How to get MORE FOAM from your FOAM CANNON Everything you need to know

In today's video I test every tip and hack to get get more foam from your foam cannon. (I do all the tests using a Ryobi 1600psi 1.2gpm electric pressure washer) I test different orifice sizes, different soaps, different foam cannons, and also some little hacks that I have heard of. Does Hot Water create more foam in your Foam Cannon? Does Distilled water create more foam in your Foam Cannon? I made a video on how to change out the orifice of your foam cannon to a 1.1mm orifice to get more foam a few years ago. And in that video, I got a lot of comments from people asking me just those questions. I had never tested all of those hacks so I wanted to finally give them a shot and see if some minor changes actually do make a difference. Hopefully this will help all of you decide which foam cannon you want to go with... ENJOY!!!
See the items I use and join the mailing list at: DTLRsupply.com
This is the pressure washer i used in this test:
Ryobi 1600psi 1.2gpm electric pressure washer - amzn.to/3CrlAFx
FOAM CANNONS:
Premium -
MJJC FOAM Cannon Pro (unbranded) IN STOCK - dtlrsupply.com/
MJJC Foam Cannon Pro on AMAZON (Shipping usually 3 to 4 weeks)- amzn.to/3sNV3yM
MTM Foam Cannon - amzn.to/3pHZlWG
GRIOTS BOSS Foam Cannon - amzn.to/3KoKGYy
Cheap Options -
Amazon Basics Foam Cannon - amzn.to/3tGiRnQ
Twinkle Star Foam Cannon - amzn.to/3hEU5Pg
Tool Daily Foam Cannon - amzn.to/3tSIZMn
Foam Cannon Upgrades to get more foam -
More Foam Kit - dtlrsupply.com/products/how-t...
1.1 orifice - dtlrsupply.com/products/1-1-o...
on Amazon - amzn.to/3Kq4daZ
Premium Foam Filter - dtlrsupply.com/products/premi...
on Amazon - amzn.to/3hKFhyp
FOAMING CAR SOAPS:
(Most Foam) Adams Mega Foam - amzn.to/3IPGz7p
(Great Foam) Chemical Guys Sticky Snowball - amzn.to/3HMCjUR
Maguiars Gold Class - amzn.to/3IOLHIS
Mr Pink - amzn.to/3hJGYwa
**These are affiliate links to the products. We make a small commission on anything purchased from our links.
TIME CODES:
0:00 - How to get more foam from your foam cannon
1:01 - Hacks to get more foam
1:54 - How I am testing to get more foam from foam cannon
3:15 - Hot Water in foam cannon VS Regular Water
3:54 - Distilled Water in foam cannon VS Tap Water
4:37 - 1.1mm orifice upgrade for foam cannon
5:49 - Premium Foaming Soap Vs Regular Soap
6:15 - Upgrading Foam Filter to get more foam from your foam cannon
9:15 - MJJC Foam Cannon Pro
10:34 - Final Comparisons for more foam from your foam cannon
#CarDetailing #FoamCannon #MoreFoam #FoamCannonTipsAndTricks #HowToGetMoreFoamFromYourFoamCannon
Disclaimer:
Due to factors beyond my control, I cannot guarantee against improper use of the information I share in my videos. (IMJOSHV) assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not (IMJOSHV) or any business affiliated to (IMJOSHV).

[@stanmann1984]

My wife and I bought our 1st house around Christmas and I wanted to step my detailing game up. Your vids help me build an awesome detailing system! Washed my wife's car first with the new setup and she was extremely happy! Did mine next and great results just like hers! I have learned so much from your vids I'm actually now giving guys at work pointers lol. May GOD continue to bless you and your family and keep the awesome vids coming! Thanks again bro!😎🍻

[@imjoshv]

Thanks so much! That is awesome to hear

[@WesternDriven406]

Enjoying all your vids. Have learned so much. I’ve purchased a lot of what you’ve promoted…Mr. Pink, tool box vac, pressure washer, foam cannon, hoses and more. Having a blast working on my vehicles here in Indio. Thanks Josh!!

[@stevem5840]

I appreciate the time you put into these reviews and cost analysis. Thanks!

[@thecheetahman22]

This was an absolutely fantastic video. Best I've seen so far on comparing foam cannons. Your channel has been invaluable for me the past couple months

[@jeffclarke5497]

There's a new quantum mechanical, electron spin controlling wand that will produce 17" of foam on a surface from a spray of 0.1 ounce of the Ivory Soap left over from your last shower. Only the lower 0.1mm of soap will touch the dirty surface, but it looks amazing.... It will only cost a couple of months of your mortgage payments and you'll feel great about it.

[@willcopejr]

Very good review here Josh!! Thanks for making this. Each time im getting close to getting that small ryobi pressure washer and the MJJC. You make great content thats relatable and Real!

[@Redrunnerdetail1323]

I’m just starting really detailing I been wash and taken care of all my car since high school ! But I really wanna start my own business mobile detailing I been watch a lot of videos and none are better then yours man ! A lot of useful information and you give all the things to start and keep a business! Much respect to you bro I brought the hose and pressure washer gun off the video and couple other stuff ! Thank you.

[@chadamos7297]

Thanks for the tip on orifice. I bought a trinova foam canon, played around with soap and water, got pretty decent foam. Changed out the orifice, incredible amount of foam with Chemical guys honeydew soap. Trinova does go through the solution though.

[@TheSwede04]

Thank you Josh. You covered all the bases and you make our options clear. Your Website is also quick and simple to use. Your prices are competitive. I would much rather buy products from the person who took the time and effort to explain my options. Peace to you and your Family.

[@warsamewarsame6835]

Thank you for your tutorial videos. I followed your instructions and got a shaving cream foam from a cheap Amazon foam cannon. Thank you. I wish I could share the video of my foam.

[@jair2776]

I wish this video was out a lot sooner lol. I had to learn the hard way. Bought a few cheap amazon/ebay cannons and tried everything. I ended up buying a MJJC PRO 2.0. Can't wait for spring to use it.

[@chrisguzman7926]

nice haha, just ordered the griots brilliant foam canon with some metering tips, should get it today and gonna try it out on Saturday, hella excited for that thick foam

[@danielshallberg9266]

@@chrisguzman7926 howd it work

[@danielshallberg9266]

How you like it? What pressure washer are you using ?

[@chrisguzman7926]

@@danielshallberg9266 I like it, it shoots super thick foam but the little ball has started to rust so I clean after every use now and I use a cheap ryobi pressure washer like the little 100$ one from home depot

[@ismaelumpierrez4342]

Man I've been looking for this video for so long. Thank you

[@renaissancelaboratories5645]

Great details and analysis in your videos, thank you!

[@nanpalmeromba]

Thank you for the thorough walkthrough!

[@imjoshv]

You bet!

[@pasqualepisani]

Excellent video- THANK YOU

[@8ionicman63]

Very helpful, thanks for sharing

[@David-Godin]

I see the Meguire's Ultimate Snow Foam in the video. I have never seen a foam cling so long to the surface than that one does. Try it out and see how long it clings. I let the foam dwell while I do the wheels and tires and most have already dripped off but that stuff the car is still white with foam. Great video, keep it up 😎

[@sandeepsharma-rc7sy]

Really helpful and informative and solve my all queries. Support from India

[@Technie87]

Honestly considering you have to buy all the other stuff, mod it, and it still doesn't end up as good I would say its best to just go MJJC Pro or V3. Not to mention if you already got a SGS28 or another high tier gun you may as well buy once

[@ScotCerullo]

Excellent video. I took your advice and swapped out the orifice. Makes a big difference. But can you explain what the knob and nozzle on the cannon do? I know you've explained this before, but I know that adjusting the two can also improve foam. Thank you!!

[@jeffcoffey1700]

I ordered my foam canon from you a few days ago !!

[@josh33025]

I just got my mjjc pro today and can't wait to see some thick foam compared to the cheap cannons I have.

[@AE-sq4nk]

Love your videos! Trying to buy some quality basics to get started. Do you have a video that covers the various soap products to help me figure out what I need? Not sure how to sort through the various products on your website. Thx!

[@joshfarrell210]

Could you show how much soap you are putting in the foam cannons?

[@craftman5632]

It tells you on the back of the soap bottle how much ounces to use, typically 3 to 4 oz for a 32 oz foam Cannon bottle.

[@kylehaley5495]

Yea but this dude always avoids telling people exactly how much soap he uses and there has to be a reason.

[@Voodoo_HG]

​@@kylehaley5495Probably because he feels like it depends on his water etc,But he has said it before in the videos where he tests multiple soaps he says 1 to 2 ounces most of the time

[@Voodoo_HG]

@JoshFarell210 I say 2-3 ounces

[@afstar186]

Hey great video I bought the premium foam filter but it seems that now the foam that produces is more runnier currently I use the mtm pf 22 I think maybe it needs to be more tight, does the foam cannon you sell in your site comes with the premium filter?

[@iangriff2170]

The DI water has to be fed through the pressure washer too via a resin filter etc but will only improve foam quality if you are in a hard/mineral rich water area. The Gold Class isn't a dedicated snow foam, but can be used as a basic one, so bit of an unfair comparrison with the other foam used. Also, thicker foam doesn't = beeter cleaning. Bilt Hamber Auto-foam is a great cleaner but is very runny.

[@jameelmusah1941]

@IMJOSHV you've definitely convinced me to get the MJCC foam cannon with a higher quality soap. I've played around with my Amazon basics foam canon and upgraded the Orifice size but still doesn't compare to the MJCC foam cannon.

[@roman-bq3iy]

Thank you for all the videos. Learning a lot. Any chance you offer coupon code to use on your site for foam cannon purchase? Thanks.

[@KlockoFett]

Solid tips! I stopped monkeying around with the cheaper foam cannons and got a MJJC. Honestly, my original cannon wasn't even cheap. It was one of the ones Chemical Guys included with a starter kit. On its own they charge like $70 for the thing, which I've realized is about $30 too much after using the MJJC.

[@imjoshv]

Yea the mjjc is amazing! It really produces a lot more foam than the others

[@KlockoFett]

@@imjoshv I'm actually watching your video about whether hose length affects psi as I write this. No surprises in the findings. What I'm wondering though, is if the 3/8" hose changed the gpm. Would be nice if a 3/8" hose upped the normal 1.2gpm to something closer to or above 2gpm.

[@WhiteLBZ]

I’ve been binge watching your videos for a few months now. I still need some help in areas. Quick back story - I live in Apartment complex in Florida, and in the back of the neighborhood there’s plug ins and a water source. I have a White Lifted truck that is always dirty by the end of the week. Every other weekend I attend meets, and charity events with my truck. I load up all of my equipment to wash my truck every Friday in the back of the complex. I don’t have much space for alot of chems, wands, hoses, etc. Any recommendations on the best way to store and transport the products I need to clean my vehicle in a small amount of storage space that I have? Right now, I carry my Ryobi 1600PSI electric pressure washer, foam cannon, 3 hoses, Wheel cleaner (I have polished wheels), brushes, rags, wand, etc. it’s a lot to load up and bring back to organize it again in my outside closet. Any recommendations would be greatly appreciated! And keep up with the amazing videos!!

[@renato182rg-v4]

Hello I have a question for you , what’s a good setup to get if you want to start your detailing cars. Because that’s what I want to do but I don’t know where to start or get

[@sergiuangelo]

hi Josh, you have very much experience with the foam cannons and pressure washers, do you know why when I trigger the gun for 1-2 seconds I get only soapy water and then foam ?

[@Carnage488]

Excellent video as always. Do you think a 1800psi and 1.5gpm pressure washer get think foam? Im struggling all though i did everything you mentioned in this video. To be fair I'm using a cheap cannon 😅

[@lukefitt56]

I’ve been wondering this for a while I appreciate you doing a video on it! I’ve got the cheaper foam cannon and would like to upgrade but since I just do it for a hobby I think I’ll wait till this one breaks to invest in a nice one. I think my biggest complaint is the shape so it always lays on its side :P

[@markpolakovich6697]

Question, so whether the soap is sort of foamy or shaving cream, what’s the difference clean vehicle wise? Does the shaving cream allow you to get more time when using a mitt or brush to wash your truck?

[@Jwmojica]

What dilution ratio do you normally use?

[@obliviondio]

Can you use the double mesh filter in the mjjc? My mjjc has runny foam.

[@Bars001]

I bought the MJJC cuz of your videos and swapped the orifice and bought the soap you recommended but I still get runny foam. I have the sunJoe 3000x.. any tips to get thicker foam?

[@jyo8914]

Just used the MJJC Pro for the first time. THANK YOU for the recommendation. It worked insanely well. Used it with the Active pressure washer and the godzilla (?) hose. Great setup and combo. Appreciate all of the content. I had the Ryobi and it leaked oil, so I went with the Active unit. One thing about the MJJC is that it goes thru soap/water very quickly. If you have a larger car/SUV, you may need to fill up all the way to the top or refill in between.

[@codhruv839]

did you change the orifice?

[@jyo8914]

@@codhruv839 Yes.

[@pullingthestrings5233]

That's the price for thick foam😊

[@EC-uo4iv]

​@@jyo8914 I thought you weren't supposed to change the orifice to 1.1

[@jyo8914]

@@EC-uo4iv I know that the Active pressure washer isn't designed specifically for it (they cite the 1.1 mm orifice as one of the reasons for the surging), but my 2nd pressure washer has been working fine so far.

[@schleutker]

will changing out the foam filter and smaller orifice produce more/better foam in a regular 3800 psi power washer??

[@drvn4eagles]

I’ve heard of switching out your trigger sprayer on the pressure washer, does that make a difference?

[@harisyoung4110]

You should also test putting double 3.6gram stainless mesh filter in the nozzle.. i got a good result doing that mods without changing to smaller orifice.

[@eugeneclark8463]

First of all, great job! Love the videos. I was wondering if doubling the foam filter would help with foam production, or will 2 filters actually fit in cheap foam cannon, asking for a friend 😊

[@eugeneclark8463]

The answer for my foam cannon is no, not enough room in the tube for 2 filters, idea ( extended tube to fit more filters )(diffusers) for more foam. But at some point, the product is as thick as it gets. Thanks again for the awesome videos. Without your videos, I probably would have just rented a pressure washer, now a proud owner of greenworks 2300 pro, ramp up is annoying but performance is good (house,fence,car) you helped me identify many applications, especially using foam cannon soft wash, the washer will not be collecting dust, and the 3 family cars are beautiful! 😊

[@dontaewoods79]

Does it matter if I have a long nozzle gun? Or do short guns work better to get more foam?

[@MikesAutoDetailing]

Great video

[@XtianApi]

Is the soap knob on the Canon turned up to full? Also, I got mr pink and it says 1 to 2 ounces of soap per bottle. Have you found more or less soap matters?

[@giteshpatel7204]

Hi, can you tell us what your typical soap/water ratio is? Thanks!

[@eco3091]

Nice vid, is a 1.0mm or 0.9mm orifice recommend to produce even more foam? Those sizes are also available, thanks!

[@danielb6055]

How much oz where places in the cannons? Love the videos keep up the great content 👍

[@jackpiedra7532]

Stupid question. Looking to buying a foam cannon. Do I still have to actually use a wash mitt when using the foam cannon or is the foam cannon a replacement for the wash mitt?

[@doug774]

Best advice

[@newkhodiyarauto7892]

Nice information videos

[@namir91]

Whats the difference between the MJJC pro vs the blue and red versions?

[@fjizklosdhwsedfijklr9239]

Hello imjoshv. Is it safe to use a 0.9mm orifice for Lavor One 120? How about 1.0mm? I have very cheap local shampoos named Microtex and Pro-Choice about $6.65 for 2L and $1.62 for 1L respectively

[@DAT-TEXAS-DUDE]

Any other foam kit suggestions as the one that is linked on the description is not available

[@juan6709]

Grate video... Really need some advice on why my tool daily foam Cannon was super runny :)

[@imjoshv]

Yea there can be a few reasons but hopefully the video gave you a good plan!

[@tomgomez5807]

If you have a Gas Pressure Washer rated at 3200 psi and 2.5 GPM, What orifice is needed for MJCC Foam Cannon Pro and using CG Mr Pink or Watermelon soap???

[@tl4587]

How long do you let the foam stay on vehicle before rinsing?

[@davestewart9146]

I just used my mjjc washing my truck today, do you happen to sell the little red plugs on the top of the mjjc? Evidently I lost one of my red nipples today, I hate when that happens lol, I found them online but I’d rather support your website, thanks Josh 👍😁

[@680ecks]

I got the astrolal cannon looks lkke a copy of mjjc . put the 1.1 in it and used it with my craftsman cube and chemical guys soap i got about five years ago and it works great very happy with it . cannon was $22.

[@680ecks]

Just looked it up under $20

[@rosswagner9083]

Clearly the MJJC produced the best foam when compared to the Amazon basics. On your recommendation I purchased the Amazon Basics and upgraded it to the 1.1 orifice and it works well. My question is that all things being the same, other then the foam cannon, if you detailed the exterior of a car wouldn't the results be the same regardless of the slightly better foam from the MJCC. Wouldn't both vehicles come out looking identical? In terms of end results I don't see how it would be worth upgrading just yet for me because I feel like both results in the end would be great.

[@The1Music2MyEars]

Thicker foam means you have more working time to take a detail brush and work it into emblems, etc. It also gives you longer working time for you to take your wash mitt and go over the entire car. The foam sits longer so by the time you get to the lower panels there will still be some foam for you to use as natural lubrication whereas if it was runny, the soap might have fallen off the car by the time you get to the last panels.

[@ddautodetailing]

Great video. I was really interested if warm water or DI water actually made a difference.

[@altillman1448]

Yes warm water also increases foam ability.

[@Archeagle]

Very good video thank you

[@imjoshv]

👍👍 thanks!

[@TheRealSkiMask]

I have a trinova and adams foam cannon and I think it might be my pressure washer bc it turns on and off when I have it on since it has a diff pressure hose

[@humphreymatimura6910]

You can also use ,go with all product in your form canon that way you can get the creamy shaving form you want one might say you be wasting product but changing the orifice could blow out your pressure washer motor so before you make the switch be 100% sure that your washer has the motor capacity to support a 1.1 orifice

[@topnotchdetails9637]

What soap:water ratio were you using for each soap?

[@Pogbab]

What water ph & alkalinity level do you recommend

[@tonysilva5558]

Great video, I really like the MJJC. My only question is do you have to use a pressure washer, I'm guessing you do so will a 3000 psi pressure washer be too much for it? Thanks!

[@imjoshv]

A 3000psi will be fine! The foam cannon comes with a 1.25 orifice installed so for the 3000psi I would leave it with the 1.25 and not swap in the 1.1

[@tonysilva5558]

@@imjoshv Thank you

[@TimNThoma]

I found walmart has a 1.1mm orifice for .99 cents from wepro, do you think it would be decent or junk being just a little orifice

[@hollowpoint45acp]

what hose do you use with this Ryobi?

[@rapturousspearhead602]

Hey Josh! Do you need to upgrade the foam filter if you buy the MJJC foam cannon, or do you just use that thing stock (with the 1.1?)

[@ruandebeer5496]

No you can use it stock.

[@budddyrda]

What pressure washer did you use during the test?

[@erikalvarado1432]

I just recently bought the griots garage foam cannon, not the boss. And it has the metal ball at the end like the MJJC, but when not used it makes an orange rust like water in the bottle, have you seen that with the metallic ball at end of hose?

[@imjoshv]

Interesting. No i have not seen that there, but i did see some on the interior components of the head unit on the griots boss.

[@mpinto4649]

I used griots brilliant finish foam cannon for the first time last week; ran water through it before storing it. After reading your comment, I can confirm, my brilliant finish foam cannon has the same rust water in the bottle and on the metal ball. For reference, I own the griots BOSS foam cannon and have used it multiple times in the last 6 months of ownership. My BOSS foam cannon DOES NOT have any rust water.

[@jorgeluissanchez3360]

What pressure washer was being used?

[@alejandrotacubeno2794]

I bought the foam, hose, pressure washer and foam cannon you recommended and my foam was still pretty runny what could be causing this I also tried increasing the product to water ratio still no real better performance

[@davidcarter999]

How much SH when you use a 10% do you put in a phone cannon?

[@ken8516]

will using a 1.1 orifice increase amperage?

[@jefferybradford5936]

I got a foam cannon from Lowes. It was about $30. My question is can I get those same upgrades for it or should I just get a different cannon???

[@jabarjitsangha6938]

What pressure washer are you using and at what PSI? Also I feel altitude can make a difference. I’m at 6,300 ft above sea level and cant get any foam cannon to make foam that thick.

[@danielshallberg9266]

1.1mm orifice if you have under 2gpm. Adams mega foam. Make sure all connections are tight. 2-3 oz of mega foam after water then shake.

[@whitelx]

What's the deal with the Explorer Limited in the background? I always see it in all your foaming videos.

[@VicTITS]

How much soap to water do you normally use?

[@ShawnCardamon]

Great tip! Recommend using soap formulated for foam cannon for foam lifting of contaminants where standard wash soap is more formulated to be a safe cleaner with elements of lubricant to avoid marring. Also, switching the orifice is good when recommended (there are charts out there) but smaller orifices -can- cause harm to a pressure washer motor by creating resistance in the system which it is not designed to handle. That said, it is really unlikely it would cause harm but worth mentioning.

[@JJUAREZ2409]

Lol Damn JOSH you had to bring the "beast" the staple foam cannon for auto detailing. THE MJJC PRO p.s best purchase I ever made for foam cannon haven't looked back since

[@mikethompson5757]

Have you tried your foaming filter upgrade in an IK foamer!?

[@Pacogee7]

Can the psi of a pressure washer possibly affect how the foam release? I use a gas Generac 3100 psi with a foam cannon from chemical guys as well as the honey dew snow soap and I haven’t gotten the results as others when it comes to getting that foamy shaving cream.

[@itunda5607]

Electric is better but gpm is what’s important

[@djreaction1]

Great video as always! I'm in the market for a new foam cannon. Are you using the unbranded PRO MAX (from your website) or branded version (from Amazon) MJJC in this vid?

[@imjoshv]

Unbranded one in the video but they both work exactly the same! So if it’s easier to order on Amazon you’ll get the same results. But I do appreciate orders on my site haha

[@djreaction1]

@@imjoshv I’m all about supporting people who put in hard work! I’ll put the order in now and wait for it to get to Vegas. Thanks for the fast response!

[@stevenstrawn4169]

How do I order MJCC from your links, can not find

[@nahimibrahim107]

Where do you get orifices from?

[@timg1169]

I have an idea for a possible future video, If its even possible to get foam using the sunjoe bucket pressure washer.

[@richardacosta7741]

Hi How do I get your foam canon MJJC??

[@Johnsua-lr3qw]

I bought the MTM pf22.2 foam canon, a ryobi pressure washer 1800 psi, I use the chemical guys mr Pink soap and I also installed the 1.1 mm orifice in the foam canon but still I don't get that thick foam, idk what I'm doing wrong 😅.

[@CookingJoeFoods]

Were you able to figure this out? I just bought the same setup.

[@AvilasAutodetailing831]

There is a mesh filter type of thing blocking the orfice on my foam cannon, do you think I should just break through it?

[@altillman1448]

No this part IS creating the foam ability. Overtime it gets clogged and you have to swap them out for new ones.

[@xBlack0uto]

@IMJOSHV I bought the 1.1mm from your site a while ago, put it in my cannon but when using it, it just leaked all over the place from when the connection is. No water was able to pass through the cannon, any ideas on what's going on?

[@imjoshv]

Hmmm. No I have never seen an issue like that. Did you j spect the orifice, maybe it has some sort of blockage? What foam cannon are you using it in and what pressure washer also? You can email me at [e-mail] and I’ll do what I can to help out!

[@gregorypecaut7164]

Wouldn't using soft water to the pressure washer be an enormous improvement? I know it makes laundry detergent suds a lot more in a washing machine. It should also greatly reduce water spotting too.

[@ShawnCardamon]

I use water from my water softener, does help quite a bit with effectiveness and avoiding hard water spots

[@gregorypecaut7164]

Absolutely. And deionized water even better. And you would get more life (more gallons usage) per deionization filer, if the water ran through a water softener first. You're getting the idea.

[@nanpalmeromba]

I bought the foam filter upgrade and it worked! Thicker foam with less soap consumed. Great tip! 💯 I’m using Mr Gold and 4:1 water to soap.

[@craftman5632]

It's usually it's 10 to 1 ratio, looks like you're using way too much soap but whatever works.

[@hookandlateral1]

Hey Josh, has Maxshine ever told you why they haven't made a gallon sized ultra foaming wash? Doesn't make any sense when most of their other chemicals come in the bigger containers

[@imjoshv]

I think for most brands 16oz is the #1 selling size for consumers. So I assume thats why

[@anthony1113]

Which pressure washer are you using for this test?

[@nikkiau1]

Have you tested Chemical Guys foam cannon and their Big Mouth one?

[@1LifeTheory]

What is the soap to water ratio?

[@Tobias-sb8pr]

Is there any downside to installing the 1.1 orifice on the mjjc pro cannon?

[@imjoshv]

Hey Tobias, If youre using a stronger pressure washer you dont need to switch it out. If your using an electric pressure washer between 1500-2300 psi and 1.1-1.3gpm then the 1.1 is the way to go! and no there is no downside

[@Tobias-sb8pr]

@@imjoshv that’s great, how about the piece on top that spins. What does that do?

[@imjoshv]

@@Tobias-sb8pr that adjusts the amount of foam. I typically just crank my down all the way

[@Nick-NY]

8:10 Why does it look like you sped up the playback? Either that or it was very windy. 🤔

[@bailey7440]

Definitely sped up. Good catch.

[@Yanks_Fan]

Yeah, something is definitely off. Both the lower right, and lower left.