Campagnolo Zonda C17 Rear Wheel Bearing Service

Campagnolo Zonda C17 Rear Wheel Bearing Service Guide If you find the videos helpful and would like to make a small donation to help support the channel you can do so here www.paypal.com/paypalme/freet...
Buy me a coffee
www.buymeacoffee.com/Freetocycle
Show your support via the Patreon page
/ freetocycle
Follow me on Instagram
freetocycle...
[e-mail]
Thanks for watching.

[@kilgoretrout2970]

Thanks for the video! Pay attention when you order new bearings; older Zondas (pre-2018) have bearings with 15 balls and the upgraded C-17 only have 13. I believe these are not interchangeable.

[@GrayFox-xd9ww]

Want to thank you for teaching me how to maintenance dt swiss wheels and mess with the freehub and bearings. Learned a lot of your videos very well detailed. 👍🏽

[@ericzelinskas5300]

Excellent video. Makes servicing my Campy Scirraco wheeler set a lot easier . Thank you.

[@jace75]

Excellent as always - successfully changed my bearings and installed a new freehub. The aluminium freehub had bites in it from the cassette and a ton of nasty gunk. I had to use a 2.5 mm hex to release the lockring.

[@markcanepa1207]

My Campy Record also uses a 2.5mm to remove the lockring

[@biggreenshedmf]

Tks brilliant step by step explanation

[@rafac7562]

Thanks for this!!! Very useful video!!!

[@MKmarcelo]

Thank you so much!!

[@markcanepa1207]

Very well done. Thanks

[@stephenboxall3071]

Great video. So easy to follow. Job done 👍 Thanks 😀

[@beratdemirel3933]

thank you, you are a very good teacher 🔥🔥

[@mahermoussallati791]

Great video you just made me buy one 😊

[@ivannagy6427]

Great i have just bought these wheels

[@n22pdf]

Excellent vid once again dude just use it to service my SHAMAL ULTRA,s first class buddy.. love the channel man 😊😊🚴🏻🚴🏻👍 ride on

[@jonaustinvinluan5017]

Thanks allot!

[@donaldsangster2512]

Great video, just one more thing to check at the end. Check the pawls are working prior to completing!

[@emreyesilyurt7059]

thanks, it seems too easy and I will do this regularly.

[@gibbo3783]

Great video, thank you. What sort of grease do you use?

[@Phylthya]

Hello there, I think the Campagnolo Zonda C17 wheel-set is quite an amazing upgrade option. I'd love to fit it onto my vintage hybrid bike, but the rear hub measures 135mm as opposed to the 130mm the wheel-set comes with. Do you happen to know if it's possible to adjust it, say by fitting a longer axle? The frame is Aluminium, so bending it is not an option. Thanks in advance!

[@peterlloydwarren]

great video, how can the bearings be removed on the drive side? special tool to remove the race that the cogs engage?

[@jace75]

Question - does it matter which way round the dust shields are? When I took them off one of them was round the opposite way. Coincidentally this was the side with all the muck. I reinstalled them both round the same way as this vid.

[@chrisjames1924]

Great video....but why does the center of the axle need so much grease if it's not coming into contact with anything?

[@millsshumps1968]

Can't believe these are cup and cone. Explains why they are so fast

[@DerFilmgucker]

Hambini showed maintenance on Dura Ace wheels, and those are cup and cone as well. There appears to be an advantage over industrial bearings.

[@openwheelracing88]

I am looking to change out my Rolf Echelon wheels which I think is not stiff enough in rear causing brake rub. Are these Zondas pretty stiff laterally? Is it 12 degree engagement?

[@theothervalentin]

the outer shell of the ceramic bearing came out when cleaning it. (not the bearing cage itself). you didnt take that part out. since it is not supposed to spin, should i put it back in without greasing the outside of it? or is it glued in?

[@cyclinglover3721]

Dear friend I got the bullets with the same system..can be replaced for solid bearings instead of cup and cone or when can I get de ceramic replacement... thanks

[@grasho]

Can't really see in this video, but I was wondering if this alu freehub body have the usual issue where the cassette bites into it? I can't find any info regarding that issue for the Zonda C17 Shimano free-hub body...

[@liamwhyte9001]

I have a pair of these that need the bearings replaced. Are they 5/32 in the rear and 1 1/8 in the front?

[@mustafaarslan1720]

👏👏👏

[@rjacko7478]

👍👍

[@christianbratina6283]

What about the Record Rear Hub FH7-RE2 Campy sold alone, it is slightly different

[@syamilrosnawi9956]

Can steel bearing replace tu sealed bearing ? And what size for the bearings?

[@JonDanielDanielsen]

Any tricks when the free hub body is stuck?

[@zzhunt3254]

How to service front hub?

[@wanontalay8510]

I have just bought this wheelset and discovered something odd. Right side of the front wheel has a clik-click sound for every revolution. Probably from the hub. The wheel is completely true and with even spoke tension. Turning the axle by hand shows nothing but complete smoothness. The wheel is not touching anything like the brakes and so forth. Here is what is odd: When I take off the wheel and reverse it the click-click disappears???????

[@marekm7420]

👍👌🙋‍♂️