EP4 Project Lotus Hunter: What is needed to perform a 2ZZ Swap on a Toyota Mr2 ZZW30? Full list

Ever wondered what is needed for a full Toyota Mr2 2ZZ-GE Engine Swap? Here is a full list with a couple of explanations to go with the parts. Cost breakdown included! Enjoy! Follow me on Instagram: @jesse_yaroo
/ jesse_yaroo
This video will give you a complete list of parts needed to performa 2ZZ - GE engine Swap in a Toyota Mr2 (Spyder or MR-S. ZZW30).
Here are all the parts you need with the time in the Video they show up:
0:36 Swap Exhaust Header
1:24 Mr2 compatible Oil Dip Stock
1:47 Shifter Parts (shaft and block off cap)
3:00 Engine Loom 1ZZ
3:08 2ZZ Stock ECU if not using a PFC (PowerFC)
3:49 Lift Harness
4:42 Engine Mount Bracket
5:32 Vacuum Block off Caps 2X (small)
5:52 Cooling Block off Cap 1X (Big)
6:08 2ZZ Apexi PowerFC if you want to tune the car
8:15 Stock Key (Celica or Corolla for Euro Spec)
9:08 Swap Intake kit
11:14 Used 2zz Engine (complete)
11:38 Used 6 Speed transmission (of preference)
11:50 Starter Motor and Clutch/Flywheel
11:57 Costs and Budget needed
15:15 Grand Total
This video is built up like a tutorial. If you ever want to go for the 2ZZ Swap in your MR2 make sure to watch the video, I am sure it could be useful for you and can help you in the process. There are other episodes of this series, so make sure to check the following playlists:
Mr2: Project:
• Project Car: Toyota Mr...
2ZZ Swap How to Tutorial Playlist:
• How to Swap a 2ZZ - GE...
Other Tutorials:
• Tutorials
Thanks for watching!
Make sure to subscribe if you want to see the next steps of the Mr2 Build!
#toyota #mr2 #zzw30 #1zz #2zz #2zzge #bcracing #coilovers #suspension #tuning

[@marciosilva89]

Thanks for the build series. Even tho I don't have an Mr2 it's still a nice watch. Thaks for adding the prices in the video.

[@JesseSpec]

Hey Buddy! Thanks for your comment! I hope to see your S2000 Soon on track too!

[@twodoorpapi]

The build is coming along !

[@JesseSpec]

Leo Fasel thanks man! Now that we know whats needed, we can start building!

[@andresllano2348]

Thanks for the informative video! doing the same swap here in the US!

[@JesseSpec]

Hi Man! Thanks for your comment! Its well appreciated! If you are interested in further information, make sure to check my 2zz swap playlist that gives you all the steps I have taken until now (its still in the making). kzbin.info/aero/PLAE1Fn5XwQh8z5_BjARrIIKqHYHpqw2kQ I just dropped the old 1zz Engine yesterday so there will be a new video on this series this week! Thanks and have a nice day!

[@riehandschin-tsunematsu3552]

Good video 👌👌😍

[@JesseSpec]

Rié Handschin-Tsunematsu thank you 👍🏼👍🏼👍🏼

[@tkk5582]

Hi Jesse, vor einem dreiviertel Jahr habe ich mir auch einen Mr2 gekauft und war sofort begeistert.(Der Winter war sehr spaßig .) Nach eingängigen Recherchen und durch Videos auf KZbin musste dann auch noch ein Corolla TS her. XD Ich habe schon viel Recherchiert und konnte meine Englischkenntnisse dadurch zwar sehr gut erweitern : ) aber letztlich war ich auch froh, dass ich deinen Kanal gefunden habe. Wirklich sehr gute und gut dokumentierte Arbeit. Ich habe das gleiche Paket von MWR gekauft wie du und möchte aber erst einmal die originale ECU vom 2zz verwenden. Kennst du jemanden der das schon so gemacht hat und ob es ausreicht den Chip vom Schlüssel zu tauschen? Um den Kabelbaum am Steuergerät anzupassen wird vermutlich von beiden ECU´s der elektrische Schaltplan benötigt oder.......?! Würd mich sehr über eine Antwort von dir freuen. Vielen Dank und weiter so....

[@JesseSpec]

Hallo, danke für dein Komentar! Mein 2zz swap lauft auch mit dem original 2zz ecu ;-) wenn du alles so machst wie in mein videos mit den gleichen teilen und auto dann wird es auch bestimmt genau gleich funktionieren ;-)

[@tkk5582]

@@JesseSpec Hi, achso gibts dann noch andere Videos mit der originalen ECU? Dachte du hast ein Apexi Steuergerät. Das Geld wollte ich mir für den ersten Moment erst einmal sparen. ;)

[@JesseSpec]

@@tkk5582 wenn du alles machst was ich in den videos sage, einfach nur mit dem original ECU und schlüssel chip, wird das auto auch anspringen und fahren ;-)

[@tkk5582]

@@JesseSpec Okay cool, ich werde berichten wie es lief. ;-)

[@JesseSpec]

@@tkk5582 gerne 👍🏼

[@HanshinImports]

👍🏼👍🏼👍🏼

[@lucaballardini1]

To which exhaust system did you install the header and was it a bottleneck? I heard standard 1zz-size exhaust is a big bottleneck on the 2zz.

[@JesseSpec]

Hi, it wasn’t really restrictive. I used the Fujitsubo Power Getter (made 206bhp). See my other videos for more information

[@williamdavalos2219]

are there are other parts i should get for supercharged 2zz?

[@JesseSpec]

Hi, I never did the SC conversion but it should be very similar. Use this list as a starting point and add the extras if needed as you go 👍🏼

[@CJ-pe5dl]

I know you're swapping to a Honda but what grade fuel is best for a 2zzge N/A engine?

[@JesseSpec]

No problem man ;-) my car was mapped on 98 octane.

[@graveyardrumblers]

Monkeywrench racing in Michigan is by far the best place for anything 2ZZ.

[@JesseSpec]

Yep, they are good!

[@nvl2691]

Tu devrais peindre la "head cover" en noir, ça accentuerait vraiment l'apparence du moteur une fois qu'il est dans la MR2 :) Tu approuves des pièces de chez MWR?

[@JesseSpec]

Hello, Merci pour ton commentaire. Ne t'inquiètes pas, il y aura un peu de peinture qui va trouver son chemin sur le moteur ;-) Pour les pièces MWR, je vais les tester. On verra bien ce que ça donne :-)

[@nvl2691]

@@JesseSpec ça pète :D je viens de finir la vidéo, tu l'as trouvé ou la Corolla à 1800 chf avec 170'000 km :-O

[@JesseSpec]

@@nvl2691 Merci beaucoup! En effet c'était un très bon prix. Il faut être patient :-)))

[@hankschrader3085]

Since you already had the 2zz harness that you aren't using, why not just strip out the lift harness from that instead of buying one?

[@JesseSpec]

So I can sell the stock 2zz harness instead of destroying it...

[@kareembell1164]

What about the air injection ports??

[@JesseSpec]

Hi! What about them?

[@kareembell1164]

@@JesseSpec Are they blocked off by the header you bought or will you block them off with studs?

[@JesseSpec]

@@kareembell1164 hi, if you are talking about the EGR system in the exhaust manifold, yes I ditched the whole system. By the way, my exhaust setup video shows this with great detail, you might want to check that video out

[@kareembell1164]

@@JesseSpec Will check it out.

[@cg5044]

Building a S2000 Hunter?

[@JesseSpec]

Christian g the focus is the Lotus Elise 2zz hahaha but lets try to smoke some AP1’s too 😂😂😂

[@tizianomascioli7699]

È possibile montare l ECU originale? Se si.come?

[@JesseSpec]

Sorry I can’t understand

[@joseguerra4520]

En puerto Rico lo que hacen es ponerle el colector de admisión y escape del k20 al 2zzge ya que el ppe vale muchísimo dinero se piensan que venden para un Lamborghini y no se dan cuenta que es para una basura de motor que encima las piezas caras y no dan prestaciones a penas, deberían de recapacitar y fabricar algo para el motor 2zzge que no ay nada y todo es caro así no lo quieren

[@JesseSpec]

Puerto Rico surely has different part supply problems… by the way thank you for so many comments 😁👍🏼

[@georgmoro5594]

Germanien Untertitel

[@JesseSpec]

Do you mean German subtitles?

[@georgmoro5594]

@@JesseSpec sorry😏