FYI: Changing out bulbs while they still get power.... You can blow fuses that way. :P I get that it's for video demonstration purposes though.
@FTspeed5 жыл бұрын
Wouldn't recommend changing them out with the power on. But it looks really boring for video if the powers not connected.
@DickeyHepSleeve5 жыл бұрын
@@FTspeed Yeah, it's not boring when you get to watch someone burn their finger.
@Aaron-fb6mb5 жыл бұрын
Are you saying just turn the light off or disconnect the battery lmao
@TimurIskhodzhanov5 жыл бұрын
Pro tips: 1) keep the interior light switch off before the install 2) once you open the trunk, disconnect the cables going into the trunk light (from the left) 3) by the time you remove the trunk light cover, the bulb will be cool 4) when installing the interior light, you might want to bend the metal contact the bulb is held with, but be careful not to short it against anything else (sparks!)
@rkitekt165 жыл бұрын
Awesome! it would have been cool to see the reverse lights being changed as well.
@XxZytecGamingxX5 жыл бұрын
What about the puddle lights under the doors?
@ashveensharma54685 жыл бұрын
those made the biggest diff at night
@TimurIskhodzhanov5 жыл бұрын
Some say you can use the same as trunk ones
@_danieljr5 жыл бұрын
I was thinking of this yesterday. This video read my mind
@sakaryu5 жыл бұрын
Can you do a video showing how to swap stock steering wheel for the facelifted one?
@FTspeed5 жыл бұрын
Sure can!
@Girz0r5 жыл бұрын
I'm sure OLM is ok, but I went with all diode dynamics for my LEDs. Every single bulb replaced by diode dynamics. Amazing quality! (Side note, If you're getting turn signals for the front/rear from diode dynamics. Get the brightest option that they sell. The sun can wash out your LEDs, and I went went with the medium option)
@FTspeed5 жыл бұрын
Diode Dynamics is a great option, we just went with the more affordable for this video.
@bubba025 жыл бұрын
I went with diode dynamics as well for my current brz and my last brz. great quality. OLM is great too as I have them for my front fender turn signals
@HAMNNY915 жыл бұрын
I knew that was coming 😂 1:41
@YSN5 жыл бұрын
I don't know, I think I'm cool with my license plate lights being a bit dim, if you know what I mean
@kaibotski49394 жыл бұрын
The have lazer radars, night vision, 2nd hand Taliban killing gear and high speed helicopters but i would also like to increase my odds in anyway possible..
@daniyalwasti66825 жыл бұрын
Can you do a video on what upgrades/mods to do to a stock BRZ when you first get it? Best upgrades to get more power? Best upgrades regarding handling ? Thanks
@HargunSV5 жыл бұрын
Daniyal Wasti Top 5 first mods on a brz would be 1) arm rest 2) coilovers 3) uel headers (with tune) 4) wheels and tires 5) short throw For affordable, and reliable power you should do a full exhaust system with a tune including headers. But you should probably do suspension and wheels and tires before that. Next would be a flex fuel sensor so you could run E85 Then the last way to really get power is forced induction. Supercharger are typically easier to install and will compliment the style and characteristic of the engine and if you have an aftermarket header you can still use it. With relatively low boost can can keep it reliable without having to change anything engine/tranny wise. You can always get a little more power out of a supercharger but for bigger power a turbo setup would be better. They are harder to install and maintain and you would have to do a decent amount of stuff to keep the engine cool and the proper fuel ratios. There’s a lot more differences but you would have to do your own research for what you want exactly. Also get an arm rest if you daily the car. it will be the best purchase out of all your purchase
@daniyalwasti66825 жыл бұрын
@@HargunSV Thanks for the reply. Good call on the arm rest! Equal or unequal headers? Coilovers or just lower springs? I want to go down the affordable but slightly more power route.
@HargunSV5 жыл бұрын
Daniyal Wasti again it comes down to preference. A UEL header will sound deeper and have that “subie rumble” and bring more power in the lower to mid rpm’s and an EL will have a more racecar sound with more power mid to high rpm’s if you want lowering springs you can get the subaru or trd lowering springs or a more affordable option is getting the eibach lowering which is the same as the trd ones just not branded as trd.
@HargunSV5 жыл бұрын
Daniyal Wasti if you’re willing to put around $1500 into power than an aftermarket header and a tune will give you a nice bump in power but it will broaden the power band more.
@Axel-zh6hf5 жыл бұрын
Will you guys ever do a wide body install??
@shortyboy25625 жыл бұрын
What about the Reverse lights???
@fistandilus15 жыл бұрын
As someone else posted, what about upgrades to the puddle lights on the doors? I want to upgrade mine but can't seem to find anything.
@Tomshwom5 жыл бұрын
check diode dynamics
@fistandilus15 жыл бұрын
Thanks guys. I appreciate your feedback.
@ViciousAbe2 жыл бұрын
What size of rims and tires are those?
@alexgonzales80025 жыл бұрын
That new trd lip looks sick but it needs to be painted on both edges
@bharadaksa33805 жыл бұрын
Can you give a video about automatic 86 tuning like ssperformance torque converter
@claytontylergolf60815 жыл бұрын
I have one of the dome lights from y'all. It flickers all the time and doesn't come on half the time.
@shifted19785 жыл бұрын
ThatCarGuyClayton one of these?
@claytontylergolf60815 жыл бұрын
shifted1978 yeah it's the same one he put in.
@TimurIskhodzhanov5 жыл бұрын
Have you tried bending the contacts it inserts into?
@crispychickenraider21395 жыл бұрын
That splitter is fire
@chimkinnugget52215 жыл бұрын
weird how i have a 2018 86 but i don’t have that trunk cover panel
@3NOM4NOM5 жыл бұрын
Normally GT versions don't have the boot liner
@chimkinnugget52215 жыл бұрын
3NOM4NOM i have the GT that’s pretty gay
@fjaajf5 жыл бұрын
Anyone knows where I can get reverse camera and/or parking sensors for the BRZ 2018? Unfortunately, it doesn't come with the car as standard (even for the 2019!) here in GCC.
@Tomshwom5 жыл бұрын
Forgetting the door courtesy lights.
@FalxPlays3 жыл бұрын
I bought an LED pair off ebay for 10$ and free shipping. Super easy install.
@Aaron-fb6mb5 жыл бұрын
How much brighter is the trunk light guys?
@TimurIskhodzhanov5 жыл бұрын
Significantly, but not too bright. Recommend!
@RFSxBANSHEE5 жыл бұрын
Sweet so happened my license plate light yeeted earlier this week
@jcramond735 жыл бұрын
Ok that's interesting, the boot lid liner is not available here in Australia, anyone know where to get one?
@HoofHearted2DAY5 жыл бұрын
Ebay mate. Look under 'BRZ trunk'
@FTspeed5 жыл бұрын
We got you - www.ft86speedfactory.com/carpeted-trunk-liner-for-fr-s-1955.html#.XJGAnihKgkk
@HoofHearted2DAY5 жыл бұрын
Ah fuck they're all gone dude. Bartons Subaru in Brisbane had them on ebay for 150 bucks or something, I was ogling it for a few weeks. They can probably order them in.
@HoofHearted2DAY5 жыл бұрын
@@jcramond73 Ah bugger this one sold too lol www.ebay.com.au/itm/Genuine-FEO-Subaru-Inner-Trunk-Trim-Panel-Clips-2013-Subaru-BRZ-Scion-FR-S-NEW/332834606244
@HoofHearted2DAY5 жыл бұрын
@@FTspeed That's cheap as fk, how much do you charge to send to Australia?
@cra0kalo5 жыл бұрын
Thomas still waiting for that instagram link?
@adrianooliveirablog5 жыл бұрын
what is that black front bumper?
@FTspeed5 жыл бұрын
New lip we test fit and haven't taken off yet. More info on that soon
@adrianooliveirablog5 жыл бұрын
@@FTspeed looks fucking sick!
@Raven866662 жыл бұрын
I MISS YOU TOM
@dodgeviperman5 жыл бұрын
How much are the bulbs?
@FTspeed5 жыл бұрын
Round 10-20 bucks, all the links are in the description.
@m00r5c0d35 жыл бұрын
TRD Front lip???
@alexgonzales80025 жыл бұрын
Moorscode no but is actually a front lip trd style. The oem trd one is over 700$.
@JonathanMartinez-vy3gi5 жыл бұрын
Fucking bet dude I’ve been waiting to change them out lol thanks and now I can’t wait to get paid Friday 🙌🏼 also are all the products in the description? Cuz I wanna do all the ones that you just did.
@JonathanMartinez-vy3gi5 жыл бұрын
Disregard the question I just saw them just now 😅
@shifted19785 жыл бұрын
I’m gonna buy an interior light because not only did Thomas burn his finger... he didn’t edit it out lol. On a side note my 2017 86 did NOT have the upper trunk liner. What gives ? Lol
@edwincorreajr5 жыл бұрын
shifted1978 same deal man the brz guys at car meets had but us 86 and frs owners didn't have it
@mr.wiggles75355 жыл бұрын
It's what separates the men from the boys.
@dallaswells25485 жыл бұрын
Just the BRZ gets it. I've got an 86 GT, and even with the upgraded trim there's not trunk liner. Just gotta buy it separately.
@TimurIskhodzhanov5 жыл бұрын
Weight reduction, bro
@hondaracer84r65 жыл бұрын
Did you guys forget to pay the electricity bill ?
@FTspeed5 жыл бұрын
Breaker went bad, Its fixed now.
@luissheva75 жыл бұрын
Not enough sales to pay the electric bill
@austinoden31465 жыл бұрын
I'm trying to contact someone about my order can really no one talk to me this is shitty customer service
@HyroDeFlure5 жыл бұрын
wow disabling comments is very unprofessional. it means you don't take kindly to criticism good or bad.
@TommyTombstone3 жыл бұрын
And here you are commenting?
@yousifruthlees5 жыл бұрын
why would you replace the light while its on so dumb lol
@rickygurrola30875 жыл бұрын
First
@gryphon1234565 жыл бұрын
Thank you for burning your skin so we know not to when installing. :)
@FTspeed5 жыл бұрын
You're very welcome.
@gryphon1234565 жыл бұрын
Get some Saav on that finger! Maybe some aloe.
@B__L5 жыл бұрын
LED number plate lights are tragic...
@Aaron-fb6mb5 жыл бұрын
Why lol
@petersosa89255 жыл бұрын
To easy .show us something hard to install smh
@FTspeed5 жыл бұрын
What would you like to see in a 5-7 min video?
@petersosa89255 жыл бұрын
How to install some mud flaps . Because on the model Toyota 2017 don’t have the holes to put them...
@shifted19785 жыл бұрын
Shit son I’ll struggle not breaking something installing the dome light.
@chimkinnugget52215 жыл бұрын
Peter Sosa that’s not hard, you just put the oem flap on the rear and drill holes when the holes would originally go and put tabs in them