Meguiar's G200200 Hybrid Ceramic Clay Kit!

Today, we put Meguiar's Hybrid Ceramic Clay Kit through the Apex Detail Review Process! Why use a clay bar on your paint? After you wash and dry your car, rub your fingertips across the top surfaces. Don’t be surprised if what you feel is the presence of harmful contaminants such as over spray, fallout, brake dust, tree sap, and more that have bonded to your paint finish. These contaminants prevent the paint from reflecting light and shining to its full potential. Maguire's Hybrid Ceramic Quik Clay Kit contains everything you need to restore a smooth-as-glass finish AND leave behind a layer of Hybrid Ceramic Protection. The Included Synthetic Clay Pad is designed to perform like traditional clay yet is easier to handle and can be used over and over again! Plus, it’s dialed in to effectively remove bonded contaminants without hazing the paint. Maguire's Hybrid Ceramic Detailer is not only a great lubricant, allowing the Synthetic Clay Pad to glide with ease, but will leave behind a layer of Hybrid Ceramic protection that beads water like crazy!
Meguiar's Hybrid Ceramic Clay Kit....www.amazon.com/s?k=meguiars+c...
Get a smooth-as-glass finish while protecting paint in just one-step
Hybrid Ceramic Detailer lubricates the Synthetic Clay Pad & contains advanced Si02 Hybrid Ceramic protection
Delivers enhanced slickness, shine and extreme water beading action
Specialized Synthetic Clay Pad effectively removes bonded contaminants and smooths paint without hazing
Premium Supreme Shine Microfiber Towel included to gently remove excess detailer
apexautodetail.com www.apexautodetail.com/
#apexautodetail #meguiars #meguiarshybridceramic

[@apexdetail85]

Does this kit make sense to you?

[@jackemerson1171]

Nope - doubt this “kit” will be a mover. Great demo as always

[@chadj8349]

Apex Detail not to me, it’d make more sense to include a polish.

[@luketuttle1096]

Nope, I'm not to keen on this either. Needs a polish included, one with SIO2 cause polishing after using this kit will more than likely remove any SIO2 the detailed left.

[@RipJawsX95]

Nope not one bit

[@jayz313]

Almost, looking through the eyes of the retail DYIer, yes. In a realtively safe manner is getting that person to better maintain his clear coat. I agree with other's this kit should contain a hand polish, or maybe a SiO2 cleaner wax. Meg's next step would be to bring yo market a really nice sub $100 DA. The largest expense in detailing are the liquids and pads. So get the DYIer hooked, this product could be the gateway drug for the DYIer, with the addition of a hand polish, and Meg's adding a quality entry level DA polisher to thier retail line. A step in the right direction.

[@VapeCigHouston]

Nice video, thanks for your hard work Apex Detail

[@jgatchaljgatchal8350]

This reminds me of that Turtlewax Ice "clay" kit they had years back.

[@anthonywhavers8232]

I was wondering about this kit when I saw it on the store shelf. I thought it was kind or redundant but glad you tested it. I didnt think it made sense to put an Si02 product as the next step after claying of any kind.

[@beda204]

I used it to clean my car from contaminates then compound & polished it. Results were pretty amazing.

[@StrongFreak13]

Damn you get these up fast

[@nicorallysport]

I love your work Brian! 👍 😉

[@BrianFahrnow]

Thank you! I love you!!!!

[@larsdahl6594]

Your camera work is just fine. 👍 Some KZbinrs that I otherwise really like and respect have turned their videos into Hollywood-like productions with fancy transitions, effects and annoying electronic muzak, making their content almost more about filmography than car detailing. Keep it up just the way you're doing; if I want to learn about advanced video production I'm sure there are plenty of channels catering to that.

[@norcalspitshine9067]

Thanks Brian

[@normanrobinson4342]

Great video as always Brian. What polish would you recommend to be used following this lightweight clay?

[@onrdetailingnews802]

Great video buddy i waiting to see you use this great video buddy always

[@Bloodx999]

You were right “ceramic” products coming out everywhere

[@lifeofbrian9511]

Thanks B!

[@fazmercs532]

Great video

[@clow242]

You should try Wowos quick detailer. Very slick!

[@robbalsley4759]

Brian, I just came across this vid and have a question. I'm looking at a 24 year old C4 and the original silver paint is in excellent condition would you recommend just after washing hand polishing with a product like turtle wax hybrid ceramic polish and then topping with a sealant or would you clay bar first then polish and seal?

[@garretts91]

Just used this kit today. I found it to be a pain to work with. The pad hangs up and has a weird feel going across the paint. I went back to the store and bought a Mothers California gold clay kit and re-clayed the car. The mothers kit pulled quite a bit off the Meguiar's kit missed.

[@davidbates5310]

Brian, love your videos but didn't understand the clay test. We all know water is not a lubricant, why not use the QD supplied in the kit?? Would've made a lot more sense, to me anyhow Cheers

[@clairvoyantdetails8423]

So my car is ceramic coated, but it feels like it needs to be clay barred, because of the contaminates, a iron wash did not remove them, I can feel them in the paint, what do you recommend to remove these so my paint is smooth again? I dont want the clay barring to mar the paint/coating though.

[@AlexGarcia-gy8hh]

Nice video bro , I have a question ? I have a 2010 Chevy Silverado the paint on it is super slick I can run my fingers on it and not get stuck should I still clay it

[@niftyifty]

I'm going to clay and polish my car for the first time. Polisher just arrived in the mail. Do you have a Polish recommendation for beginners?

[@lafeyetteransom1907]

Thnx B!

[@richardseem7948]

great video and product review good friend. this kit makes about as much sense of dropping a deuce and putting on clean draws.w/o wiping...lol.left u few emails and texts. thanks again buddy.

[@RMLeLoup]

Lets say, I go through a full works carwash drive through, the everything maxed out whatever they offer fancy shmancy package etc. I use micro fiber cloths, and dry off as much as possible. I drive home (10-20mins hwy). I park on driveway. - I apply this. Would this be a good after product post carwash/post dry on a warm day? The vehicle is approx 7 yrs old, black paint (tuexedo black metalic flek stuff)

[@justinhernandez1659]

hi, what's the top three sythinc waxes you recommend for shine and durability. $15 and under

[@satulytman]

Hi Brian, I am new to detailing and recently picked up an Adams mini swirl killer kit for correcting smaller areas on my own vehicles. Looking for a recommendation for a 5" to 6" da polisher, probably a 15 mm throw machine. I am happy with products I have bought from Adams, and leaning toward getting their 15 mm swirl killer mystery deal kit. If it is anything like the mini swirl killer mystery deal, it will come with a couple sets of pads, some cutting and polishing compound, and a few other detailing items for $200. Does anyone have favorites among the 15 mm da machines, or advice on what to stay away from?

[@sir34ster]

Do you have to wax the car after or this is a stand alone detail wax buff. thank you

[@bu3abedsupra736]

Clay is a first start you would begin with , the detailer they added a ceramic into it so it’s a final touch it’s not good combination until they add a polish in between .

[@AnthonyScottGames]

How do you know by running the bag down the side of the car, if it needs to be clayed? Honest question.

[@andresfarias6054]

Hello friend good morning I would like your help I sent my car to paint a door and I see micro paint on my windows and I feel when I pass my hand over the paint rough. What can I do at home myself to repair it and what to use that I can buy not so expensive.

[@nicolasgrisetti2516]

I can use this kit After the Hybrid ceramic wax?

[@jackdale9249]

HI best ever is to use Bilt Hamber clay fr UK they have their own clay mine ! avail in S , M, H grades it is so pure they say and it is TRUE ! you can use just plain water for lube ! ! try it let me know what you think ? and update your video w/an addendum ? thx Jack

[@jdisdetermined]

The ceramic label is quickly getting ridiculous. Everyone is slapping it on every new product they make. We'll probably have "ceramic infused" microfiber towels at some point.. 😁 I doubt this kit is something most of us professionals will reach for, but it is a decent complete kit synthetic clay option available at local retail. The only synthetic clay I see in most stores is the Mothers Speed Clay, just the block, no clay lube, towels, etc. for around $25. I think a complete straightforward synthetic clay kit like this with zero guesswork might get more DIY guys into clay/decon, which is great. Thanks, Brian! 👍👌✌

[@kikcodog]

Isn't the QD included meant to be the lubrication for the synthetic clay disk to help avoid marring? Also, every synthetic clay product I've used required me to break it in on glass before using it on paint because they have all had a coating over the rubber to protect it during packaging. Does Megs not require a glass break in? I use a lot of quality QD or clay lube during claying and I have never run into a case where it marred to the point I noticed it and thought I had to polish. I use a lot of lube - like 24oz for a sedan. Maybe more if needed. If the clay isn't hydroplaning I add more lube. I first clayed around 2000.

[@apexdetail85]

This clay also needs break in on glass...yes. I use ONR as my clay lube...for the most part. Works great.

[@giogamer4825]

Can you use this on the inside of your rim?

[@jimmyqballs]

The video quality looks good. Are you filming in 4K? Even if you film in 1080p, if you render in 4K and upload to youtube in 4K, you'll get far better encoding and the 1080 video will look far nicer in "4K" if that makes sense

[@apexdetail85]

I am now recording in 4K.

[@GBxDynamiicZz]

Great Video ! Have you ever used any feynlab products, can you get them where you are ? I've never seen any of them on the channel. What is your opinion on the line ?

[@apexdetail85]

I have not tried them as of yet.

[@jacobverdugo2793]

Does it repeal water ?

[@DadnCruz]

Cool bro men that is cool

[@elilee9112]

Brian - you commented on the Subaru test panel - paint has soft paint. Also in previous comments Japanese and GM has soft. Can you provide a list or produce a video on which cars have the hard or soft? I am more concerned if I have to be work on soft paint and be aware (use less aggressive pads and products). Trusting your expertise I can then have a heads up approach. Again thanks for the info on you KZbin channel on so many topics.

[@apexdetail85]

I would love to...but the list would be endless. Clear coat is now changing from year to year.😥

[@Schpliffy]

Should have tested marring with detailer and not water, as kit intended.

[@pebble6697]

Use what works best and fastest and is the most cost effective

[@DaveSomething]

no matter how lubricated and clean the pad was, it would still occasionally grab and leave a nice black streak on my silver hoopdy... watched this to see if I was doing something wrong. guess not... it does work, but I'm not a fan of it.

[@E85_STI]

That’s for sure Subaru paint is so dang soft but I’m here looking for either a clay pad or this kit.

[@edubb2491]

Yea..honda too!!

[@E85_STI]

@@edubb2491 yeah it sucks my shit leaves tiny swirls here and there with the microfiber and I’ve been detailing for over 10 years so I know what pile to get remove the tag,etc…

[@edubb2491]

@E85_STI so is this clay kit good for not scratching?

[@tundrawhisperer4821]

On a side note, when the “Detailing Coroner” (Brian at Apex Detail 😁) has a moment. Could he cut into the new Griots G8 3” polisher, to break down its build components. Love it when you do this. I’m interested in buying one, but would like to see how it was built. Thx

[@apexdetail85]

Absolutely.

[@tundrawhisperer4821]

Apex Detail That’s awesome Brian! Thank you, Thank you, Thank you!

[@tmw139]

New camera is much better. Noticed immediately.

[@eze8024]

Seems weird to use detailer during the clay step, before the polish wax seal stage. Figured you'd want to use some type of soap/shampoo with the clay and use the detailer after everything else 🤷‍♂️

[@sentomorrow]

Wow, major improvement in the camera quality, visible and notable step up.

[@PJ_TIPS]

Are you using this correctly?

[@henryfreeman6113]

Thoughts on the optimum clay towel?

[@apexdetail85]

The only synthetic clay I enjoy comes from Nanoskin.

[@RCFlyer85]

I understand you're trying to make a point but did you really just use plain water as a clay lube?

[@frederickwatkins2017]

He used it to "prime" the clay disc then used the detailer spray to somewhat lube the surface ,I guess....

[@benjaminwallace4626]

I’ve already used this and I can say it works quite nicely I’ve used it on 6 cars already and it still seems good though I wouldn’t use it on maybe more than 5 cars

[@kikcodog]

If you want a clever, time saving way to clay with a synthetic clay, check out this technique from Joe at Next Level kzbin.info/www/bejne/rpWxeoGde9mroq8 skip ahead to 2:47. You can do this with synthetic but it will break down regular clay faster than usual. If you don't care you can do it with either.

[@benjaminwallace4626]

BigOldDog Wow I’ve never thought of doing it that way I always wash them clay with dish soap water to help remove old wax so it’s easier to compound/polish

[@kikcodog]

@@benjaminwallace4626 The only issue is, if you use traditional clay, the soap will cause it to break down faster than if you use a quick detailer or clay lube. SInce synthetic clays are just rubber, the soap doesn't negatively affect longevity at all. Using the Big Red Sponge the way Joe does is a great time saver and a great way to minimize any marring. It is similar to how some body shop guys do production wet sanding.

[@ptheledge5390]

Would you say the clay pad is just as effective as a clay bar?

[@apexdetail85]

It is close ...but to me ...nothing beats a mild clay bar.

[@timhaz5170]

Can the detailer be used on a wet car to help dry whilst topping up protection ?

[@apexdetail85]

Yes.

[@georgekirby3361]

Seems like McGuires took two buzz words/Products, in detailing and slapped some pretty packaging on it and is going to sell it to people that don’t understand when or how to properly use them.

[@Piglet6256]

a unusual or weird clay kit is the words you were looking for :P Did i see a dunkin donuts coffee cup?? mmm i loved those donuts when i was in the US :P

[@apexdetail85]

Krispy Kreme or Duck Donuts are much better! I would send you some...but would be rather stale by the time they get there!😂

[@Thamac15]

I’ll pass and keep using the chemical guys clay bars and Clay Lube spray. I’ve always like their clay kits over others.

[@earley226]

that tag on the microfiber was making me nervous

[@huronautodetailing]

Not as nervous as his seat driving skills....lol

[@RD-nc8xt]

I rip off the tags duh

[@cousinvinny7990]

cant beat plumbers putty good old h20 and elbow grease

[@frederickwatkins2017]

Looks like you can do more damage to the paint using that ,instead of just using the ceramic wax

[@Jeeper1378]

Wouldn’t u want a panel with contaminants to test the clay?

[@apexdetail85]

I wouldnt use one if there wasnt contaminates.🙂

[@eddiel7033]

I'm very sick of all this ceramic b.s. on labels. Just because there's a trace of SiO2 or silozane in the formula doesn't make it ceramic. Can I drop an onion sliver in a bottle of water and sell it as French onion soup?

[@t5698]

ur so right edd. all they wana do is scam people for money

[@scurfie2343]

I own a dark red car and I'm waiting for the next big thing: graphite protection.

[@jusb1066]

You can rub it with some coal 😏

[@bhatti81]

You need to be a bit generous with the spray.. A list mist like a QD (similar to what you're doing) would most likely cause the clay rubber to mar and this kit is designed for consumers that wont be polishing afterwards.. So you should spray liberally enough that the entire surface is misted.. (more like 150-200ml per car)

[@johnketuroskey6293]

the new camera is a great picture......clear and sharp....ck emails from georgewnstn….have a good day...see u at 4ish for gloss readings...lol

[@apexdetail85]

Thanks...I will check emails soon.

[@bigd9848]

The camera is excellent ✊The kit is not my cup of tea 👍🏻Great video Brian 💎

[@JFomo]

What is "ceramic" about that clay pad?

[@nicorallysport]

The sio2 is in the meguiar's hybrid ceramic detailer, if that's what you wanted to know!

[@apexdetail85]

Only the Detailer contains Sio2.

[@RGS6791]

Well Don’t see the point of this kit. But in your test which will abrade/marring more the clay or the clay disc sponge of the kit, think the demonstration wasn’t fair enough, water is a natural lubricant as you said, but maybe if you used another “specifically” clay lubricant (sort of speak)maybe the marring would be less with both clay options. Just as a comment. As always execellent videos/info. Thanks

[@berryduke6823]

Ollie's is now selling it for $4.99.

[@benjaminwallace4626]

One nice thing is the foam pad makes it harder to drop the clay bar

[@mikeyp2447]

I will pass on this one.🙂

[@richardmedina6944]

#1

[@gtbigdog3507]

I watch your KZbin channel more than I watch my kid channel

[@apexdetail85]

Hahahah..👍

[@MNpicker]

Nah i'm good..👍🏼

[@darkman8022]

Nah I’m good maybe the just detail spray

[@onrdetailingnews802]

Try the new meguiars quik wax and torcher test it that stuff is bad i tested it give that a try its 15 bucks at autozone lol

[@60trickpa]

I don't clay my cars anymore after listening and watching you. I think this kit costs too much.

[@edubb2491]

Do you have alot oc cntaniments?

[@klasseact6663]

The ceramic thing is turning into "limited edition" status, meaning....it's not special anymore, like how TURBO was used back in the 80's, I remember sunglasses that said TURBO, marketing😑

[@jimboh5131]

HAHA! I remember those sunglasses!

[@unremind]

The big difference is dirt will sink into the clay and grind less. With this pad, dirt will not sink in and it will roll and scratch the paint more. You should at least clean it after each small section if you are using something like this, but why use it at all when clay is safer?

[@arapaimagold8088]

And it still gonna kill the beading on coated cars.

[@peterjurenovskis5933]

Not for me

[@glumdogtrillionaire]

Retailers not detailers.

[@edubb2491]

You prob got marred..because you didnt spray nearly enough.. super soak the pad and car surface!!!

[@melissascipione1548]

Putz

[@JTBlair-nw6gb]

Meguiars just wants your money. They're not concerned about you doing things the correct way. They put the word ceramic on anything and mark it up 20%.

[@s.d.h.3t981]

This dude is a Meguiar's hater

[@cobra454tim]

Too much marketing !

[@grtu4252]

I'll pass.

[@edruiz6364]

Good video but, no thanks.