WILL THIS DENT REPAIR? | Watch Me Fix This Without Painting! By Dent-Remover

[@daleblakemore9821]

Beautiful work Martin, you are a true craftsman.

[@dentremover01]

Thank you Dale very kind of you to say so. Thanks for watching

[@jamesyday72]

Fantastic work yet again Martin

[@dentremover01]

Thanks!

[@markgoscinski3509]

Martin you are a modern Houdini...you make things disappear :) absolutely amazing attention to detail.can't believe what is achievable . The graphics you demonstrate are brilliant showing depth and curvature.

[@dentremover01]

Hi Mark thank you for your kind comments I really appreciate it and it helps me make more vids like this. They certainly take a while to do not to mention do the repair too! Next time I get a bad dent il do another video! Take care, Martin

[@RealWorldPDRTraining]

Your editing and clarity are on another level. I’ve got much to learn about video from you. Much respect my friend. Look forward to more in the future.

[@dentremover01]

Thanks Jim, well same here! We all watch each other’s vids and pick up ideas that’s the way it works! You know where I am if you want any help but I’m sure you will do it no problem! Il get some of yours watched today because it’s nasty outside! Cheers martin

[@DZ32100]

@@dentremover01 Martin you and Jim both are very good on your work. You actually show a lot of detail which others do not but I also enjoy. Jake from Fast Track Dent. He's amazing as well.

[@DZ32100]

I should start having videos coming out this summer 100%

[@dentremover01]

Thanks Dent Zero. Looking forward to seeing your vids. Hope ours help and give you ideas to create your own. I get my ideas from Jim, Jake etc and make my own versions. 😊😊👌

[@RealWorldPDRTraining]

Yea just like in dent work, I try to learn from everyone too. Found out awhile ago I was over editing and muddying the message. 🤷🏽‍♂️ oh well, that how you learn.

[@sureshpeshawaria347]

Dear Martin, I've been following your work for some time and am more than impressed... being a penal beater myself (retired now) PDR is something new for me and I still find difficult to believe this is possible - I mean something to THIS level !!! just awesome...

[@dentremover01]

Hi Suresh thanks for your comments and well done 25 years in the trade!! Yes PDr has been around a long time but it’s never really been a main stream method until recently. I’m sure pdr techs have been saving big damage for years but again no one has really pushed their work for others to see. Now with the easy reach of social Media we see these big saves and it really does open your eyes to what’s possible and the amazement that the paint still holds together! I love fixing the big stuff and there’s some guys on KZbin doing even bigger stuff (discount dent) (Brice Kelly, central dent repair) would be worth a look too Thanks for watching and commenting. And hope your enjoying your retirement Martin 🙌🏼

[@shameekbhattacharya956]

Simply awesome. No words of appreciation could be adequate.

[@dentremover01]

Hi thanks for taking a look at my latest repair. This video took a while to make so sit back and enjoy. feel free to leave your comments below and if you havent subscribed all ready then join us and help the channel grow Cheers Martin

[@Kylesweeting]

My man glassing every repair out 😭😭 setting the bar soooo high lol amazing work

[@dentremover01]

Thanks Kyle I try me best and love to show the world what’s possible

[@marekkalinowski6370]

Great job again Martin! Very well detailed video, great for someone starting PDR to see how things should be done properly. BIG thumb up!

[@dentremover01]

Thanks Marek I love to show the repair in as much detail as possible

[@l8er]

Beautiful work my friend

[@dentremover01]

Thank you 🙌🏼

[@pr2u740]

Hi like always your work is absolutely flawless enjoy your videos you are definitely a craftsman thank you for all your time

[@dentremover01]

Hi PR2U FN thank you for your kind words.... I try my best! We are back working now so more videos coming soon for you. Thanks Martin

[@jonathangarcia8077]

Excellent job!

[@dentremover01]

Thanks Jonathan 👍

[@bass69player]

Hi Martin! Thank you for the video! It was really helpful to understand how the process of knocking down the crowns work. Cheers!

[@dentremover01]

Hi David thanks that’s great feedback and I’m very happy I could help you understand Cheers martin

[@neilfinch8331]

You are brilliant at what you do mate love the video s

[@dentremover01]

Thank you Neil appreciate your kind words

[@nikpatel16]

Very clean as usual! I need to get the round inspection line board

[@dentremover01]

Thanks Nik Fleet factors sell them for £40 ish If you want one il get you one and send it down to you

[@nikpatel16]

Dent - Remover Ltd cheers, I will have a look 😀

[@andyjamestf]

Great standard of work 👍

[@dillon84]

Watched a few of your videos tonight, looks like you do a great job. found a lil dent this morning on my os front arch. I will picture message you for a quote tomorrow.

[@dentremover01]

Hi Dillon thanks! And yes sure your very welcome to send me an image il see what I can do for you Cheers martin

[@threeriversdent]

Nice work Sir - that was a lot of pressure at the top, well done

[@dentremover01]

Thank you mate yes that crown was a beast

[@pmdentsolutions6925]

Great repair and very informative video as usual Martin . Thanks for sharing your methods 👍

[@dentremover01]

Hi PM Dent Solutions thanks and no problem at all I’m very happy you enjoyed it

[@rayleighpdrpaintlessdentre1939]

Class work...in a league of your own!

[@dentremover01]

Thank you Raleigh PDR nice of you to say. Cheers Martin

[@dents-b-gonedarwinnt8355]

Another great repair Martin. 👍👍

[@dentremover01]

Thank you Adam 😊✅

[@Ray50d]

As always, i’m impressed by your skill level. Superbe 👍🏻👊🏻

[@dentremover01]

Thank you Ray50d I like to show the full repair where possible so everyone can see the dent doesn’t just pop out Cheers Martin

[@timmygasman945]

only just found your channel, very nice repair, new sub earned. I'm self taught with home made tools and doing good ,although an engineer by trade, done tin bashing and fabrication.

[@dentremover01]

Hi Timmy Gasman thanks! I self taught so I’m sure you will do well. Didn’t have the luxury of good videos back then though! Thanks for subscribing, and hope my vids help Cheers martin

[@scottmckenna2214]

Unbelievable mate yet again 👍

[@dentremover01]

Thanks Scott

[@SamsungA-qn8gw]

Muy buen trabajo !! Me gustan tus videos, lo e utilizado como escuela, muy bueno de verdad !

[@DZ32100]

Martin my friend. Once again you blew it out of the ballpark. Your work never ceases to amaze me. And you're very detailed. Like I said before keep up the good work. By The way where did you get? That big rubber ball tool and the rod

[@dentremover01]

Thanks Dent Zero I try my best and show as much as possible The large rubber ball is just a screw tip most PDR places will sell them, bout the size of a ping pong ball? The ultra dent tools bar is just that, it’s a double bend screw tip bar. Where do you live?(country) cheers martin

[@johnintelisano887]

Beautiful job on a tough dent! 👊👍

[@dentremover01]

Thank you John

[@Foxhound494]

Mate this is incredible, I wish you were over in Australia!

[@dentremover01]

Thanks Foxhound.... Me too it’s blumming freezing here! Thanks for watching and pleased you enjoyed the video Martin

[@erwinss9801]

Halo tuan saya mengikuti vidio vidio tuan saya sangat mengagumi pengetauan tuan tangan ajaib,tuan tolong buatkan vidio teknik dasar untuk belajar pdr dan caranya terima kasih salam dari indonesia

[@dentremover01]

Hi. Thank you for your message. I have a members section where I can make videos like this for your individual needs. Take a look and see if it’s something you’d like to be apart of

[@jacomatos9592]

Very good..I want a INSPECTION board like that please

[@dentremover01]

Thanks Jaco. You can buy these from most PDR shops

[@imranKhan-sb8kt]

Super work sir

[@dentremover01]

Thanks Imran

[@victorb2910]

Thanks for sharing, you do nice work.

[@dentremover01]

Hi Victor thank you and no problem at all 😊👌

[@pdrking8544]

Good job! Finishing lip edge it's a one big nightmare .... In this kind of dmg I lost half or even more time just for doing this edge perfectly. Btw . Nice tips with this vice grip. I will try it :)

[@OutdoorsbushcraftbyChris]

Nice one Mate👍👌😊

[@raugil1mx]

Im a believer now!!

[@dentremover01]

Hi Raul super!! its amazing what can be repaired these days!!

[@kietphuong802]

Love your video, amazing thank you

[@dentremover01]

Thank you

[@andysdentrepairs5148]

Quality repair as always and a great video. keep up the amazing word dude 👍

[@jacomatos9592]

Very good

[@dentremover01]

Thank you Jaco appreciate you watching and enjoying the video

[@fedakgabor5787]

Perfekt!

[@dentremover01]

Thank you Fedák👍🏻😊

[@danzilmack9325]

I wander how long it would take for me to learn this craft? I love watching this work but looks very tricky.

[@АлексШа-б8д]

Добрый день. Всё классно Мастер!!!! Один вопрос, а Вы рессорами работаете. Или только крючками?рессора же, она по увереннее встаёт. Ну хотя у каждого свой подход. Спасибо за видео. Желаю удачи,успехов.👍👍👍

[@dentremover01]

Привет, Анекк, спасибо за ваше сообщение. Я пыталась переводить, но это сложно понять. вы русский? Спасибо за ваш комментарий и за просмотр. Я очень рад, что вам понравилось.

[@АлексШа-б8д]

@@dentremover01 привет да я из России. Ну ничего страшного. Я ваши видео и без перевода смотрю всё класс. Единственное для чего все время замеряете повреждение, для себя, или так нужно и в этом скрыт какой то смысл?

[@burtyboy2792]

Top quality work mate i have been in the motor trade for the last 10 years as a prepper painter and you have got a good name for your self in and around hull. I'm just getting in to pdr my self do you do training ?? Iv always liked the thought of hail chasing i know its a long way off but ill get there.

[@dentremover01]

Thank you Burty Boy. Do you live/work around Hull East Yorkshire? I I ve not looked at training as yet. I self taught so if you got a door/bonnet to practice on you could save yourself some money

[@kellyhaugland5653]

Very nice

[@dentremover01]

Thank you Kelly

[@raymonddignon399]

great job as always! where did you buy the do da tool? thanks

[@dentremover01]

Thank you- www.tdntools.com have some in now... be quick though as they only had a couple left 😱

[@nicoparry5812]

Amazing work, were abouts do you buy your tools from?

[@dentremover01]

Hi Nico, I get my tools in the uk from KecoUk

[@OnubaDSP]

Hello Martin good night from Spain .... I follow your videos and I really like your work ..... I have been a professional painter writer for more than 20 years ... and I am learning the techniques of rods and pdr .. .... sorry for the indiscretion but can you tell me how much you charged for this work ???? ... ... thanks .....

[@dentremover01]

Hi Miguel thanks for your comment and we’ll done for getting into PDR I’m sure your painting knowledge will help you learn PDR quicker. I don’t like to give exact figures out because every repair is different based on the damage etc Was less than £500 if this helps? Cheers Martin

[@OnubaDSP]

@@dentremover01 here in Spain to repair and paint that fender would cost about € 200 and it would take about 4 hours to do the job. Do you work with insurance companies or are private clients ????? ......

[@dentremover01]

Hi Miguel, I think you could get more than €200 for this, what’s the other option? Repair and paint, blend the bonnet, bumper and door? Also I think it comes down to the individual customer too. You need to charge what your comfortable with for spending the adequate time on the job to get it as good as. I bet there’s guys in the USA would charge 800-1000+ for this I’m mainly private/retail but will do work for anyone aslong as I get paid pronto

[@franciscoramos226]

A BIG thumb up for another info video, Martin!! 👍👏👏👏

[@dentremover01]

Thank you Francisco 👍

[@peterpark4818]

Wow perfect😍

[@dentremover01]

Thank you Peter 😊

[@billramsey800]

Hi Martin your not Dent Remover you are the Dent Whisperer, well excellent could use your skill for trade negotiations with the EU great work.

[@dentremover01]

Ha I bet I could bore them to death! I hate the sound of my voice I’m glad you liked the video!

[@jimleahy4646]

What's the time scale on a dent like this start to finish ?

[@dentremover01]

Hi Jim, this repair took me about 4 hours with the camera time etc It certainly was a tought dent to do Cheers martin

[@jimleahy4646]

Very impressive thank's for the update Martin.

[@dentremover01]

Thanks Jim😊👌 take care

[@Mario-zn3hp]

Good morning, how long did it take you to repair ?

[@dentremover01]

Hi Mario thanks, I think it took 3-4 hours to do

[@stephanietrujillo5406]

How much does a repair like this cost?

[@rine413]

What do you charge for something like this?

[@alg9759]

If I want learn this job ,what's name of this diploma please 🙏 ?

[@paulmarks8890]

What’s the name of the tool you put on the tire

[@dentremover01]

Hi Paul, thanks for your question. It’s called a moose knuckle Cheers martin

[@paulmarks8890]

Dent-Remover Thank you dent remover I really appreciate it

[@raugil1mx]

I need you to come to mexico to repair my Doors!!

[@turgutcomert2436]

Hey dostum bana bu işi öğret istanbuldan selamlar

[@salahgwarif3015]

ياريت الترجمةبالعربية😅😅😅😅😅😅

[@ferdicaldagi]

Cıtır hasar

[@kursad759]

Büyük kesin hasar diye başlık açmış usta. Türkiye de yapılan hasarları ellemez bunlar

[@dentremover01]

Thanks guys

[@Bullator]

Please take it to your job, I'm ready to work for free)))

[@dentremover01]

Thanks for your comment