Carbon Fiber Delamination Bubble Clear Coat Repair - Lexus RCF Vehicle Door/Window Button Panel DIY

  Рет қаралды 532

Jonathan Morgan

Jonathan Morgan

6 ай бұрын

The carbon fiber door switch trim panel cover on my Lexus RCF delaminated. This resulted in large ugly discolored air bubbles under the epoxy or clear coat. Instead of purchasing brand new parts, which would have cost a few hundred dollars, I attempted a DIY fix. In case the repair did not work, I could always simply buy entirely new parts. After removing the original epoxy (or clear coat), I wet sanded and applied a new clear coat. See link to 4K clear coat purchased from Amazon below. Finally, I polished the parts to a glossy finish. The result was gorgeous and required less than one hour of effort. The same repair method could be applied to other car parts, including interior and exterior trim, panels, and hood. I hope this helps you with your project!
2K clearcoat:
amzn.to/3OVwlqV
Automotive sandpaper assortment on Amazon:
amzn.to/3OYDYNA
Isopropyl alcohol for cleaning on Amazon:
amzn.to/49rUePj
P100 Respirator Filter Cartridges on Amazon:
amzn.to/48GnDUL
Half face respirator on Amazon:
amzn.to/3P88tke
Safety goggles on Amazon:
amzn.to/4a0PErb
Attach phone holder to windshield with magnet (NEOS):
amzn.to/3yMJfCs

Пікірлер: 10
@johnleto475
@johnleto475 6 ай бұрын
It's starting in mine... just like everyone else's... Thanks so much for taking the time to film and post!
@pielight7449
@pielight7449 4 ай бұрын
Thanks for posting...there are minor signs of it starting at the very edges on my GSF which was quite concerning, but I now have the reassurance that there is a fairly easy fix.
@joeylopezphd
@joeylopezphd 17 күн бұрын
Thanks for making this video.
@salimrandall
@salimrandall 6 ай бұрын
Great video.
@hirenashiani
@hirenashiani 3 ай бұрын
Great video amazing job. But why in earth you go through all that effort and not wetsand the clear.
@JonathanMarkMorgan
@JonathanMarkMorgan 3 ай бұрын
Even without wet sanding, the repaired part was indistinguishable from the original. Good enough.
@hirenashiani
@hirenashiani 3 ай бұрын
Fair enough
@BigGunTexas
@BigGunTexas 2 ай бұрын
Is that a OEM part or aftermarket?
@JonathanMarkMorgan
@JonathanMarkMorgan 2 ай бұрын
OEM
@aerovaportrail1392
@aerovaportrail1392 6 ай бұрын
That's a really nice job, it turned out great.
HYDRAULIC PRESS VS TITANIUM AND CARBON FIBER PIPE
12:03
Crazy Hydraulic Press
Рет қаралды 16 МЛН
Nastya and SeanDoesMagic
00:16
Nastya
Рет қаралды 43 МЛН
لااا! هذه البرتقالة مزعجة جدًا #قصير
00:15
One More Arabic
Рет қаралды 15 МЛН
How to CARBON FIBER Wrap Your Car Interior | 3M DI-NOC
13:11
Justin Buice
Рет қаралды 511 М.
How To Repair Carbon Fiber Cracks
14:43
Embrace Making
Рет қаралды 358 М.
How to refinish carbon fiber
8:40
Rev High Drive Happy
Рет қаралды 69 М.
How to Make a Carbon Fiber Door Panel 370Z [DIY] (Carbon Fiber Skinning)
14:31
Lexus Door Panel Arm v05
19:02
A.R.T.'s Real Repairs for Real Customers
Рет қаралды 14 М.
Lexus GSF delaminating carbon fiber trim DIY fix
4:29
friendly guy
Рет қаралды 1,9 М.
Carbon fibre skinning!
10:29
Build Create
Рет қаралды 279 М.
Restore Faded  Carbon Fiber
3:48
Powerlinx
Рет қаралды 304 М.
Pulling to PERFECTION! | Getting Glassed!
12:56
Dent Discount - PDR Training
Рет қаралды 6 МЛН
ВЫХЛОП КАК У АХМЕДА WENGALLBI
0:59
Мистер Глушитель
Рет қаралды 1,1 МЛН
Колхоз бугатти #shorts
0:22
KIZA SHEIH
Рет қаралды 151 М.
Достойный поступок водителя❤️
0:39
Taкса
Рет қаралды 4,4 МЛН
ПОКРАСИЛ МАШИНУ (@stilbruchlack - TikTok)
0:28
В ТРЕНДЕ
Рет қаралды 3,1 МЛН
How To Escape A Car Trunk 🤔
0:27
Zack D. Films
Рет қаралды 37 МЛН
Мальчик стал гонщиком в 5 лет
0:14
Короче, новости
Рет қаралды 1,4 МЛН