high level of professionalism 😎😎🇬🇪🇬🇪

[@dentremover01]

Wow thank you Gocha I really appreciate your kind words 🙌🏼

[@gochamakharadze799]

@@dentremover01 ❤️❤️

[@bigfoottoo2841]

Amazing

[@dentremover01]

Thank you

[@simonebusselli1717]

Sei un grande 👍👍👍👍👍

[@LxGL82]

Привет Мартин! Отличный ремонт получился! Подача материала как в студийных шоу! Молодчик! 🙂👍

[@dentremover01]

Hi Alexey большое спасибо и я рад, что субтитры работают 🙌🏼

[@prebaned]

Pretty good.

[@dentremover01]

Thank you 🙌🏼

[@jamesmarques7245]

This is effective, I like it👍 But I don't have the patience, I know how to do body work and paint.

[@dentremover01]

That’s a start James. I didn’t have patience when I started.

[@oldgitsknowstuff]

Nice video... A brand new car.....the owner would be very upset, their 'pride and joy' ruined by a runaway wheely bin ! The repair has to be of the highest quality so as to restore the car to it's brand new condition. If this was MY car I would be happy with the repair. It looks right and when the customer washes the car it will feel right. Consider how much it costs to repaint a panel and even then it will not be an exact match. Your Customer feedback at the end of this video was too short to read, you should give it at least 10 seconds...

[@dentremover01]

Thanks !

[@miguelcjr11]

In the states a moose knuckle is something waaaayyy different 😳

[@krzysztofbabiracki4638]

Mistrzostwo świata Martin, jak długo naprawiałeś to wgniecenie pozdrawiam Krzysztof Poznań

[@dentremover01]

Krzysztof Poznań… I hope this is correct translation z dziękuję! Mam nadzieję, że wygram, nigdy nie wiadomo, ale szczerze mówiąc, facet, który wygra, Zan Vidic jest wspaniałym technikiem i życzę mu powodzenia! Będę zadowolony z top 5! Dziękuję Ci

[@Neilukuk]

@@dentremover01 Did Zan Vidic train you? If not who did and how long did it take before you passed whatever training course you need to do? Thanks

[@dentremover01]

@Neilukuk thanks for your comment. I self taught 😀 I was a panel beater and just practiced on cars everyday until I didn’t have to fill the damage anymore I know Zan he’s a great guy and a super Technician he wins everything!! It took me about 3-4 years until I was confident to repair anyone’s car. But with proper training you can repair small dents within a few months if you have the time and focus Good luck 🙌🏼

[@Neilukuk]

@@dentremover01 Thanks for the info, I appropriate! I hope you have a great night and take care.

[@cbattman]

Great repair as always Martin...How did you get on in the Dent Olympics at MTE??

[@dentremover01]

Hi Caspar thanks for your comment. I did great at the competition but I didn’t get into the top 5 I have a video on my repair coming soon, I did a great repair and it was a sellable repair in my eyes. Some of the other repairs where very noticeable. Il be back to compete again as I really enjoy it.

[@cbattman]

@@dentremover01 Excellent mate well done. I watched a feed (might of been Tom) with you tapping away in the background! You were up against it mate, I think the winner got the Ukrainian sympathy vote maybe 😉 I'm tempted to double up by going to MTE next year and possibly testing myself by entering the new techs competition for under 2 years.... But it's a big leap as I don't work in a body shop and all my practice is on my own etc.

[@dentremover01]

Thanks Caspar, to be fair the results where all independent and they didn’t know who fixed the dents The beginners dent was a 3” crease on a bonnet and it looked quite a handful! Il be back again so your welcome to contact me and Il help out with any tips if your a new tech

[@cbattman]

@@dentremover01 That's interesting to know! That's a kind offer Martin, appreciate it!!

[@neil3589]

That’s an amazing change. Can this process be used on classic cars with thicker metal?

[@dentremover01]

Hi Neil thanks! Yes PDR can be used on all cars. Classic cars often have ticker and brittle paint and maybe filler so it’s quite common for the paint to crack when the dents pushed out. But every dent is different so I’d say try it first with a good local PDR tech. Do you research on them and ask for a visual estimate

[@neil3589]

@@dentremover01 thanks very much for coming back to me. It’s very therapeutic watching the dents slowly come out. What a skill

[@cholomondeleybiscuitt]

Can this same issue be sorted on a wing with PPF?

[@dentremover01]

Yes. Just with care

[@chrissalgado6259]

Sorry for my English but what’s the name of the tool that he used for take the dent, he Puring a part of the took in the tire, he used the tool inside the fender. I don’t know the name can you help me ?

[@dentremover01]

Hi Chris It could be a “DoDa” or a “Moose Knuckle”

[@miguelsumoza300]

How much you charge for Dent like that in UK

[@dentremover01]

Hi Miguel A dent like this would be a couple of hundred to repair

[@myxsin]

Гап йуқ

[@dentremover01]

Ok sorry!

[@googacct]

What is the marker you are using?

[@dentremover01]

Hi, the markers are from Amazon. Chalk markers? You can get them in lots of colours

[@googacct]

@@dentremover01 Thanks. I had never heard of them before.

[@dentremover01]

@googacct which video are you commenting through? Il add a link to buy them later for you if you like ?

[@googacct]

@@dentremover01 It is the one from about 9 months ago. BRAND NEW CAR ! SUPER CLEAN DENT REPAIR with the green car, but I noticed you using them in several of your other videos. I did find them on amazon and ordered a set to test. I was a little confused at first. I thought you meant regular chalk, but that did not look right. I finally realized that Chalk Marker is brand name.

[@Gee_goods]

I need to bring my car to you

[@nikpatel16]

Hi mate! Ready for mte?

[@dentremover01]

Just landed in 🇺🇸

[@nikpatel16]

@@dentremover01 have fun! Buy loads of tools!!

[@dannylee9138]

Hey Martin I need some new videos lol , hope all is well with you I have been watching these over and over

[@dentremover01]

Hi Danny thank you so much! I nearly have another video ready I’m just finishing the voice over. Just been really busy with work I hope to have it ready in less than a week

[@kadidouid9420]

شكرا اخي الكريم انشاء الله اتي الى انجلترا نزوراك ان وبن علية

[@dentremover01]

شكرا قاضي. إنجلاند مكان رائع ، بارد قليلاً في الوقت الحالي! يعتني

[@pavelkondratev9006]

👍👍👍🤝👊

[@sega6435]

Хорошо объясняет, только ничего непонятно!)))

[@GunkMedia]

Moose knuckle😉

[@billramsey800]

Well excellent Martin, appreciate the time and effort you put into your videos your channel is all class. 😎🇬🇧🦘

[@dentremover01]

Hi Bill thank you! Appreciate your kind words- hope your house is coming along

[@billramsey800]

@@dentremover01 Have moved in. Landscaping next, thanks Martin.