I shrunk my R1 engine.

[@2STROKESTUFFING]

extra 10% off:2ST Toyan FS-L400：bit.ly/3v1RDH8 Starter kit: bit.ly/3uXsNYS other accessories: bit.ly/3tAsQtk

[@olekristianolsen1287]

The real Reodor Felgen :-)

[@mattearnshaw5526]

Never seen a Cork clutch before will it last?

[@olekristianolsen1287]

Check out O'Neill brothers racing and put a 1/5 scale 2 cylinder in a moped :-)

[@resistencia2temposmonteverde]

@@olekristianolsen1287 ed

[@alaska4229]

I saw that huge grin in the first 6 seconds and knew it was going to be a good video

[@Mikefestiva]

Sounds amazing at 10 MPH 👍 Thanks for posting!

[@ClaudioVolber]

10 MPH? 1 MPH!!!!kkkkkkkkkkkkk

[@kerb389]

@@ClaudioVolber why spam k so much

[@nyftn]

was awesome to hear it ,then see the flyby rofl

[@blkmustang007]

@@kerb389 kkkkkkkkkkkkkkkkkkkkkkk

[@danielbermingrud3655]

3MPH*

[@kiddoduke2103]

Can’t remember a machine that made me smile more than this one did.

[@edwinator46]

kzbin.info/www/bejne/qYSmgGaNqqaHhac this one will

[@kiddoduke2103]

@@edwinator46 yep gotta smile at that

[@afflickracing1705]

That’s better 👊🏼

[@HRM.H]

17:53 till 18:00 sounded like a sportsbike was screaming down the street. But is actually just you cruising at 5 kmph with a nitro rc engine 😂

[@EbonyPope]

More like a speeding weedwacker gone rogue. :D

[@anggaraangga2907]

Ngomong opo to iki

[@gustavgnoettgen]

@@anggaraangga2907 opo

[@EmileModesitt]

That final test ride was probably the funniest thing I've seen in a long time. Motor absolutely screaming as you ride down the road at 3mph xD So good!!

[@diji5071]

Hahahaha

[@johnwbroseley]

it would be brilliant to have this guy as a neighbor, it would be like living next door to emmit brown from back to the future.

[@TonMachielsen]

Last two minutes gave me a good smile. All the way until it broke. I love that you do the things just "to see how they behave". Great channel!!

[@jamest5149]

My German uncle has me in stitches when talking about ‘willages’… V’s and W’s are hard for him 😂

[@biko9824]

Scandinavians right?

[@fr33dumb0]

Haha your self corrections to your English always make me smile. Keep up the good work man! Been following your progress for quite some time now. God bless!

[@ogKEGGY]

My favorite mornings are the ones when there's a new upload from you. 😁

[@Lotek117]

You absolutely HAVE to throw twin blowers on that toyan like warped perception did! It made it sound awesome and really upped the power!

[@haydentavernetti1760]

he snapped the crankshaft and it's still n/a. boost would just pronounce this problem.

[@morkorson4196]

There's a channel , Johnny Q90, he makes custom parts and is even prototyping a turbo for these nitro engines. He makes all his own parts like you.

[@jasonbickford4283]

Short lived but extremely cool to see!Now it's time to take 4 of your design cylinders and build a crank.....you see where I was going. Keep up the mad science.

[@RCTanksTrucks247]

This guy! You sir, are awesome

[@lithium534]

This was zo cool! Maybe a slight bigger engine and that thing would be sick. 15k rpm and 5k/h. That's the life.

[@2STROKESTUFFING]

😁 👍

[@azertyytreza8947]

Maybe one of those RC radial engines from an old fighter plane

[@ukaszszynkowski8960]

I think size of the rider was crucial here 😂 under 40kg kid it would do dissent milage 😜

[@IDontKnowIJustDo]

They do make a V8…

[@ProlificInvention]

If anyone wants to do a similar project: an old paper shredder has a very durable and ideal gear reduction assembly.

[@themadscientest]

Would be the right way to use a small high rpm engine, although top speed would be very slow! I'm currently working on an old Cox model car that uses a worm gear reduction for a high rpm glow engine that seems very simple but is robust.

[@YeeThirty]

Hell yes! Man with out you i would have never been able to rebuild my dirt bikes... first 2 stroke i ever got was my Suzuki DS80 and will never go back!

[@robertmckay694]

Sad it died but nothing ventured, nothing gained and you put a smile on so many faces today. Not to many guys “take a break” by putting something like that together but everything is relative! Love your widoes!

[@MarksRandomVideos]

As with the rest of the internet, been loving these Toyan engines recently. Seeing what you did with it was really good fun :)

[@retired-pipefitter]

You English is way better than most people here in the states. Another great wideo.

[@73Bugman]

What a fun and intriguing project. Love to answer those, " I wonder if that would work ", questions. Good job👍

[@colebremer902]

Awesome execution on something I’m sure many people have wondered about. I’ve wondered if large multi cylinder RC airplane engines may work? Or possibly using a battery powered lawnmower motor/batteries to power a bike? Great video.

[@zreolmeannin]

Those airplane engines are probably stupid expensive, he was given this one by the manufacturer, toyan and it costs about 750$ I think, and for the electric lawnmower idea I think somebody has already done that, considering it’s pretty easy and one other thing is you may end up with a bike but with worse range/power and more expensive to make than to buy

[@lesgaleriensdu2t901]

that's for sure one of the most unexpected video of the year but i thank u so much cause i wanted to see one time in my life a rc engine on a moped !

[@MrTJP777]

At 17:30 I'm sitting here thinking man this is gonna be funny. And then he slowly rolls back in the shot sounding like a badass, looking like a snail.

[@MrJermbob]

The man bro. Love from New Zealand. You keep me smiling.

[@tomnwoo]

I thought the crank would be weak, I'm surprised it doesn't have any bearings supporting the middle of the crank. Cool little engine but only really a desk ornament.

[@tomnwoo]

@Eddie Hitler They don't seem to work as well as a single cylinder. Sadly it seems like these are just a novelty

[@opcolu]

This video is a reminder that even a total failure can be a huge success :) Thank you for the incredible content all these years, and for documenting both success and failure so beautifully!

[@jakec8349]

I mean personally I’ve been waiting no or this video for years glad someone finally made it

[@oscarzt1652]

12:39 yes the higher nitro stuff (20-25%) for RC cars definitely stings more than the 10% stuff I use for my aeroplanes

[@RobMcFlash]

Thats a quickli! Fabulous! A fried of me owns 6 of them. All restored to better than new condition.

[@cannonEDHA]

You should be proud of yourself, what you have achieved over the last couple of years is amazing i know if anyone is going to be the one who achieves big bhp from small engines it will be you i think you should be called mr 2 stroke .

[@machineshopatthebottomofth3213]

The shot near the end with just the noise made me laugh. I was expecting to see a moped streak past, instead it crept into the shot

[@alexanderlinus]

Really cool short little project. We all know 50cc is fully usable and works great for 50 km/h. So i kinda wonder how small you would be able to make a engine to drive a bike at 50 km/h

[@jean-charlesweyland129]

The smallest I know of was the Lohmann 18cc 2 stroke diesel with a top speed of 35-40 kph... at 9000 rpm !!!

[@alexanderlinus]

@@jean-charlesweyland129 i just searched that up and your right and that thing sounds crazy.

[@jean-charlesweyland129]

@@alexanderlinusIt sure is a cool bit of kit ^^

[@MsMotron]

best youtube channel of all time!

[@chrishartley1210]

Well, there are crazy times and there are fun times, but the best times are when they coincide like this.

[@dukiemoto8676]

You were out of frame coming towards the stationary camera sounding like you were going really fast.. and then you passed at about 5mph😂 I loved it. Absolutely the funniest!😂😂😂

[@theafro]

Well, it sounded like a 100mph moped! for a little while at least! Thanks for the wideo

[@alejo8820]

Yeah, broken crankshaft, but was fun! You are curious as a child, very smart and have nice tools!

[@dennisdempseyradiooutofcontrol]

Great conversion my friend! not to worry I am on my 3 broken crankshaft, hopefully the problem will be cured and as for the air filters I used the replacement earbud head phone round foams on mine, you can buy them 10 at a time and they work great.

[@brucefredrick4200]

….and another Toyan crankshaft bites the dust! Nice conversion!! Sorry that Toyan isn’t addressing this issue.

[@alexrateliff4784]

Your projects are awesome! You said video correctly. Don't ever let a native English speaker make fun of your pronunciations. Most of us only speak one language and fail miserably when we try to learn another.

[@Cr125stin]

Very cool to see that engines power put to work. Now you should put that Bouland Motors 1/3 scale Cosworth V8 on a bike! Thanks for the video!

[@DirtyBeans]

I will never get my head around how that pot coaster actually worked as a clutch. xD

[@natereinhold6180]

Actually petty common in old

[@jamest5149]

Scale,is everything… when you were marching and bolting the sprocket to the engine it looked massive and had a ridiculous pitch but then you put the bike chain on it and zoom back and it’s looked normal again 😂

[@jaspervanwetten6997]

The video Nd audio quality is just amazing, keep up the good work!

[@scrapsteenlifeintheforks1943]

It sounds so fast, I love the slow motion shots

[@FoxBodyDale]

Those engines are notorious for tha crank but thats insane you even got that too work!!! Awesome🤙🏻

[@simonrechner9395]

This is some Quality Content! 10/10 Really enjoyed the loose shoelace and the open sprocket at 16.10.....

[@BladSG]

This is so crazy, its amazing, very well done man

[@christhut8140]

Love your videos man. Look forward to them when they come out! Keep up the A+ work!

[@colta51]

Great start to a electronic conversion there atleast.. but was cool to try :)

[@sleddersofnl2302]

Another little dream of mine that has came true, the bike was sick and put a smile on my face. I'm sure a new crank thats stronger could be made even some sort of block mod to put a bearing somewhere to support the crank. Might be wishful thinking but a thought.

[@benjaminmateja4145]

Hello from France. Beautifull engines. Amazing works🤟🙏

[@tylerseabook9423]

This is very cool. Nice work. I love the legs going numb story. It looked cool hahaha

[@martininidragracing7884]

That moment, sounds like an old gp race bike is coming and than the timelapse driveby, made my day 😂😂😂😂 keep making crazy stuff like this

[@tinkmarshino]

What a kick in the ass.. that was a fun video! Thanks for a little fun today..

[@barkerd1960]

I've seen a man push a wheel barrow faster! It sounds like an F1 engine off frame and you're expect the "whoosh" of speed flying by...... Then the crawl. Hilarious. Love it. The expectation was built with the wait. Awesome

[@ITSMYSTUFF]

I love it when you hear this screaming engine sound in the distance and then a 6 kp/h bike appaers. :-)

[@MrNursi]

Brilliant and crazy at the same time! Loved that one Alex. You need to put your thinking hat on and beef up the bottom end to recreate your 60km commute!! :-)

[@DerKrawallkeks]

I'd like to see that with a regular .21 single cylinder nitro engine

[@2STROKESTUFFING]

My thoughts exactly!

[@DerKrawallkeks]

@@2STROKESTUFFING hehe:) do it when you find the time! We'll watch it.

[@sdy5001]

Hahahah I love this thing...and the last pass crack me up... Off screen it sounds like you got it tuned a little better and there's an F1 weedeater-ped about to come screaming by and instead you kind of just saunter and trickle on lolol

[@ld5023]

It's been a long time since we've seen you actually ride a bike lol. Great stuff

[@HRM.H]

Make a fully rc controlled bicycle 😂 some 30kg servos for the steering wheel

[@PPekka]

That sound promises a bit more than it delivers! None the less, awesome bike!

[@hammerdownfabrication]

So cool by the sound you'd expect a rally car to fly by any sec. Then a bike rolls past lol

[@Softairpro100]

Ha! We machine uncomplexe countersinks every day with milling cuters. It works, and it's the cheapest way to get a countersink for allen skrews. So, there is nothing wrong 😁 I'm a mechanical engineer in special machine engeniering and I love your videos! Go on! 😀

[@murraymadness4674]

This reminds me of the movie date night I think it was where the couple claim they are the name called for a resturant table, and then the mob tries to kill them thinking they are someone else, and when they escape they get into a shack and get on a boat and it has the sound of it racing away, and then they pan to the boat with it screaming loudly and moving 2 mph. It was hillarious and unexpected. In other words, that is a huge amount of noise for going really slow!

[@dunichtich100]

The proof that 4 Strokes don't have enough power 😂 Nice project and craftmanship tough 😊👍🏼

[@jackshadowblades2957]

This was amazing. Thanks for the great video. Ive been wondering what all these little engines can be used as, now i know.

[@lorriecarrel9962]

I absolutely love stuff like this creation,very good entertainment watching this.

[@dennisford2000]

New cradle and a press together five main crank offset down with a different pan for clearance for a stroker with the same rods .

[@JThyroid]

Any bike shop should be able to put new spokes on your wheels, or find some spokes for you to put on yourself. I was in charge of my university's bike club for a few years, and did lots of bile repairs. I've even robbed spokes from old wheels that I had sitting around to fix somebody's bike that had just been locked to a bike rack. I've even taught people about how to lock up their bike properly by moving their bike to a different bike rack and waiting around for them. When you lock up a $1,000 bicycle, you should make it harder to steal than popping the quick release on the front wheel.

[@jonmac4100]

Great video and total Harley action. 100HP of sound but 1HP of speed.

[@MrNotStock]

So cool 😎 all the machines are helping so much to make things :)

[@marianito1968]

NSU quickli,i had one back in the seventys,when was young,bullet proof mopet,cheeers from Argentina

[@Littleevil9975]

Wow awesome build bro that’s on another level awesome work

[@MattysWorkshop]

Jam a new crank in it and half another go mate, awesome job, Cheers

[@olympusmons4089]

It sounds like he is going 90 mph, but in reality he is going 4 mph. Very cool video

[@eDO_Venda]

I am looking forward to the Jawa Babetta project. As a Czech, I have my own, so I am very interested :)

[@UltFrizz]

I can only imagine how much dirt and rocks were coming off the front wheel into the intakes

[@tonyseath2278]

That's exactly what I was thinking

[@2STROKESTUFFING]

Yeah, was going to make a filter after initial testing.

[@2smoker311]

Good for it

[@zxcvbnmnz]

Was thinking the same, but most would be to big to fit passed the valves.

[@Thijs_NL]

loving your channel!!!

[@zachgrabow9541]

NOT FAIR YOUR ENGINE IS COOLER! HAHA! Nice work man, i have a 2 stroke motorized bike, this looks fun to try!

[@Phil-dg1yg]

5 mph, 10000 rpm, like it! Excellent 😊

[@ChuckHaney]

Just a thought: When you make your clutch pads, why not glue on one long piece then cut the excess to make the three pads? Since you have to trim the width anyway, you may as well trim the length. That way you don't have to worry about how well they fit when you are gluing them on and each one will have complete coverage.

[@2STROKESTUFFING]

Clever👍

[@robodock23]

Let's face it, we all knew that crank was going to snap. But that was awesome well worth the carnage 👍 another great video man

[@smaom]

Great to see the motor that was produced in country that I come from, Slovenija!

[@kevinghifari2330]

When the sound hit alot Sooner then the actual source👍. Bravo

[@teterouge1472]

17:50 to 18:00... expecting Petter Solburg in a flying in a rally car and.... Lmao... 👌

[@martin09091989]

for someone working in a kindergarden, you make for a very impressive machinist and engineer!!! 👍

[@Alan_Hans__]

It sounds like you're doing warp speed even when it's only jogging speed. Nice.

[@Ingvehetland]

personally i don't like the spoilers in the beginning of the video. i like to see the result in the end :/ Edit: i do like that you used the marker when turning the steel. made it visually satisfying

[@2STROKESTUFFING]

Noted👍

[@mickthemechanic5718]

M7 bolts are found on most VW clutch plates, your local workshop probably has some lying around if you’re ever in need 🙂

[@2STROKESTUFFING]

Thanks for the tip!

[@wayne1959]

Well there you go. I wondered if it would last after remembering the main bearing setup..i loved the tinkering and as we all know, if you dont try you wont know..well done to you mate.

[@2STROKESTUFFING]

Yes. There's considerable wear after just a little bit of running - I'll get some more suitable material, 6082 doesn't cut it.

[@thehaze1972]

Thank you for doing what I've been thinking about doing many times :-)

[@171apples171]

I always enjoy your videos, you should consider this a total win. This is art compared to the jagged, dangerous, brakeless things I butcher together hahahaha

[@natereinhold6180]

Idk how hard it would be, but could you tig in a center support and machine bearing surfaces or a roller bearing and turn the crank into a 2 piece to make it work? It'd help quite a few people out from what it sounds like. It'd be a good service to get into possibly....

[@defaultdriftco00]

RIP toyan fs-l400! Pretty awesome video!

[@acurarl9929]

Absolutely love what you do man. And this lil engine is super cool. I was into nitro engine 20-25 years ago. There was no 4 cyl nitro engines like this thing back in the day. Or if there was they were for the wealthy not us normal ppl.

[@colinunderdown1758]

Completely bonkers but loving it.

[@madcarew5168]

Harnessing that power can't be easy!!!