Excellent tutorial. My rack had been there for many years so naturally some things offered resistance. This well-done video gave me the assurance to add a little force where needed. His tutorials are always good.
@rackattack Жыл бұрын
So glad to hear it, Ken!
@simonchilli20883 жыл бұрын
Thanx for that. Very clear instruxions and you don't put your hand in the way which is quite common on a lot of vids.
@rackattack3 жыл бұрын
Glad it was helpful!
@stephensaxon90533 жыл бұрын
Thanks so much for this! After the Rack Attack install while driving home I remembered my beloved car wash that has brushes! So this was indeed handy and took away some of the anxiety, will attempt to take off soon!
@carolmontuoro79408 ай бұрын
Good video. Question : I have a Thule Evo clamp base roof rack on my 2020 Acura RDX Just traded RDX in for 2024 MDX . Can I use the roof rack on the MDX?
@Daaab89 Жыл бұрын
Hope Thule paid you for these videos. Your videos were more informative for me then the manual.
@rackattack Жыл бұрын
Hello. Thanks for the encouraging feedback!
@kofeeeify Жыл бұрын
Thanks for ur video. Should I put something (rubber or siliicon pad) between metal clamp and car surface?
@rackattack Жыл бұрын
Hello. The metal door frame brackets are coated in Pebax rubber to protect the vehicle's finish, no other material is necessary. Thanks.
@doughsnakes2 жыл бұрын
It worked thanks. I even found the removal tool. My wife is happy 😁
@rackattack2 жыл бұрын
Excellent!
@richardv.43952 жыл бұрын
Thanks from The Netherlands.
@simonchilli20883 жыл бұрын
My problem was getting the foot pack off of the square bars. Basically the lever had become over the years very stiff. I used good old WD40 to get into the joint. What I didn't want to do was snap the plastic lever which has been on my car in all weathers for about 4 year. That's in the UK so lots of damp driving conditions.
@rackattack3 жыл бұрын
The mixture of weather and time can be really rough on most things, let alone roof racks. My advice on how to help would depend on which generation of Thule tower you have. The UK has slightly different roof rack systems then us in North America. WD40 is great for helping break up the rust. If you have a Thule 480 Traverse tower (my assumption) The lever at the back can be flipped/pried open by gently using a long handled screw driver. If the rust/corrosion is so bad that's not working it might require a replacement tower. I've had to use an angle grinder to liberate many bars from rusty/seized towers, or grab a rubber mallet to help force the issue. Hope that helps!
@juliep9009 Жыл бұрын
How do you replace the fitting kit for another vehicle? I purchased the new kit for my truck but I can't remove the old kit. I can't find a video anywhere to replace a kit for an Evo clamp 😭
@rackattack Жыл бұрын
Hello. The rubber bases peal off from the plastic bases, the brackets remove by pushing upward, then inward and down. Thanks!
@living4adrenaline2 жыл бұрын
What size is the tool you used to remove the rack? Not everyone has the tool handy, don't assume!
@rackattack2 жыл бұрын
The tool is included with the foot pack but if you no longer have the tool, a 5mm hex wrench will work.
@Pr1nc3ssf10na2 жыл бұрын
IT REALLY WORKS!
@rackattack2 жыл бұрын
We're glad you like it!
@georgel3657 Жыл бұрын
Thank you
@rackattack Жыл бұрын
You're welcome
@略奪でる Жыл бұрын
I need to get the metal part off. I don’t know how. So dumb.
@rackattack Жыл бұрын
Hello. To remove the door frame bracket, push the bracket upward, then inward to release from the foot. Cheers.
@略奪でる Жыл бұрын
@@rackattack Good stuff; thank you. Also, I meant that the contraption + me is dumb, not you guys.