FAIL!! When Plastering Goes Wrong...

If you want to learn the basics to plastering and learn how to plaster your own walls then join The Plastering For Beginners welcome Course. It's a free plastering course ideal for anyone who wants to learn how to plaster: plasterersblueprint.clickfunn...
Todays video is all about dealing with issues in Plastering when they arise. What do you do when the plaster starts setting and you don’t have the time to flatten it??
That’s what this video is all about!
I’ll show you what to do when Plastering goes wrong and show you some massive tips on how to avoid it for the future. It’s a big one so stick around.
Please feel free to leave a comment because we'd love to hear from you. And if you like this video then please like and subscribe to our channel from the link below:
--
/ plasteringforbeginners
--
And feel free to leave a comment because we’d love to hear from you!
Cheers.
Blaine Gray
Plastering For Beginners

[@dilligaf2386]

I'm not a pro plasterer I've done a few walls and ceilings and it is so stressful. I don't feel as bad after watching this video great stuff.

[@simontemple4664]

Probably the most realistic and best video out there over the life off a plasterer to learn from and what we come across,the most simple jobs can quickly turn into a nightmare..well done Blaine you are a great ambassador for all up an coming plasterer,s and even the old ones like myself.

[@PlasteringForBeginners]

Thank you so much Simon! I really appreciate that mate - it means a lot to me, especially coming from a pro plasterer! Cheers pal, hope you’re well 👍

[@tough2lie382]

I admire the fact that you admit when your struggling. That's the reality of the trade, especially with old houses you never know what you're getting into. We'll done by the way. Take a tip from a older plasterer, if replastering old houses keep your hits smaller to allow for unforseen problems. You probably know but anyway respect and good luck to you.

[@richardjordan7029]

Couldn’t have said it any better 👍

[@PlasteringForBeginners]

Thanks guys. Really appreciate you watching and thanks for the feedback - your legends. Cheers 👍

[@paulclare2431]

Hi blaine i agree i was supprised how big of a hit u put on especially when u ad different suckions in one hit ; anyway nice job blaine

[@anthonycairns3869]

Was just gunna say same smaller gauge, Also sbr the wall twice, but we've all bin there , pitty you cant get carlite finish anymore far better than multi in my opinion. Well done tho mate

[@adrianprice4388]

Thanks for the video. I’ve been struggling to plaster onto non-standard backgrounds and seeing you handling it has really helped. Cheers

[@daheath7242]

I'm not a plasterer by any stretch, but I now recognise how difficult this job can be, well done 👍

[@PetiteBluebirdgirl]

Just ripped the plasterboard off my partition framed wall which I built. ..the plastering was a MASSIVE FAIL! I wanted so much to be able to plaster that partition wall. At the moment I am ½ way through fitting my kitchen which I self designed; it is a breeze compared to plastering and although I have taken down the plasterboard, I know from watching you Blaine, where I went wrong. 1) watching other channels prior to finding you two weeks ago, I installed the metal corner beeding straight onto the drywall. After watching your goodself, I realised that it is best to plaster the corner first, press beeding into place and then staple. I just put the filigree metal beeding straight onto the corner and used Knauf Fill and finish 60. I tried to get the external corner right but found that I had created a dip. 2) MY NEXT BIG FAIL! Yesterday after watching your channel the most (you are amazing), I purchased British Gypsum Multifinish, I decided to give it a go. However, I accidentally added the BG to tepid water.. this ruined the plaster mix. I calculated it just like you said 12½ litres water to 25KG of BG - 1.2 litres of water to 2 KG of BG, but the warm water "cooked it" and although it looked *thin (due to it be like custard - which thickens as it cools), the plaster went off and became unworkable. Also, *because it looked thin, I added more BG to the mix.... big mistake! 3) Mistake Mistake Mistake and FAILURE... making up a batch and taking too long to apply it.😂😂😂 Anyway, Blaine I haven't given up. This week I am enrolling onto a taster plastering course.. 🎉 Love your channel, it is the best!

[@lennydrummie4293]

Completely agree that keeping your calm is the biggest thing. Love that you make videos about all aspects of plastering. So real 👌🏼

[@PlasteringForBeginners]

Cheers pal!!

[@nickyscott383]

I was surprised you decided to do a big hit knowing the circumstances of the hardwall....brave man 🤣 I always test the background with a bit of skim first....Apply a patch to the hardwall, hit the ceiling and and test the patch to see how it's pulling in, if in doubt, leave it out for its own gauge for an easy life 👌👊👍 Great work buddy!

[@ChrisKavanagh-df6fh]

That was a big guage on his own

[@ryancline6128]

As a plasterer these are dreaded moments of the job. Well done staying composed, still picking up the camera and delivering a good finish 👏

[@PlasteringForBeginners]

Thanks pal!! I appreciate you watching it…cheers

[@Carsick8]

That was going to be my comment, even with a rapidly drying set he's still setting up the camera for each shot and talking through

[@lastof4512]

Always love your vids learn allot and it helps to keep on top of the new products cuz those speed skims are a godsend 👍👍

[@martinh7620]

man you are great guy, i have been watching your tut videos for some time and man i learn a ton thanks man for the effort and stamina

[@ryankane7684]

Fair play mate. Crazy how we all go at things differently I personally would of put less on if I knew I had a few walls with more suction on them its hard to tell the size of the walls on the video but it looks like a decent lift of skim you put on. Am based in Northern Ireland and very few boys would do wet angles we always break up unless it's small areas but if there's a few days work in it we,d break up the walls from the ceiling. But no criticism here it's good to see a man with passion n pride in his work. I always just wonder how yous guys that do the videos have the time to do them 😂 as the plastering always keeps you busy 😂

[@MarcusT86]

Excellent work Blaine. Amazing you kept on top of that!

[@PlasteringForBeginners]

Thanks matey!!

[@Yorkrenderingspecialists]

As a plasterer I agree buddy its a stressful job and the most important thing is keeping your cool in situations like yours, the jobs that look the easiest sometimes turn out to be the hardest well done mate great videos👍

[@PlasteringForBeginners]

Totally agree mate! Thanks for the comment and thank you for watching. I really appreciate it 👍

[@Truman77.]

I used bonding and left it to completely dry. As soon I put the top coat on, it started setting very fast and it was stressful. Just had to keep going and now I understand why. Thank you.

[@PlasteringForBeginners]

👍👍👍

[@A.S.P.R.]

Nice tip re: the grip bond and staple gun. I will set the corner bead into the base coat usually, but its always good to have alternatives.

[@gracebateman777]

These "when things go wrong/when we mess-up videos" are SO invaluable as they REALLY help us learn! What a humble honest guy who isn't afraid to admit mistakes or learn. You're a terrific teacher, I'm loving all your videos. P.S I love the staple gun idea!

[@paulcloona9331]

Thats very well done. Nothing as bad as same room and different walls drying at different stages. 👌

[@fenixfp40]

Useful advise, and reassuring to know it’s not just me that gets in trouble. Cheers

[@PlasteringForBeginners]

Thanks for watching mate!

[@Matt-yl2ok]

Nice spray down with water to start with .. then couple of thick coats of pva applied with a thick sleeve sorted 👍🏻 I feel your pain tho as I’ve been there a few times 😅 hard trade for sure 💪

[@PlasteringForBeginners]

That’s the one mate! Thanks for watching and it’s great hearing from you…cheers pal!

[@ryno8547]

I have plaster half my farm house now and I learned everything from you,you have learnt me a lot so thank you so much

[@PlasteringForBeginners]

Thank you for watching my friend. I really appreciate it!!

[@ryno8547]

@@PlasteringForBeginners I have just bought a speed skim I dint buy one before because I thought I wasn’t good enough to use one omg there amazing I should of listen to you and got one straight away what a difference everyone should get one thanks agen

[@Cybertruck1000]

Great job you are doing educating and giving to the community. From a fellow Manc...

[@simonanderson1191]

Fair play to you, very honest and I learnt a lot from it. Good work 👍

[@PlasteringForBeginners]

Thanks for watching mate!!

[@derryjones1029]

I used to panic and stress when this happens now i know it will be ok in the end aslong as u keep at it and dnt give up good video u pulled it back and nailed it good job

[@uncensored5104]

I wish you had done this video a few days earlier. Im no plasterer and had the exact same issue after leaving hardwall to go off over a few days! I gave it 3 coats of pva (wish I had known about the SBR as I have some of that as well) as it was just sucking it in like a sucky thing! The multifinish was going of quicker than I could get it on the wall but I got there in the end, but I did end up with some crazing which I had to keep wetting and trowling to get rid of it. Every day is a school day and I wont make that mistake again now I know what the cause was. Thanks for the vids and keep them coming, as you have turned me from a complete novice to someone haft competent 👍

[@aabb6677]

EXACT same experience (and resolution) - 1 week plastering course doesn't prepare you for this! The other thing for anyone watching with limited experience is the sheer hard work involved - I could not have done the hardwall and finish on the same day - that's aging for you...

[@Partytimepete]

Brilliant video Blaine. How you remain composed enough to get a good finish on such a big hit was amazing. I think I would have gone home and come back the next day with a belt sander 🤣

[@malthomas3311]

Fair play, happens to us all! 🙈🤣 I'd have probably saturated that hard wall with the mist setting on the hose before I skimmed it. Easy with hindsight though! 😁 Great vids by the way! 👊

[@andywest3260]

Thanks for that i was using PVA and found it was bubbling up after i was finishing off the last trowel then i just had to give it a rub down to get rid on spots

[@superjaxx99]

Hi Blaine great video. Hope you get better soon.

[@PlasteringForBeginners]

Cheers pal!! Hope you’re well

[@soothsayerbh1038]

I thought this was gonna be a fail it turned out to be a great job

[@garymuir4695]

Fair play to you mate, what an effort.

[@rickjohnson1632]

Thanks for the tips 👍

[@PlasteringForBeginners]

That’s for watching mate!

[@asaxon9751]

Awright mate, great video, have you tried the the additive called Extra time? It doubles the set time of multi, even though it will still take up fast, it will give you time to catch up on yourself

[@kendodd8734]

Yeh a good call it’s a god send on ceilings in the summer when they wanna dry out so fast that gear buys u the time u need to flatten in properly

[@virtualunreality8326]

You are so skilled.

[@paulashford4155]

Looks great in the end. I am not a plasterer. If you ever encounter a terraced stone house like I live in, where the salts come through, plaster falls off, no cavity wall etc, please do a video on rendering for that damp issue. Rising damp??

[@rheiannacallumkyle]

Oh man been there got the badge!.That's why I keep a couple sachets of extra time in my box it really does help.plus I'm getting old and slow is good nowadays.

[@patricklonergan7493]

Lovely job

[@thelancashirecarper]

I love your videos they are so helpful, I have recently done my property maintenance course and love the plastering and rendering . I am about to do a ceiling for the first time, It is just plaster board. I was just going to plaster a thick coat then a thinner coat without PVA is this a bad idea? I have also just bought the Ragni flex lite thanks for the heads up. That will help me polish the plaster at the end. 😅

[@777cygnus]

You do great work Man 💪😎👍

[@PlasteringForBeginners]

Thank you mate!!

[@petermorris9284]

Hi Blaine enjoying watching your vids cheers. I once SBR'd a painted ceiling of my own, just tried it rather than PVA - the next day all the plaster dropped off lol!

[@CherDele]

😂😂😂😂 sorry, I had to laugh!!

[@NiktheEnglishGreekCypriot]

That’s weird, I’ve switched to sbr and it’s been brilliant, no issues on the last few jobs. Starting a big 4 bed tomorrow, gonna sbr all the old walls which are lathe and plaster. Then render mesh to strengthen it up. Ceilings are over boarded so hopefully no issues with my ceilings!

[@ocendo1]

Thank you man for such a nice videos.Some of products that you have used are rubish like plastic trowel 90 cm.Best for diy is 60 cm stainles stee on plastic and refina super flex 18 inch.Rest is not for real if you use finish 5 grade on lamp,like Knauf super finish premixed.

[@PlasteringForBeginners]

Cheers matey!! Thanks for watching

[@chuckyz4016]

fair play keeping on top of that set, I can imagine how fast them walls were setting on top of that hardwall and it stinks lol. Now its warming up I keep a pressure bottle like they use to spray decking with full of water just incase anything needs spraying down

[@PlasteringForBeginners]

Haha it does smell funky doesn’t it lol!! Very true my friend - thanks For watching. Cheers

[@CB-pt2uo]

Mate love this video most people won't show this .

[@PlasteringForBeginners]

Thanks pal. I really appreciate that!!

[@chrissigsworth3357]

Great vid mate as always,we've all been there,and your right it is bloody tough,but well rescued pal

[@PlasteringForBeginners]

Cheers pal!! Thanks for watching my friend. Hope you’re well 👍

[@chrissigsworth3357]

@@PlasteringForBeginners Iam all good cheers,hope your feeling better,keep up the great work mate

[@stevenedwards2162]

Retired two years ago thank God after 49 years of it , plastering has changed so much since I started , I remember when there were no beads for plaster or render no self adhesive scrim all corners and drips returned with woods , but that's another story , remember using hardwall on price in the Prince of Wales hospital massive job mixed the stuff in cement mixers , after completing a room the Clark of the works would Come in with his own feather edge checking fo hollows and straightness and plum , he was a nightmare to all of us plasters on that site , yes we've all been there mate sometimes we wish we layed on more and sometimes less , it's a stress job no matter how experienced we are , I have respect for all in this trade well done mate 👍

[@steveworkman4289]

I dont want to sound like an old twat Steve, few people today would know who a clerk of works was 😳✌️

[@PlasteringForBeginners]

Fair play for your time matey! It sounds like a totally different world back then where the standards were to the highest regard. Massive respect and thanks for sharing your background. Cheers…all the best 👍

[@christopheregan6697]

Well saved. Great plastering from a fellow plasterer.

[@PlasteringForBeginners]

Thanks pal!

[@stevengordon2145]

Fair play for showing a failure.. personally when I'm using hardwall I gule everything especially plasterboard that's had HW on without exception. I've watched it failed on an apprentice and that's was enough for me. Bonding got more body also find knocks up better..and pinks over lovely.

[@PlasteringForBeginners]

All good points my friend - thanks for watching. I really appreciate it…cheers

[@pcno2832]

6:47 "It's wicked"! Almost like something I'd hear in Boston, though we're even more inclined to use "wicked" as an adverb (wicked-good, wicked-pissa, etc.) . PS: Glad to see that your recovery was quick. Food poisoning can be a brutal foe. Thanks for sharing this story.

[@eire5507]

The spray bottles are a good job for spraying the wall down for the suction before putting pva on. They are also good for trowelling up they leave the wall with no fat works. Anyways nice video👍

[@PlasteringForBeginners]

Very good point mate! I was just sick of them breaking all the time…and I love the feel of a brush. I can’t replace that 👍

[@Mjflyer]

In that situation I two coat pva over the hardwall. I’d skim the ceiling and fireplace then concentrate on the walls separately. Plasterer of over 25 years and never had a problem using pva ! Enjoy the videos tho !

[@PlasteringForBeginners]

Great advice and thanks for watching!! Cheers mate

[@richardjnewman6182]

I wouldnt have diluted the SBR myself..... Well done for showing people the 'dark side' of Plastering 😂 and fair play for getting it on 💪

[@AO-LetsGo-]

Pulled it out the bag there bro well played 😏

[@chrisswan3986]

How you could make a video in those circumstances is beyond me . Its mad how we're all different for focus. My focus would be best playlist blasting in my ears. Ive never used hardwall on board. Mind when i was an apprentice a guy in the class did that instead of bonding and im pretty sure it fell off in 1sheet off the board and the lecturer made an example about using the right materials for the right backround. Enjoy your videos. You show the good and bad 👍

[@PlasteringForBeginners]

Haha I don’t know how I did it but it wasn’t fun 😂😂 thanks for the comment and thanks for watching matey…I really appreciate it. Cheers pal

[@colmmakim6675]

Great work,Great recovery 👍

[@usandthem4700]

Sorry for the random question, I’ve just had my kitchen tanked due to damp, he’s told me not to pva first to just go straight over it in limelite? What would you recommend?

[@kevinlawes591]

Nothing worse than that stress when it's all gone belly up! Had that myself last week never used blue grit before didn't mix enough skim! Got it in the end thankfully know now for next time! The learning curve is massive lol

[@PlasteringForBeginners]

Exactly that mate! Nothing worse!!

[@kevinlawes591]

@@PlasteringForBeginners quick question mate what's causes blistering also like little holes which are murder to fill in with the second coat! Only get this when I'm over skimming or going over bonding?

[@PlasteringForBeginners]

You’re applying your second coat too fast. Because the Bonding is rough if the first coat moves then it creates air pockets in the first coat. Once the second coat is applied then the air can’t escape. If you let the first coat take up a little bit then the first coat won’t move which means no air trapped. Hope this helps pal 👍

[@davidmcmanus1094]

we had very similar experience on Friday.. we follow a builder who builds cabins so always plasterboard work. this recent job he ripped out a kitchen and prepped the walls himself. I got told he gave it 3 coats of pva. anyhow such a simple jobs skimming 4 walls turned into a nightmare. it's the closest to losing a set I've experienced. it just pulled in rapid..!! when we finished we saw a bucket with some pva in it. it must of been about 80%water to 20% pva. the mix was so weak. from now on I will always pva myself. in them situations my advice is to just keep calm, get your angles and around sockets right and the middles will sort them selves out.

[@PlasteringForBeginners]

There’s nothing worse than a builder who’s prepped a wall with piss wet PVA. It happened to me so many times in the past until I decided that I’d do all the prep…Because it bites you in there arse others wise ha! Great hearing from you. Cheers!

[@mickbaker7573]

Well pulled back 👍👍👍👍👍

[@PlasteringForBeginners]

Cheers matey…thanks for watching!

[@DavidHanson-nq3ww]

If you're only patching up, I find mixing driwall adhesive with bonding is bang on.

[@novacooluef]

I'm getting ready to plaster over drywall that had been flipped over so we will be plastering the back side. I read somewhere that putting primer on would make it go right through the board and not lay on top as it would would applying to the front side. What is your experience? We have done a closet without primer and it seems to be ok We are also using the blue drywall in places. Does it require the primer? Thanks for your helpful videos!

[@Zeus-kj7nn]

Us plasterers are warriors mate! Great video. 👍

[@PlasteringForBeginners]

Ha that’s the one pal!!

[@projectlez1]

Great video dude

[@PlasteringForBeginners]

👍👍👍

[@ashley89837]

Have you got a video on glancing light? great work btw

[@richardpowell9238]

Amazing videos, I've been plastering for about 8byears now and still loads to learn that's why I watch you videos. One question. Would you use bonding or hard wall over artexed walls?

[@Mjflyer]

Bonding !

[@ccb3313]

I always found a wetter mix pulls in quicker on high suction backgrounds a little bit thicker skim and a fatter first coat will see you through

[@attila87]

Firstly thank you for these videos. Can you please help me? What if I left the second coat dry completely for 2 days but it still need the skimming coat. Is that ok to use PVA and just carry on?

[@JJ.property.repairs.]

use the sbr straight not diluted and allow it to fully dry before skimming. It will kill suction completely, hell of a work around though. Your videos are brilliant and its good to see how problems do happen and how to get on with them

[@Rezzerect]

Hi Blaine. Love your work and videos mate. Really helped me out in my new plastering career. Just wanted to ask your opinion on Make Good Bonding? I used it to sort some horrible walls in a property recently and it came up great for plastering over. Just wanted your thoughts on it, man.

[@PlasteringForBeginners]

I’ve not tried it but it’s funny you said that because someone else here said the same thing. I’ll be trying it because I’ll be honest, I don’t really like BG Bonding. It can bubble up so I’ll be trying that “Make Good”. Cheers pal 👍

[@xyy8774]

Thanks for sharing. I need to finish the bottom of a large bulkhead. Spraying is not practical. What is an alternative to wet the plaster. Thanks.

[@Lemon-squeezer]

I don’t miss them days when I was an apprentice we would float a room out in one day with browning then skim it the next day I would soak all the walls down with a hose before we put sbr on them and it still pulled in like mad i guess it’s what made me quick at skimming but I loved skimming over sand and cement

[@PlasteringForBeginners]

Fair play to you mate!! Respect for your time served and thanks for the comment. Great hearing from you pal 👍

[@Britboy2877]

Plasterer myself, Hardwall is a bloody nightmare if left 2 days onwards even after unibonding. Im sure all us in the trade have had this happen on more than one occasion. Nice job fella.

[@PlasteringForBeginners]

Very true my friend! Thanks for watching and thanks for the comment…cheers 👍

[@CaptianGaming1]

Thanks

[@ThePlasterer]

I've been there more than once mate, nicely saved, once you can breath again it's such a relief 😄 Have you tried mitre glue for sticking beads? I use it all the time now, instant and clean👍

[@PlasteringForBeginners]

Haha tell me about it mate - I hate it when it happens. I haven’t but I’ll definitely be trying it now! Thanks for the heads up…I really appreciate it. Hope you’re well and we’ll hopefully speak soon 👍

[@cardinalultras5484]

Nothing like old hardwall it goes off like a rocket 🚀 been there too 😩 great video

[@PlasteringForBeginners]

Cheers pal!!

[@benpatfield5471]

Is that a 16 inch or 14 inch your using?, great video by the way respect to you for giving everyone an insight in some of the struggles we come across as plasterers 👌🏻👍🏻

[@reedy8585]

great videos I have a question though do you use pva on bonding if you are going over it the same day ?

[@Trekz86]

no

[@glenn3762]

Would you use bonding if you have a plasterboard brick transition or hard coat? I've blocked off an old wood fireplace but the side protrudes by a brick and a piece of plasterboard would protrude too much.

[@iantincangleed4702]

Well done, ace

[@PlasteringForBeginners]

Cheers pal 👍👍

[@benmaunder2016]

Do u ever use sbr under your scratch coat when u render

[@tomgayle2849]

a mate gave me a bag of board finish, can i use it like multi finish .can you tell me about board finish i am working on a 1930s house interior walls.

[@brendanosullivan3664]

Shit happens mate but fair play to you putting this video out I am plastering for 40 years and I know how you feel when it goes against you we have our good days and bad days that's life

[@PlasteringForBeginners]

Thanks matey! Great hearing from you again and I hope you’re well my friend. All the best 👍

[@stuartswanuk]

Wow after 40 years how is your physical health?

[@owenbutcher1954]

Well Done 👍✊

[@PlasteringForBeginners]

Cheers pal!!

[@ianbridges7929]

If I can't plaster same day and I pva or sbr the next day do I plaster whilst sbr or pva is still wet or does it have to dry first?? Thanks for any help

[@CheckFred]

:-) Fair Play for showing the OOPS! moment .... We've ALL been there ....The Summer of '76 was the WORST!! - Thankfully 'without' a video camera present ;-)

[@PlasteringForBeginners]

Haha thanks pal…I appreciate you watching! Cheers 👍

[@fubar.1]

Would putting sbr on neat be better, would like to know your thoughts, cheers

[@AngusRobins]

Great content and nice edit, love the warts and all approach, thank you. Must ask…why did you use plasterboard in the fireplace?

[@matthewedwardfield]

Yep...thats a no no. If they are using that fireplace/log burner he needed a special board.

[@AngusRobins]

@@matthewedwardfield yes, as a registered HETAS installer there is an onus of due diligence to check the specifications and manufacturers recommendations when looking for an appropriate board

[@davetaioneshu5226]

Also if the hardwall has taken up beyond recovery just take off the ridges and mix up a wet third coat. Not ideal but saves an hour of panic and helps you not totally lose your head.

[@PlasteringForBeginners]

Good shout!! Cheers pal

[@oldskoolxp]

Hardball and bonding mixed is top. Also sticking the beads on like that can cause the scim to slide

[@voodoocars2134]

I never use hardball. Only ever bonding. I’m half way through doing a whole house over artex ceilings. I’ve done loads over artex but this house the multi is going off so fast I can barely keep up with it. I even put on 3 coats of pva but it still pulls in really quick. Nuisance..

[@djmickyk1]

I would have sent the hard wall back and got bonding :) Bending over backwards to accommodate people that don't appreciate the very hard job we do is so annoying, been there many times.

[@PlasteringForBeginners]

I should have done just that mate!! Very true

[@imtitsupdickielala12]

Fantastic honest video…👍

[@JLSfootEKB]

Ive managed to get myself into a pickle half done a ceiling with this stuff and it dried so fast its just a mess now, tried sanding it out but thinking about just trying to take it off somehow and starting again but how to go about it

[@brendanosullivan3664]

Hi Blaine when I use pva I get a paint roll when using plastic I find it easier and faster

[@PlasteringForBeginners]

👍👍

[@gavinfitton6111]

Well done Blaine, thanks for the vid. Really useful. Silly question time: can you apply multifinish directly on plaster board without pva? Was going to do that on my ceiling in bathroom. Also with keyed bonding on walls does that need pva before plastering? Thanks

[@benpye2102]

Don’t need to PVA on plasterboard but I always would on bonding

[@gavinfitton6111]

@@benpye2102 thanks mate

[@andywest3260]

What sort of mixing paddle do you use

[@Offensiveword]

I use the hook angle beads … nice n easy

[@Trowel1892]

Top job not a fail that ! You just chased your tail all day it happens ! I would of give the hardwall once first coat of skim a good neat pva over the lot for second skim coat .

[@PlasteringForBeginners]

Thanks mate! I really appreciate that…thanks for watching 👍👍

[@golferuk2011]

What is the best way to render on top of brick, the brick has a shiny finish and doesn't look a good key

[@paullinn1312]

Been there mate fortunately I work with the council now so there's not much of panicking

[@PlasteringForBeginners]

Fair play my friend!!

[@carld9451]

You done well there lad mixing ye Owen gear and getting all that on it's a job on it's own mixing and feeding ye self back breaking work I no av done it for over thirty years I only do the odd day now thank God

[@PlasteringForBeginners]

Fair play to you mate and thank you for watching! I really appreciate it 👍

[@brendanosullivan3664]

Sorry Blaine my first message when I use pva I get a paint roll over old walls I find it easier to use and quicker than a brush

[@PlasteringForBeginners]

👍👍

[@glenmiles6279]

Probably best to plaster next day after soaking with SBR,needs time to seal.