How to program your Garage Door keypad clicker opener! - Chamberlain Klik2U

[@jackdelehey]

This video right here is amazing. Everything I needed. Way better than a manual. Thanks Danny!

[@DannyPops]

Thanks for the comment jack! I too was sick of bad videos and manuals explaining this.

[@leeclutter3296]

Yes, my thoughts exactly. Thanks Danny. The Clicker is working again.

[@paulettesharkey4881]

Thank you, Danny! My husband and I had been messing around for hours trying to figure out what garage door opener TYPE we have (the manual didn't tell us). Then we found your video, used the chart to find what we needed, and programmed our clicker in minutes.

[@3DJubilee]

Thank you for sharing this. The only clear explanation I could find anywhere! Has it working in a couple of minutes

[@johnschadegg152]

This is the best video out there for this because he displays the different garage door opener I'd codes. I couldn't find those anywhere. Thank you very much!

[@DannyPops]

It was born out of having to figure this all out too

[@You0nlyLiveonce]

You're a life saver!!! The model list was exactly what i needed! Thank you!

[@sepinac]

Excellent and very simple instructions! Worked right away. Thank you!

[@wkkoch389]

Fantastic video, you kept it short and sweet. More helpful than the manual.

[@alecgoenner]

This is the most helpful video on this. Your the only one who posted the codes and manual for the garage door opener.

[@ferozkarjikar4829]

Everything you need to know, crucial part was to find the type of garage door and its ID - Manual link helped. Thanks Danny!

[@anthonysparaccio5057]

Thank you so much for this video, after reading manuals and watching different KZbin videos, yours was the onky one that actually helped me. All the ither videos were saying the same thing over and over.

[@Sonshineglory]

Thanks for adding the code sheet. Very helpful.

[@AbeySamuel1]

Thanks ❤

[@candicelefebvre6855]

Where are you seeing the code sheet? I must be missing it

[@dih706]

Worked where other instructions online and videos did not!!! Thank You Danny :))

[@chutheproducer]

I’ve been trying to find this information for months. Thanks so much! Not sure why it’s so complicated and under lock and key. Thank you so much

[@alexanderwimbly801]

Thank You @Danny Pop! Straight to the point this is exactly what I needed.

[@Mr5150guy]

Thank you very much! Somehow mine had become deprogrammed. The garage door unit still remembered it as a remote, but somehow the pin did not work until I re-programmed as you instructed. Thank you again.

[@guhanswaminathan3422]

Awesome explanation! It was so easy I found my code from the quick screen grab you showed of manual

[@vanwahlgren8451]

Thank you Danny especially for putting in the garage door type.

[@brandonrichey4195]

Thank you for taking the time to post this, I super appreciate it. Those cheap-ass Clicker keypads couldn't be less intuitive to program. FWIW, I had to wait for the lights to go out before proceeding into the final stage of opening & closing the door with the keypad. Anyways, thank you again!

[@Josh-xc6qh]

Wow thank you!!! Also if anyone was confused at the end by the 0, just know that the 0 will always be your enter. At least for linear brands.

[@JUJU-yg1xi]

For anyone wondering why the door starts closing after only pressing one button, I believe this is to make it quicker to close your door on the way out, let the door fully close and it should now work with the entire code when you go to open it, as long as you did everything correctly

[@laskajimsen3495]

THANK YOU!!!!!

[@michaelvidmar2042]

Thank you! The key was showing the list of garage door openers. Excellent instructions.

[@joeschengrund6886]

Finally, a tutorial by a guy from this era.

[@DannyPops]

Lol thats how I felt looking for videos on this too originally

[@larrywalden626]

It worked for me just fine. Thank you. I have a overhead garage door opener. Specifically model 2026. I had trouble trying to find the right ID for it. It's number 6 for those that have trouble finding it.

[@neilmurphy4178]

Thank you . . . Simple and exact. Done programming 2 openers and one keypad in 5 minutes.

[@christinahurlbutmontoya15]

How did you program 2 doors with one keypad? I’m at a loss!

[@Lmnop168]

Works perfectly, identifying the garage ID is most crucial. Thank you!

[@str8fromtheword850]

Thanks!! Works as explained! Saves me money on buying a clicker in Car for now lol

[@arok2606]

Wow thank you for actually providing the code numbers, nobody else did that in their video

[@stevedowns5049]

Thank you. You are the only one that helped me with garage opener code.

[@DannyPops]

You are welcome! All the videos I saw were confusing so I made this one.

[@Offensive-Patti]

I can see that you get this comment a lot on this video. You saved me a boat load of frustration and I appreciate you creating this video you were the top result when I googled it! Extra credit for showing the manual page with which garage door opener ID code to use!!!

[@DannyPops]

Oh man, I'm glad its getting to the people that need it! I too was extremely frustrated with the terrible explanation videos that don't show the keys. Thanks for the comment :)

[@veneitaknight]

Thanks a bunch 🎉🎉 I couldn't remember the zero as I was having trouble getting into my front door. Thanks for creating this video Blessings to U

[@DrZzen]

Great idea to show the garage opener ID number in your video. Exactly what I was missing. Thank you.

[@Ryan-zm2nr]

whats the id good for?

[@liftacar]

Great guide and I followed it to a T however when I set my code (ex: 1234) then when I go to type it in the garage opens after i just hit the 1. I've reset it about a hundred times now and can't figure why this is happening. Any idea how I can fix this? I have a Genie Pro Screw Drive garage

[@mrknumbskull]

I just did mine. After following the directions I went to key in the code to test it and it closed after hitting the first number. I then entered the code like normal and it worked. Don't know why.

[@kylevance3043]

⁠@@mrknumbskullafter resetting, do you need to hit # or anything after your new password to open/close? I just test mine, got it to close (it also closed after the first number), but now I can’t get it back up with my new password…?

[@martinmillette8458]

@@mrknumbskullmine has done the same thing. I do not know why

[@JP72867]

This was a HUGE help. Thanks so much, Danny!!

[@paulcollins7385]

Thanks Danny! My KLIK2U is back working again thanks to you,

[@lvsurfcat8584]

I've got the same setup older opener also red botton, good that you have an i.d chart for the rest that have a different opener, thank you !!

[@BattleBornGunBrokers]

Great video! I never would have figured that dumb thing out without this video! Thanks, Danny!

[@stjabnful]

Thanks so much! We didn’t know our brand- kinda. So after a process of elimination on 4 tries- yeah we got it!😅

[@kenarnold8822]

easy peasy....thanks for the quick help. Took 30 seconds!

[@2wayty]

Thank you Danny! This video is on point. Super easy to program my garage door now. Thanks again.

[@jimmywilliams5226]

I programmed my overhead door keypad in real time watching this video. Excellent!

[@UpGreyeDD]

Thank you very much! Worked perfectly.

[@genehenning8144]

Thank you very much I was getting frustrated, Now it works!

[@busternsam]

FINALLY…. Thanks for flashing up the garage door opener type. You’re right these are stupid.

[@ericl29]

Fantastic video. Thank you. It was easy to follow and worked the 1st time for me!

[@ChrisLGraham]

Your chart was the key, we have a new house with a yellow button, so type 8 for the win. Thanks

[@1chileone]

Thanks Danny! Worked on the first try! 👍🏻

[@marionbenson1]

Thank you. Glad I found your tutorial - it saved my sanity.

[@F.a.i.t.h.speaks]

Omg, this worked!!! It took me two tries but I got it. Thanks soooo much!

[@claudiac577]

Thanks and I like that you are channelling Ferris Bueller at the end. Hehehe. Oh and I see you are in New Mexico! Awesome I lived in SF for 7 years

[@amistrat1]

Thank you for this video and especially the color codes which were very helpful.

[@jlBoucher]

The keypad with no enter key is absurd but this video was just what i needed. Thank you very much!!!!!

[@michaelbrame4933]

I looked at serval videos you had complete and basic instructions. Thank you.!

[@rashellecirigliano5467]

Awesome information so kind of you to take the time to educate us on this confusing item

[@waynebell3452]

Great videol but I have a question......I installed the same keypad controller you show and it works great. But, now my portable garage door clicker that I keep in my car does not work. Do you have a fix so that both will work?

[@lizziewiegert2224]

I have a yellow button and I have tried using the ID number 8, but it’s still not working. Any tips?

[@rajanmathai]

Thank you for the code sheet and good explanation.

[@orbit_gary]

Great video Danny. Thanks for the very helpful code table too.

[@LeiZhang-c6m]

What should I do if my keypad not blink when I hold *and # and same time ?

[@djleodiandrade]

Thank you so much Danny ! This was Drive me crazy !!! 👏🏻👏🏻👏🏻👏🏻

[@MRHUBE2010]

Out here doing the lords work. Thanks

[@vuhoang7109]

Quik to the point and effective!!! Thank you!!😁

[@funnygirrl35]

I did this and now my remote opener in my car is no longer working... Do I need to sync them?

[@emilianopadron20]

Thank you it was quick and thanks to you having that manual on the side big help thanks again

[@DAGenao]

Clear instructions. Thanks for sharing

[@janlesko212]

I've been trying this for 40 minutes. Didn't work. Then I decided to replace the battery...THANK YOU! 😊

[@wesleydou337]

It works for my liftmaster opener which has a purple button. Thanks.

[@aimees4621]

Ohhhh my god! THANK YOU!!!! Bought a house with this crappy keypad and no manual. Everything I found kept saying to hit the Enter button. THERE IS NO ENTER BUTTON!!! Thank you for saving me from taking a hammer to this stupid thing!😂 🔨💪🏼

[@brendanquinn8433]

What does it mean when after I successfully enter my code, the numbers remain highlighted and pressing any number will open or close the door?

[@timhaeussler-yp6qr]

Thanks for providing the opener codes mine was a 2 also.

[@theflashbackchannel6199]

Great video, but I could not get it to work with my green button Craftsman (ID 4). Don't know what I am doing wrong - could it be because my keypad is a plain "Clicker", and not a "2U"? Mine sure looks like the one in the video...

[@DannyPops]

I wouldn't put it past them to have a completely disparate system for a slight model difference. Sorry you couldn't get it working.

[@theflashbackchannel6199]

I took the keypad off the wall and there is a sticker on the back saying that it is a model KLIK2U-P2.

[@UltraEgo09]

Mine keeps setting my code as 3 (my garage code to reset) and I’m not sure why? I’m doing everything exactly as it says in the video

[@cats.crafts.cookie]

I can't get mine to wrk. Could it b I need a new battery. I tried all the different type codes too. Wth.

[@soleo333]

This worked for me, thank you!

[@taunagregory4415]

Best post so far. Thank thank you

[@gbaldus67]

Saved me an hour of my life!!!!

[@andrewparkerMD]

Life saver! THANK YOU!

[@mattbessette9589]

I did all your steps and it worked as you said until the end. When I push 1 button the door opens/closes. I dont even get to enter my full code. Any suggestions?

[@mariahschaaf8640]

I have the same issue!! Hope you get an answer so I can try to fix mine too!

[@UltraEgo09]

Okay I was having this problem and this is where I went wrong - the 0 you hit at the end of you code will now be a part of your code so if you chose 1234 your code is actually 12340 and for about 20 or so seconds after programming it any number on the keypad will open/close the door. Some openers also require you to hit 0 twice. So following the instructions and after hitting the learn button - put in your code - hit 0 then hit 0 again. That may help. It helped me

[@liftacar]

@@UltraEgo09 I'm having the same issue. Tried both of these and it didn't help. When I put the first # of my code it opens the garage door. I have a Genie Pro Screwdriver

[@UltraEgo09]

@@liftacar give us like 20 minutes after you do it. Like I said some openers will open the door when you hit any number after setting it for like 15 -20 minutes. If that doesn’t work I’m not sure. This is just what worked for me

[@liftacar]

@@UltraEgo09 First of all, you're amazing for replying so fast and i love you. Secondly, 20 minutes? lol, I thought you said 20 seconds in your previous post which I gave it 20 seconds and it still happened.

[@Grapplerfan]

Worked perfect for me thanks much!

[@jstylephotography]

Amazing chamerblain opener purple button is #3

[@rickn4301]

Booya! Just needed the code. Thanks

[@lawharrell49]

My man!!! Thank you.

[@RM18188]

Worked great, thanks!

[@MsDonnnG]

So helpful! And I share the same sentiments about this garage door opener!! Thanks for posting!!

[@bgaliant]

Thanks! Worked like a charm

[@kimloanla2382]

I got it right to the part hit the learner then enter new codes hit 0 , nothing happened, no light flashing.

[@jamello29]

Thank you, this is exactly what I needed!

[@wam4985]

Best video thanks for including the codes!!!

[@CraigHofer1]

Thank you. Very helpful.

[@MyJesusSavior]

Thank you very much, It really helps.

[@SharonFlicker]

so helpful! thank you!!!

[@yamilethandre9884]

Great video. Worked for me

[@stevebrown2848]

Thanks for this. The provided instructions are woefully inadequate.

[@Frank2314-y1z]

Ty friend you are the man I did exactly what you said and it worked

[@PaddyMan1988]

It’s working for me. 👍👍👍

[@mebarnes100]

Thank you so much for the help!

[@paulkelly3973]

I need to buy this man a beverage.

[@mrugeshmistry]

This is not working at all

[@vyt-s4d]

Garage id might be different, try 2,3,4 or 8 Mine worked with 8

[@Grapplerfan]

Worked perfect for me 🙏 thanks

[@fasttruck9177]

Thank you thank you thank you! Great video especially that my lift master was code 2, no searching for it. Well don’t!

[@mac2920]

Excellent video!

[@rylangray5785]

Thanks for the help!