Did Seafoam Ruin My Car?

[@daverunner3397]

Im a retired CG mechanic and currently work on firetrucks, SeaFoam in my humble opinion is the only engine cleaner , pour in fuel system cleaner that does what it says. Personal vehicle is a 2000 4runner v6 4wd pushing close to 300,000 miles and it runs like new.

[@yoimron]

Hey just curious, how’s your 4runner doing now?

[@daverunner3397]

@@yoimron 300,000 + miles, still running strong.

[@MikeKollin]

@Freedom Will Prevail Try it and see what happens!

[@G35Jeesh]

@@daverunner3397 That's sweet, gonna pour some of this into my 2001 4runner with 207k miles once its out of the shop. Getting OEM LBJ's, uppers, and wheel bearings done right now. Super strong vehicles

[@feralmale1517]

@Freedom Will Prevail Spray carb cleaner in the egr valve.

[@DarksurfX]

click bait. car is fine..

[@John_Doe....]

his eyebrow isn't 😂😂😂

[@quentinc1275]

He said did seafoam ruin my car not seafoam ruined my car

[@TallyMark]

Thanks actually. I’m shutting the video off and now. 30 seconds In. Lol

[@rwt143]

Tried it on my Tesla and I didn't see any smoke.

[@digitaldynamic7490]

You didn't do it right. You need to pour it in the cupholder...

[@thauhidsarker2205]

dude its usually for gas engine. not electric. its work if due to carbon build up, new car, and electric car normally doesnt built up anything in the engine. thats why u did not see any smoake cuz nothing to clean. its already clean.

[@peterklym930]

was it electric Tesla you idiot????????????????

[@sleepyhollow783]

Always funny when people do not understand the humor...

[@roderickconstantino5354]

dood, wrong. Need to put it in with the blinker fluid.

[@fifteenbyfive]

My timing belt broke on my interference engine and ruined my valvetrain and everyone said my engine was destroyed. Well, I didn't let that stop me. I poured three bottles of Seafoam into my gas tank and drank the 4th bottle to clean the carbon out of my own body and now my car runs better than when it was new, and so do I. I never get colds anymore and I used to get sick all the time. Seafoam took three seconds off my 50-yard dash time, and I also don't sweat out of my skin anymore like I used to.

[@noname-sq9pm]

That's some good shiddd! Have to try it for myself!!

[@bensonwest6821]

Hahahhah

[@the.internet]

#metoo

[@angelpartida5134]

Someone get this man to the hospital

[@Pyramidbuilder1]

Creativity peaking

[@governwatchdude3300]

I used it on my f-150 (5.4 ) with 220,000. It was missing under power. Tried several other cleaners with very little improvement. Used the Seafoam and it has been running like a new engine ever since.

[@williammullins7888]

How did you use it in fuel or intake or oil?

[@menogusta9829]

It's not really to improve a car that's already somewhat clean... My sister's first car was a junkyard Mercedes that wouldn't idle and shook like crazy, made no power. We dumped a whole bottle in the gas and filled the tank up then drove it around for the whole tank. The results were crazy, it idled so smooth that we thought the car died at a red light afterwards.

[@menogusta9829]

@Deondaray agreed new gas would help but the seafoam cleaned all the bs from the old gas. 21st century gas does not age well

[@dougsnova1]

been using seafoam for over 50 years,great stuff.Keeps ur engine and fuel system clean also works in automatic and standard transmissions. Good to use in ur vehicles once a year if u put alot of miles on them.

[@highdefdinardo]

im not a mechanic by any means, but everyone I talked to advised me to changed the oil basically right after doing this.

[@chrissmilich3530]

Thats what he did..if you paid attention

[@rodeobum1561]

Sea foam says to drive the car 100 miles before changing oil.

[@SuperChewy808]

EXACTLY!!

[@cherbear1996]

I was told to use it 300-500 miles bfor my next oil change

[@Ty_ThatGuy]

That would be correct, Sir !!

[@RamblinGarage]

Anyone watching this, just an update on what he said. Putting the seafoam in the oil won't make the engine smoke white, putting it in the vacuum will (the video shows this) as it's cleaning deposits in the intake and such. Also, don't just dunk the tube into the can like he did, you can potentially hydrolock the engine (worst case, but why risk it). Slowly pour the seafoam into the vacuum line and keep the engine from stopping with the throttle.

[@KalvinMalli]

Appreciate the heads up. However maybe about 2 floz were left sitting in the engine, I just stopped keeping it alive with the throttle so it would die out. So need to worry however yeah putting a lot in a once is not a good idea!

[@thisperson6655]

Stupid way to add the seafoam. Never completely submerge the hose in the liquid until it kills the engine

[@user-px1wj2uv3r]

Hydrolocking an engine with 16oz of fluid? Come on now....

[@garrycowan4747]

The engine should rev @ 2000rpm during the spraying, get a friend or,,,,jam the pedal with a piece of wood to the seat, did work for me 😂

[@user-px1wj2uv3r]

​@Bob Watters Well, this question is technically pretty big. 1. Engine size matters obviously. A lawn mower getting fed straight "liquid" might lock. A V-8 would need half a liter of only "liquid" and zero air to lock. 3rd and probably most important, the compressibility of the liquid matters. Benzene for example is almost twice as compressible as water. I'm not sure what's in Seafoam but I know it's a hydrocarbon. You would need to seriously dump an absolutely boat load of that stuff in to hydro lock and the average engine. IMO...of course.

[@josephruybal5791]

I use it every time before oil change, I notice the difference almost immediately. I give thumbs up to seafoam.

[@MikeSmith-fq5dv]

How exactly? Like do you use the whole bottle and how miles do you run it before getting the oil changed? Please lemme know. Thanks take care!

[@DerekPetersen01]

@@MikeSmith-fq5dv instructions say to use 1 ounce for every quart of oil so around 5 ounces on average but I usually eyeball about quarter to a third of the bottle in the crank case and the rest in the gas tank. Run for about 100 miles or more if you want but it will wear down seals so be careful running it past 1000 miles. Then change oil. If you want to put it in your intake like the vid get the spray bottle with the nozzle and put it behind your throttle body and use the whole thing 👍

[@josh19930]

@@Pernoctate definitely. Also, if the suburban is factory, it’s fuel injected.

[@myopinion7533]

You can also add Lucas in the oil to help with oil consumption . These two products together are great for old engins .

[@rogercoleman8515]

Seafoam intake spray worked pretty good on my 92 nissan. No smoke..better response, idles smoother, I had a fuel smell when I started..gone, runs quieter.. definitely worth the 14$.

[@Turco949]

Right after I pour the SeaFoam in the gas tank, I always throw in a burning match afterwards. It thoroughly cleans everything up inside and out.

[@peterklym930]

Idiot! I have a grandson who tried this to see how much gas was in tank, he lived through the ordeal!!!!!!!!!!!!!!!!!!!!!!1

[@ak47bobbarke]

XD 🤙

[@kornboyjr6419]

Peter Klym ????

[@dini1046]

THanks or the advice. It worked!

[@redriders7149]

I had a 1988 Toyota Camry with 632,248 miles. All cylinders had almost no compretion, the serpentine belt was freyed with almost no tension left, D/S headlight was out, water pump was on its last leg, heater core was holding on for dear life, trunk latch had the strength of a chip clip, and the carburetor didn't know if it should send fuel, air or just send up a prayer...............and you know it boys. ONE CAN OF SEAFOAM, and every ailment that little Camry had instantly fixed and was better than new. Life long seafoam user and a witness to its miraculousness.

[@nhra1625pixel]

hey dude, should probably change the spark plugs after this. the seafoam tends to "clog" them with all the crap.

[@HeinzGuderian_]

The problem with the timing belts on Nissan 240s is that it's a timing chain. Seafoam will correct that issue.

[@RoyTheBoy_yt]

"Now we just dunk it in and let it die" omfg hydrolock😂

[@Ty_ThatGuy]

Yup. I thought the exact same thing.

[@finalcountdown5353]

if my car's head is hot, I drop an asprin in the gas tank

[@ahmederam12]

make sure to change the plugs as well if u havent already done so

[@MikeSmith-fq5dv]

Are you supposed to get new spark plugs if you add some of this to the crank case oil?

[@UhBuddy1976]

Bubba, I put this stuff in a lawnmower that had not been run in years. The lawnmower would smoke from a cold start because the valves were dirty. I ran some seafoam through the gas tank. Not only did it make the engine very strong like new again, it completely stopped the smoking from cold starting.

[@RandomActivities]

All cars should be required to be RWD! The old 240 was a great car! Upstate NY is a beautiful place!

[@svnbit8408]

For plaque buildup, I use expensive mouthwash, swishing at 3000RPM for several minutes, then swallow. I can tell it's working as more brown buildup comes out of my tailpipe. I can't tell the difference but my mouth feels cleaner and it beats having to clean my teeth with a brush and get dental cleanings!

[@SuperBobos12345]

well atleast you did not suck your sleeve into the fan blade .watched mostly to see how close you came ..let me tell you this gentleman .you do NOT want to wear long sleeves while working on a running engine .lots of dummies missing body parts or the rest of their lifes .

[@danbruns543]

Don't bother watching - the video proves it didn't harm (RUIN?) his car. It's just Seafoam bashing!🚫

[@e30_leevi]

record u fixing the timing chain noise

[@tlbonehead]

I've used it in the crankcase for sticking lifters, including my old 240SX and it worked every time.

[@mightyspuds]

Me too.

[@jasonbarnes2636]

I’m investing on Seafoam Stocks now.

[@martyjohnson4894]

I have an 07 F150 with the 5.4 Triton. I ran sea foam in preparation for the dreaded spark plug change. Plugs were almost carbon free and made for easy removal. I use it and will continue to use it.

[@gheka35]

How did you use it? I used it for the gas thank and before the oil change but I don't know how to use it for the intake

[@martyjohnson4894]

I dumped a can in at the gas station. I did that twice leading up to the plug change.

[@eduardomartinez7855]

Show us how to fix that chain noise thing

[@brandoGTR48]

Eduardo Martinez it's a guide under the valve/timing cover

[@elvispresley3327]

brandoGTR48 he got rid of it and it still does it

[@JusSkott]

Simple, take off valve cover, unbolt both 10mm's throw guide away and put valve cover back on.

[@LNEMRecordings]

Timing chain guide delete

[@Mike82ARP]

I did this on a used LS430 we bought.It had 75K miles on it. I did the Seafoam through the vacuum hose, let it soak for about an hour. I did this at night so the neighbors wouldn't become concerned about any smoke it made. And am I glad I did! The smoke cloud was huge and was pouring out at a good rate for almost 1/2 mile. More importantly, I noticed an improvement in pick up, however I didn't take any measurements- just butt dyno.

[@tonyinfinity]

This video makes me grateful I live in San Diego

[@KineticTaco]

Mmm taxes

[@tonyinfinity]

@@KineticTaco Mmm palm trees, beaches and mountains

[@endersstare328]

I have a KA in my frontier, with the vertical throttle body, I just took the air filter off and dumpped a bit into the engine at a time, and it did great! I had the engine at about 25% throttle.

[@duderama6750]

I quit smoking dope, now I drink Seafoam for breakfast, and I fart smoke.

[@mikehigby7897]

the faster acceerlation is because there is oil in seafoam for upper cylinder lubrication. so after blasting your engine with sea foam for a period of time it'll feel peppier then when the seafoam is all burned out of the engine it'll accelerate the same as it did before.

[@caseycampagnari8854]

Seafoam works good, but I like putting two cans of Berryman's B-12 Chemtool in a fresh tank of fuel. It cleans the crap out of injectors. I always notice the biggest difference the morning after I treat the tank. Two cans cost as much as 1 can of Seafoam. Thanks for the videos Kevin!

[@1221Ralph]

Casey Campagnari my seafoam can cost me about $5

[@18subiewrx92]

Casey Campagnari Seafoam is getting pricey in PA. 2 cans though?? dang I always just did one can or bottle of whatever I buy. I like to mix it up. Sometimes Seafoam, sometimes mystery oil, I've tried B12 before and basically everything else lol. So 2 cans is better than 1 in a tank?

[@caseycampagnari8854]

Michael Eby Two cans of B12 in the tank made a world of difference in my car. B12 is half the price of Seafoam (usually). Sale prices make a difference, but on a normal day, B12 is $4.95 per bottle and Seafoam is $9.99 to $12.99

[@1221Ralph]

Casey Campagnari Jesus Christ seafoam is expensive there. Its $5 at Walmart here in Los Angeles. Would B12 help with cleaning injectors?

[@caseycampagnari8854]

1221Ralph in my opinion, B12 is the best for injectors. Treat the tank, drive home, and see how it runs in the morning. The next morning is where I noticed the big difference in performance

[@muscleman369]

I did the TRIO! gas tank, crankcase, and intake. Stuff is dope on clearance! Very cheap for what improvements you gain. Haters are just mad they aren't mechanical enough to pop the hood lol

[@Lillaoboiz]

You have to change your oil the next day ...

[@e30_leevi]

doesnt it burn off?

[@KalvinMalli]

+jakk chitpasong no you don't lol

[@TrekkerMoto]

Yes you are. You're only supposed to run it in the oil for around 100-300 miles. Running it in the oil, it does not burn off and it collects large deposits from the engine, which is why you change the oil. Second you are supposed to dump it in as fast as you can WITHOUT it dying when going into a vacuum line. If you dump it fast enough for it to die, there is a chance of hydro locking your motor. You don't let it "sit on top of the pistons and rings", the cleaning of it from the vacuum method is the expantion when it burns. Before you argue about changing the oil, go ahead and read the directions. IF you want to argue after that, go ahead and ruin your car lol

[@korgied]

Yes, you actually do.

[@travispratt6327]

I saw a video where someone did this method with water, slowly introducing it into the vacuum line, and it completely saturated his oil, milky white, so ya I’d bet a lot of gunk and cleaned out carbon gets into your oil using this method, and probably most importantly will end up clogging your oil filter which leads to oil not flowing right and your entire engine not getting lubricated. Besides oil changing is the cheapest and easiest way to prolong the life of the engine, and chances are your crankcase is full of sludge and needs some frequent oil changes anyways.

[@NYRM1974]

I've seen in the past Seafoam causing engine issues that being said. I instead use Marvel Mystery Oil. I take 6 ounces and put it in my gas tank..... this keeps my fuel injectors clean.... Every oil change I add a quart to the crankcase with my preferred oil to protect my engine. 177k miles and still going strong zero issues so far.

[@dayofhappiness]

You did not follow Seafoams instructions . Pore directly into crankcase . Put 1 ounce per gallon into gas tank . Spray Seaform spray into carb /throttle area .

[@edgarbenjoseph3879]

In the gas tank, you can put as much as you want. That's what the official Seafoam videos say.

[@JoesAutoElectric]

I know I'm late to the party, but when you add that to the intake, you should not be doing it that way. The right way is through a vacuum canister, where you can control the output of fluid to the intake. Doing what you did here is a good way to cause the engine to hydrolock. Just a friendly word of advise.

[@MrChaseInc]

Why is the title “did seafoam ruin my car”? That made no sense.

[@brandonyoung8709]

So you would click on it.

[@victorborg7285]

Used it for years. I finally pulled my heads off due to a head gasket issue and I was surprised how clean things looked for a ford with over 500k on it. Lucas oil stabilizer in the oil and seafoam in the gas simply works.

[@jamesb8305]

sticking the vacuum line in the bottle is a good way to hydrolock the engine.

[@joeallen9897]

Flats so is gasoline, put three ounces of gasoline in each cylinder, tell us what it does.

[@PainterD54]

I don't think Seafoam claims to give any more horse power. It just cleans up carbon deposits (that we do know) and cleans fuel injector and carburetors very well. It is also a very good fuel stabilizer for long term storage so the gas does not go bad and gunk up your fuel system.

[@majormax3764]

I really don't think that's how you're supposed to do it

[@tahoma6889]

But, why do times have anything to do with the goal? The goal is lifetime of the engine, not performance. Typical young thinking. My grandmother taught me years ago, Slow down, you will get there quicker. And she was not talking about traffic. She was talking about life. Goals and achievements. I find it ironic that is does apply to traffic.

[@Saul-uw2mh]

Everyone in the comments is a engine mechanic all of a sudden

[@Chris-mo1rt]

Yamborghini ikr

[@KalvinMalli]

+Yamborghini they always are 👌🏼

[@Mikesturbinizderti]

Yamborghini because KZbin lol we just learned one of the best things you can do to your car if pos....hydrolocking is the best to way to clear up your car problems...he didn't show the tow truck step though

[@tnbn55]

Yamborghini a good car model?

[@ziggylothbrook8644]

Josh Hodgeman LMAO

[@shperax]

You are NOT suppose to use your vacuum line to put seafoam into your engine. You want it to go through your throttle body.

[@Spacebarf]

Cool video dude! I prefer to use the Seafoam spray when adding to the intake side of the engine! you can add it right where your intake filter is and it will clean throttle body also :)

[@southerncross3638]

Never let it touch your MAS sensor.

[@ginnroad]

Seafoam has been around for over 30 years. It was developed by a guy that was a boat motor mechanic. He originally saw a need for the problem of boats and other recreational equipment that sat up for months at a time. Gas setting up in carbs and tanks tends to go bad. Seafoam was the answer for this problem. It is more of a general cleaner of fuel lines and carbs. but is not a miracle worker.

[@outofgas5293]

There's you problem at the back of your car! You're a new yorker!

[@elliottroca]

You are supposed to rev the engine at 2000rpm when injecting it then hot soak for 10mins then drove aggressively until the smoke is gone

[@115zombiehuger]

1. You should never let the car die, with this product inside the engine. 2. if you put it in your engine oil it will act as a thinner, there for the oil is no longer effective IE you should has changed the oil after letting it idle for a minute of two. 3. why would you put this engine cleaner through the vacuum system and not the intake manifold where most carbon deposits lay.

[@itsl3roy890]

Reapers Merc right on number 1 wrong on number two did it on mine oil stayed the same just real dirty

[@Dabber234]

Its L3roy if you don't change it at least 50 to 100 miles after putting it in your oil then what's the point of using it all the stuff its meant to clean is still in your oil resting in your pan

[@geekhillbilly2636]

I have a 1999 Ford Ranger(215000 miles) with the 2.5 4 banger engine. Seaform quieted it down, and when I did a scope inspection, the carbon buildup was all but gone. The truck runs better, more power. The little blue booger runs like a scalded dog now. I swear by the stuff. You ought to add a full can every other month to your car's gas tank and 5 ounces to the oil after every oil change, as I do my truck. Buying Seafoam is Money well spent

[@bobbg9041]

I love how he kept the garage door open and let that shit blow into the house to breath later! MMM Nothing like the smell of burnt carbon in the morning! Just like Momma used to make!

[@TheHandy23]

that's funny

[@user-px1wj2uv3r]

Seafoam smells a little like race fuel when it's burned, so that's fine by me! haha

[@bda2696]

It was also spilled on the car door.

[@dereklee6090]

actually the smoke is from when you put it in the vacuum line since thats going straight into the combustion chamber, putting the seafoam into the oil pan doesnt make it smoke

[@Whitevaliant01]

How does something "soak in" to a piston ring?!

[@Loincourt]

+Craigsta: I know what you mean. That created a weird image in my head.

[@youdeserveit8575]

It doesn’t soak in to the metal, but it does soak into the carbon ON the metal!

[@74dartman13]

That's good stuff! I bought a '74 Dart...318 V-8 from an old lady. She only put like 200 miles on it in 2 years! Put seafoam in the tank and I sprayed Marvel Mystery Oil in the carb in stead of Seafoam. The combination worked wonders! Cleaned out the nasty gas that was in system and MMO smoothed out the valves. Btw...the MMOil comes in a bottle. I just find an old spray bottle and pour it in that to use as a spray. It runs like a new engine now!☺

[@2002drumsonly]

The butt dyno never lies! Gonna get some seafoam for my bike.

[@hotroddaddy-et4xg]

i put their winter storage stuff in my hot rod.had to drop the tank and replace all the filters change the oil 3x's,then rebuild my carb before it would run properly again.the winter storage stuff is garbage!!glad to see you had good luck with the other products.

[@jacktheboss4life350]

there is 2 types of sea foams though

[@allfiredup200099]

i wouldnt use seafoam in the oil myself but what i have done is pour a little ATF IN THE OIL,a strong detergent and then change oil really does clean up filthy internal eng parts

[@KalvinMalli]

These comments are so gold 👌🏼😂🔥

[@azeissler1987]

I have never seen seafoam used this way. I was told to only throw it in your oil before doing a rebuild. Always change your oil after using! It's known for seeping past rings.

[@007Kellam]

Arent you supposed to let the car warm up before adding it? I'm not a seafoam expert my any means, so I may be wrong

[@KalvinMalli]

+007K Yes. I did. Just didn't show it.

[@007Kellam]

Oh gotcha, cool man :)

[@joeydrifts]

Spectre398 nobody cares

[@ronvocht9559]

I used SEA FOAM,...In my dads Kubota diesel tractor that was running sluggish ! ...In just about 5 minutes at idle, I could definitely hear the RPM's increase, and it ran much smoother like it should. Sea Foam is also a good "winterizer" in your fuel tank, as it prevents "gasoline residue varnish" from forming, along with water condensation from being in storage. ... I use it, I like it, ...and it eliminates that awful "rotten gas smell" from being in long storage !

[@JoeHynes284]

I'm wondering how much damage that is doing to the o2 sensors and cats

[@Loincourt]

Joe schmo: That's a good point.

[@michaelthurman9272]

it says on the can "oxygen sensor safe", never had a problem with it hurting sensors

[@redzokalender1733]

Cat will get clogged up remove before using it

[@ForwardEngineering]

You have to atomize it through the intake or else you can essentially hydro lock your block....

[@utubeskreename9516]

And how do you properly "atomize it through your intake"???

[@ForwardEngineering]

@@utubeskreename9516 charge it into a aerosol can or buy it already in a pressurized aerosol can. If the non pressurized liquid stuff is made to go into the fuel tank or oil.

[@utubeskreename9516]

@@ForwardEngineering Understood. Thanks.

[@tazswagg]

repaint the top black bro

[@505BOSE]

I pranked my friend when i was checking her oil with seafoam, she thought her engine was done.

[@msalazar89]

I put 2 cans in my tesla and it works great!!!

[@dondotta1113]

😭😭😭🤣🤣😂😂😂😂

[@jeffpollard7304]

Did you put it in the gas tank AND the oil?

[@ytSuns26]

I used it once , only once . I went back to misting distilled water, water is cheap and works really really well.

[@odidiaz7492]

one word...INSTRUCTIONS lol

[@Dhdub683]

For real 😂

[@Opiemus]

Yeah, he used the gas treatment where he was supposed to use the spray in injector cleaner. He also neglected to do the hot soak! 🤔

[@jacobliddell4351]

Three things here: 1. That’s not how you introduce Seafoam into the induction system, 2. You never leave Seafoam in the crankcase. It’s a flush not an oil friction additive. 3. You definitely did not pour enough into the tank.

[@edesir]

WOW! Seafoam really werk werk werk, werk werk werk!

[@heathenthatheretic5960]

I did this yesterday and the results are. I had no smoke at all come out of my exhaust

[@frankie4257]

I've seen tap water squirted into intake while revving clean a good bit of carbon off

[@linkscott9874]

You ever heard of something called hydrolocking your engine? With seafoam its petroleum based so it lubricates and cleans. It's also why they have you keep your engine on 2000 rpm and you don't kill your engine with the spray so you avoid that.

[@davidlunsford6155]

@@linkscott9874 it does work. But you don't spray it in. It "steam cleans" it. Ask any old mechanic. Just FYI 😉 it has to be a very fine mist.

[@SuperChewy808]

Read the instructions. If you add to the oil you are only supposed to idle for a short time then do an oil change. Adding a solvent to your oil essentially removes the oils ability to lubricate. You are NOT supposed to drive the car with the sea foam in the oil. Leaving it in the oil long term can cause excessive engine wear and damage.

[@bonniebabyboo3095]

Thomas Whinnery the vid I watched earlier says use sea foam "before OR after" oil change. I suppose that means the foam "can" be left in the oil for a period of time.

[@GospelTruth37059]

I really appreciate theses videos, lets me know what products really work! Thanks guy , high 5!

[@finalcountdown5353]

I treat my vehicle like I treat myself,if it runs like shit, I give it Pepto bizmo

[@junioracmilan70]

seafoam can't ruin a car that's already ruined

[@hey_buddy_waz_up]

junioracmilan70 YES IT CAN I HAD A THROWN ROD AND I POURED A CAN INTO THE TRANSMISSION AND BOOM! IT RUN LIKE NEW!!

[@IAmMisterD]

@@hey_buddy_waz_up hahaha, did it run like new before or after the BOOM! ?

[@The_JDM_Dynasty]

Can't wait till Thursday! Happy New Year man..

[@StrayaKidFilms]

We get it, you vape

[@ATeaNTea]

NissoMoto facts

[@jessiahsmith8606]

I USED SEA FOAM IN MY 2003 MONTE CARLO SS AND THE 0-60 TIME WENT FROM 10 SECONDS TO 6.5 SECONDS SHE HAS 230000 MILES AND I CAN DEFIANTLY TELL MY THROTTLE RESPONSE IS QUICKER AND ITS NOT LAGGING

[@KalvinMalli]

+Jessiah Smith Yeah man. It works!

[@radioace318la]

Looks like that stuff could wreak havoc on the catalytic converter. I did learn never put 100 Oct LL aircraft gas into a car with a catalytic converter. Very Bad Things Happen.

[@tilliebolton2227]

Rick Shelton that's why you just take it off :)

[@JCricket900]

Actually seafoam does the cat good. The smoke coming out from the seafoam is smaller molecules than the carbon emissions. It will help clean your cat a little in the process.

[@davidmorse5690]

Yep, I did this years ago on my Ford Ranger and the Cat went three days later. Guy said it was destroyed.

[@josephrodriguez5863]

These videos of just normal maintenance/care for the cars are my favorite👍🏻

[@KalvinMalli]

+Joseph Rodriguez awesome!!

[@dirtrider1877]

Nice hot air intake

[@Loincourt]

+Dirtrider 1: Yep. I was wondering if anyone else noticed that.

[@davidlunsford6155]

Lol. That's a ricer with the bee exhaust.

[@skippy2987]

If you're recording video for performance, it's best to record a sweep through the zone you are testing. ie 20-40, you should be foot flat 15-45 and timing from the video, that way throttle response and minor starting differences in speed don't show up in your time

[@ericrojas3200]

Can you make a video about the check engine light.....oh...nevermind.....its a nissan.....thats the problem

[@KalvinMalli]

Oh man that's a knee slapper right there!!!!!

[@bombardier420]

if you get a smoke show with sea foam in the oil you have shot rings or valve stem seals, should be minimal. also, for the vac line, much better to get a small funnel or just roll up a sheet of paper and make one...keep it at high idle and poor steadily, keeping it just running. then yes, give it a good pour or dunk the hose in to kill the engine.

[@81quiroz]

I personally thought the liquid was supposed to be for the gas tank not the intake and the spray was for the intake

[@angelpartida5134]

It's literally the same stuff, the spray can makes it less risky. It says on the bottle that you can do that

[@tlbonehead]

if you put it in the gas tank it obviously goes thru the intake. Both ways work.

[@CDeWigDrift]

If you add it to the crank case make sure you change the oil right after.

[@KalvinMalli]

+Christopher DeWig Why? It burns away..

[@ghettohillbilly1]

not in your oil it doesnt

[@CDeWigDrift]

Yea that's what I thought to. but seafoam actually suggest you add it to your oil up to 300 miles before a oil change. it also says it is safe to add right after a oil change as well. no joke check out the site seafoamsales.com

[@CDeWigDrift]

I've been doing it wrong for a long time. I just let it run for awhile and then drain my oil....... I've been wasting it.

[@jimmcburney5781]

Christopher DeWig m

[@Chris-mo1rt]

How are you gonna try to tell a man that has been working with 240's for a long time what to do in a comment section 😂😂😂

[@KalvinMalli]

+Gucci Mane kids these days 😎

[@armedhippie]

Has something to do with his balls havent dropped yet.

[@joeydrifts]

armedhippie bro he was like 20 when he recorded this yet lmao

[@Kirawolf1971]

I prefer to use the seafoam pour in gas tank method.

[@hey_buddy_waz_up]

Seafoam is the shit. My engine threw a rod, so I poured a can into the transmission and my car runs like a champ now!!!!

[@timewa851]

it actually gave this nissan some Vtec, he explains @ 9:53.

[@BucketOspuds]

Anthony Palumbo Dude same! I while back my 305 ate a spark plug, dropped a valve, and broke the crank in half. I put a can into the windsheild washer tank and it runs great!

[@mokelv]

ok how does a champ run

[@juliansaiz5714]

Anthony Palumbo lmao my blinker fluid ran out, put in sea foam in the coolant so the oil stayed lubed, gave me a good 20 more hp

[@Joshuavila_jpg]

gay romano ?

[@brackoncorbridge1966]

pull the vacuum line directly from the break booster as u run the motor and keep at higher idle.

[@Mumbamumba]

I'm an internet expert on everything.

[@wevdog]

if you put this stuff in...don't leave it in. It thins your oil.. Loading the engine is the worst. Put in in, run 1-3 hours light driving....drain! Do it before you change the oil.

[@sergeantspeed5941]

all these sea foam pros but nobody ever read the instructions?

[@MrZombies24]

Sergeant Speed tons of different ways to do it on Internet haha. I've seen many different methods

[@TheScottyp1]

specifically says not to do it this way

[@sergeantspeed5941]

TheScottyp1 no, you can. it says specifically that it's to be used in all 3 spots. intake, gas and oil.

[@TheScottyp1]

not what i was referring to it specifically states do not submerge tube in solution. i know you can do all 3 as i have in my car. smarty pants lol

[@sergeantspeed5941]

TheScottyp1 well you gotta be more specific lol its only to keep from hydro locking. I thought you referred to the pouring in the oil.