First Ride On Restored 1987 Honda Cr80 Dirt Bike!!!

  Рет қаралды 68,615

2vintage

2vintage

Күн бұрын

Пікірлер: 352
@2vintage
@2vintage 4 жыл бұрын
$1=1 entry. Winner will get this bikes shipped to their house for free! www.gofundme.com/f/restoring-vintage-honda-cr80?+share-sheet Thanks for watching and subscribing! New video coming tomorrow morning!
@jackhiser8156
@jackhiser8156 4 жыл бұрын
Hey 2vintage if you ever run across any Honda xl 250s Lemme know I need some parts trying to finish up my restoration thanks
@2vintage
@2vintage 4 жыл бұрын
@@jackhiser8156 we have a few xl250 parts on Laptwo.com
@2vintage
@2vintage 4 жыл бұрын
@@jackhiser8156 but ill let you know if i find one!
@Zach_Tv
@Zach_Tv 4 жыл бұрын
Hey I have the whole pipe at my shop I’ll take 85$ for it
@2vintage
@2vintage 4 жыл бұрын
@@Zach_Tv for an 87?
@Nfl..prodzz
@Nfl..prodzz 4 жыл бұрын
This has to be by far the best restoration on the channel! Keep it up.
@rigguyjt
@rigguyjt 4 жыл бұрын
I don't know about that seat. It looks like someone was drunk when they re-covered it.
@stevenfarraway
@stevenfarraway 4 жыл бұрын
the seat foam is missing chunks
@usmcchet1
@usmcchet1 4 жыл бұрын
hey boss get a picture of a cr80 and look at the seat. that seat you have take it apart and shave the foam that seat looks horrible
@lance_2740
@lance_2740 4 жыл бұрын
I think the seat looks fine
@evoracing5563
@evoracing5563 4 жыл бұрын
OMG, thats things running terrible 🤦‍♂️ Did you even attempt to set and jet the carb?
@amandapukallus5583
@amandapukallus5583 4 жыл бұрын
Ok did you watch the whole video the pipe in the muffler is missing and it doesn’t have packing
@amandapukallus5583
@amandapukallus5583 4 жыл бұрын
WATCH IF YOU WANT TO HATE ON HIM GO WATCH SOMETHING Else
@pyra6517
@pyra6517 4 жыл бұрын
Maddog Mx it’s triggering me how people are saying it’s running bad. It’s running good with packing and all it will be mint
@evoracing5563
@evoracing5563 4 жыл бұрын
@@amandapukallus5583 If you think that bike is running great. Then with all due respect, you need to stay away from motorcycle. The thing with "Vintage" is, he starts off good and ends up skimping on essential parts. Oh and btw. I can watch what I want and comment how I want. A mature person can take criticisms. Trying to give the guy advise, so rather go play with your Lego.
@evoracing5563
@evoracing5563 4 жыл бұрын
@@amandapukallus5583Packing or no packing in a End can has absolutley nothing to do with poor tune and jetting.
@gtisid
@gtisid 4 жыл бұрын
never done baffle tube welding but it can be done as a bike i had last year had it done. 2000 grit is what you finish with not start with on the plastics. start with 300,450,600,800,1000 then 2000. keep going it’s looking alright. you get annoyed every time you spend a buck , which is why bike restos are a hobby for most.
@2vintage
@2vintage 4 жыл бұрын
No I just get annoyed when i buy the wrong part because then i have to ship it back and wait for the new part to come which takes forever. It's more if a time thing than money.
@gtisid
@gtisid 4 жыл бұрын
2vintage that’s how it works with ebay, got a whole pile of stuff in my shed courtesy of crap ebay sellers. sell it on once you found out what it fits. it’s the last few things you do on this bike that will make it or break it. caught a glimpse of the next project to (kx) good luck
@jordansbikes819
@jordansbikes819 4 жыл бұрын
Why didn't you just jetwash the paint off after letting the chemicals sit? Seems abit long sat there with a card scraping it off lol not hating just a question
@aitosuomalainen7283
@aitosuomalainen7283 4 жыл бұрын
I love this bike! In my opinion you did a good job! And i know you may be clueless at some points but listen every hater over here, everybody learns from their mistakes. You dont have to rage in the comments. Just shut up and leave this poor man alone, i enjoy his videos even though he might sometimes be wrong! ❤️
@megamindtvsydney3967
@megamindtvsydney3967 Жыл бұрын
Awesome. I had to watch this build again.. just going through watch few earlier episodes! It’s Awesome how you take the time to do things nicely…
@waltterilaukka
@waltterilaukka 4 жыл бұрын
Just weld a pipe in the muffler and make some holes in it
@rollafatonedude
@rollafatonedude 4 жыл бұрын
or buy perf tube and weld it on its very cheap
@rickjames4630
@rickjames4630 4 жыл бұрын
HA!! Yeah right. That'd cost to much money!!
@andrewflowers3910
@andrewflowers3910 4 жыл бұрын
I actually did that on my yz125 and it sounds great
@gregmaggio5217
@gregmaggio5217 2 жыл бұрын
It's gone from basket case to actually rideable, but it's keeping you busy, your mom doesn't mind, so that's cool.
@chandlerparks278
@chandlerparks278 4 жыл бұрын
He have never broken in a motor just rebuild them and hold them wide they last just as long and don’t have any more or any less power
@TheTommyboy864
@TheTommyboy864 4 жыл бұрын
Yeah Dude, Whoever sold you that seat should be strung up,,, lol,, I could'nt take my eyes off of it... Black would look 10 times better, Other than that the bike looks great. I'd love to own it,,, i had one back in the day when i was a kid and that 80 was pretty quick and loads of fun! Peace!
@georgeduckworth4452
@georgeduckworth4452 4 жыл бұрын
My daughter wants me to tell you how great of a job you've done! She's got her fingers crossed!! Lol
@Hanky_Bannist8r
@Hanky_Bannist8r 4 жыл бұрын
Outstanding job Joe, I'm really happy with how it turned out. Restoring an older bike is about as easy as finding parts for one. It's a shame about the silencer, maybe a used aftermarket fmf, answer racing or Bill's pipes will pop up somewhere it would be cheaper than finding or fixing the original.
@Hanky_Bannist8r
@Hanky_Bannist8r 4 жыл бұрын
@CADEN ZUMBRUNNEN that is correct I follow those guys as well.
@thomasgu3281
@thomasgu3281 4 жыл бұрын
Hanky Bannist8r outstanding job ? I hope you’re joking. Bikes don’t run like that
@Hanky_Bannist8r
@Hanky_Bannist8r 4 жыл бұрын
True. But if we just Haze and burn the guy he'll learn nothing to become better. It's a new top end and needs re-tuning to the new piston easy fix.
@thomasgu3281
@thomasgu3281 4 жыл бұрын
Hanky Bannist8r my dad slapped me on the back of the head when I did something wrong on my bikes. That’s how I learned /:
@Hanky_Bannist8r
@Hanky_Bannist8r 4 жыл бұрын
@@thomasgu3281 not all of us learn the same way.
@420motoripper2
@420motoripper2 4 жыл бұрын
Let all of your 2 strokes idle for 15 mins. If they aren’t warmed up then the piston rings will expand before the cylinder and increase wear, this goes for anything with forged internals.
@n2vxc
@n2vxc 4 жыл бұрын
Most the garage he owes won't cold seize. There so warm out. But he will find out
@gokarting1018
@gokarting1018 4 жыл бұрын
Jonny Levins man don’t u know u got to hold them wide open for 6 to 9 seconds gives u more power and warms up quicker
@gokarting1018
@gokarting1018 4 жыл бұрын
Jonny Levins Maby if u want to foul spark plugs before u ride it
@dannyoutlaw8001
@dannyoutlaw8001 4 жыл бұрын
Fyi...when you're removing stickers from plastic it's always been easier to me to use plastic razor blades and lacquer thinner...it does not hurt the plastic. I've done it a lot on sport bikes painting and rebuilding them...great video brother
@funnermedia4465
@funnermedia4465 2 жыл бұрын
1987 best looking color coordination blue seat red plastics love the videos man I'm addicted
@Maga4Lyfe
@Maga4Lyfe 4 жыл бұрын
Great job brother I was waiting patiently for this first ride. I appreciate all your time doing what you do.
@dirtbikeguy72
@dirtbikeguy72 4 жыл бұрын
It hurts to hear a bike running so bad especially at 30:32
@northerncarpfreaks5081
@northerncarpfreaks5081 3 жыл бұрын
I really appreciate the work you do on the bikes people don't realise what it take to eddit a video for KZbin let alone have the bollx to show how to restore bikes well done you keep up the good work your always going to get the keyboard wollys but don't let it stop you 👍
@chrissellers3326
@chrissellers3326 4 жыл бұрын
Don’t diss the kid at least he is doing what he loves and making money doing it. Where are all the haters KZbin channels?
@donaldmaclean1872
@donaldmaclean1872 4 жыл бұрын
chris sellers They don't exist because they spend all their time hating and they have no time for anything else.😂😂😂
@finster7582
@finster7582 4 жыл бұрын
👍👍👍👍👍👍👍👍just a tip- grease,anti-seize,loctite and a torque wrench when putting a bike back together. 😆
@AntiPlatitude
@AntiPlatitude 4 жыл бұрын
This was my very first 2 stroke. Got it back in 1990. Memories!
@johntitus3381
@johntitus3381 4 жыл бұрын
Love the bike Buddy!...I had a 89 cr 250 bike would walk every gear..boy do I ever miss it but anyhoo would luv to have this bike for my son!
@miguelrivea1270
@miguelrivea1270 4 жыл бұрын
Sounds like it's not running right at all are you riding it with choke on 🤔
@gokarting1018
@gokarting1018 4 жыл бұрын
Miguel Rivea some people say u need to run them ritch to break them in not that ritch tho
@miguelrivea1270
@miguelrivea1270 4 жыл бұрын
Right sounds like it don't want to hit powerband
@Exculation
@Exculation 4 жыл бұрын
Exactly what I was thinking lol, either riding with choke on, spark plug fouled or broken/cracked reeds because that thing sounds like it’s getting too much fuel, which can be caused by choke on, fouled plug not giving good spark under compression or damaged reeds causing air loss in combustion therefore too much fuel to burn. One way or another that was running rich in the video bro
@Exculation
@Exculation 4 жыл бұрын
Simple things to check really, new plug and new reeds or flip them over if not cracked or broken, and don’t ride with choke open you will foul the plug, if internally fouled you can’t clean them, not trying to tell you how to do things just good advice.
@slabdaddy4209
@slabdaddy4209 4 жыл бұрын
The cr80 is looking good except for that seat who put the cover on it? Ray Charles!!🙈😝
@michaeldavid9181
@michaeldavid9181 4 жыл бұрын
My first bike I raced was that bike cr80'1987 brand new from the Honda shop in Tulsa Oklahoma
@garethcox1118
@garethcox1118 4 жыл бұрын
Hey man I have a 1995 cr80 and it has spray painted plastic. Did u have problems with the citristrip? It says not to use on plastic and I’m worried it will make the plastics brittle. Any feedback or personal occurrences would be appreciated
@jackhiser8156
@jackhiser8156 4 жыл бұрын
She looks good man keep up the good work
@divergent2619
@divergent2619 4 жыл бұрын
Can always wet sand and buff and polish the plastics. The muffler any decent steel pipe that can be welded with a bunch of holes drilled in it. Then wrap packing around it.
@IAM_THAT_IAM888
@IAM_THAT_IAM888 4 жыл бұрын
Honda Cr 80 -1987 was my first real dirt bike to ride 😍 my actual first was a Yamaha Pw 80 , 3 speed half automatic it doesn’t really count 🤣😂
@johntunstall9698
@johntunstall9698 4 жыл бұрын
With the silencer you can take rabbit wire and create the tube inside and then repack your silencer
@TheDetailer123
@TheDetailer123 4 жыл бұрын
Boom, she’s alive! So cool man.
@HondariderLee
@HondariderLee 4 жыл бұрын
Little bike sure does look a whole lot better......good job on that......oh put some background on the number plates......
@lloydfranks1357
@lloydfranks1357 3 жыл бұрын
Next time you need a seat cover the guys at Ceet racing products can give a few options! I promise you it will look great! And be right. They can send you everything ready to install on your seat pan. Give them a call. They are not the cheapest option! But they sell some of the best work out there. If your doing a restoration you need these folks! Call them you will be glad in the end you did!
@rodneymoreland7950
@rodneymoreland7950 4 жыл бұрын
If you didnt do the crank or at least the crank bearings/seals it will probably not last.
@kevinroberts781
@kevinroberts781 3 жыл бұрын
I have a CR80 from 1987 that needs a rear hub. Mine is busted at the bearing. Any ideA where to get one? I can't find one on the net. Any aftermarket or other years that may work? My bike runs great but it's worthless without a rear hub.
@koolmind1027
@koolmind1027 4 жыл бұрын
Looks great man. Very stoked on this build
@novemberechobravo9925
@novemberechobravo9925 4 жыл бұрын
You might need more fork oil, if you only put 4 " in... should be a measurement from the top of the tube.. just checked and it's 85mm to 110mm from top of fork tube (bled)
@marcruales8050
@marcruales8050 4 жыл бұрын
Your also waiting on a new jet kit for the carb. That bike should not be idling that high.
@MAD450r2
@MAD450r2 4 жыл бұрын
Just an idea for the hole in rear fender. Try and find an old xr rear fender bag it'd cover that spot nicely.
@ronniewilliz153
@ronniewilliz153 4 жыл бұрын
Killer build glade its finished. But man you really need to tune it. It needs opened up on the big end. Its needs more fuel. Notice how itll rev half throttle. An then cut out. Depending on weather an humidity. You have to adjust the air fuel ratio. An altitude has a huge part in tunning.
@FordRanger-ih9wq
@FordRanger-ih9wq 4 жыл бұрын
Bike looks great man 🙂
@captainkirkkirk596
@captainkirkkirk596 4 жыл бұрын
Hell yeah let's go for a ride!
@streetveterans7480
@streetveterans7480 4 жыл бұрын
What did you paint the motor and frame with it looks unreal
@2strokemxclassics
@2strokemxclassics 4 жыл бұрын
Try vht enamel on engines it's the best paint for engines it dusent we're off when oil or petrol comes in contact and it doesn't need heat cured👍👍
@streetveterans7480
@streetveterans7480 4 жыл бұрын
2stroke mx classics thanks man I just got an 87 cr80 and it’s flawless just want to redo the paint Nd make it real nice appreciate that
@2strokemxclassics
@2strokemxclassics 4 жыл бұрын
@@streetveterans7480 no probs man it's really good. I've used the black and the silver on engines and it's very good results.
@rigguyjt
@rigguyjt 4 жыл бұрын
He had it powder coated
@m8fusion712
@m8fusion712 3 жыл бұрын
It looks really nice, a long ways from what it used to look like, good video 👍
@devincornett2121
@devincornett2121 3 жыл бұрын
I wish i would have thought about your channel 3 months back i had a 1980 cr 80 all graphics were in great shape but the entire motor needed to be restored and a few other small things
@lengaming1651
@lengaming1651 4 жыл бұрын
Why do you hold it in such high rmps for so long before shifting? Thats not how you ride or break in an engine really
@YOYOshart
@YOYOshart 4 жыл бұрын
I can’t wait too see the final product! Good job on the build man those old 80’s are tough to find parts for. I’ll look through some of my old cr stuff if I find anything I’ll dm you!
@siayourcannaguy6106
@siayourcannaguy6106 4 жыл бұрын
Cutting the silencer on a 2-stroke will often give a small boost in low-end, but it might take away more top-end then you gain in the bottom. There's a balance. Most folks cut about 1 1/2" off the end. You might need to re-jet slightly, and it will likely be slightly louder.
@megamindtvsydney3967
@megamindtvsydney3967 Жыл бұрын
Awesome job !
@keepflyingraceup698
@keepflyingraceup698 4 жыл бұрын
Make your on muffler baffle with a metal pipe and then drill holes into it it doesn’t have to be perfect it’s not on the outside
@patrickmongan6614
@patrickmongan6614 4 жыл бұрын
Yes another video
@paralyzedyoungman7259
@paralyzedyoungman7259 2 жыл бұрын
Awesome job brother
@MiLkShAkEsPrOd
@MiLkShAkEsPrOd 4 жыл бұрын
Come on man you surely know this bike is running bad, something needs addressing before it courses further damage, good effort though
@pyra6517
@pyra6517 4 жыл бұрын
Milkshakeprodz it’s the pipe mate jesus
@MiLkShAkEsPrOd
@MiLkShAkEsPrOd 4 жыл бұрын
@@pyra6517 if you think that's just the pipe, your just as clueless as he is 😅
@trickingtravis3933
@trickingtravis3933 4 жыл бұрын
No no it’s the pipe mate
@gotogames1748
@gotogames1748 4 жыл бұрын
Milkshakeprodz it’s literally the pipe your the clueless one. i’ve worked on bikes for 12 years. get a life😅😂
@tpghl5225
@tpghl5225 4 жыл бұрын
Tyler Grimes-Whited It's not the pipe dummy. Go find a bike and remove the silencer, it won't do shit. The silencer on a 2 stroke can change the power curve a tiny bit depending on how long or short it is. In this case the bike is running rich, which was nothing to do with the silencer not being packed. Your clearly new to 2 strokes or that 12 years is really 12 months.
@miggs2964
@miggs2964 4 жыл бұрын
Looking nice now joe keep it up
@michaeldavid9181
@michaeldavid9181 4 жыл бұрын
Great job rad bike young brother
@ranceroden5409
@ranceroden5409 4 жыл бұрын
What year did they start making crs instead of xrs
@ricerneon399
@ricerneon399 4 жыл бұрын
That seat looks horrible
@CainSample
@CainSample 4 жыл бұрын
Smart move on the seat👍
@braaaaapp2464
@braaaaapp2464 4 жыл бұрын
Fmf makes a universal pipe I had one on a 89 cr80 in 05
@CatylisticRevo62
@CatylisticRevo62 3 жыл бұрын
Anybody out there have any advice on how to stay calm and positive while working on old rusty broken machinery? I wish I could be like this guy...
@nbayoungboy5295
@nbayoungboy5295 4 жыл бұрын
The bike looks great bro
@vastak8853
@vastak8853 4 жыл бұрын
Check the main jet bro
@kyleengle3862
@kyleengle3862 3 жыл бұрын
Check out Rocky Mountain atv/mc, they can usually get oem parts. Couldn't find plastics to my KLX140 anywhere and they had them.
@finnhalewood2419
@finnhalewood2419 4 жыл бұрын
Put a rubber gromet where the hole is on the rear fender, it will look clean
@joshmx7161
@joshmx7161 4 жыл бұрын
Listening to that bike was hell.... Sounds very lean put some time into tuning brother.
@tonymassingill6032
@tonymassingill6032 3 жыл бұрын
The spark to the engine is out of time take off the flywheel and try moving the stater .
@po1ntblanknasty678
@po1ntblanknasty678 4 жыл бұрын
Turning out nice hope you get everything you need
@ranceroden5409
@ranceroden5409 4 жыл бұрын
My main dirt bike when I was 13 was a Honda 1980 xr80
@switch625.
@switch625. 3 жыл бұрын
I’m sorry but cristy strip was so funny to me for some reason🤣
@rollafatonedude
@rollafatonedude 4 жыл бұрын
1 in 5 chance Tommy Hyatt will win the bike as it stands now lol
@2vintage
@2vintage 4 жыл бұрын
Hahaha he has donated a lot!
@600bubba
@600bubba 4 жыл бұрын
Just weld a pipe that fits and drill a bunch of 6mm holes in it i had the same thing happen to my cr80 factory silencer
@colinmafera5744
@colinmafera5744 4 жыл бұрын
Brake light for the hole in the back fender looks like there was one there before
@lazarmrsic5623
@lazarmrsic5623 4 жыл бұрын
Colin Mafera no brake light on a dirtbike and its an old 2 stroke
@sandmanbub
@sandmanbub 4 жыл бұрын
Nice work.
@GavinGoche
@GavinGoche 4 жыл бұрын
Nothing against your hard work on this bike but just if the plastics were better it would look way better
@abg_b6005
@abg_b6005 4 жыл бұрын
At 22:03 it supposed to have a line that goes around the top bar. It looks cut off
@leroyadrianebernardo0113
@leroyadrianebernardo0113 4 жыл бұрын
My finally build honda cr 80
@OperatorASF
@OperatorASF 4 жыл бұрын
Bro do you even know how to jet?? That thing is SCREAMING to be jetted 😵
@kadedickinson3513
@kadedickinson3513 4 жыл бұрын
Guaranteed he just straight piped it (last owner)
@donaldmaclean1872
@donaldmaclean1872 4 жыл бұрын
Hopefully when you pick the contest winner the person who wins already has some riding experience,if not then this little beast wil be a good bike to learn on. You're gonna make someone really happy with this bike,and hopefully they take care of it and not just beat the sh*t out of it because it was free.
@melvinholcer4756
@melvinholcer4756 4 жыл бұрын
Partzilla is showing a hole for the number plate..bolts to steering stem I believe
@Tyler-xe1es
@Tyler-xe1es 4 жыл бұрын
Who TF wrapped that seat ?? Why does the bike sound so bad ?? Did you even try to clean & jet the carbs. Im begining to think your trolling with these videos.
@pyra6517
@pyra6517 4 жыл бұрын
Tyler Chauvin are you stupid ? Did you not see what the pipe looks like no packing in it and no pipe through which means it’s echoing in the muffler which makes it sound shit
@nostrem82
@nostrem82 4 жыл бұрын
Need to get yourself a little rubber mallet
@WICKEDGIXXERL
@WICKEDGIXXERL 4 жыл бұрын
I don't think I've ever seen one of your videos without snow on the ground. You must get a lot of snow where you live. Do you own a snowmobile?
@lazarmrsic5623
@lazarmrsic5623 4 жыл бұрын
So much for rebuilding it if your gonna engine brake on a fresh top end and its running so bad
@Dirtbikerider927
@Dirtbikerider927 4 жыл бұрын
Arent the people entering for the giveaway the ones paying for the parts for the bike anyway?
@2vintage
@2vintage 4 жыл бұрын
Yes they are! I want their money to go good use!
@ethangriffiths9267
@ethangriffiths9267 4 жыл бұрын
Stop giving the bike so much throttle when starting a bike should start with no throttle or just a little bit of need be that’s the reason it back fired your trying to start a bike at full throttle
@richvalentine1889
@richvalentine1889 4 жыл бұрын
Have you tried to work with any shops to help you out?
@ni_wink84
@ni_wink84 3 жыл бұрын
Would have been cool if you coulda gotten the “CR” on the side of the seat Btw your gf is gonna be pissed you did that with her credit card 🤣🤣
@TheSmokingbanana90
@TheSmokingbanana90 4 жыл бұрын
Sounds like it’s running rich
@dannyoutlaw8001
@dannyoutlaw8001 4 жыл бұрын
Oh yea very sweet bike
@richvalentine1889
@richvalentine1889 4 жыл бұрын
Someone wanted a loud bike and cut the pipe off
@Josephbustamante641
@Josephbustamante641 4 жыл бұрын
All it needs is the cover lightened up to make it smooth and a new front tire. And a plastic
@MatFlyinFoolHarris
@MatFlyinFoolHarris 4 жыл бұрын
Make a new tube, drill random holes in it, TIG it to the main pipe, wrap that rascal, done.
@jacobfirth8680
@jacobfirth8680 4 жыл бұрын
Nice video
@Nick-yv9om
@Nick-yv9om 4 жыл бұрын
Nice bike
@joshchatwin8179
@joshchatwin8179 4 жыл бұрын
Very nice bro
@gsi160
@gsi160 4 жыл бұрын
Buy some perforated tube of eBay and weld it back on. The end pipes are steel so you can weld it to the existing piece.
@johnvance1866
@johnvance1866 4 жыл бұрын
For the hole in the back fender you could put like a dune flag
@2vintage
@2vintage 4 жыл бұрын
Hahaha🤣
I Bought a 400cc 2-Stroke Dirt Bike ($100 Find)
57:33
2vintage
Рет қаралды 70 М.
How to treat Acne💉
00:31
ISSEI / いっせい
Рет қаралды 108 МЛН
REAL or FAKE? #beatbox #tiktok
01:03
BeatboxJCOP
Рет қаралды 18 МЛН
The Best Band 😅 #toshleh #viralshort
00:11
Toshleh
Рет қаралды 22 МЛН
My scorpion was taken away from me 😢
00:55
TyphoonFast 5
Рет қаралды 2,7 МЛН
XR100 CR80 motor swap
21:35
Mike festiva
Рет қаралды 83 М.
Honda CR85 Engine - Assembly
18:12
Brian D. Mobley
Рет қаралды 78 М.
1986 Honda CR80R Classic Motocross Review
13:39
The Motocross Vault
Рет қаралды 3,7 М.
$200 Barn Find Honda CR80 Dirt Bike (Rare 1980's)
37:14
2vintage
Рет қаралды 237 М.
Honda CR80 Trike Conversion
30:05
Red Beard's Garage
Рет қаралды 1,5 МЛН
Honda Cr 125 Dirt Bike NEW Parts Installed!!!
18:20
2vintage
Рет қаралды 21 М.
DESTROYED Honda Cr80 Dirt Bike Is Looking NEW!!! (IMMACULATE)
23:57
1986 CR80 first start after top end rebuild
10:19
Northern MX
Рет қаралды 8 М.
Honda CR125 Dirt Bike Sitting For Over 10 Years
40:07
2vintage
Рет қаралды 174 М.
How to treat Acne💉
00:31
ISSEI / いっせい
Рет қаралды 108 МЛН