How To Install Racing Pedals In Your Car

[@ByronReyesFCBarca]

Exactly what I needed to see, thank you.

[@ByronReyesFCBarca]

@Terrance Francisco fake news

[@leonyeh]

That mod will add 20hp at least

[@pankajmistry4600]

Looking good. Nice vehicle upgrade. Thanks for the useful tips 🤛🏽

[@bdub6942]

Excellent video, thank you for putting it out, I'm waiting for my set to arrive and know exactly what to do with your help!

[@dial2fast]

Glad to be able to help. Cheers!

[@Handlethispromptly]

Why didn't you remove the rubber/plastic coverings on the pedals?

[@BlackIcee808]

I just I stalled mines today love it

[@manufacturingdefect1287]

Love the new look

[@JZT-JZT]

•I noticed that you didn’t have to use all of the screws (top 2 of the deadpan, far left of brake and top left of accelerator) when you installing everything. •However, all of the screws appeared to be filled in at the end. •Did you just grind off the back of the screw and epoxy it on or •Did you screw it through the rubber? •Yours turned out looking real nice 👍. •I just wanted to make sure that I knew exactly what I was getting into before pulling the trigger. Thanx

[@dial2fast]

The screws do need to go through the factory pedal to be mounted and the aftermarket pedal is much larger so some screw holes don't lineup over the factory pedal. So you are correct, I did not put all the screws through the factory pedal. To complete the look, I simple threaded the remaining unused screws into the aftermarket pedal and through the rubber padding underneath. If course your vehicle will differ depending on the shape of the factory pedal.

[@lananodinmckofficialyoutub1482]

what kind of drill bit is that? I was drilling forever and couldn't get through the pedal on my Toyota van

[@dial2fast]

High speed steel (HSS) drill bit. Also spray some lubricant like WD40 on the drill bit and that will help cut into the steel (make sure your drill bit is in good condition).

[@UziGR6642]

does pedal get slippery if have wet shoes.

[@dial2fast]

The rubber knobs help with grip. But eventually after many years of use, the rubber will wear down, and at that point it can be a bit slippery.

[@UziGR6642]

@@dial2fast ok, put edges of it no grip, foot can slip

[@unwrapthrills]

What size drill bit did you use to drill the holes

[@dial2fast]

The drill bit used for drilling is 9/64" size

[@Ron-h4l]

Will this work for all Nissans, I have Nissan Murano will it work for that?

[@dial2fast]

I checked the one that I provided the link to from Amazon and the gas pedal has same drill hole pattern so it will fit 3 of the 4 screws. The brake pedal have a different hole pattern than what I got but again looks to be able to fit 3 of the 4 screws. The e-brake and dead pedal will have no problem fitting. You may want to take a look at your gas pedal and also pull back the rubber cover on your brake pedal to see how it is.

[@Ron-h4l]

dial2fast okey thanks

[@tylersierra8948]

Get the fuck out of here. You have a Murano, it's not a racecar you idiot. You are the exact reason sport pedals are no longer nice on sports cars. You are definitely the same guy that would buy his wife a minivan and install a spoiler on it ... oh yeah and don't forget the hood scoop.

[@user-oq3lv6lv7x]

Tyler Sierra are you okay lol

[@SinisterRubberDuckie]

@@tylersierra8948 no, you think they aren't nice on a race car. Your opinion means nothing in the grand scheme of things & you are the one who clicked on the video.

[@edgararcega3046]

Looking good. Keep up them mods on that Pathfinder.

[@omegafury1987o]

Or you could put a piece of flex seal tape on them and let it sit for 24 hrs.

[@TacoMonster4eva]

How do we get the mismo ones?

[@tripodinc.5644]

What size of drill bit did you use?

[@dial2fast]

I don't remember but just use a drill bit size slightly bigger than the screw diameter since you need the screw to pass through it.

[@guerratiburon]

Been drilling at can’t seem to get it on

[@SOCOM637]

Found it 👍

[@theunknownandunsolved6963]

Must have for all Honda drivers! Got to have pedals for you're tin can sounding super shit race cars.

[@Booboosik]

Now when soles are wet, will make pedals more slippery.

[@aurvaroy6670]

The rubber inserts prevents that from happening

[@arileffendi89]

Booboosik : Did you see the black dot ? That’s a rubber !

[@Booboosik]

@@arileffendi89 Not enough surface area. This is where a design choice to show off more metal makes the use dangerous.

[@arileffendi89]

Booboosik : No ! This pedal is quite good .. I’ve bought this pedal, but not install yet ..

[@OctPSfever]

I only like footrest part. The others not sure if needed...

[@Gmanautonut]

Probably 1-2 hour job

[@na8166]

Real man use 4 paddle

[@believe88]

drill then nvm. Not worth to do

[@woollysoxx]

i would have kept the pedals as they were designed.

[@brianwilson9073]

I can tell by your profile pic that you would have kept the pedals as they were designed.

[@ballinonem4life583]

@@brianwilson9073 BRUH😭😭😭

[@shakeybeatz]

@@brianwilson9073 🤣