How Much It Cost To K Swap My RX7

I put a poll up on our Instagram page and asked what you thought it cost to K Swap my FD RX7 and the price estimates were all over the place. Rightfully so, it's a tough thing to put a value on. There's so many variables that goes into a custom build. Most of the parts on this car were created from scratch, they can't be purchased at a store. Queue the comments telling me I made a mistake K swapping my RX7:
This video had no sponsor, my wallet hurts. Buy some of our merch to help fund dumb decisions like this RX7.
We've got merch and stuff: gearsandgasoline.com
Follow us on Facebook and Instagram @gearsandgasoline
Contact us via email at: [e-mail]
Primary camera gear that we film with:
Panasonic S1h with MC1 adaptor
amzn.to/3G918cO
Panasonic S1
amzn.to/3HajZ8q
Gopro Hero 9
amzn.to/35vHU4s
Rode VidoeMicro
amzn.to/3g4YpGA
Rode mic go
amzn.to/3rVWeeb
Sandisk Extreme Pro 300mbs
amzn.to/3g6vn9H
Ronin Rs2
amzn.to/32FStAU
Canon 24-105
amzn.to/33VIKXK
Canon 70-200
amzn.to/35k3lFo
Rokinon 35mm
amzn.to/35krZpq
Rokinon 14mm
amzn.to/3Gej9GM
Sigma 35mm
amzn.to/3II1NU7

[@thirdgen7]

I'm the original owner of this FD. It makes me happy to see it loved as it should be. I'll look for the original window sticker, and if I find it, I'll send it your way. Thanks so much!

[@lynnmckenney1987]

[@nickkings2220]

So you're telling me you couldn't find another $401 to add to the final price tag to hit 69420?

[@douglasshouganai2516]

'tis a shame, really.

[@rizkybossman6053]

I thought I'm the only one who thinks that

[@mengx94]

Nice, but not enough

[@ImBarryScottCSS]

Give it time, it'll come.

[@fastnsexy]

You're a genius

[@MemerMan]

Shouldve tipped your labour guy $401 for the memes

[@DarioSpeed.]

yo u here, hola

[@joebrother7116]

I didn’t know you were a man of culture

[@thelazyyinzer5548]

I didn’t know you like cars!

[@creylacoste4981]

Hi

[@Dwaynefreeman]

Nice

[@Explorerman1293]

Me: that's too much money *burns out and bounces off the limiter* Me: Nvm

[@TheGoodMedicine]

sounds good too

[@fieldsfieldsfields]

I had to turn up the volume and re watch that part 😂😂

[@dedelabinouze5110]

Already sipping oil though, ouch

[@kio51423]

If you ever think it's too much money, then you put that money to work by spinning some rubbers....then ask yourself, "was it worth it tho?" And I assure you the answer will always be yes 😂

[@evilf23]

You guys have been killing it with your content for the past couple years. You've become my favorite KZbin car channel. VA Bois rep!

[@noahsifuentes663]

100% can agree. I’d see a video or two every now and then very rarely, but these past 2 years I’ve been really into them 👌🏼 they’ve been doing amazing

[@Indi_DevJames]

Honestly would love to run into these guys on the road or a track meet with my rx8 🏎️🏁

[@jacobgrand2811]

Every time I see they posted it feels more like an episode than a video...they're editing and everything they do is like no other channel

[@idrain9]

no objection at all. especially these last 1-2 years they have been making very engaging episodes

[@PedalMore]

I agree I don’t even own any project cars but I do love Jdm cars in general And this channel blows me away

[@WillieStephenson]

$48,000 in parts $21,000 in labor Honestly that says alot at how much you can make/recoup/get discounted when you have a KZbin channel

[@jreydelacruz]

I thought I was bad at $12k in parts and $4k in labor for a 5.4 lightning swap into my 99 expedition. Still need a tune and cosmetic stuff, expecting to spend another 4-5k. Has all supporting mods and fbo should make 400-410whp/500-520lbft. Fingers crossed..

[@Mr.Beastforpresident]

And it’s not easy

[@phudoan7983]

​@@jreydelacruz why??? could has just put down payment for 6.4 hemi durango

[@jreydelacruz]

@@phudoan7983 1. I love my Expedition 2. It's paid off 3. Makes more power 4. It's paid off 5. Cheap insurance 5. It's paid off

[@tturi2]

​@@jreydelacruz#1 was enough

[@NJGhost34]

One of the best things about this channel: Ben and Ben actually get their hands dirty and drive their builds. That is huge. So many channels outsource the work and park the cars which defeats the build purpose. Keep up the great work guys!

[@Carlos.Rivera]

Those are not car enthusiasts, they are abusing the system

[@jd3330]

I don’t think there’s anything wrong with that. You can still be a car guy even if you don’t know how to work on cars. Like what he said, paying someone is better than doing it yourself and messing up and having to rebuy parts.

[@Cyborg_Auto]

Ben just said on this FD build he outsourced most of the labor on it..

[@SturdivantRacing126]

I honestly don't know why so many people get butthurt when someone buys expert labor to reduce the cost and pain of doing things incorrectly. This whole "Built, not bought" pride thing is super silly. If everyone could do everything, then there wouldn't be a need for anyone to have jobs to do anything. (Besides, most of those folks just omit the cost of their own labor efforts. Every action costs something. ;) ) Sometimes, it's just better/smarter/easier to just buy the labor or the finished thing you need, and go straight to having fun. I like that Ben is straight up about this.

[@NJGhost34]

@@jd3330 I rather try and fail than not try at all.

[@Willy-jl1ly]

No one gonna talk about how dope and bad ass it was to floor it at the end of the calculations?

[@CaptainBlitz]

I thought exactly the same

[@TrVlogs82]

I just wish the clip was longer loool.

[@HGChannel2020]

kinda sounds like a rotary too

[@rudymwaurah]

:So what are your hobbies? Ben: Well, erm... You wouldn't understand.

[@skyty0]

"I modify cars."

[@nisse7292]

I throw money in the sea

[@Rose.Of.Hizaki]

I "Bbrrrrrrrrrrp..... Brrrrrrrrrrrrp..pkpkpkpk...brrrrrp"

[@JezPeRR]

Car guys understand.

[@ticon7808]

The tittle should be "how much it's cost to rebuild a Fd rx7 with K swap"

[@davidyang577]

16k for the FD to already come with the k swap and most of the bolt on was a bargain to begin with too I think.

[@tanmay______]

Wow I wasn't ready for that eargasm at the end

[@agenericaccount3935]

Great thing about big project car gigs is that you can amortize the cost over time as budget allows. No shame in that. It's a pay as you go adventure.

[@bagfumbler]

The hardest part about paying as you go is you're spending all this money on parts you're collecting up for when you do something like a swap and you just want to drive the swap, patience is key but boy is it hard lol!

[@marquisethomas5611]

The k swap didnt cost you the most money literally everything else did 😂

[@baygon2993]

and the car it self

[@iyanmanzano]

I'll would pay to see someone have their crotch kswapped.

[@marquisethomas5611]

@Ida hoe lets say he got the shell for 9k(thats not included) & he went to a jdm engine depot & picked up a $800 motor, another $1200 for a swap kit(mounts etc), & another 1000 for a custom harness, another 900 for the ecu , i dont think he wouldve got charged 11k for labor because its a fresh start(he got charged to chase down problems & fix/figure out whatever the other guy who swapped it did, all in all im guessing with him already having the shell & the parts i named he wouldve paid 12k all together to get it running & driving, no cosmetic things

[@marczamo2500]

@@marquisethomas5611 that's very optimistic number. Reality is to get driving and running reliably is minimum $15k and that's with a crappy roller. Solid Good condition fd rollers with full interior including buttons and plastics (those are always missing and/or broken) are running $15k+ easily these days. FDs are shooting up in price and interior pieces are hard to find and very expensive. If you do all the labor yourself with a good clean solid roller, you can do the swap for probably $30k. Remember his roller was not the best...needed body work and a good wrap job is not cheap.

[@marquisethomas5611]

@@marczamo2500 i wasn't including the price of the chassis, i got the 9k number because ben paid 16k with the engine/turbo, trans setup already in it, subtract the engine i think he could've got that shell for 9-10k tops

[@ChrisWalksFast]

I hate how money and cost is kept such a mystery in a so many different avenues of life. If I watch a detail vid or track day video, would love to know the cost to see if I would like to get into it. This is so great you guys do videos like this, thank you!

[@AdamChandler86]

I never understood why anyone should shy away from / hide from / disguise / ignore discussions about cost. Ben, you don't need to beat around the bush. If people throw out negative replies, they're probably just jealous. Successful people have nice things. It's okay.

[@bouros83]

thank you for mentioning what you actually paid for it along with what the MSRP cost would be. Many people don't mention what came out of their pockets like its a top secret thing (i hate it when that happens)

[@youtubecomments5951]

This isn’t the cost to kswap. It’s to kswap a car already with a kswap

[@youtubecomments5951]

On top of that it cost him 60k or something like that. Good job showing how expensive it is to use autozone.

[@nottobay6768]

Imagine how much more it would have cost without the custom subframe it came with.

[@Chocolate_dragon]

I thought the same

[@justswippin2693]

exactly!, I'm confused on why labor was 20k+

[@Firion13]

I have decently low mileage Z32. I'm dead set on a swap. After watching your K swap series I was almost convinced to do the K swap. After a lot more research and spreadsheets to do comparison swaps I decided to do a 2JZ swap. Yep. Smoother operation. Huge power potential. Cheaper. Yes it's actually cheaper. I started with a GE engine. Even after all the machine work, swap parts, conversion harness, ECU, turbo, ect... Still cheaper. The k Swap parts are EXPENSIVE. So much so that the $500 engine price makes little difference between the two. Still... I really enjoyed your K swap content.

[@nicolejhondelacruz9339]

Not skipping ads for continous quality content. Some youtubers keep their earning to themselves but you guys are giving it back to us through your vids. Thanks.

[@rocksteady8986]

the thing that is frustrating about these types of "I swapped it to be more reliable" videos is if you spent 20-30k on a rotary build or hell, even a billet housing build, you'd be just as reliable. it's the lack of maintenance that kills these cars not normal wear.

[@wespuerta]

The frustrating part is most of these types never give a rotary a chance. Never owned one, never maintained one, but keep saying it’s unreliable

[@quademasters249]

Just to be clear, these guys didn't kwap anything. They bought an FD already K swapped then spent $70K making it look nice.

[@robertabila]

A cup of coffee and some gears and gasoline. Great way to start the morning! Keep up the good work guys!

[@colecampagna6302]

Mmmmm coffee

[@Affalterbach1967]

2:06 You bought a car that was already K-swapped ? I've missed the plot.

[@KingTroopa]

It was somebodies attempted kswap that was almost there but not really with a lot of issues and stuff done poorly.

[@hamzasyed9144]

FDs look cool af. That’s enough of a reason to spend 46k in my books

[@spencerhudzenko3734]

Thank you for making this video. It's easy to watch these builds and get discouraged with my own projects and their cost. I've absolutely loved everything you guys have put out over the years.

[@Rookheimer]

There’s always that slight pain when seeing a Rx7 without a rotary, it may be better without it, but the rotary is the heart of the Rx7

[@Linkedchief]

Okay, I'm confused about this whole "K swap is light than a Rotary thing" because block for block, doesn't the rotary only weigh about 250lbs while the K24 swap is like 420lbs? I know the 13B with all the accessories and turbos is about 400lbs but then the K series with a turbo and all it's accessories would be significantly more as well, right?

[@davidreid9973]

And a 13b can also make way more power. This was a dumb swap.

[@tiagobelo4965]

@@davidreid9973 with how built either one needs to be for seriously big power figures, I'd consider them equivalent

[@dohc1974]

@@tiagobelo4965 not sure what you mean by “built” kseries internals are perfectly fine up to 500whp reliably

[@Linkedchief]

@@davidreid9973 Nah they make pretty similar power levels at the very top end of mods with all forged interiors, sleeved cylinders, ported rotors etc.

[@Zrakow]

@@tiagobelo4965 stock 13b's can take 550whp and 500nm of torque stock before blowing

[@nulltan]

Kinda expensive now but in the long term (and i mean like 10 years down the road) reliability, maintenance and repair costs are gonna make this build worth it. A lot of people in the comments keep talking about power but in all seriousness is it really worth it to have a super beast thats scary to drive and gives you anxiety about one of its parts failing versus a "no worries" daily driver that you could fix in no time and for really cheap. I personnally love this build and wish i had the time, place and money to do a project like this. Great on them for making it happen!

[@heygrego]

Next you should make a video called "How to K-Swap an RX-7". Step 1: Buy an RX-7 with a K motor swapped into it.

[@ghost21501]

Best tuning channel in KZbin. Plus having a video drop every Saturday morning is perfect. Slow Saturday mornings, sipping coffee and watching G&G. What could be better?

[@gymz4065]

Dam worth every penny IMO! Hobbies are never cheap….. it’s like having a wife! 😂

[@AliasHSW]

You have a wife as a hobby???

[@gregorygregory6347]

Yeah but hobbies and beer don't talk back!

[@ayske1]

My wife is not expensive? 🤔

[@christopherjohnston6343]

@@ayske1 maybe your wife isnt a "hobby" lol

[@Whateva67]

Nice forged wheels. I’ve been a Honda guy for 25 years now and I’ve always loved these RX7s so I really like the build.Been watching you guys now ever since you drove to Alaska a couple years ago,greetings from British Columbia 🇨🇦

[@psewgobind]

For under $20K US, you could get a 2017 k20C2 6MT Civic Sedan (Canadian version which is well tuned from the factory), cat-less down pipe, RPF1 rims, Tien Springs, replace the shocks and bushings if too old, ditch all the weight meant for cargo (including underside cladding), spend on the RPF1 rims with some cheap Taiwanee tires (SA-57), replace brakes for stuff that can do duel-duty, k-Tune it to lower the Vtec activation. It's a simple build, but with surprising results.

[@SilverScarletSpider]

I love this. Maybe a Honda RX7 is a better buy than a stock C8 Corvette after all

[@MrBlazeDemingo]

Intro Song? that introduction was a jaw-dropping first impression!

[@IDK4970]

if you find it let me know ! been trying to shazam this with no luck

[@vallenvega]

same! I also want to know the intro song.

[@MrBlazeDemingo]

MJ cook - lightbeams

[@MrBlazeDemingo]

​@@IDK4970finally got it

[@MrBlazeDemingo]

​@@vallenvegafinally got it

[@FrostWolf05]

Glad they added that last bit. Modifying cars is expensive but there are ways to have less come out of your own pockets. Love the vids.

[@williambarrineau7153]

The sponge-bob music at the end. Icing on the cake. I’m restoring a 1992 Toyota GT-S and putting in a 2GRFE. I feel the excitement and the pain at the same time.

[@sieve5]

Man that's an eye-watering bill. Holy crap.

[@mayuravirus6134]

No no its not eye-watering bill anymore it makes you bleed everywhere

[@michaelfortier7726]

The only thing I dislike is the sound. You could add a properly placed resonator to kill the exhaust rasp in between shifts, and it would sound more refined. A different muffler could also produce a deeper growl.

[@jenibond]

Really impressed how honest your answer was !!!! We all know that you tubers get so me free stuff but most will never tell you how much it saved them !!!!

[@standupp4755]

that's a boat load of cash, if I ever do a project car its gonna be on the cheap end for sure

[@geico_drip9878]

You only have so much time to live tho. I say go full send

[@zokusharuuku1091]

I’ve spent about $50k total on my sti so far, rebuilt for 900whp and on a low boost 25psi tune to keep things reliable it made 510whp and spun a bearing after about 6000 miles. So here’s to another $10k to get it fixed and hopefully then I’ll get it repainted. Might be a couple years before it’s running again but I should be at about the same cost as yours just about when I’m happy with it. Thinking I’ll shoot for a f-it 700whp build this time though, I’ve got other cars for reliability like my k series accord or restored triumph spitfire-surprisingly reliable and cheap to repair.

[@arphmd]

"Damn, I can get a used Type-R with that" - Better-buy guy, 2021

[@mayuravirus6134]

With that kind of money you have left overs you can do so much thing with over 30k left

[@uptownsamcv]

AWESOME!! FD RX7 is one of the sexiest Japanese cars ever built and deserves a reliable capable drivetrain....

[@NahBra_EUC]

This vid put a big smile on my face, especially the launch at the end. Thanks for sharing your beautiful build details with us!!

[@blytzace]

Honesty doesn’t even seem that bad for everything you did to it. Better than i expected

[@dee1089]

TY for a REALISTIC cost on a project car! tons of people think its like 10k for a car... lolz.

[@Htm]

as usual, liked before even watching.

[@fajareka8721]

The sound of it just 👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻

[@safouder]

Man, this is what being a car guy at its core looks like. Loving your car, building it to the best shape that fits your style and likings, and especially sharing the info with other enthusiasts into the purest and most honest way. RESPECT

[@toysforboysrc]

It would suck if you went through all the effort of the build and also filming and editing for 3 years and with you upload the video, it only gets 120 views 6 likes and 4 comments. I say this bcs it’s hard to find natural DIY at its best when there’s so much competition out there and it’s not all fair. There’s no telling if something will be successful or not.

[@safouder]

@@toysforboysrc Agreed. I know it's not for everyone, and I'm pretty most of us thought about doing it at some point (shooting videos with friends and sharing car culture online) but let's be honest, It's not going to work out the same for everybody, and I guess I'm okay with it, that's life after all.

[@LittleMikeStarCraft]

It's such a beautiful car; I wonder how much the KZbin channel helped recoup the cost. This video should help, because I have a feeling it will eventually get millions of views.

[@NayrMcDubs]

Ben: "so I spent 16k on the shell" Me: Welp, I can't do this now Edit: 69k for a k-swap "Nice"

[@strmshadow8411]

You can just don't overpay for a shell like he did.

[@strmshadow8411]

@@maiy8786 No, at 2:05 he says he paid 16k for the rolling shell, so add 5k for interior and 3.5k for the wrap and pop up covers. Bro, that's even worse than I thought. He basically paid 24.5k for a non running project, he could've bought a clean running FD for that price and sold all of the rotary stuff. He just absolutely overpaid. All that matters is that he's happy at the end though.

[@strmshadow8411]

@@maiy8786 My bad read that wrong. I think if he would've just started with a fresh shell it probably would've cost at least 20-30k less than he spent. Looks like he made that mistake of taking over someone else's project but didn't low ball them for it.

[@strmshadow8411]

@@maiy8786 definitely, they're called money pits for a reason lol.

[@mayuravirus6134]

@@maiy8786 You see 16k for a rolling shell of RX7 is cheap because its shooting up in price even worse if you have low mileage FC this is FD

[@KevMk3]

It is a hell of a lot but like most builds you just pay for what you want to do, modifying is dead money unless your keeping it. Hats off it is a great car

[@fxjh21]

I remember when you guys were at like 100k or even below that. Can't wait for you guys to reach 1 mil.

[@nobodyshero200]

Thanks for sharing the costs. Probably making a lot of people feel better about the cost of their project car. Or making people think twice before starting.

[@LucoreAuto]

Hmmmm totally feel like we need to do a comparison video with the LS FD RX-7 we just finished this fall. Would be very very interesting to see the cost breakdown and performance.

[@castro.k24]

F1 weekend and an upload from you guys?! The only reason why i dont sleep in on Saturdays 😂

[@mannye]

This is the kind of true to life video I love to watch. Sucks when someone sees build videos, gets excited and drops money on a project car only to find out that the true cost is exponentially higher than what they planned to spend. This results in an unfinished hulk sitting under a tarp and slowly rusting away.

[@weswest8666]

Cheap radio, nice floor mats , love it!

[@luffararnesugerkuk]

As much as I love the Honda K, it is not for everything, 20B all day in a FD and for that money you get a lot of rotary sauce my friend. Not to mention newly built rotary can be made a lot more sturdy and trusted than any stock 13B from factory, again for good as the K can sound it does not beat a highly tuned rotary in that department either imho. From wrap, wrap, wrap to an explosion that send off to a 9k+ primal scream other set ups just cannot reproduce.

[@nickkings2220]

is the car still technically front mid engined?

[@smallpebbleboy12]

I was just rewatching the first k swap video, perfect timing

[@gbessone]

This car is totally damn gorgeous, and i love the color.

[@MykolaNechyporuk]

Honestly i don't believe that n/a honda k series engine with turbo and 400 whp will be more reliable than original rotary engine... I bought my mazda RX8 from Copart auction...I got lucky and compression of my rotor is OK for now. But i checked the prices and brand new complete engine for my RX8 will cost less than swapping it to a different engine...And i actually bought it because i wanted to try rotary engine! And so far i really love the feel of rotary car. Sometimes i have a feeling like I'm riding a four wheel sport bike))The best way i can describe it))

[@Rmx2011]

Yeah, I kinda thought it would be expensive. But as a hobby it doesn't really matter.

[@zTheBigFishz]

Start with a less complex car. I had a Fiat X1/9 K swapped with upgrades to the suspension, brakes, new wheels, tires, and a few other things for roughly 38K total including labor, the included cost of the car is 3K. Still expensive though...any resto modded car is gonna be pricey.

[@bradsucks9872]

A mint rotary fd cost around 60+ thousand dollar here in malaysia sometimes 70k

[@rcaddict7638]

Gears and gasoline really helps me get up for my early morning Saturday games

[@StorKejsaren]

That RX7 is a beauty, even though it doesn't make any sense, I still think I'd have it over a similarly priced C8 Corvette despite the vette being a much faster and much more reliable car 😅

[@curveofsound]

This is a better example of how much builds actually cost and why so few people ever finish them...

[@j2d375]

Gears and Gasoline is like Saturday Church

[@niikon]

I had no idea you used an S2k transmission. Damn, this must actually be my dream car just there. Always loved the shape of the RX7 but hated the rotary reliability. Going all HONDA where it matters is the best choice ever. Hope you get to keep it forever man! 🤘

[@ChuckNB2]

Great video :D passion doesn't have price ! love the music at the end :D

[@stilldynamix2506]

I remember subscribing back when you guys were at 50k miles I've loved all the content so far

[@LV_daWEED]

Wrapped my car the same color, love it 🤘🏼

[@ethangraham6035]

love all the recent videos bois keep doing the good work 👍🏻

[@ricardobobby7]

GOOD FOR YOU MY MAN! Enjoy the car xx

[@ruru2500]

glad you finally included labor... it isn't cheap

[@strongb05]

Would really like to see how the gross weight, and weight distribution of this build compares to a stock FD. For an added bonus compared to a well done LS swap. Not trying to start anything, just curious.

[@shinzoOoO]

Saying it's expensive feels like an understatement. I'm sure it's well worth the enjoyment tho! I love it

[@MrAudi220]

I really thought Ben was going to say '' I heald off on this video because i got married''😅thats usually the reason why we car guys know what our cars have cost us, singles like me don't have that, we just know it's alot😊honoustly i don't want to know😂But thats what we live for right.The passion.Loved the video guys, keep up the good work.👍✌️👉

[@gqfilipino95]

Cannot go wrong with Honda K24 K20 reliability.

[@epark5687]

Thanks goes to all the viewers so we can watch awesome videos from G&G👍🏻

[@jebusxxl]

I feel like I have to watch the full ads, watching that 'cost so far' increase

[@lovemiabeangaming2926]

I'll take your car over any new car on the market today for the same price. Nice build!

[@kIoudie]

I give up car hobbies but it is fun to watch haha... well I do some simracing.

[@865Backroads]

Please make an updated video of how much money you have put into the civic

[@Opmdiva]

KEEP BEING BLESSED

[@TheDalitis8]

This car is BEAUTIFUL!

[@pabauza]

$16k for a rolling shell just souds awful. I understand there was a lot in it when purchased, but its clear from the start, this is not a budget endeavour. Very nice fd though.

[@blue_lancer_es]

Cost wise is erradic and not the same for everyone. As you could see he alone has discrepancy on prices. Not everyone will do a wrap pay andy ect. Not everyone will use the same ecu. Bottonline have a bigger budget than what you might think you'll spend.

[@christopherdaniel6142]

ok....a rolling shell rx is expensive af.. in the end its worth it and im sure you didnt need some of those high-end parts . This a build you dont count the money taken to get your dream and some of us will try parts out , 15''vs 17 we may not like the 17 and go back to 15s then try a short ram intake then a cold air an back to stock box and the testing goes on. I believe in when you buy a car it should be a car you love and not whats the coolest or fastest and to have an rx7 you can ramp on ? is a dream some of us will never see happen ( lol ask the guy that started the swap ) side note ...dont sell that car man dont ever sell it

[@shmeegie32]

Volvo c30 power steering? Now thats pretty cool

[@jerseydudemafia]

Now imagine working a 9-5 and paying that much plus doing the labor yourself. Yeah.. one can only dream.

[@jakobmorrison]

Love your videos! Keep it up guys!

[@midnighthoon788]

I love that body kit. it is the perfect one for the RX-7.

[@narrowistheway77]

Honestly, this makes me want one now, I just don’t wanna deal with a rotary, always loved the FD though hahaha

[@troyfankell6581]

You did a really nice job but I guess my video would have been how to un-bastardize an FD Touring by reinstalling a 13B-REW but I don't have a yt channel.

[@guglegugle8075]

Mam rx7 fd 2jz. Koszty które zakładałem a te które wyszły są x5. Tak, nie x2 ale x5. Jeśli ktoś potrzebuje szybkiego auta najgłupszą sprawą jest tuningowanie starego łupa. Taniej wyjdzie zakup współczesnego 5 letniego samochodu który objedzie starego łupa na każdym polu...