Man THESE are the guys we NEED on KZbin. Thanks brother!
@barryloftin41597 ай бұрын
Man that’s a lot of work brother and you have it down man !!! I got a old dodge ram this year for cheap but a young guy owned it and cut wires and put stereos and crap in so periodically some things just start working some things stop working and now no start. I hope I don’t have as much trouble as you did but your video did help me out a lot. Good job brother wish you were closer.lol
@techdetectivepty5035Ай бұрын
Great job... Friend. And very illustrated for us, which still learning about diagnostics and repairs. Thanks 👍
@AF1MIDSАй бұрын
I want to understand and comprehend reading electrical diagrams but my learning disability makes it difficult. I really liked this video alot and it would be cool if you can make videos teaching how to read electrical diagrams for newbies.
@SkaBob6 ай бұрын
That is exactly where I am with a 98 ram that got towed in, no pcm communications but airbag and abs were working, no CE light, no gauges... All power and grounds good at the pcm connector and still held up under load. Jumped ASD relay to force power and still nothing. Disconnected everything aftermarket including radio harness adapter. Showed 1.9V on the 5V line so assumed pcm was bad and had internal regulator failure. Got a used pcm and had vin programmed, so it had been working, but put in the truck and and nothing. Didn't know a grounded 5V line would disable the entire PCM, assumed it would overcurrent then cut off and give a code about 5V reference low. Will certainly try checking both 5V circuits for short to ground and see if the pcm wakes up.
@ismaelarvizu99219 күн бұрын
I can’t thank you enough for this video
@1freesole25 күн бұрын
Wish you were near me in Texas...I have a 2001 Dakota that had overheated, a hose busted and the engine over heated as a result while driving down the road. I tested what I knew and found the heads were warped due to over heating, so I removed the heads and had them resurfaced and put a new timing set in and still have a NO START, I get a check engine light but it says the ASD relay isn't getting proper voltage. I get no click either. it turns over and I smell gas just no start. I'm lost when it comes to electrical that's the only thing I haven't learned over the years. I can tare an engine apart and rebuild it but I lack when it comes to wiring diagnostics. I'm here trying to learn, but I haven't seen any issues similar to mine yet.
@deshawnmoon35 Жыл бұрын
Thanks for this wonderful and great video as well as educational!
@harleyd98572 ай бұрын
Jackson , MISSISSIPPI , is where I was going to grad school when my 96 ram started doing this. Jackson is the murder capitol of the U.S., so not where you need your car to break down.
@orinmangar2333 Жыл бұрын
Hayes, 1st time looking at your video, and excellent diagnostic and repairs.
@HayesMobileAutoRepair Жыл бұрын
Welcome aboard!
@darkomtobiaАй бұрын
Well, now I have some stuff to look at on my moody truck, lol. Subbed.
@randy1ization Жыл бұрын
great vid, didnt know abt that ASD relay.. also Ive had good luck with marvel mystery oil quieting the noisy lifters on my old dodge.
@tedvandell Жыл бұрын
Nice work
@ryanmurray23774 ай бұрын
Awesome thanks from Nanaimo
@jamespatrick70985 ай бұрын
Great video, man! I needed to see this soo badly...I'm not a wizard with electronics a d back tracing shorts....huge help, thank you!
@kyledellinger27552 ай бұрын
Thanks bro I've been struggling for 5 days with my dakota 3.9l and you just gave me some the cure for my issue thank you for the knowledge man really appreciate it. I'm guna stay up till I fix this bithch cause Florida days are getting rough.
@frankiebadajosa631Күн бұрын
Did you find out what's wrong with it?
@frankiebadajosa631Күн бұрын
Did you find out what's wrong with it
@luclucas135 Жыл бұрын
You are Good Sir !
@PaulCTownsendАй бұрын
Thanks for the video good job.
@2late2stop5 күн бұрын
Questions from a guy in the middle of nowhere Wyoming. I really am getting a lot out of your videos, but I need a list of tools. Make and model of that scan tool? How about that handy lime green voltage tester? 2002 Dodge Durango no start. Cranks, fuel at the fuel rail. No spark at plugs. Also, hot here. Those little pins you use.
@Genetixxxxxxxxx4 ай бұрын
Thank you
@billmadle12355 ай бұрын
I was so impressed with your video how are you diagnosed it and you had your computer and your gauges in the screen tracing the wires and telling what why are the colors aren’t cutting wires really intense it’s the word that I with use. And we have to have a lot of patience to diagnose that and trace it down fantastic job I watch the entire video with us skipping through it I have a neighbor that has a vehicle same here and had the same issue I want to try to help them out but I’m not getting into that forMaybe I’ll just see if the ASD relay is bad great video though great workmanship and great knowledge!😊
@SHAD0WZOMBIE2 ай бұрын
Thank you so much, you are the first person i could find who would actually explain the diagnosis process fully and the reasoning of your approach. This will help people like me so much who just couldn't wrap their head around the computer system because everyone explains it tidbit at a time and never clearly. Renewing my Alldata subscription and finding this problem!
@user-bt9jt9yk8h3 ай бұрын
I thank you you are the man i learn a lot with may god keep u around for a long time u are 1:52 a beast i take my hat off u my my respect
@FritzAsphalt-ry1tv8 ай бұрын
Boy I wish you was close to me I have the same problem with the same truck
@tonychandler8908 Жыл бұрын
This is Tony Chandler you are the man brother
@HayesMobileAutoRepair Жыл бұрын
😁 hey man, what’s up 👍🏽
@harleyd98572 ай бұрын
Thanks , my 1996, 5.9 ram does this about every six months, and the repair shop has to tow it, then replace the crankshaft position sensor. I’m convinced something Elese is going on for this to happen EVERY SIX MONTHS. Must be a broken wire or a shorted wire somewhere.
@MJ100k Жыл бұрын
Great job bro 👍
@HayesMobileAutoRepair Жыл бұрын
Thanks ✌
@relizondon2deep5 ай бұрын
Awesome.. i have a 2000 1500 with same issue. Did you have to program the ecm or is it just plug and play? Does it need any flashing or anything??
@scottmitchell82713 ай бұрын
What scan tool and subscription are you using to gain access to schematics and highlight them like that ???
@HUBONEN Жыл бұрын
Hope you got paid well with this one?
@user-jw6li2jx9k3 ай бұрын
I have this same problem with my 2001 Dodge ram 1500 CMP component cracked pretty bad need new one I think and a crank sensor
@timjones34234 ай бұрын
What about the replacing of the computer you said you burned up two? Was the OEM still good?
@dharlen4411 ай бұрын
You're a bad mother fer!! What do you charge for a electrical diagnosis of this nature?
@ginuwine11 Жыл бұрын
Nice video, good explanations with logical steps to troubleshoot the issues. Do you have a preference in automotive repair subscriptions (All Data, Mitchell On Demand, Chilton etc)?
@HayesMobileAutoRepair Жыл бұрын
I’ve used a lot of programs but always seem to go back to Alldata . Identifix it’s pretty cool Too
@ginuwine11 Жыл бұрын
@@HayesMobileAutoRepair I do like All Data myself, It seems easier to navigate and find what I am looking for more quickly.
@HayesMobileAutoRepair Жыл бұрын
@@ginuwine11 I agreed.
@mattrite39312 ай бұрын
I see that you have fixed it i am curious if any of the data lines are shorted to ground could it cause the same no communication issues?
@ashonpar329 күн бұрын
I have 2004 Doge Durango that I can get started by spraying starter fluid. I can give it gas and it will rev up , but not all the way pass 3 RPM. Idles great. But when I shut the truck down it will not restart.
@luisbenitez41598 күн бұрын
I facing the same problem bit it has new alt and battery I don't know if they did a short cut and wires looks good and those 2 wires the purple white and orange in at 0.06 in both I already fixed some wires the only thing i have to do is the pcm
@jobehayes84447 ай бұрын
Me too
@randy1ization Жыл бұрын
Hayes, what do u think the reason is these old dodges dont hold much value.. those little v6 engines are usually good for close to 300,000 miles.,., I think the have the A500 transmission,, do they tend to have alot of electrical problems? I know they have very squeaky suspension systems,, everyone that passes by my hose sounds like it need a 100 point lube job. ha
@HayesMobileAutoRepair Жыл бұрын
Lol. I don’t run into many electrical issues on this vehicle. Mostly I get Distributor issues, cam Crank issues.. oh and flexplate issues besides all the COmmon repairs like starters and alternators. But overall they’re pretty good vehicles
@randy1ization Жыл бұрын
I have a 98 with the v6, close to 300k on the clock, engine and tranny are worn out, hard to find a junkyard engine for these trucks that dont have well over 200k on them., getting them rebuilt is too expensive and sketchy. so im kind of stuck. talked to some engine rebuilders and they are having trouble sourcing quality parts. when the engine explodes, one company blames the other company.. lots of camshaft issue.. I think its because of poor mettalurgy. no quality control. they open boxes and find metal shavings in the camshaft holes. out of spec lobes, pit holes, ect.. they have to go to the junkyard to find a decent camshaft.. pretty sad,.,.
@user-jw6li2jx9k3 ай бұрын
@@HayesMobileAutoRepair I wish you were in Louisiana
@jimpetty2961 Жыл бұрын
✌kick back relax
@HayesMobileAutoRepair Жыл бұрын
thx
@maurobernal55073 ай бұрын
How you get to them wire diagrams I’m trying to learn wire diagrams
@Allen-nh8rn5 ай бұрын
Go over and handle the guy that made it like that!💯🙏❤️🤳
@Gozlin22 ай бұрын
I have a 2005 Dodge Ram 1500.Cranks no start. Although if i tap the gas tank with a rubber mallet it will then start. As if there is something stopping it fir the relay to kick in. My relat is fine and i can here the clucking in engine as if they are working. Any thoughts?
@Gozlin22 ай бұрын
Its not a security problem either.
@juangomez12206 ай бұрын
What kind of diagnos tool is that I need one I need the skamatic
@HayesMobileAutoRepair6 ай бұрын
The schematics come from an online service providers… Alldata or Mitchell.. there are others as well, but those are the top two I believe.. Scan Tool I have is a maximus 3.0 by Matco, but any Scan Tool can access schematic information. They just need to buy the service.
@ericdallas376523 күн бұрын
My dodge ram dies when I change gears. Once I put it in reverse it dies so I gotta put it on the jumping cable
@WhuchakaVАй бұрын
27:25 look at that wire just twisted and electrical taped lol