HP Prodesk 600 G5 SFF: Disassembly & i5-9500F+RTX3050 Gaming upgrade

[@deeptimanmishra2191]

Your videos are very helpful and look neat and relaxing...Still waiting for prodesk 600 g3 MT videos...

[@itggear3400]

Thank you for your kind words! I’m glad you find my videos helpful and relaxing. Once I get my hands on the HP ProDesk 400 G3, I’ll definitely make a video about it. Stay tuned for more content!

[@deeptimanmishra2191]

@@itggear3400 it's hp prodesk 600 g3 MT

[@itggear3400]

Got it, thanks for clarifying! I apologize for mentioning the wrong model earlier. Once I get my hands on the HP ProDesk 600 G3 MT, I’ll definitely make a video about it. Stay tuned for more content!

[@TeacherGamer1981]

You created a custom console gaming PC. Bravo!

[@pinkomega4937]

you've been putting out really cool videos. if you have the rx6400 please make a video using that in these systems

[@itggear3400]

Thank you! I appreciate your support. I’ll definitely be making another video featuring the AMD Radeon RX 6400. Stay tuned for that!

[@enesjei]

Nice video! I'm curious, does the PSU supply enough power for the additional GPU? I want to do this but with rtx 3060, but i'm not sure if it's even possible considering the form factor and the PSU

[@itggear3400]

It’s not possible to install an RTX 3060 in an HP ProDesk 600 G5 SFF (Small Form Factor) PC. This system only supports low-profile GPU cards. Additionally, the 180W PSU (Power Supply Unit) won’t be sufficient for the power requirements of an RTX 3060.

[@shahrearshakil3910]

Will this run gtx1650 low profile with 180w? ​@@itggear3400

[@yashsoftech3698]

Very Helpful

[@trinitrotoulen]

PCI-E Razor cable/ port extend... x16 perform better approx 10% then x4 port...

[@Gh0styGames]

Yo i have the elite desk 705 G4 SFF the AMD variant with pro 2400g i wanted to swap for pro 2600 or pro 2700 was wondering if you seen any info abt it or if you yuno that would work as i believe they even sell them with those chips.

[@RyanFrazerKnight]

Hi this is awesome! Do you think a 1660 super would work?

[@itggear3400]

It doesn't fit.

[@RyanFrazerKnight]

@@itggear3400 that's a shame , thank you for your reply great work

[@mercurialfred]

Greetings, Question: How many W is the power source?

[@itggear3400]

The power supply of this PC is 180W. Thank you.

[@atent5124]

How much performance are you losing by installing a card like a 3050LP on a PCIe x4 slot instead of the full 16?

[@itggear3400]

I cannot provide specific data since I’m not a technical specialist in this field. However, I can share information based on my experience from installing the RTX 3050 6GB on various systems, including PCIe 4.0 x8, PCIe 3.0 x8, and PCIe 3.0 x4. Here are the test results for gaming in Shadow of the Tomb Raider with the same graphics settings: PCIe 4.0 x8: 77 fps PCIe 3.0 x8: 65 fps PCIe 3.0 x4: 63 fps Please note that the RTX 3050 supports only PCIe x8, not x16. Interestingly, it doesn’t seem to make a significant difference in performance when installing this GPU in different PCIe slots. Thank you!

[@TeacherGamer1981]

​@@itggear3400I believe there is no difference because of the card's small bus

[@jeremytrinidad3236]

Hello, I got tha same unit, difference is it has i7 8700. Bought a new rtx 3050 and it just hangs during start up. Can u help me with this?

[@itggear3400]

In my case, I couldn’t even install the GPU in the PCIe x16 slot; instead, I had to use the PCIe x4 slot. After some Google searching, I discovered that the reason behind this is that the HP ProDesk 600 G5 can only accommodate GPUs listed in the PC specs datasheet. If you install a GPU that isn’t on that list, the PC simply won’t boot. Thank you for sharing!

[@jeremytrinidad3236]

@@itggear3400thanks

[@lutha1720]

I got one of these systems froma friend, i can get a 3050lp for cheap, will this work or is there more stuff to do thats not in the video

[@itggear3400]

You cannot install the RTX 3050 on the PCIe x16 slot because it is too close to the PSU. If you want to install the RTX 3050 LP on the PCIe x4 slot, you need to modify the slot since it is not open-ended. Thank you.

[@lutha1720]

@@itggear3400 great stuff im defs subbing to the channel

[@trinitrotoulen]

The PCI-E pins on GPU may be shorted to MOBO... why not isolated the rest of the pins with atleast tape man....

[@donaldnemesis393]

is it good for 4k video editing

[@itggear3400]

This PC setup can handle 4K video editing, but it might not be the most optimal choice for very demanding tasks.

[@exodus58]

rtx 5050?

[@itggear3400]

Thank you for your correction!

[@kennylender7252]

so because you used a 1x pcie lane your getting less than half the performance you should try using a full 16x riser and watch the performance increase