Honda V6. How to Replace Intake Manifold & Throttle Body

  Рет қаралды 74,169

Full Auto Care

Full Auto Care

Күн бұрын

Пікірлер
@BigEvil850
@BigEvil850 10 жыл бұрын
This video has taught me so much, and I'm 15 ,I now know every single thing of the great automobile,IM DEAD SERIOUS. I never knew how simple these amazing machines can be,I've been studying and thinking of how they work, customization, and racing since I was 4.man................it really feels good to know mechanic's at the age of 15.this video is great.
@dustinchmielewski1903
@dustinchmielewski1903 9 жыл бұрын
I will from now on, tell anyone tightening a bolt or nut. To "give it some juice." Awesome video btw. Thanks
@erikrod9837
@erikrod9837 9 жыл бұрын
Haha my thoughts exactly! Give it some juice!
@michaelthai1150
@michaelthai1150 9 жыл бұрын
Man! Just want to thank you for the video! Took me about 1 hour but the check engine-light cleared!!! I followed step by step!!! You're awesome!!!!!
@TheBulluti922
@TheBulluti922 10 жыл бұрын
Props to you man for making this video. I had the p1491 code on mine come up and my buddy (a mechanic) said that I had to clean the intake. I had no idea where to start with this project but thanks to you im about to go start and (hopfully) finish today. Great Work keep it up :)
@weremaininsane4392
@weremaininsane4392 7 жыл бұрын
THANK YOU SO MUCH!! I was wandering why my 99 3.0 was driving VERY roughly after a valve cover gasket change. Intake gasket MAKES SO MUCH SENSE
@ikenntube
@ikenntube 8 жыл бұрын
car fixed! did it myself. thank you!.
@Bvilaylack
@Bvilaylack 10 жыл бұрын
AWESOME JOB! VERY HELPFUL! KEEP UP THE GOOD WORK!
@msach4277
@msach4277 6 жыл бұрын
There are other channels that have to be cleaned out which lead to the EGR, these can be caked solid. There are also channels in the intake manifold to deal with. If there is heavy carbon deposits, best to use a thin brush which will not leave any fibers behind. For best cleaning the end of the manifold which he removed can be taken off ( gasket needed to put back on) there is a lot of dirty junk accessible through there. I have done about 5 of these.
@SanFranciscoRiderr
@SanFranciscoRiderr 8 жыл бұрын
great video, what orange gasket maker do you use thx
@claybenjaminjr7676
@claybenjaminjr7676 6 ай бұрын
What are the names of the hoses you took off? I have to replace the top one
@thexflexclan
@thexflexclan 6 жыл бұрын
The valve that you clean under the th that has a black thing on top ? If I clean could help with the engine stall on cold on 🛑 i replace the idle control valve but still does only does 1 time while warming up
@palpinter4204
@palpinter4204 8 жыл бұрын
Like your ratchet. Makes it fast and easy . do you know what brand/make it is?
@cassandrazamora9256
@cassandrazamora9256 5 жыл бұрын
What is the “thingy” you talk about at 8:30 seconds? I need this replacement part and do not know the name?
@chrischris666
@chrischris666 5 жыл бұрын
I think he said that is the ERG valve
@Cfass1
@Cfass1 2 жыл бұрын
I have a Latino friend and he called it a chingas
@GZAY85
@GZAY85 10 жыл бұрын
1 of my outer nut is stripped on the manifold I have same car and p0401 is why my engine light on?
@GZAY85
@GZAY85 10 жыл бұрын
Can you please help me with the stripped nut on my intake manifold????
@mclovengarcia2883
@mclovengarcia2883 7 жыл бұрын
Mayor McGheeZe bro buy the kit for bolts like that in any autozone ....
@Ihavetruth22
@Ihavetruth22 6 жыл бұрын
What sensor is that 7:02 ? God i hate all those rubber tubes and sensors. No one knows what they are. lol.
@hmongboy9161
@hmongboy9161 7 жыл бұрын
is carb cleaner spray and brake cleaner spray the same??
@Cfass1
@Cfass1 2 жыл бұрын
No
@nickalbano6509
@nickalbano6509 5 жыл бұрын
Not that it may matter,but there is a sequence to loosening/tightening the intake manifold bolts.
@cumshot247
@cumshot247 4 жыл бұрын
The mere fact that there IS a sequence to loosening/tightening the intake manifold bolts means that it DOES matter!
@Cfass1
@Cfass1 2 жыл бұрын
Not when you use some juice
@IM.B
@IM.B 8 жыл бұрын
Do the valve adjustment as well since you already on it.
@Rob-fx2dw
@Rob-fx2dw 6 жыл бұрын
Just spray and wipe the throttle body with kerosene to take off most of the crud. Then do a final spray with carb cleaner. Saves using all of the much more expensive carb cleaner. Make sure you folow the prescribed procedure for taking out and re intalling the monifold bolts which will save distorting or cracking the manifold . Start at the center bolts and work outwards gradually towards the ends undoing a bit at a time. Reverse is done the same way tightening a bit at a time an repeating until they are tightened at 16 ftlb. One at a time gradually from the centre outwards. Don't put any copper based anti seize on the surfaces. Copper reacts with aluminium by a process of electrolysis destroying the aluminium.
@rollandriehn6404
@rollandriehn6404 6 жыл бұрын
the tighten sequence diagram is all over youtube. Removal is the inverse. I.E, start with position 9.
@mclovengarcia2883
@mclovengarcia2883 7 жыл бұрын
Good video bro ....
@TheGamster-kd3th
@TheGamster-kd3th 7 жыл бұрын
Please don't use carb cleaner for throttle body's guys please use throttle body and air intake cleaner
@Ihavetruth22
@Ihavetruth22 6 жыл бұрын
Great video but you didn't show the car test.
@PokemonErnie
@PokemonErnie 9 жыл бұрын
subscribed.
@fullautocare4403
@fullautocare4403 11 жыл бұрын
I spent only $9 on Carb Cleaner. I make my own gaskets, and I charged $90.
@mrsimeon
@mrsimeon 10 жыл бұрын
Good JOB, but GET that manifold OFF the front bumper, paint, and the dirty intake pipe is on the seat Cushions. your work is good, BUT I would freak out, with the carelessness, and dropping the engine plastics... some mechanics are mechanically, good, just not neat freaks.
@rollandriehn6404
@rollandriehn6404 6 жыл бұрын
Good info. But if you make another video, get a phone tripod adapter is using the phone as camera. GEt the little knobby leg tripod. And/ or a head mount. Nobody likes the one arm bandit.
@unebonnevie
@unebonnevie 8 жыл бұрын
You pollute the road there! Get a brush and good towel and spray just enough and clean those holes out! Use a container to catch the spray residue!
@jackcole2636
@jackcole2636 Ай бұрын
Fuel injected
@cookiemonsta2806
@cookiemonsta2806 10 жыл бұрын
Just.spray! Spray! Spray!spray!
@raymondchapman5990
@raymondchapman5990 5 жыл бұрын
I think you need a little more juice.....
@brittaniemood7198
@brittaniemood7198 4 жыл бұрын
Bro get rid of that egr
How to Fix a Car that Idles Poorly (Rough Idle)
13:52
ChrisFix
Рет қаралды 4,8 МЛН
Honda Throttle Body Removal & TPS Testing
22:04
Ktec Garage
Рет қаралды 129 М.
Арыстанның айқасы, Тәуіржанның шайқасы!
25:51
QosLike / ҚосЛайк / Косылайық
Рет қаралды 700 М.
Beat Ronaldo, Win $1,000,000
22:45
MrBeast
Рет қаралды 158 МЛН
How To Clean a Throttle Body ~ The RIGHT Way
11:29
HumbleMechanic
Рет қаралды 1,9 МЛН
How An Intake Manifold Operates
6:22
OneTrickTech
Рет қаралды 24 М.
How To Install P2R Intake Spacer (J series)
9:28
Texas Honda Channel
Рет қаралды 17 М.
If You Understand Volumetric Efficiency You Understand Engines
16:45
driving 4 answers
Рет қаралды 1 МЛН
How to Replace a VTC Actuator (Complete DIY Guide)
30:57
ChrisFix
Рет қаралды 3 МЛН
J37 INTAKE MANIFOLD And throttlebody ACCORD
5:53
j series garage
Рет қаралды 43 М.
HONDA V6 MISFIRE
19:20
James Danner
Рет қаралды 73 М.
Honda Idle Air Control Valve, PCV and Throttle Body Cleaning
8:29