Do this After Flushing Engine Sludge / Engine sludge CLEAN Up Essentials

Here the 3 things to do after flushing engine sludge; these are engine sludge clean up essentials. Cleaning engine sludge from these additional areas will ensure you don't starve your engine of oil. How many times to flush an engine remains debatable but I had to do a couple of flushes and oil changes to get a god result. I used Liqui Moly Engine Flush Plus twice (before oil changes) and have recently used Mannol motor flush too. These oil control solenoid and its strainer need to be clean to ensure optimal engine function. Although I show how to check these parts on the 2002 - 2007 Corolla, the same principles apply to other cars and their variable timing systems.
Get from Amazon
- Liqui Moly engine sludge plus - amzn.to/44VFLsd
- Mannol Motor Flush - amzn.to/3wcgZb1
- VPCOK ultrasound cleaner - amzn.to/3k6mSNZ (110v)
- VPCOK ultrasound cleaner - amzn.to/3I7U5ox (220v variant)
- Check out other tools & products I use or recommend - amzn.to/42LGCL8
I may earn a small commission from a purchase made through the links above. This does not increase the price you pay in any way.
Timestamps
0:00 - Intro
0:29 - Check oil control solenoid
1:12 - Strainer oil control solenoid
1:46 - Sludge in oil pan
2:29 - Clean solenoid and strainer
#sludge #engine #oil #liquimoly #mannol #vvt #solenoid #diyautoworksng #flush

[@mixedboi]

Would you mind checking the pick up tube? I am almost positive that it's going to be fine, but preventing is better than lamenting. Great points you made about the vvt solenoid, on Hondas thats the first place that gets clogged with metal shavings in pending component failure.

[@DIYAutoworksNG]

Agree. That's the only other logical thing left, though I believe it should be good. I'll keep a tab. Thanks for watching!

[@Stanjara]

If only the whole engine can be put in a ultrasonic cleaner tub.

[@DIYAutoworksNG]

That would have been amazing!

[@B_-.-]

My car has this exact engine, and my pickup was clogged by RTV and it caused rod bearing failure - there were 0 symptoms before the bearing failure, no pressure light, no noises, no lack of performance, nothing. I think you should check the pickup strainer as it could he partially clogged without you noticing.

[@DIYAutoworksNG]

That's very interesting... Thanks for sharing. You've now tipped me over to doing this!

[@justiniyke2955]

does a 7th gen accord have the oil control solenoid? Also the 5k oil changes is it in miles or kilometre

[@DIYAutoworksNG]

Yep. The 7th gen has it. Honda calls their variable timing control (VTC) solenoid. It's by the side of the engine (passenger side). Oil change interval is in miles.

[@justiniyke2955]

Thanks chief@@DIYAutoworksNG

[@olumideakinyetun4049]

Does the Liquimoly engine flush dissolve the sludge into liquid form?

[@DIYAutoworksNG]

Yes. It did a very good job in my experience, but doesn't remove 100% of the sludge. I think it also depends on the state of the sludge e.g hardened vs soft

[@tj-hero]

😊✌️

[@DIYAutoworksNG]

🤛🏼

[@Edvard-Aliev]

Привет, почему было так грязно? Перекатываете масло?

[@DIYAutoworksNG]

The car had a valve cover gasket that was leaking for a sometime. It's been replaced, but it collected a lot of dust.