Crazy Transformation | Full Boat Detail Restoration On This 1992 Bayliner | Revival Marine Care

In todays video we recored an entire mobile boat detailing Job that we completed in Redding, Ca! The boat oxidation was so bad that we had to do a light wet sand, compound and polish to bring this boat back to life! The Shine Supply Products absolutely killed it on todays job! Watch this video to take your Boat Detailing Business to the next level!
👉 We have moved our boat detailing business back to Pensacola, FL.
#boatdetailing #shinesupply #boatrestoration
** Timestamps **
00:00 Into Before & Afters
04:06 Wash
04:31 Wet Sand
04:32 Step 1 Dry Sanding
06:01 Step 2 Shine Supply Heavy Cut
07:22 Step 3 Shine Supply Chop Top
08:05 Step 4 Shine Supply Chop Top DA
08:51 Flip Sides
09:49 Wash | End Day One
11:26 Day 2
13:02 Inter Detail, Seats & Carpet Cleaning
15:09 Water Spot Remover For Glass
16:01 Apply Ceramic
20:24 Apply Si02 Punch It
20:50 After Shots
Compound & Pads
👉 Heavy Cut www.detailusupply.com/product...
👉 White Wool Pad www.detailusupply.com/product...
👉 Chop Top www.detailusupply.com/product...
👉 Yellow Wool www.detailusupply.com/product...
👉 Chop Top www.detailusupply.com/product...
👉 White CCS Foam Pad www.detailusupply.com/product...
Ceramic
👉 Beadlock Pro Marine Ceramic www.detailusupply.com/product...
👉 Punch It Si02 www.detailusupply.com/product...
Sealant
👉 Wax My Boat Kit www.detailusupply.com/product...
Undrdog:
👉wsp water spot remover: www.detailusupply.com/product...
Machines:
👉 Makita Rotary amzn.to/37iJszK
Rupes Mille amzn.to/3uqCoKm
👉 Da Machine for Waxing ( Get 15% OFF Discount Code: DRAKE15 @ Checkout )
maxshineusa.com/store/p/produ...
Sanding Discs
👉 Abranets : amzn.to/3N91YdK
Boat Maintenance Products
👉 Punch It Si02 www.detailusupply.com/product...
👉 Shine Supply aftermath www.detailusupply.com/product...
Other Products I Recommend :
- Pressure Washer amzn.to/322yVpE
- Wash pole amzn.to/3EcscXL
- Soft Wash Brush amzn.to/31Tp6e5
- Lambs Wool amzn.to/3F2kujU
- Super Clean amzn.to/323A2Fx
- Water Hoes amzn.to/333K6MS
- Dawn amzn.to/3caqgB6
- Foam Cannon amzn.to/3J4SdKG
Camera Gear:
- Gopro 9 Used in This Video! amzn.to/39I3wdJ
- Camera Used in All My Videos! amzn.to/2WitD3b
- Microphone Used in All My Videos! amzn.to/37jYAu2
👉 Save 15% On ALL Shine Supply Marine Products
with our discount code ( DRAKE15 ) at checkout.
www.shinesupplymarine.com
👉 Book a boat detail with Drake!
Revival Marine Care
💻 www.revivalmarinecare.com
📞 [phone]
📍 Pensacola, FL . Orange Beach, AL

[@elevatedkingdom8474]

Boat came out looking Fresh my boi

[@Nextlevelmarine]

I thought I was the only one polishing boats in direct sunlight at 106 degrees in California been watching your journey behind the scenes God is with you my brother. Keep up all hard work. It ain't easy polishing a about alone most companies have 3 or 4 guys working on top of each other. Hats off brother God bless. 🤙👍💪👊

[@DrakesDetailing]

Thanks man!!! 🔥😎❤️

[@sambow4u]

Really like your Video,,, Just bought a Deck Boat and putting a Super Cleaning on it ! Rock on !

[@DrakesDetailing]

Awesome! Thank you!

[@Mathewlarge]

Hey, Drake. I just want to let you know how much I appreciate your in-depth process videos and all your efforts are golden… The value you provide is 10x. Detail U Supply will be my go to detailing supply from now on!

[@DrakesDetailing]

Thanks so much for the support!

[@toyf4368]

Great job as always. It looks beautiful.

[@DrakesDetailing]

Thanks! 😎

[@TM-tw1py]

Absolutely amazing! Thanks for this video.

[@DrakesDetailing]

Glad you enjoyed it! Hope you learned something from it 😎

[@yorkmarine66]

looks great for a old bayliner

[@DrakesDetailing]

👍🏻😎🔥

[@RBArcher920]

Thanks Drake. Perfect explanation!

[@DrakesDetailing]

👍🏻🔥😎

[@RaldasDetails]

Awesome video!

[@DrakesDetailing]

Thanks!

[@cm517chris]

Nice work man! Really enjoyed this video 📸💯

[@DrakesDetailing]

Thanks!!!

[@jgamez8658]

Awesome man!

[@DrakesDetailing]

Thanks!!!

[@clarknienhuis8246]

Nice work Drake

[@victorrafa6540]

Great video. Been doing my truck for sometime but this gives me more confidence for the boat and doing a lite wet sand for the oxidation.

[@DrakesDetailing]

Awesome! Hope it helps!

[@MikesAutoDetailing]

Great video

[@DrakesDetailing]

Thanks! We appreciate it!

[@nlamar84]

Thanks! your videos are awesome..

[@DrakesDetailing]

Glad you like them!!!! Thanks so much!

[@johnmcdonald489]

You’re the man Drake!

[@DrakesDetailing]

Thanks!!!

[@hankschrader149]

That's a Washington state boat 😉 can't wait to see the awesome results Drake!

[@DrakesDetailing]

Thanks 😎😎🔥

[@OuzoLouGarage]

Like how you work with the customer .

[@DrakesDetailing]

Thanks 👍🏻

[@josephrevard1567]

Thanks for this video. Im dealing witha crazy bad one at the moment. In particular the cheat on the sanding. Always thankful. Drake.. Joe

[@DrakesDetailing]

Thanks 😎😎

[@retro-junkie5741]

Turned out sweet. Nice job on the freebies also for the customer. Goes a long way. I had a 88 Bayliner... decent boat.. only problem we had was the middle floor started to sponge and flex... Force 80 motor works fine. Can pull a tube or ski behind ok. Nothing major here. These are starter boats imo. B.O.A.T. (Break Out Another Thousand).

[@hankschrader149]

Exactly! It works, you go have fun on the water and the floor is soft oh well that's why you sold it, right? Lol

[@retro-junkie5741]

@@hankschrader149 Exactly. Made even more money because of this BS economy. Crazy yet cool

[@DrakesDetailing]

Nice😎

[@noorbarsik1186]

Hey!!! Absolutely love ur videos ❤️❤️ just a little reminder please stay out of the sun… I used to work outdoors n got skin cancer. You never think it will happen to you until it does. Please be safe ❤

[@RJ1Reed]

That’s a garage kept 30 yr old boat! Still way to may it look like the day it was bought. Drake’s the man.

[@DrakesDetailing]

Yep! Definitely a well taken care of bayliner! Ha

[@j.d.6404]

Hell yeah I bet she really appreciated it after it was done

[@DrakesDetailing]

👍🏻👍🏻😎

[@bradleywatson319]

Drake, I have done both steps with the wool pads after wet sanding and looks near perfect. I started following up with the Lake country CCS white pad on a da and I'm removing the holograms but the finish seems less shiny than the finish of the yellow wool on the rotary. Any idea what could be causing this? What RPM were you running the DA on the polishing stage in this video? Thanks!

[@DrakesDetailing]

Hey bro! Instead of the ccs pad, use the forced rotation lake country pads… you’ll pull a deeper shine out of the surface. Hope this helps 😎

[@larrywright1936]

Looks amazing!

[@DrakesDetailing]

Thanks!

[@gregdorris1]

Awesome job Drake, do you ever do detail work in Sacramento?

[@DrakesDetailing]

No, Sacramento is about 2.5 hours away from me

[@johnworts6309]

Love the videos, just achieved the same results on a 1996. When wet sanding, my DA has “random orbit with forced rotation” and “random orbit with free rotation” which setting should be used? And same question when polishing with a foam pad?

[@DrakesDetailing]

Random orbit with free rotation

[@lakeinit]

Hey Drake, I've learned a ton from your video's. I have a couple of questions on this one. Early in the video you mention using a decontaminate, which one did you use? Also, with the amount of correction needed on this boat, was that step really necessary? Thanks for the great content! I pray God continues to bless you and your family.

[@DrakesDetailing]

Yes it was totally necessary. With the amount of steps it took to do this, it makes the following steps go so much easier. A decontaminate could be anything from degreaser such as purple power and water, simple green, or blue Dawn dishwashing soap.

[@BrandonLayMusic]

Thought you were down in florida? Love your channel man!

[@DrakesDetailing]

I actually moved, I’m in Redding California now 😎

[@hegyo7969]

@@DrakesDetailing Why'd you move? Bethel?

[@DrakesDetailing]

@@hegyo7969 yep!

[@romanrykun9683]

Thank you for explaining everything. I watch almost all of your videos, some of them I watched a few times. Just wondering what do you think about Shine Supply Classic Cut?

[@DrakesDetailing]

Thanks for watching! Unfortunately I haven’t see classic cut yet, I have used classic polish and loved it

[@romanrykun9683]

@@DrakesDetailing By the way welcome to California, your videos are really inspiring, I bought 23 ft striper, the boat was stored under tree for 10 years. I did a test spot and result are amazing. Thank you one more time for sharing your knowledge and techniques. God Bless you in California.

[@danihixon7338]

The boat looks great. What do you do for the non-skid?

[@DrakesDetailing]

m.kzbin.info/www/bejne/n5PJmWurmLhkgZo

[@frankgiordano2072]

Ty. How do you clean the chrome and Bimini top

[@DrakesDetailing]

Chrome, you can just use a good metal polish of your choice. For the canvas, take it off the boat, use a somewhat abrasive brush, wash with Dawna and make sue you rinse very throughly. Then, seal it all with 303 Fabric guard

[@Basscater81]

Love me some Undrdog WSP!

[@DrakesDetailing]

It’s good stuff!

[@jeffmurphy9987]

Drake should we remove the button snaps for cover before compounding?

[@DrakesDetailing]

That’s all up to you! In my experience, it definitely makes it a whole lot easier with doing passes with my buffer. But it’s definitely time consuming to take them all off and put them all back in. It’s all what it’s worth to you, but I like doing it.

[@nlamar84]

bro, fantastic job on this gem!! bravo... about how long did this take if i may ask?

[@DrakesDetailing]

It took around two days.

[@FlawlessFinishSolutions]

Have you used System X marine ceramic? If so what are your thoughts? I apply their auto but getting into boats since I’m in Florida central area.

[@DrakesDetailing]

Hey bro! I have not. I’ve used IGL, Starke, and Shine Supply’s ceramics.

[@barrycowan1997]

Have a big ass chalked fourwins we just sanded half of one side today. Big a$$ boat...

[@DrakesDetailing]

Ahh the joys of what we do for a living! Haha

[@chrisleeper3579]

Hey Drake, Love your videos, do you cut and polish the hull? I have a 96 Formula 252LS and the hull looks dull but I don’t want to block it up and try to get it off the trailer. Is there any way to do it on the trailer?

[@DrakesDetailing]

Without putting it off of the trailer, you might need to do it by hand.

[@jimmybritnell3775]

🔥

[@DrakesDetailing]

Love you bro!!!! 🥰🥰😘😘

[@SPRacingteam]

Hey Drake, great job! I have exactly the same boat. Do you have any idea of the height of the biminitop?

[@DrakesDetailing]

Thanks bro! As for the height of Bimini, I haven’t the slightest clue.

[@hankschrader149]

Drake I have a hook and loop 7" buffer what brand wool pads do you recommend for it? Any help would be great, thanks!

[@DrakesDetailing]

I love presta and lake country wool pads for the rotary buffers 😎

[@lukedames2435]

Great video man. I’m going to do this to my old boat that I’m getting ready to sell. On another note, I just bought a brand new boat, what do you recommend I do to it: wax or ceramic coat ? I Want it to look the best for as long as possible. Thanks

[@DrakesDetailing]

Ceramic is your best option hands down

[@lukedames2435]

@@DrakesDetailing thanks man

[@BretMcCoy1967]

I bought a 2001 Bayliner to restore. What would you recommend to remove decals and pinstriping?

[@DrakesDetailing]

A 3M eraser wheel will get the job done

[@RBArcher920]

Recently purchased 20 year old 22’ all white bay boat and have watched a bunch of your videos which are great. Want to do a pretty good restoration even though the boat is in pretty good shape. However what confuses me is the terminology. I understand what compounding is but is that the same as buffing? Not clear on what the terms polishing, sealing, coating and waxing are or if some of those terms mean the same thing. I understand wax vs ceramic but is ceramic the same as SiO2? Was planning on using Maguiar’s Ultimate with DA buffer followed by Jescar Power Lock Plus. But is the Jescar a final step or do I need to wax or ceramic after that? Keep up the good work, it’s much appreciated.

[@DrakesDetailing]

Buffing Is kind of a blanket term for using any general polisher on your boat. When you are “compounding” you are using heavier grit compound on a wool pad with a rotary buffer to remove heavy oxidation. After you do the heavy compounding to remove the oxidation, then you use polish to remove the rest of the swirls left over from your heavy compounding. A polish is just a finer grit compound then your heavier stuff. Sealing refers to anything that is going to give your boat protection for all the buffing you just did to make your boat shiny. In order to protect that shine. Wether it will be ceramic coating, or polymer sealant it will give you protection from the UV. SI02 is just watered-down ceramic, mainly used for maintenance on your ceramic or your sealant. Hope this helps!

[@tricksend4093]

Drake. When you do a test spot what do you wipe the compound off with to see what process works best?

[@DrakesDetailing]

You got it! 😎

[@bricebuntjer8609]

Hey Drake can you tell me how you clean the boat bottoms and waterline down when they get really crusty? I typically use BioKleen Hull Kleen (sometimes ZING! on the especially crusty ones). Is there a product that you find works better and is perhaps less harsh to work with?

[@DrakesDetailing]

Hey bro! Is just use muratic acid. You can find it at Hope Depot. It works great! Spray it on, light scrub, let it sit for a sec, then pressure wash or hose off 😎

[@bricebuntjer8609]

@Drake's Detailing thanks for the reply. I might have to give that a try some time. The boat I started today had the worst bottom I've seen yet. It was like cement. It took many applications of Hull Kleen and Zing and lots of scrubbing. Blessings

[@bodyshotjake7475]

Have any videos on how to do checkered non slip?

[@DrakesDetailing]

As a matter of fact, I do! m.kzbin.info/www/bejne/n5PJmWurmLhkgZo&embeds_referring_euri=https%3A%2F%2Fwww.google.com%2F&source_ve_path=MjM4NTE&feature=emb_title

[@good2know606]

Drake, I polished my boat with moderna 400. Should I have sealed it afterwards? After a week on the lake it doesn't look very good. It's a 25 foot BAJA H2X if that makes a difference for gel coat. Thanks

[@DrakesDetailing]

Glad I could help!!😎🔥👍🏻

[@glenn4946]

The answer is yes. I haven’t used Menzerna line but 400 is their heavy cut then finishing polish then power lock

[@Anglerswan]

Do you know if the purple pads will be restocked soon?

[@DrakesDetailing]

We are working on it and should be up soon!!

[@joaquingaete5078]

Drake if I'm going to finish the boat with wax should I follow your steps 1 and 2?(heavy cut + chop top)

[@DrakesDetailing]

It’s depends on the oxidation level, if it’s pretty well oxidized, then yes that’s a great place to start!

[@meroliveria4652]

Do you clean in between compounding/cutting? And before polishing?

[@DrakesDetailing]

No, only before you go to seal/wax after all the compound and polishing is done

[@josephrevard1567]

Any tips on speed of finishing the job?? Time is my worst enemy. With everything you did that would take me 2-3 days

[@DrakesDetailing]

Slower speeds for cutting deeper, higher speeds for polishing

[@Funbgs2]

You should really try 3M super duty cutting coumpound with a wool cutting pad. No need to wet sand that at all. But excellent work 1000%

[@DrakesDetailing]

Thanks bro! Not a 3M fan though :)

[@Funbgs2]

@@DrakesDetailing Not a problem. I'm gonna try out the product you use. Thanks for the reply :)

[@walkermishue6352]

Have you ever done any bass boats? Most of my customers are bass boat owners and would love to get some input or see a demonstration.

[@DrakesDetailing]

Hey bro! I have never personally done one, it’s not a popular boat in the regions I’ve detailed in

[@SentientTrace]

The deck was flexing? Is there some deck rot?

[@DrakesDetailing]

I’m sure! Haha, boat is over 30 years old..

[@audreybirklid7542]

I get SO many comments from boaters on a FB not to use magic erasers, but I see you use them and I've done it and the results are always great! Is it true that they can harm the seats? Have you ever experience it?

[@DrakesDetailing]

They can if you don’t properly protect afterwards with a product like 303

[@jessemartin6461]

Does a canvas cover prevent the oxidation?

[@DrakesDetailing]

On the interior of the boat, yes. Not for the exterior of the boat.

[@sergerobitaille6065]

What do you take to get ink off a vinyl bench thank you 😊

[@DrakesDetailing]

Try some magic eraser and degreaser

[@xuv5607]

What is the best way to "PREVENT" hard water spots on boats? Is there a coating that will prevent it?

[@DrakesDetailing]

Unfortunately its very hard to 100% prevent them. The biggest thing you can do is always rise off your boat and dry after every use! Check out our maintenance kit! This kit has a water spot remover, si02 to help with beading and condition for your seats! www.detailusupply.com/products/boat-maintenance-kit-shine-supply

[@nicolasbasterra4630]

Awesome.. can you give me an idea of the price of this service ??

[@DrakesDetailing]

We typically charge around $15-&20 per foot per step

[@Johnnyreengo]

Is there a product to restore the rub rail color? Like "back to black" or something

[@DrakesDetailing]

Hey man! Blush rubber restore is a great product

[@richieallen5131]

What state are you located? Do you provide boat cleaning services in Maryland?

[@DrakesDetailing]

Redding, CA

[@shawbriggs6469]

How much should a detailer price jis type of job?

[@DrakesDetailing]

m.kzbin.info/www/bejne/ZoixYXaHoKqfoNE

[@floydsk9532]

🔥🔥🔥🔥how much does something like this cost

[@DrakesDetailing]

I charge around $15-$20 per step 😎

[@patriotmarineautodetailing422]

🤙🤙

[@DrakesDetailing]

💯💯👊

[@BluestripbanditCEO]

How much did you charge for this

[@DrakesDetailing]

I believe this job was $1,300

[@gbear5022]

What about the hull?

[@DrakesDetailing]

The customer didn’t want the hull done 😎

[@jwall640]

Where are you located!? Lol

[@DrakesDetailing]

Redding, California. Haha

[@1stfrompuertorico568]

1st

[@DrakesDetailing]

😎🔥👍🏻

[@LowNslow946]

Drake- this boats a Washington boat. Do you ever work in Washington? 8/4/23

[@DrakesDetailing]

Hey bro! No I don’t work in Washington

[@smasolo]

Crap if I knew he was in Redding I would have had him detail my boat instead of buying the products. If you need content .....You can do my boat. I can help. It is a Centurion. Going to be there on Saturday the 23rd.

[@DrakesDetailing]

Awesome! Unfortunately I am about 3 weeks booked out for details! But maybe we can get something scheduled for the fall or next spring!

[@jimsam270]

I think do you these videos to get people to buy those expensive products, so you can make a commission on them. That's just wrong.

[@DrakesDetailing]

Hello sir! Thanks so much for the unneeded and hateful comment. 😊 I am very passionate about what I do, and love helping people. These are the products that I use for detailing. That’s cool that you love 3M. I love shine supply. I won’t bash what you like. Have a great evening!

[@PolishedMobileDetailing503]

I bought the entire shine supply marine lineup and have had incredible success with the products and profits from using them. Thanks Drake!!

[@jonnooney7102]

Shiny turd Bayliner with a USMarine branded Force. The job you did is worth more than the boat ! Fiberglass is so thin if you have your head down in the hatch working on a sunny day you can see people walk by on the outside!

[@curty85]

Guy, keep it to yourself.

[@DrakesDetailing]

These people really loved their boat! That’s all that matters right!

[@davinebeck8916]

👊 pքɾօʍօʂʍ

[@DrakesDetailing]

😎🔥