DIY 6.7 Cummins EGR delete. Off-road use only. Cleaning EGR purposes only.

[@3guysgarage]

Hey hit that sub button already it’s free!

[@murl420]

I found that using a flex head ratchet with a wobble extension works perfect for the bolts at the firewall.

[@3guysgarage]

Good tip!

[@rickangler]

Thanks for taking the time out to make a video of all this. Very helpful.

[@timothyspringer1876]

I did mine exactly like you did because I couldn’t get that piece out of the head so I just shoved the hose over it 😂 and I touched the ratchet to the positive too lol

[@3guysgarage]

It’s not a hard job just some of those bolts to get to man the engineers did not keep us in mind lol….. when I blew that terminal fuse I was like wtf is going on 😂

[@jimmycito2624]

I had the same problem! Also shoved it over it lol

[@tonyboneize]

(At the end of the video)…….. don’t worry, I just let my grid heater wire touch something metal the other day and now I’m not sure if it works or not.

[@3guysgarage]

Lesson learned right?

[@WhiteTacoma]

I seen ur truck at Mario's in frostburg Maryland and seen ur yt sticker on ur back window nice truck 👍

[@3guysgarage]

Hey man thanks for the support I appreciate that! You got a rig yourself or just local from the area?

[@mxcjoe]

Will this "temporary " delete give a check engine light? If so how to fix? Also what improvements will you have while this is done?

[@3guysgarage]

Without tuning devices yes

[@fireflyraven2760]

Rollin down the street with a five inch straight pipe looking to hit 800,000 see you egr their

[@3guysgarage]

800k miles? Gives me hope lol

[@fireflyraven2760]

It's a joke though I hear pew emissions diesel could hit that and fo pass it with ease

[@matthewjohnson3505]

Stupid question…if you temporarily remove your egr, will you see codes? Since the plugs aren’t attached to the system?

[@3guysgarage]

@@matthewjohnson3505 without tuning software yes you will

[@SCLaughter]

Hey man. On the exhaust side of the manifold. Did you reuse the original gaskets for the block off plates?

[@3guysgarage]

Yeah I did. The ones that they sent me looked so cheap

[@3guysgarage]

Hope you hit the sub button 🫡

[@gilhopkins2465]

Did you drive it without a software delete ? Or if you deleted it what tuner did you use and did you tune it before or after the physical delete

[@3guysgarage]

@@gilhopkins2465 software done at the same time

[@chrischapman276]

I'm in the process of a good cleaning of mine along with already got the exhaust all cleaned up but now I'm going to program the system to be able to race. I'm not going to remove the cooler and the EGR stuff just yet but don't want anything to become confused. So far I see the two connectors at the EGR but then, passenger side there's the one on top/left but then one a little lower, more to the starboard side of the truck. When I do the clean up on my EGR and such, do I need to disconnect the 4th connector on this 14 Ram Cummins or does that 4th one stay?

[@3guysgarage]

So from the shop that I got my kit from they told me I didn’t have to remove my egr stuff just make sure I unplugged it with the tune and it would be fine.

[@paultiller6175]

How do you install a program? Do you need special equipment? Where would a person find this program?

[@3guysgarage]

I’m personally running a ez lynk tuner with GDP tunes. I could do a video walk thru on how to install a tuner if you think it would help you? Hit that like and sub button also thanks.

[@bookieyadigg]

Nice wordage! 😉

[@alfonsopeters6430]

Was the fuse the issue mine won't start waiting for batteries to charge but I forsure sparked a few times lol

[@3guysgarage]

Those little fuses on the battery gave me such a headache and yes that was my charging issue lol

[@chilltime4878]

Thank you for makin the vid. I was just wondering, do the o rings under the blockoff plate on the right side need to be lightly oiled first or just put on dry?

[@3guysgarage]

I personally put them on dry with no issues

[@chilltime4878]

@@3guysgarage Ok. Thank you. I’m fixin to do mine right now.

[@3guysgarage]

@@chilltime4878 if you have any questions a long the way just shoot me a message on here I’ll gladly help anyway I can. Also hit that sub button!

[@chilltime4878]

@@3guysgarage thanks man! Subbed

[@rogerpeterbilt5876]

Did you have to put gasket on the 2 plates on manifold.

[@3guysgarage]

Thanks for stopping by can you hit that subscribe button it really helps out with the channel. Yes I did on the intake horn I used 2 gaskets (new)

[@ramrunner931]

Great video. I am considering to go off road with my truck. Could you share the info of the parts needed to perform the clean of the egr? Also; what type of tuner and where to get all parts? Thank you very much!

[@3guysgarage]

Thanks for stopping man make sure to hit that sub it really helps the channel. So I have an eBay egr kit it’s in the description of the video. I’m on ez lynk also

[@RockyMtnWay_406]

yah that eBay link is no good anymore

[@GilBil-u4p]

I did mine but I have egr codes how do I clear them? Do I need a tuner?

[@3guysgarage]

Yeah tuner is the only way to get rid of those sensors

[@msantiago628]

Hello good sir what code did it give you for those terminal fuses

[@3guysgarage]

It wasn’t a code it was on my screen saying low voltage and it was killing my batteries

[@tonymalerba1067]

Wow dude is all nudge nudge , wink wink.

[@3guysgarage]

Weird how that works huh lol

[@Morganexvavation]

What year is this truck?

[@3guysgarage]

2104

[@dmtycn]

You did not install the support bracket at passenger side?

[@3guysgarage]

Thanks for stopping by go ahead and smash that sub button. No I did not install. No issues for 3k miles either

[@dmtycn]

@@3guysgarage Ok, I just worry the transmission check port will make some damage to the pipe if it not fixed somewhere :) Just done my 2021 yesterday and the bracket is for 10-14, big trouble to install that bracket.

[@3guysgarage]

@@dmtycn I thought about that honestly it might hurt it but idk so far so good I might check back in a couple months and I messed up ? It’s hard to say

[@Pinpon-ni8vc]

Well I’m making making my truck off-road

[@3guysgarage]

Hopefully you hit that sub button

[@therealsolenya5933]

Do you have a link for the kit you used? I can't seem to find one that's not at a ridiculous price

[@3guysgarage]

Did you check the link in the bio?

[@cass8144]

Do you know if this will work with the 5500s? I've heard you need a different delete kit but aren't they the same engine?

[@3guysgarage]

That’s a great question. I would assume as long as it’s a 6.7 this would work?

[@cass8144]

@@3guysgarage that's what I would think

[@3guysgarage]

@@cass8144 I couldn’t imagine them changing the engine.

[@luisuranga9212]

Did you installed a program after did this ??

[@3guysgarage]

I installed it before i did it

[@luisuranga9212]

Ok thank you for answering so fast ?

[@3guysgarage]

@@luisuranga9212 no problem any other questions just ask and don’t forget to hit that subscribe button it helps out a lot!

[@Valverde38]

What tuner u use for the EGR delete

[@christopherpaltza1732]

What egr delete? He’s just cleaning it lol

[@jesusayub7371]

Borren todo el sistema de DPF No se la compliquen Ese sistema es una basura, pura perdida de dinero y de tiempo One word. DELETE!!!!!!!

[@3guysgarage]

Agreed! What country are you from?