Super tip! It shall be done to my -97. The dream mod for me would be to replace the brake pedal with a left hand lever in the traditional scooter fashion. That way both floor boards would be flat and I would be even more comfortable on long rides. How to do it though is beyond my skill level. Fantastic channel! Greetings from Sweden...
@1tonysgarage11 ай бұрын
Thanks and thanks for watching. I really appreciate the support
@pubsub98325 ай бұрын
Thank you for this awesome trick and the instruction. Only took me about a half hour and makes my life so much easier when starting! Little tip for others, the Honda bullet connectors are a bit smaller than what I assume is a US standard of 5/32". I used two 5/32" female connectors which I squished a bit, and an extra male Honda connector I had sitting around, but I'm sure I could have squished the male 5/32" connector to work also.
@1tonysgarage5 ай бұрын
Glad I could help and thanks for watching
@malmokonungen2 ай бұрын
Thanks, Tony! Works great on my Helix!
@1tonysgarage2 ай бұрын
You r welcome and thanks for watching
@55Kryan11 ай бұрын
Your videos have helped me tremendously, Tony! I got my Helix in February of this year and was very scared to work on it at first but I finally got it up and running and have even made some modifications, thanks to your videos. Hats off to you, sir
@1tonysgarage11 ай бұрын
Thank you glad I could help thanks for watching
@blipco55 ай бұрын
Pretty dang clever Tony. I never gave it a thought. 👍
@1tonysgarage5 ай бұрын
Glad you liked it. Thanks for watching
@Geecomp3 Жыл бұрын
Hi Tony Thanks for all your insight I made up a jumper but it starts off the hand lever only Going to try the other green wire Thanks again Gerry in Michigan
@1tonysgarage Жыл бұрын
Make sure the brake light works with rear brake pedal
@deesgarage659 Жыл бұрын
Did this today. It actually starts a lot better. Starts everytime. No more jamming that brake. You’re the man.
@1tonysgarage Жыл бұрын
Glad I could help thanks for watching
@deesgarage659 Жыл бұрын
@@1tonysgarage do you happen to have a video on test voltage? I’m 12V flat while idling and it goes up with rpm to at least 13.6. I have no tach, I’m just struggling to find proper information
@1tonysgarage Жыл бұрын
@@deesgarage659 that is normal it don’t charge the battery till u get over 1500 rpm.
@deesgarage659 Жыл бұрын
@@1tonysgarage great, thank you Tony
@benjewett8067 Жыл бұрын
Did it, thanks for posting the video 👍
@1tonysgarage Жыл бұрын
Thanks for watching and you r welcome
@paulbouverette5036 ай бұрын
Thanks Tony
@1tonysgarage6 ай бұрын
Glad I could help thanks for watching
@boobaru2011 Жыл бұрын
Great video,Thank you.😊
@1tonysgarage Жыл бұрын
Your welcome
@Ratz8861 Жыл бұрын
Thx!
@dansplett83034 ай бұрын
Great video
@1tonysgarage3 ай бұрын
Thanks and thanks for watching
@KelceyNickson8 ай бұрын
Thank you!!!!!
@1tonysgarage8 ай бұрын
You r welcome glad I could help. Thanks for watching
@black_horse_lover2655 Жыл бұрын
Wonderful! Thank you!
@1tonysgarage Жыл бұрын
You r welcome hope you subscribed
@black_horse_lover2655 Жыл бұрын
@@1tonysgarage Yes, I subscribed a while ago. 😄
@1tonysgarage Жыл бұрын
@@black_horse_lover2655 thank you
@BigEpinstriping11 ай бұрын
This is how it's wired on a lot of mopeds from the factory.
@haroldwheelerjr9991 Жыл бұрын
Hi Tony, love you videos. I wanted to know if the front brake starter trick work from the CF Moto Fashion as well as the Helix. Maybe when your a little more caught with the rest of the things you need to fix. Let me know
@1tonysgarage Жыл бұрын
Yes works the same wires r a different color but it works the same
@davezimmerman8627 Жыл бұрын
Nice!!!!!!!
@bcm20003 Жыл бұрын
Good vid, how disabling kick stand... I'd like hop on and go.
@1tonysgarage Жыл бұрын
You have to in bolt it and turn the sensor and bolt it back on so it doesn’t turn on when u put it down
@kevinspahr6632 Жыл бұрын
Hey Tony, is that an aftermarket plastic gas tank? The reason I ask is I thought the OEM one was steel which can easily rust.
@1tonysgarage Жыл бұрын
That is just a cover the tank is metal
@petergunn9149 Жыл бұрын
👍😁
@kevinspahr6632 Жыл бұрын
Too bad you can't just cut a little access door where those wires are at😁